This Solicitation opportunity from Department Of Defense was posted on August 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

STUD, PLAIN

Closed

SPE4A6-26-T-14QSFederal

Submission Closed08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332722

New

DIBBS

Supply of Flat Washers (NSN 5310-01-625-5545)This subcontract involves the supply of 54 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The required parts are identified by NSN 5310-01-625-5545 and Boeing PN 4M405-001, with delivery terms set as FOB Origin. Performance will take place in New Cumberland, Pennsylvania. The contractor must adhere to strict quality and compliance standards, including SAE AS9003 or ISO 9001 quality systems and a CMMC Level 2 Self-Assessment. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging and shipment marking following ASTM D3951 and MIL-STD-129 respectively.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturer of Self-Locking Gang Channel Nut Assemblies (NSN 5310-01-030-1803)This subcontract involves the fabrication and supply of 17 self-locking gang channel nut assemblies for the DLA Weapons Support ASC Commodities Division. The hardware must be manufactured according to NSN 5310-01-030-1803 and the DLA Master List of Technical and Quality Requirements using precision machining. All materials used in production must comply with the Buy American Act. The selected provider is required to maintain CMMC Level 2 certification and adhere to ITAR and EAR compliance standards. Completed units are to be delivered FOB Origin to DLA Distribution in Jacksonville, Florida. The response deadline for this opportunity is November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Sleeve Nuts (PN 497A63102-2)This subcontract involves the manufacture of 80 precision sleeve nuts, part number 497A63102-2, for the DLA Weapons Support ASC Commodities Division. The hardware must be fabricated using precision machining equipment and must be entirely free of mercury compounds in accordance with IP056. All units are to be delivered with a Certificate of Conformance and must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The selected provider must maintain CMMC Level 2 certification and ensure full compliance with ITAR, EAR, and the Buy American Act. Performance for this contract will take place in Bremerton, Washington. Interested parties must submit their responses by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of Machine Bolts (NSN 5306001698639)This subcontract involves the manufacture and supply of 170 specialized machine bolts (NSN 5306001698639) for prime contractors supporting DLA Weapons Support ASC projects. The contractor is required to fabricate the bolts in strict accordance with Air Force Drawing 201416605 and RC001 source approval requirements. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards for final delivery to Robins Air Force Base. Compliance with several federal regulations is mandatory, including DFARS 252.204-7012 for cybersecurity, as well as the Buy American Act and the Berry Amendment. The project falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305017060326)This subcontract involves the manufacture or procurement of 30 socket head cap screws, identified by NSN 5305017060326 and part number 3M1345-도BA, to support prime contractors on DLA Weapons Support ASC projects. The supplier must ensure all units adhere to DLA Master List requirements RA001, RP001, RQ011, and RQ017, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. Once completed, the 30 packaged screws are to be delivered to the Naval Air Systems Command Central Kitting Activity. This effort is managed under the Department of Defense via the DLA Weapons Support ASC Supplier OEM Division, with performance centered in Orange Park, Florida.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Screw Thread Insert (NSN 5325-01-647-8996)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of a screw thread insert meeting NSN 5325-01-647-8996 specifications. The contractor is responsible for delivering one unit, ensuring that packaging adheres to MIL-STD-2073-1E Preservation Method 33 and marking complies with MIL-STD-129. Performance will take place at Camp Pendleton, California. The contract mandates strict adherence to domestic sourcing requirements per the Buy American Act and the Berry Amendment. Additionally, the provider must maintain cybersecurity compliance in accordance with NIST SP 800-171. Responses to this solicitation are due by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Screws (NSN 5305-14-51-4157-6)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Machine Bolt Fabrication (NSN 5306015554678)This subcontract involves the fabrication of 609 specialized machine bolts under NSN 5306015554678 for the DLA Weapons Support ASC Commodities Division. All units must be produced according to Basic Drawing 19207 12419091 Revision C using precision machining equipment, with a strict prohibition on additive manufacturing. The contractor is required to ensure all materials are compliant with the Buy American Act and the Berry Amendment, and finished products must be packaged in accordance with MIL-STD-2073-1E. To be eligible, the provider must maintain CMMC Level 2 compliance and hold either an ISO 9001 or SAE AS9003 quality system certification. The project falls under NAICS code 332722 and will be performed in New Cumberland. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Self-Locking Hexagon Nuts (NSN 5310-01-723-0284)This subcontract involves the manufacture or sourcing of 50 inspected self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The hardware must strictly adhere to NSN 5310017230284, Basic Drawing NR 53711 8508014, and Part Piece Number 820-8508014-8-06A. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The contractor is required to follow specific military standards for quality assurance and logistics, including sampling per MIL-STD-1916 or ASQ H1331, and marking and packaging according to MIL-STD-129 and MIL-STD-2073-1E. Additionally, the provider must ensure full compliance with DFARS 252.225-7001. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supplier of Flat Washers (NSN 5310009143234)This subcontract involves the procurement of 2,000 flat washers, identified as NSN 5310009143234 and Part S8157N8-010, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with the DLA Master List of Technical and Quality Requirements. Delivery is required FOB Origin to Hill AFB, and the use of additive manufacturing is strictly prohibited. Compliance is mandatory across several critical standards, including MIL-STD-130N, MIL-STD-129, and ASTM D3951 for packaging. Additionally, the supplier must meet CMMC Level 2 cybersecurity requirements and adhere to the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 4, 2026, under NAICS code 332722.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Flat Washers (NSN 5310-01-723-4415)This subcontract involves the manufacture of 202 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 5310-01-723-4415, Goodrich Corporation part number 80-835, and TDP Rev A Gen 1 specifications. Production requires the use of precision machining or stamping equipment and materials that comply with the Buy American Act. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling standards, with a strict prohibition on the use of hexavalent chromium. The final deliverable consists of 202 finished and inspected washers. The project is managed under NAICS code 332722 for the Department of Defense, with performance located in New Cumberland.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturer of Pin-Rivet Collars (NSN 5320-01-177-3224)This subcontract involves the fabrication and supply of 869 Pin-Rivet Collars for prime contractors supporting DLA Weapons Support ASC projects. The manufacturer must produce the units according to NSN 5320-01-177-3224 technical specifications and adhere to DLA master list quality standards RA001, RC001, RP001, RQ011, and RQ017. Due to the nature of the components, the use of precision machining equipment is required, and all materials must comply with the Buy American Act. The completed units are to be delivered FOB Origin to the DLA Distribution Depot located at Tinker AFB, Oklahoma. This procurement falls under NAICS code 332722 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days

AI Contract Overview

This contract is for the procurement of 48 plain studs, identified by NSN 5307-01-439-0103 and part number 526C708034 from Northrop Grumman Systems Corporation, under solicitation SPE4A6-26-T-14QS. The item is classified as a critical application item and is designated as a commercial item of a type, with no shelf life requirement and no need for item unique identification. Delivery is required FOB origin within 418 days after receipt of order, with a specified need ship and delivery date of October 10, 2027. The product must be packaged in accordance with MIL-STD-2073-1E using specified preservation methods, and marked per MIL-STD-129 with no special marking required. Palletization must comply with DLA packaging requirements. The item must be identified in compliance with MIL-STD-130N dated November 16, 2012, and no mercury or mercury-containing compounds may be intentionally added to the product or come into direct contact with it, except in specific exempted applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Mercury is also strictly prohibited in preservation, packaging, and labeling. Quality assurance is governed by stringent inspection and sampling protocols; inspection and acceptance occur at origin, and the manufacturer’s system must meet minimum requirements of SAE AS9003 or ISO 9001 tailored to SAE AS9003. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with unspecified attributes treated as major. Acceptance criteria require zero non-conformances if MIL-STD-105/ASQ Z1.4 is used for sample sizing. Critical, major, and minor attributes must be assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and references the DLA Master List of Technical and Quality Requirements for applicable R and I codes. Additive manufacturing is prohibited unless explicitly authorized. Offerors must comply with the Berry Amendment and Buy American Act, submit a valid

General Info

48 units of non-manufactured item, FOB origin, delivery Oct 10, 2027, $48 each, MIL-STD compliant, mercury prohibited, DLA procurement.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

RFQ SPE4A6-26-T-14QS Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 9

Solicitation

Response DeadlineAug 17

Deadline has passed

Submission Closed

08/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

MALIK LOWE

contact@example.gov

+1 (555) 000-0000

Full Description

STUD,PLAIN
STUD, PLAIN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CONFIGURATION CONTROL ITEM IAW CITED DRAWING AND/OR PART NUMBER.
DOCUMENTATION REQUIREMENTS OF CLAUSE 52.211-9042 APPLY FOR
NEW OFFERORS NOT CITED HEREIN.
ITEM IDENTIFICATION IAW MIL-STD-130N, DTD 16-NOV-2012.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
SPE4A6-26-T-14QS
SECTION B
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
NORTHROP GRUMMAN SYSTEMS CORPORATION 90099 P/N 526C708034
IAW REFERENCE
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017697486 0001 EA 48.000
NSN/MATERIAL:5307014390103
DELIVERY (IN DAYS):0418
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
SPE4A6-26-T-14QS
SECTION B
PR: 7017697486 PRLI: 0001 CONT’D
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:10/10/2027 Original Required Delivery Date:10/10/2027
SPE4A6-26-T-14QS NSN/Part Number: 5307-01-439-0103 Quantity: 48 EA Purchase Request: 7017697486QTY: 48 Delivery: 418 days ADO