Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supplier of Blind Rivets (NAS1921B04S03)

Active

Federal

Response Deadline10/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 2,014 blind rivets, identified by NSN 5320010991001, for prime contractors supporting DLA supply contracts. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to NAS1921B04S03 and NAS1900 standards, with delivery terms set as FOB Origin. The contractor must ensure all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider is required to furnish quality assurance documentation for critical application hardware and provide Material Safety Data Sheets in accordance with DFARS 252.223-7001. This requirement is managed by the Department of Defense under the ASC Commodities Division.

General Info

Supply 2,014 blind rivets meeting NAS standards for DLA via FOB Origin delivery.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333515 - Cutting Tool and Machine Tool Accessory ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-U-4356.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIVET, BLIND

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineOct 2

Submission deadline

Response Deadline

10/02/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies blind rivets for prime contractors on DLA supply contracts. Manufactures or sources rivets adhering to NAS1921B04S03 and NAS1900 standards. Performs packaging and marking per MIL-STD-2073-1E and MIL-STD-129. Provides quality assurance documentation for critical application hardware and MSDS per DFARS 252.223-7001. Delivers 2,014 blind rivets (NSN 5320010991001) FOB Origin.

Similar Contracts

Same NAICS industry code

STAND, MAINTENANCE, GUID

Solicitation # SPE4A7-26-T-733K

Solicitation SPE4A7-26-T-733K is a fixed-price request for quotations issued by DLA Aviation for the procurement of four maintenance stands for guided missile components, identified by NSN 4935-01-294-9843. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and requires SBA certification for eligibility. The delivery period is 170 days after the award, with a need ship date of March 8, 2027, and a final required delivery date of July 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination in New Cumberland, Pennsylvania. The contract imposes strict technical and regulatory requirements, including compliance with ITAR and EAR export controls for technical data and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance is managed through a zero-nonconformance sampling plan based on MIL-STD-1916 or ASQ H1331. Additionally, the procurement mandates compliance with the Buy American Act and the Berry Amendment, prohibits the use of mercury in packaging, and requires the use of the Wide Area WorkFlow (WAWF) system for all electronic invoicing and receiving reports.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

CUTTER BIT,TOOL HOL — 3455014653587 — N0010426QEF63

Solicitation # N0010426QEF63

This solicitation, issued by NAVSUP Weapon Systems Support MECH, is for the procurement of 66 units of Cutter Bits (NSN 1HM 3455-01-465-3587) under solicitation number N0010426QEF63. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with a 10 percent price evaluation preference applied to HUBZone small business concerns. The delivery timeframe is 180 days, with terms set as FOB Destination. Inspection and acceptance will occur at the origin, and the contractor must maintain a government-acceptable inspection system, including adherence to a specific hold point for tool inspection prior to final grinding and cleaning. Technical requirements are governed by TDP version 010 and the Individual Repair Part Ordering Data (IRPOD), with a strict order of precedence that prioritizes contract amendments and the schedule of supplies. Contractors must comply with higher-level quality standard MIL-I-45208 and adhere to strict packaging standards, including MIL-STD-2073-1 for overseas shipments and MIL-STD-129 for marking. Key deliverables include a procedure package due within 45 days of award and a certified reports of test and inspection package due at the end of the contract. Additionally, the contract mandates compliance with Naval Nuclear Propulsion Information safeguards and prohibits the intentional addition of mercury to hardware.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Supply of Pillow Block Ball Bearing UnitsThis subcontract involves the supply of 10 pillow block ball bearing units for the Department of Defense ASC Commodities Division. The required parts must be sourced or manufactured according to NSN 3130004987971 and meet all associated technical specifications. The completed shipment is to be delivered to DLA Distribution Cherry Point, North Carolina, under FOB Origin terms. The solicitation was posted on September 17, 2026, with a response deadline of September 25, 2026, falling under NAICS code 333515.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Annular Ball Bearings (NSN 3110010925566)This subcontract involves the supply of 22 high-precision annular ball bearings for prime contractors under a Department of Defense contract managed by the ASC Commodities Division. The provider is responsible for manufacturing or sourcing the bearings to meet the exact technical specifications of NSN 3110010925566 and must strictly adhere to all quality assurance verification requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333515, with performance located in New Cumberland. Interested parties must respond by September 25, 2026, to fulfill the requirements of this DLA supply contract.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Machine Bolts (NSN 5306-00-913-3480)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing of Spur Gears (NSN 3020-00-457-7029)This subcontract involves the manufacture and supply of four precision spur gears for prime contractors under DLA Land and Maritime supply contracts. The work requires precision machining and cutting according to the NSN 3020-00-457-7029 technical data package, utilizing CNC gear hobbing and grinding equipment. All deliverables must strictly adhere to MIL-STD-129 marking and RP001 packaging requirements. The project is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, with performance taking place at Hill AFB. The contract falls under NAICS code 333515 and was posted on September 17, 2026, with a response deadline of September 28, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Spur Gears (NSN 3020-01-321-8414)This subcontract involves the supply of 12 precision-manufactured spur gears meeting NSN 3020-01-321-8414 specifications for the Department of Defense, specifically under the LSO Combat Vehicles and Armament agency. The components must be produced using precision machining or additive manufacturing in accordance with L31 standards. All items must be packaged and labeled according to ASTM D3951, MIL-STD-129, and RP001 requirements. The place of performance is located in Tracy, California, with a response deadline of September 28, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Gear Box Precision Component ManufacturingThis subcontract opportunity with the Department of Defense ASC Supplier OEM Division involves the manufacture of high-precision gears, shafts, and housing components for DLA Aviation gear box parts kit projects. The contractor will perform precision machining and fabrication of internals for NSN 1560007038416 utilizing CNC milling, turning, and gear grinding machinery. All work must adhere to AS9100 and Critical Application Item quality standards to ensure the delivery of finished precision-machined components. The project is designated as a Total Small Business Set-Aside under NAICS code 333515, with performance taking place at Tinker AFB. Interested parties must respond by September 25, 2026.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Spur Gear Manufacturing and SupplyThis subcontract involves the precision manufacture and supply of two spur gear units for prime contractors supporting DLA Land and Maritime supply contracts. The fabrication must strictly adhere to technical specifications for NSN 3020-01-711-0093, utilizing specialized machining equipment for gear cutting and grinding. The project is managed under the Department of Defense agency Land Supplier Opns Engines with a NAICS code of 333515. Key compliance requirements include maintaining supply chain traceability per section C03 and adhering to Buy American standards as defined in DFARS 252.225-7000. The response deadline for this opportunity is September 24, 2026.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Tooling for Piston Casting

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supplier of Matched Bevel Gear Sets (NSN 3020016778826)This subcontract opportunity with the Department of Defense, specifically the Land Supplier Opns Vehicle Spt, seeks a provider to supply 67 matched bevel gear sets for aircraft fuselage parts kits. The supplier must manufacture or source gear sets that strictly adhere to NSN 3020016778826 specifications, with a critical requirement that matched sets remain together to ensure precision fit. All deliverables must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, while maintaining DFARS 252.204-7012 compliance. The contract is designated as a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS code 333515. Performance will take place at Tinker AFB, Oklahoma. Interested parties must submit their responses by September 28, 2026, following the posting date of September 17, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

INDICATOR, DIAL

Solicitation # SPE8E5-26-T-4404

Solicitation SPE8E5-26-T-4404 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support for the procurement of one dial indicator, identified by NSN 5210-01-112-5144. The requirement is managed under NAICS 333515, with a required delivery date of September 15, 2026, and a delivery lead time of 20 days after order. Shipping is specified as FOB Origin, with the final destination located in East Granby, Connecticut. The contractor is instructed to use the fastest traceable means for shipment and is explicitly prohibited from using parcel post. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and RP001 for palletization, while ASTM D3951 serves as the general packaging standard unless superseded by the DLA Master List of Technical and Quality Requirements. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the offeror must comply with the Buy American Act, the Berry Amendment, and cybersecurity regulations regarding the safeguarding of covered defense information. All quotes must be submitted electronically via the DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Manufacturing and Supply of Tabbed Regulator Support Key WashersThis subcontract involves the manufacturing and supply of 194 tabbed regulator support key washers for prime contractors under DLA Aviation supply contracts. The components must be produced according to NSN 5310-005-901786 using precision machining or stamping equipment. All work is overseen by the Department of Defense ASC Commodities Division and will be performed at Tinker AFB. The contractor is responsible for all testing, packaging, and labeling in strict accordance with the DLA Master List of Technical and Quality Requirements and hazard communication standards under 29 CFR 1910.1200. The project falls under NAICS code 332722, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Electrical Component Supply (Connectors, Terminals, and Wire)This subcontract with the Department of Defense ASC Commodities Division focuses on the supply of raw materials and specialized electrical components for prime contractors. The scope includes sourcing and delivering aerospace-grade wires, terminals, and Mil-Spec connectors as specified in TDP Rev D Gen 4. Performance will take place at Hill AFB, with the supplier responsible for providing certifications of conformance and managing cure-date documentation for all delivered parts. The contract requires strict adherence to prohibitions on covered telecommunications equipment and falls under NAICS code 423610. Interested parties must respond by September 23, 2026, to provide bulk electrical components and raw wiring materials in accordance with the established technical requirements.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Wiring Harness Manufacturing and AssemblyThis subcontract with the Department of Defense ASC Commodities Division involves the fabrication and assembly of specialized branch wiring harnesses for prime contractors. The manufacturing process must adhere to TDP Rev D Gen 4 and specific reference drawings, including FMS-1049 Rev E, M016 Rev AB, C7551 Rev AM, and FQML-P5071-8 Rev 8, utilizing assembly jigs, crimping, and soldering equipment. The scope of work includes performing First Article Testing in accordance with government requirements and delivering completed, tested, and packaged wiring harnesses. Performance of these services is located at Hill AFB, and the project falls under NAICS code 335931.

Current-Carrying Wiring Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Power Cable Assemblies (NSN 6150-01-560-2064)This subcontract, issued by the Department of Defense ASC Commodities Division, seeks a provider for specialized electrical power cable assemblies identified by NSN 6150-01-560-2064. The project is designated as a Total Small Business Set-Aside under NAICS code 335999, with a response deadline of October 5, 2026. The selected provider must supply physical power cable assemblies for prime contractors on stock buy projects while maintaining a valid CAGE code for shipping and acceptance. Strict adherence to the Buy American and Balance of Payments Program certifications is required to ensure all end products originate from domestic or qualifying countries.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-STD-129 and MIL-STD-2073-1E Packaging ServicesThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the Department of Defense ASC Commodities Division. The scope of work focuses on the delivery of marked and packaged meters, requiring strict adherence to MIL-STD-129 for marking, including the specific code -05 for delicate instruments. Packaging operations must be executed according to MIL-STD-2073-1E, utilizing Packaging Data QUP:001, Pres Mthd:10, and Clng/Dry:1. The contractor is responsible for using specialized preservation and wrapping materials tailored for delicate instrumentation. Performance of these services will take place in Tracy, California.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Supply of Flow Rate Indicating Meters (P/N 7058-G501)This subcontract involves the procurement of 21 flow rate indicating meters for prime contractors supporting Department of Defense projects under the ASC Commodities Division. The required items must match part number 7058-G501 from Howell Laboratories Inc and adhere to NSN 6680014589470 specifications. All deliverables must comply with Critical Application Item quality standards and FAR 52.223-3 regulations regarding hazardous material identification. The contract is categorized under NAICS code 334519 and specifies delivery of the units FOB Origin. Performance of the contract is centered in Tracy, California. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

Machine Screw Supply (NSN 5305017215467)This subcontract with the ASC Commodities Division of the Department of Defense involves the procurement of 29,000 machine screws under NSN 5305017215467. The supplier is responsible for manufacturing or sourcing the screws to ensure they are mercury-free and packaged according to DLA military technical standards. Quality assurance must be maintained through sampling and inspection processes adhering to MIL-STD-1916 or ASQ H1331. The deliverables are to be shipped FOB Origin to New Cumberland, Pennsylvania. This requirement falls under NAICS code 332722 and is intended for prime contractors supporting DLA Aviation supply contracts. The response deadline for this opportunity is September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Self-Locking Nut AssembliesThis subcontract with the Department of Defense ASC Commodities Division involves the manufacture and supply of 119 self-locking nut assemblies designed for gang channels, specifically meeting NSN 5310-00-372-8312. The contractor is responsible for sourcing the components and ensuring all quality assurance and packaging adhere to the specified statement of work standards. Performance will take place at Robins Air Force Base, and the contractor must maintain compliance with NIST SP 800-171 for the secure handling of covered defense information. The opportunity was posted on September 18, 2026, with a response deadline of September 23, 2026, under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Flat Washers (NAS1149G0832P)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 1,027 specialized flat washers, part number NAS1149G0832P. The contractor is responsible for manufacturing or sourcing these components in strict compliance with National Aerospace Standard specifications and providing all necessary quality assurance documentation required for DLA Aviation hardware. The performance for this contract is located at Hill AFB, zip code 84056-5734, under NAICS code 332722. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Tapered Roller Cups (NSN 3110-01-653-7449)This subcontract involves the procurement of nine tapered roller cups meeting the technical specifications of NSN 3110-01-653-7449 for the Department of Defense ASC Commodities Division. The supplier is responsible for providing these units to prime contractors while adhering to standard commercial packaging and shipping requirements. The contract falls under NAICS code 333311 and specifies a place of performance in New Cumberland, Pennsylvania. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Automatic Vending Machine Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Eye Bolts (MS27950-6)This subcontract with the ASC Commodities Division of the Department of Defense requires the manufacture or sourcing of 64 specialized eye bolts, identified by NSN 5306009330595. The components must strictly adhere to technical specification MS27950-6 and reference standard FF-T-791B(1), with a specific emphasis on precision machining to achieve the required oval eye physical geometry. The contract falls under NAICS code 332722 and mandates full compliance with FAR 52.223-3 regarding the handling and reporting of hazardous materials. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for September 25, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305014142861)This subcontract involves the manufacture and supply of 44 units of socket head cap screws, identified by NSN 5305014142861, for prime contractors supporting DLA Aviation supply contracts. The items must meet MIL-DT-1222J mechanical properties and markings, with strict adherence to MIL-STD-129 and IP056 compliance. Packaging and sampling requirements are governed by RP001, MIL-STD-2073-1E, MIL-STD-1916, or ASQ H1331. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 325311. Delivery is set as FOB Origin to DLA Distribution San Joaquin, located in Tracy, California. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Nitrogenous Fertilizer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS