Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

STUD, WELDING

Active
SPE4A1-26-T-1482Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract solicits the procurement of 169 units of a welding stud identified by NSN/Part Number 5307-01-529-7683, with delivery expected within 166 days after the award date. The solicitation number is SPE4A1-26-T-1482, posted on February 24, 2026, with a response deadline of March 4, 2026. The acquisition is managed by the Department of Defense’s Aviation Supply Chain office, with performance located in New Cumberland, PA, under NAICS code 332722. The primary contact for this solicitation is Jade Stringfield. The contract incorporates Defense Logistics Agency (DLA) packaging, technical, and quality requirements as detailed in the DLA Master List, enforcing key provisions such as quality conformance inspections, physical identification and marking of bare items, and strict handling of export-controlled technical data under ITAR and EAR regulations. Only contractors approved through DLA’s US/Canada Joint Certification Program and trained in proper export controls may access sensitive technical data involved in this procurement. Additionally, government identification must be removed from non-accepted supplies, and drawings relevant to this solicitation are available through DLA’s specified online portals during the open solicitation period.

General Info

Procurement of 169 welding studs, delivery in 166 days, DLA quality, ITAR compliance required.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-T-1482.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Jade Stringfield
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD,WELDING
STUD, WELDING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(53711) NAVAL SEA SYSTEMS COMMAND
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5307-01-529-7683 Quantity: 169 EA Purchase Request: 7015603277QTY: 169 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED
Solicitation # SPE4A6-26-T-09HS
The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-Q-1419
The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDING
Solicitation # SPE4A1-26-T-0556
The contract pertains to the procurement of 80 units of STUD, WELDING with NSN/Part Number 5307-01-529-7683, under solicitation SPE4A1-26-T-0556, issued by the Department of Defense through the Aviation Supply Chain office. The response deadline is August 5, 2026, with delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and compliance with DFARS 252.225-7048 is mandatory. Only contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization may access the associated technical data. Additionally, the item must comply with DLA packaging requirements, quality conformance inspections, and physical identification and marking standards. Drawings are accessible via the DIBBS portal during open solicitation, and the place of performance is specified as New Cumberland, Pennsylvania, 17070-5002. The primary point of contact is Jade Stringfield, reachable via email and phone provided.
AVIATION SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-04MJ
The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-09HR
The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-08RR
The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, EX
Solicitation # SPE4A6-26-T-57S2
The contract is for 268 self-locking nuts with an extended washer and hexagonal configuration, identified by NSN 5310-01-342-2011, under solicitation SPE4A6-26-T-57S2. The product must meet the latest revision of the original equipment manufacturer’s drawing and comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Identification marking of the nuts must follow MIL-STD-130N dated 16 Nov 2012, including manufacturer’s logo, lot number, and material identification, excluding any government-specific identifiers on non-accepted supplies. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The supplier must also maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and handle covered defense information appropriately. The delivery deadline is 169 days from award, and the place of performance is Tracy, CA, 95304-5000. The solicitation was posted on July 31, 2026, with a response deadline of August 5, 2026, and the contracting office is the ASC Commodities Division of the Department of Defense, with Alexander Sotos as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT
Solicitation # SPEFA5-26-Q-0066
This contract specifies the procurement of a single NAS1958C28R bolt under part number 5306-LN0034747 with a firm fixed price and no variance in quantity allowed. The item must be delivered within 30 days after the award date to the destination specified, with inspection and acceptance occurring upon delivery. The product must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per ASTM D3951 and labeling requirements per MIL-STD-129, with precedence given to the DLA Master List when conflicts arise. Packaging must align with DLA-specific procurement guidelines, including palletization per RP001, and sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The unit of issue is each, and physical identification of the bare item must adhere to RQ017 requirements. The delivery is directed to the Fleet Readiness Center at Cherry Point, North Carolina, with the solicitation number SPEFA5-26-Q-0066 and a response deadline of August 7, 2026, with a required ship date of July 8, 2026.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 14 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-Q-0942
The contract involves the procurement of 55 units of a clamp and coupling nut identified by NSN 0001S00000053 under solicitation SPE4A7-26-Q-0942, with a delivery requirement of 142 days after award. Technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Items must be physically marked in accordance with RQ017, and sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified. Critical, major, and minor attributes are to be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and inspection and acceptance occur at the manufacturer’s facility. All data and communications are subject to covered defense information policies. The contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense, with Dedrick Benson as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
BOLT SET, ENGINE SHA
Solicitation # SPE4A6-26-T-09LA
The contract pertains to the procurement of one set of bolt assemblies designated as BOLT SET, ENGINE SHA with NSN 5306015786524, issued under solicitation SPE4A6-26-T-09LA by the ASC Commodities Division of the Department of Defense. Delivery is mandated within five days after order placement, with title and risk of loss transferring to the Government at origin under FOB ORIGIN terms, while inspection and acceptance occur at the designated destination: Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC. Packaging must adhere to ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, which takes precedence, and all packaging must be labeled per MIL-STD-129 with correct unit of issue (SE) and quantity per unit pack as specified. Palletization must comply with DLA Packaging Requirements RP001, and shipment must be made by the fastest traceable means, prohibiting parcel post; the RDD code 777 and supplier address SIG: A indicate specific logistics directives. Quality assurance requires sampling based on MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with zero non-conformances mandated in the sample unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0, respectively. The item is classified as a Critical Application Item and subject to cybersecurity compliance under CMMC Level 2 Self-Assessment, with Covered Defense Information governed by RD002. Unit identification is not required as per DFARS 252.211-7003(c)(1)(i), though supplier representations must include UEI and CAGE Code if providing covered defense telecommunications equipment. All hazardous materials must bear labels complying with 29 CFR 1910.1200 and DFARS 252.223-7001, with mandatory submission of MSDS and labeling plans prior to award. Contract clauses include mandatory representations for small business status, trafficking in persons compliance, employment eligibility, sustainable product use, and accelerated payments to small business subcontractors, along with safeguarding requirements for contractor information systems. The solicitation requires electronic submission via DIBBS by July 31, 20
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
CASTER, SWIVEL
Solicitation # SPE7L1-26-T-849S
The contract solicitation SPE7L1-26-T-849S is for the procurement of two swivel casters with NSN 5340-01-574-2077 under the Department of Defense’s Defense Logistics Agency, requiring delivery to Blount Island Command in Jacksonville, Florida, within five days of order placement, with a required delivery date of July 16, 2026. All items must be shipped FOB origin, with title and risk transferring upon loading onto the carrier, and inspection and acceptance occurring at the destination. Packaging must strictly comply with DLA’s RP001 packaging requirements, with hazardous materials as defined by FED-STD-313 requiring adherence to Technical Requirement IP025 and non-hazardous materials conforming to ASTM D3951, subject to precedence by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must follow MIL-STD-129, including proper unit of issue and quantity per unit pack, with palletization executed in accordance with RP001. The use of parcel post is prohibited; shipments must be sent via the fastest traceable means to the designated freight shipping address. The contract incorporates numerous FAR and DFARS clauses governing compliance with sustainable products, hazardous material identification, cybersecurity protections under NIST SP 800-171, trafficking in persons, employment eligibility verification, and restrictions on covered defense telecommunications equipment. Offerors must hold a valid Unique Entity Identifier and CAGE Code, submit representations regarding small business status and socioeconomic classifications via SAM.gov, and disclose any involvement with covered defense telecommunications equipment or services. All proposals must be submitted electronically through the DLA Internet Bid Board System by the August 5, 2026 deadline, with invoicing post-award required through the Wide Area WorkFlow system. Although the contract includes standard pricing and CLIN structure, no unit or total prices are provided, rendering the financial value undetermined at this stage. The contracting officer will specify the contract type and other administrative details upon award, including payment office and contracting officer representative information.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
CASTER, RIGID
Solicitation # SPE7L1-26-T-849M
The contract solicitation SPE7L1-26-T-849M calls for the procurement of two rigid casters with NSN 5340-01-574-2074, to be delivered within five days of award to Blount Island Command in Jacksonville, Florida, under FOB Origin terms. The quantity is fixed at two units with zero variance allowed, and acceptance occurs at the destination point, where the Government will inspect for compliance with all technical, packaging, and marking requirements. Packaging must strictly adhere to MIL-STD-129 for labeling and barcoding, with palletization governed by DLA’s RP001 requirements; hazardous materials, if any, must be packaged per TQ Requirement IP025, while non-hazardous items must meet ASTM D3951 unless overridden by higher-priority specifications from the DLA Master List of Technical and Quality Requirements. All shipments must use the fastest traceable means—parcel post is prohibited—and must be addressed to the specified Government logistics unit. Cybersecurity compliance is mandated through the CMMC Level 2 Self-Assessment and adherence to NIST SP 800-171 controls, with requirements to safeguard covered defense information and report cyber incidents. The contractor must comply with anti-trafficking, employment eligibility verification, sustainable products, and whistleblower protections clauses, alongside restrictions on using prohibited telecommunications equipment under Section 889 of the NDAA. Subcontract flowdowns are required for cybersecurity, hazardous materials handling, ocean transportation, and equipment prohibition clauses. Invoicing must be submitted electronically via WAWF, and payment is subject to DoDAAC-based accounting systems. Offerors must provide a current UEI and CAGE code and represent their small business status, with affirmative responses triggering additional disclosures. The solicitation includes FAR and DFARS clauses covering contract type, pricing modifications, and inspection procedures, though actual pricing details are not included in the document. The required delivery date is July 16, 2026, and proposals must be submitted through the DIBBS portal by the deadline of August 5, 2026.
LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 332722
New
DIBBS
STUD, WELDING
Solicitation # SPE4A1-26-T-2396
The contract pertains to the procurement of 201 welding studs with NSN 5307-01-529-7683 under solicitation SPE4A1-26-T-2396, issued by the Department of Defense’s Aviation Supply Chain through the Defense Logistics Agency. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date depending on the acquisition size. The delivery deadline is set for 168 days after order placement, and responses must be submitted by July 9, 2026. Technical data associated with this item is controlled under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, regardless of location. Access to this data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been explicitly approved by DLA. Item marking and physical identification requirements are enforced, and removal of government identification from non-accepted supplies is prohibited. The place of performance is designated as New Cumberland, PA, with Jade Stringfield as the primary point of contact for inquiries.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A1-26-T-2397
The contract pertains to the procurement of 45 nonmetallic grommets identified by NSN 5325-00-960-8257, issued under solicitation number SPE4A1-26-T-2397 by the Defense Logistics Agency, a branch of the Department of Defense. The solicitation was posted on July 1, 2026, with a response deadline of July 9, 2026, and falls under NAICS code 339993, indicating classification within miscellaneous manufacturing industries. The procurement is managed at the federal level with no set-aside provisions specified, and the place of performance is not designated beyond a United States country code. Interested parties must submit responses through the official DIBBS platform before the deadline to be considered for award.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
STUD, WELDING
Solicitation # SPE4A1-26-T-2319
A solicitation for 101 welding studs with NSN 5307-01-529-7683 has been issued under contract number SPE4A1-26-T-2319 by the Defense Logistics Agency, a department of the U.S. Department of Defense. The solicitation was posted on June 14, 2026, and responses are due by June 22, 2026, with no set-aside classification specified. The item falls under NAICS code 332510, indicating it relates to forging and stamping operations within the industrial machinery manufacturing sector. Performance of the contract is not assigned to a specific location, and no point of contact information is provided within the posting. All proposals must be submitted through the DIBBS platform via the linked solicitation page.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Sampling ServicesThe contract requires the performance of quality inspection and zero-defect sampling of delivered valves in accordance with MIL-STD-1916 or an equivalent standard, ensuring rigorous adherence to military-grade quality controls. This subcontract is part of the Aviation Supply Chain initiative under the Department of Defense, with performance specifically tied to the location of Virginia Beach, Virginia, 23459-3018. The work involves precise sampling procedures designed to achieve defect-free outcomes, demanding high levels of technical expertise and compliance with established defense inspection protocols. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, indicating a tightly managed procurement timeline. The NAICS code 541330 classifies this as an engineering services contract, suggesting a focus on specialized technical oversight rather than general manufacturing. Participation is limited to contractors capable of meeting military quality standards, and while no set-aside designation is specified, all bids must align with the contractual requirement for zero-defect outcomes in valve inspection and sampling. All submissions must be made through the designated DIBBS portal at the provided web link.
Engineering Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Safety Data Sheet (SDS) PreparationThe contract requires the identification of hazardous materials within valves or their packaging and the preparation of Safety Data Sheets that meet strict OSHA and DFARS regulatory standards. This subcontract is part of the Department of Defense's Aviation Supply Chain initiative, with performance duties centered in Virginia Beach, Virginia, at the ZIP code 23459-3018. The work must ensure full compliance with federal safety and documentation mandates, particularly for defense-related procurements, and demands precise handling of chemical and material data to support safe transportation, storage, and use. All documentation must align with current federal occupational safety guidelines and defense acquisition regulations without exception. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, indicating a narrow window for proposal submission. The North American Industry Classification System code 541620 reflects that this effort falls under environmental consulting and related services, underscoring the technical and regulatory expertise required. Although no specific set-aside designation is provided, the contract is explicitly structured as a subcontract and is accessible through the DIBBS portal for qualified contractors. All submissions must demonstrate proven capability in hazardous materials identification and compliance documentation tailored to military supply chain requirements.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and Marking ServicesThe contract requires full compliance with MIL-STD-129 and MIL-STD-2073-1E standards for the packaging, labeling, and marking of delivered valves, ensuring all physical and documentation requirements meet rigorous military specifications. This includes the provision of Safety Data Sheets and all necessary hazard documentation to support safe handling, storage, and transportation in accordance with Department of Defense protocols. The work must be executed to guarantee traceability, durability, and standardization of markings under demanding operational conditions. The solicitation is classified as a subcontract under NAICS code 561910, issued by the Aviation Supply Chain within the Department of Defense, with performance required at Virginia Beach, Virginia, zip code 23459-3018. The proposal deadline is August 7, 2026, and the posting date was July 30, 2026. All submissions must align with the detailed technical and administrative expectations outlined in the referenced military standards, with no flexibility allowed for deviations in labeling, packaging materials, or hazard communication protocols.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
DIBBS
Fuel System Valve SupplyThe contract seeks the supply of four commercial fuel system valves that must meet military specifications and adhere to defined packaging standards, ensuring compatibility and reliability in defense aviation applications. The requirement is categorized as a subcontract under NAICS code 332994, indicating it falls within the miscellaneous fabricated metal products manufacturing sector, and is managed by the Aviation Supply Chain under the Department of Defense. The valves are intended for performance at a designated location in Virginia Beach, with a delivery and compliance deadline set for August 7, 2026, following a solicitation posted on July 30, 2026. All bidders must ensure their proposals align with military-grade requirements, including technical compliance, documentation, and secure packaging, despite the absence of a formal set-aside designation or specific small business preferences. The procurement is accessible through the DIBBS platform for response submission.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
DIBBS
Supply of Electrical Insulation Sleeving (NSN: 5970011082994)
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332998
New
DIBBS
Retaining Ring Supply (NSN: 5325014485082)The contract requires the supply of eight retaining rings identified by NSN 5325014485082, with strict compliance mandated for federal packaging, labeling, and hazardous material regulations. The solicitation falls under the NAICS code 332998 and is structured as a subcontract within the Department of Defense’s Aviation Supply Chain. Performance is designated to take place in Tracy, California, with a ZIP code of 95304-5000. The posting date is July 30, 2026, and all responses must be submitted by August 7, 2026, establishing a brief window for proposers to meet requirements and deliver the specified components under the outlined federal standards.
Enameled Iron and Metal Sanitary Ware Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and LabelingThe contract requires the provision of hazard warning labels and Safety Data Sheets for all hazardous materials used in production or packaging, ensuring full compliance with OSHA’s Hazard Communication Standard. This requirement is mandatory for award and must be accurately maintained throughout the contract term to ensure workplace safety and regulatory adherence. The work is scoped under NAICS code 541620 and is structured as a subcontract with a response deadline of August 7, 2026, following a posting date of July 30, 2026. Performance is required at Tracy, California, with the Department of Defense, through its Aviation Supply Chain organization, acting as the contracting authority. All deliverables must meet federal standards without exception and will be evaluated for completeness, accuracy, and timeliness in supporting the safe handling and use of hazardous substances on site.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 316210
New
DIBBS
Webbing Strap Manufacturing and SupplyA contract has been issued for the manufacture and supply of two units of aerospace-grade webbing strap, identified by NSN 5340015771775 and Part Number CA78732-001, to meet stringent military specifications regarding quality, packaging, and marking. The requirement demands a zero-defect standard, ensuring the product fulfills the rigorous reliability and performance expectations of defense operations. The contract falls under the NAICS code 316210, classifying it as a subcontract for textile product mills, and is managed by the Aviation Supply Chain division of the Department of Defense. Responses are due by August 7, 2026, with the solicitation posted on July 30, 2026, and the product must be delivered to the designated place of performance located in Tracy, California, with the ZIP code 95304-5000. The transaction is accessible through the DIBBS system under solicitations number SPE4A126T2503, indicating it is part of a formal government procurement process.
Footwear Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details