This Solicitation opportunity from Florida was posted on June 5, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Substation Power Transformer Mineral Insulating Oil Specifications

Closed

2024-32State & Local

Submission Closed06/12/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 324191

New

DIBBS

LUBRICATING COMPOUND, F

Solicitation # SPE4A6-27-T-7005

Solicitation SPE4A6-27-T-7005 is a small business set-aside request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of fluorosilicone lubricating compound. The requirement consists of three tubes, each containing 8.0 ounces, identified as a commercial off-the-shelf item under NSN 9150-00-482-6884. The item must adhere to basic drawing NR 18876 MIS-13144 Revision C and is subject to a 36-month extendable shelf life. Delivery is required by February 28, 2027, with the destination for both inspection and acceptance located in San Diego, California. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and OSHA Hazard Warning labels for technical approval prior to award. Packaging and marking must comply with MIL-STD-129, MIL-STD-290, and DLA packaging requirement RP001, with a specific prohibition against the intentional addition of mercury. Quality assurance is governed by MIL-STD-1916 and MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act, the Berry Amendment, and various DFARS cybersecurity and telecommunications restrictions.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-1964

Solicitation SPE4A5-27-T-1964 is a fixed-price contract issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 34 units of aircraft grease, specifically Dow Silicones Corporation P/N Molykote 55 O-Ring Grease (NSN 9150015920468). Each unit consists of 1.0 kilogram. The item is classified as a Commercial Off The Shelf product and does not have a shelf life requirement. Delivery is required within 116 days to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and safety standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 and MIL-STD-2073-1E for marking and packaging. Because the material is hazardous, the contractor must provide approved SDS and OSHA hazard warning labels, ensuring compliance with 29 CFR 1910.1200. Key regulatory requirements include the Buy American Act, DFARS 252.204-7012 for cybersecurity, and the use of the Wide Area WorkFlow system for electronic invoicing. All quotes must be submitted via DIBBS, and offerors are encouraged to provide quantity ranges to accommodate demand volatility.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

136584 LUBRICANT, CLEANER, LEAK DETECTOR, AND EXPANDING FOAM

Solicitation # 232724

POSTED

DEADLINE

LUBRICATING OIL, ENGINE

Solicitation # SPE4A6-27-T-6952

Solicitation SPE4A6-27-T-6952, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of 36 gallons of engine lubricating oil. The required material is identified by NSN 9150017227982 and corresponds to Deere & Company and James River Equipment Inc part number TY26667. This item is classified as a Commercial Off The Shelf product and does not have a shelf life requirement. The unit of issue is defined as a 5.0 gallon pail. Delivery is set for FOB Destination with a need ship date of February 15, 2027, and an original required delivery date of October 31, 2027. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Because the material is hazardous, the contractor must provide SDS and OSHA hazard warning labels for approval by technical personnel prior to award. Quality assurance will be conducted at the destination using sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American and Balance of Payments Program. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding of contractor information systems, and restrictions on covered defense telecommunications.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

9150--Turbine Engine Oil

Solicitation # 36C26227Q0069

The Department of Veterans Affairs is issuing a Sources Sought Notice and Request for Information to identify qualified sources for turbine engine oil equivalent to Castrol Aero J5 (Part# 15AF27). This is not a formal solicitation but a planning effort to conduct market research and determine the appropriate acquisition strategy. The requirement consists of five 55-gallon drums of synthetic-base oil that must cover three classes of gas turbine engine lubricating oils, be intended for aircraft engines with a nominal viscosity of 5 centistokes at 100 degrees Celsius, be identified by NATO Code Number 0-156, and maintain full compatibility with MIL-PRF-23699F approved oils. Interested respondents must submit their capabilities statements and business information via email to the designated contract specialist by November 2, 2026. The government is specifically seeking information regarding business size under NAICS 324191, socioeconomic status such as SDVOSB or VOSB, and compliance with the Buy American Act and the Non-Manufacturer Rule. Responses should include the company's SAM.gov Unique Entity ID, lead times, and any existing federal contract vehicles like GSA or NASA SEWP. While general pricing is encouraged for market research purposes, it will not be used for an award, as this notice does not constitute a binding offer.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Solicitation # SPE4A0-27-T-0318

This fixed-price solicitation, issued by the DLA Weapons Support Aviation Supply Chain, is for the procurement of utility grease, identified as a critical application item and a commercial off-the-shelf product. The requirement is for one box containing ten 400-gram cartridges, with an original required delivery date of October 16, 2026. Delivery is set for Tinker AFB, Oklahoma, and must be shipped via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to quality and safety standards, including destination inspection per FAR 52.246-2 and sampling methods aligned with MIL-STD-1916 or ASQ H1331. Because the material is hazardous, the contractor must comply with IP025 for packaging and shipping, and all unit containers must be labeled according to the Hazard Communication Standard 29 CFR 1910.1200. Additional requirements include supply chain traceability documentation, FAA airworthiness approval, and marking compliance with MIL-STD-129. Invoicing must be processed electronically through the Wide Area Workflow system.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

GREASE, MOLYBDENUM DISU

Solicitation # SPE4A6-27-T-6803

Solicitation SPE4A6-27-T-6803 is a request for quotations for the procurement of 73 cartridges of Molybdenum Disulfide grease, identified by NSN 9150-01-722-6334 and Deere & Company part number TY6333. This commercial off-the-shelf item is subject to a non-extendable shelf life of 24 months. The required delivery date is April 10, 2027, with a delivery window of 158 days after order. Delivery is FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is hazardous, the contractor must provide an SDS and OSHA Hazard Warning/Product Label for approval by technical personnel prior to award, and all packaging must comply with the Hazard Communication Standard. Quality assurance will be conducted at the destination using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. This is not a small business set-aside, and all quotes must be submitted via the DLA Internet Bid Board System. Invoicing and receiving must be processed through the Wide Area Workflow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4AN-27-T-0003

Solicitation SPE4AN-27-T-0003 is a request for quotations from the DLA Weapons Support NAS Norfolk Detachment for the procurement of aircraft grease, identified as a Commercial Off The Shelf item under NSN 9150017338256. The requirement consists of 10 cartridges, each containing 13.5 grams. Delivery is required within five days of award, with a required delivery date of October 22, 2026. The shipment is destined for the USS Carl Vinson CVN 70, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to hazardous materials protocols, requiring the submission and approval of Safety Data Sheets and OSHA hazard warning labels by technical personnel prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT NAS NORFOLK DETACHMENT

POSTED

DEADLINE

Synthetic Transmission Fluid

Solicitation # 131-2026

The Southwest Ohio Regional Transit Authority (SORTA), operating as Cincinnati Metro, is soliciting bids under IFB 131-2026 for a one-year contract to supply approximately 4,400 gallons of full synthetic transmission fluid. The required fluid must strictly adhere to Allison TES 668 and Voith specifications, with documented certification required; claims of equivalence or meeting standards without specific approval numbers will not be accepted. SORTA prefers bulk delivery to the Queensgate and Bond Hill garages, with a requirement that orders be fulfilled within 48 hours of a telephone request. Typical ordering volumes are estimated at 300 to 400 gallons per month. The contract will be awarded to the responsible bidder offering the lowest price. Evaluation criteria include the bidder's character, integrity, and technical capability, as well as verification that the entity is not debarred from federal, state, or local programs. Bidders must submit a complete electronic package by November 3, 2026, including a detailed cost breakdown, product data sheets, and various certifications regarding lobbying, taxes, and debarment. The agreement is subject to NET 30 payment terms, and SORTA reserves the right to conduct fluid analysis testing to ensure quality standards are maintained throughout the contract term.

POSTED

DEADLINE

Two (2) Year Contract - Multipurpose Grease

Solicitation # 209

The Jefferson Parish Government is soliciting bids for a two-year, requirements-based contract to provide multipurpose grease for the Jefferson Parish Engineering Department. The contract is structured on an as-needed basis with no guaranteed minimum quantities. The required product is Supertac Food Grade Grease H1, an extreme pressure, anti-wear, high-temperature lubricant that must comply with USDA H1 quality standards and FDA regulations 21CFR 178.3570, 178.3620(b), and 573.680. Technical specifications include strict requirements for worked penetration, dropping point, four ball wear, and viscosity for both NLGI Grade 1 and Grade 2. The contract will be awarded to the lowest responsive and responsible bidder. To be considered responsive, bidders must acknowledge all addenda on the bid form and accept the as-needed terms of the agreement. The apparent low bidder is required to submit final insurance certificates meeting the parish's standard requirements for Worker's Compensation, Commercial General Liability, and Business Automobile Liability within ten calendar days of the bid opening. Bids are due by October 28, 2026, and must be submitted to the Jefferson Parish Department of Purchasing in Gretna, Louisiana.

Jefferson Parish Government

POSTED

DEADLINE

Vehicle Recompete: BPA FOR BULK OIL AND LUBRICANTS IN MICHIGAN — BPA W912JB24Q0114This Blanket Purchase Agreement, managed by the Department of the Army, provides for the procurement of bulk oil and lubricants to support ground equipment maintenance and operations for the Michigan Army National Guard. The vehicle, identified as W912JB24Q0114, has an ordering period that extends through March 5, 2028. Currently, Lyden Oil Co is the sole incumbent, holding all activity under this agreement. The contract consists of two awards, W912JB24A0013 and W912JB24A0014, with 11 active task orders totaling 105,819.85 dollars. Key deliverables include the resupply of petroleum, oil, and lubricants at various locations, including the CSMS in Lansing, Michigan. Specific materials provided under these orders include 15W40 engine oil, Dexron VI automatic transmission fluid, concentrated antifreeze, and various hydraulic fluids. There is a medium confidence level that this contract will be subject to a recompete.

Department of the Army

POSTED

about 2 months ago

DEADLINE

N/A

NAICS: 324191

MARINE GREASE — 9150016517256 — N0010426QFD66

Solicitation # N00104-26-Q-FD66

Solicitation N00104-26-Q-FD66, issued by NAVSUP Weapon Systems Support, is a request for quotations for Marine Grease (NIIN 016517256), specifically Part Number A2283-93 LVP from TRI/Applied Technologies, Inc. Due to its use in crucial shipboard systems, the material is designated as Special Emphasis material (Level I, Scope of Certification, or Quality Assured), requiring strict adherence to toxicity and flammability requirements per NAVSEA SS800-AG-MAN-010/P-9290. The material must be mercury-free, physically identified according to MIL-STD-130, and marked with an expiration date. Although the solicitation was issued on April 29, 2026, with a quote deadline of May 14, 2026, a subsequent amendment dated August 27, 2026, officially canceled the solicitation. The procurement process emphasizes past performance as the primary evaluation factor, weighted more heavily than price. Technical requirements include strict configuration control, with any waivers or engineering change proposals requiring approval from the Contracting Officer. Packaging must comply with MIL-STD-2073 and ASTM D3951-18 depending on the shipment destination. Administrative requirements specify the use of the Wide Area Workflow (WAWF) system for invoicing and certification data submission to the Portsmouth Naval Shipyard. Delivery is set as FOB Destination with a final delivery window of 200 days, and constructive acceptance is extended to 45 days after delivery.

Navsup Weapon Systems Support Mech

POSTED

2 months ago

DEADLINE

N/A

AI Contract Overview

SECO Energy is soliciting proposals for the provision of mineral insulating oil for substation power transformers in Florida. The vendor is responsible for furnishing all required oil, which must strictly conform to ASTM D3487 and ANSI C57.106 standards. A critical requirement is that the oil must be free of polychlorinated biphenyls (PCB), and the vendor must provide certified test results and documentation proving compliance with the most stringent EPA or State non-PCB requirements upon delivery. For site filling, the manufacturer is required to perform the filling process using their own personnel and equipment. All bids and inquiries must be submitted exclusively through VendorLink by the deadline of June 12, 2024, with the proposal uploaded as a Proposal file type. Phone calls and emails regarding this solicitation will not be accepted.

General Info

SECO Energy seeks non-PCB mineral insulating oil and filling services by June 12, 2024.

Agency

Florida → SECO Energy

NAICS

324191 - Petroleum Lubricating Oil and Grease Manufacturing

Place of Performance

FL, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 5

Solicitation

Response DeadlineJun 12

Deadline has passed

Submission Closed

06/12/2024, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida → SECO Energy

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida → SECO Energy

Office AddressN/A

ContactsNo contact information available

Full Description

SUBSTATION POWER TRANSFORMER MINERAL INSULATING OIL SPECIFICATIONS. PER ATTACHED SPECIFICATIONS 1.1 MINERAL INSULATING OIL USED IN TRANSFORMERS 1.1.1 General: The Vendor shall furnish all required insulating oil. The insulating oil furnished shall conform to ASTM D3487 and ANSI C57.106. Mineral insulating liquid containing polychlorinated biphenyls (PCB) is not acceptable. 1.1.2 Sampling and Testing: Certified results of tests which demonstrate compliance with ASTM D 3487 and these specifications shall be furnished. Copies of certified reports of the tests shall be furnished. 1.1.3 Delivery: The oil shall be delivered in accordance with solicitation requirements. For site filling, the manufacturer shall fill the transformer using their personnel and equipment. The Contractor shall also furnish certification that the oil meets the EPA requirements or the State requirement (whichever is more stringent) for non-PCB when the oil is delivered. The oil truck driver shall have in his possession and furnish this certification.***QUOTE SUBMITTAL INSTRUCTIONS***All questions and proposals must be submitted on VendorLink. PLEASE NO PHONE CALLS OR EMAILS.The following requirements must be met, in order to submit your bid on VendorLink:Must upload your proposal, choosing `Proposal` as your file type