Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supplier of Fixed Electrolytic Capacitors (NSN 5910-00-203-5777)

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 63 fixed electrolytic capacitors to prime contractors supporting the DLA Weapons Support Active Devices Division. The hardware must strictly adhere to NSN 5910-00-203-5777 and Cornell-Dubilier specifications, ensuring zero mercury content and lead finish markings that comply with IPC/JEDEC J-STD-609. The agreement requires full compliance with the Buy American Act, the Berry Amendment, and the DLA Master List of Technical and Quality Requirements. Delivery of the components is designated as FOB Origin, with the place of performance located in New Cumberland, Pennsylvania.

General Info

Supply 63 mercury-free electrolytic capacitors per NSN specifications for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

332919 - Other Metal Valve and Pipe Fitting Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-27-T-1673.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAPACITOR, FIXED, ELECTR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies fixed electrolytic capacitors for prime contractors on DLA Weapons Support Active Devices Division projects. Provides hardware matching NSN 5910-00-203-5777 and Cornell-Dubilier specifications. Ensures lead finish markings per IPC/JEDEC J-STD-609 and zero mercury content. Complies with Buy American Act, Berry Amendment, and DLA Master List of Technical and Quality Requirements. Delivers 63 capacitors FOB Origin.

Similar Contracts

Same NAICS industry code

COUPLING HALF, QUICK

Solicitation # SPE7M3-27-T-0769

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

VALVE STEM, TTV

Solicitation # N0010424QBM87

This solicitation, number N00104-24-Q-BM87, is issued by the Navsup Weapon Systems Support Mech office in Mechanicsburg, PA, for the procurement of one Valve Stem, TTV (NIIN: 016320195). The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations based on technical compliance, price, and risk assessments from the Supplier Performance Risk System. The procurement is a DO rated order for national defense and emergency preparedness, and it requires adherence to the Buy American and Balance of Payments Program. The contractor must comply with strict technical and quality standards, including the Individual Repair Part Ordering Data (IRPOD) and higher-level quality requirements under MIL-I-45208. Packaging must follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and unique item identification per MIL-STD-130. Inspection and acceptance will occur at the origin. Payment and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system. The response deadline for quotes is November 30, 2026, and submissions are accepted via email or NECO.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

47--CONNECTION,FLEXIBLE

Solicitation # N0010426QYAGN

Solicitation NO0014-26-Q-YAGN is a fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of flexible connections, specifically NSN 4730-01-144-5975. The required items must adhere to the design represented by Cage Code 18444, reference number 299941-100, and must be entirely mercury-free for use on submarines and surface ships. The government retains an option to order an additional quantity of up to 100 percent of the original order for 365 days after receipt. The closing date for this solicitation has been amended to October 19, 2026. The contract mandates strict quality and technical standards, including physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073. All deliveries are FOB Destination with a delivery window of 180 days. Offerors who are not the Original Equipment Manufacturer must provide the OEM's company name, CAGE code, and a signed letter of authorization. Evaluation will be conducted using the Supplier Performance Risk System to assess item, price, and supplier risk, alongside Buy American and Balance of Payments Program policies. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 2 months

PARTS KIT,BALL VALV

Solicitation # N0010426QNE98

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of 175 ball valve parts kits (NSN 4820-01-425-4163). The material is designated as Special Emphasis Level I, meaning it is used in crucial shipboard systems where failure could result in serious personnel injury, loss of life, or loss of the vessel. Consequently, the contract mandates strict quality assurance, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The kits consist of a ball made from SAE-AMS-6931 and seats made from MD71-GG Mearthane, both requiring rigorous quantitative chemical and mechanical analysis. Key technical requirements include hydrostatic testing for each ball at 1875 PSI for 30 minutes, with dye penetrant inspection as an acceptable substitute for manufacturers lacking test fixtures. All welding and brazing must adhere to specific S9074 and 0900-LP standards, requiring prior approval of qualification data. The contractor must submit a Certificate of Compliance and all objective quality evidence via the Wide Area Workflow (WAWF) system to Portsmouth Naval Shipyard for review and acceptance before shipping. Final inspection follows a zero-defect acceptance policy, with sampling based on ANSI/ASQ-Z1.4. The government intends to make a single fixed-price award based on the most advantageous offer, prioritizing past performance over price. Packaging must comply with MIL-STD-2073-1, and all shipments must be prepaid to the destination. Offerors must provide a Quality Assurance Manual to be eligible for award and must certify that the materials are mercury-free. All configuration changes or deviations require formal review and approval by the Contracting Officer through Engineering Change Proposals or waiver requests.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

DELTA-P IND ASSY

Solicitation # SPRMM127QKA47

Solicitation SPRMM1-27-Q-KA47 is issued by the Defense Logistics Agency Weapons Support Mechanicsburg for the manufacture and delivery of one DELTA-P IND ASSY, identified by NIIN 016642911. The item must be produced according to the design represented by Cage Code 99517, reference number 12052305-005. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations based on LPTA criteria and risk assessments from the Supplier Performance Risk System. The procurement is categorized under NAICS code 332919 with a small business size standard of 750 employees. Key technical requirements include strict adherence to MIL-STD-130 for physical identification and a mandatory mercury-free certification for use on submarines and surface ships. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific DLR labeling requirements for shipping containers. Inspection and acceptance will occur at the contractor's or subcontractor's plant. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Offerors must provide CMMC Level 1 self-certification and identify the Original Equipment Manufacturer and CAGE code if they are not the manufacturer. Delivery is destined for the Pearl Harbor Naval Shipyard IMF.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

STEM,FLUID VALVE

Solicitation # N0010426QZB64

Solicitation N00104-26-Q-ZB64 is a fixed-price request for quotations from NAVSUP Weapon Systems Support for the manufacture of a Fluid Valve Stem (NSN 4820-01-496-3210). This item is designated as a Critical Safety Item and Special Emphasis Material Level I, as its failure could result in catastrophic loss of life or the ship. The government will provide the necessary barstock (NIIN 014959538X2) as Government Furnished Material, and the contractor must maintain strict heat traceability throughout production. The stem must be manufactured in accordance with NAVSEA drawing 803-5959307 and related specifications, using ASTM-B348 Grade 23 or SAE-AMS-4931 material. Weld repairs on titanium parts are strictly prohibited. The contract mandates rigorous quality assurance and certification standards, requiring a quality system compliant with ISO-9001 and specific calibration standards such as ISO-10012 or ANSI-Z540.3. Key requirements include dye penetrant inspection, a zero-defect lot acceptance policy, and the submission of a comprehensive Certificate of Compliance and test results via the Wide Area Workflow system prior to shipment. All deliverables must be preserved and marked according to MIL-STD-2073 and MIL-STD-129. Award will be made to the most advantageous offeror, with past performance weighted as more important than price.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

48--ACTUATOR,HYDRAULIC-, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QZA04

This fixed-price contract, solicitation number N00104-27-Q-ZA04, is issued by the Navsup Weapon Systems Support Mech for the manufacture or refurbishment of hydraulic actuators. The scope of work requires the contractor to inspect, clean, and refurbish the items in accordance with Drawing 30093-40940 and MS NO. 5640-081-346 REV A CHG-4. Final delivery of the material must be completed within 86 days of the contract's effective date, with the ship-to destination located in Kittery, Maine. The award is designated as a DO rated order under the Defense Priorities and Allocations System, signifying its importance for national defense. Key requirements include physical identification per MIL-STD-130 and strict adherence to preservation, packaging, and marking standards such as MIL-STD-2073-1 and MIL-STD-129. If additive manufacturing is utilized, the contractor must provide comprehensive traceability data via DD1423 reporting. The contract includes a one-year warranty for supplies of a noncomplex nature and mandates the use of the Wide Area Workflow (WAWF) system for electronic invoicing and receiving reports. Evaluation for award is based on the Supplier Performance Risk System, assessing item, price, and supplier risk. All transportation to and from the repair site is paid for by the US Navy.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QNE90

This solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, is for the procurement of a Valve Stem (NSN 1HM 4820-01-548-5698) to be delivered within 120 days. The item is designated as Special Emphasis material (Level I, Scope of Certification) because it is used in crucial shipboard systems where failure could result in catastrophic loss of life or vessel. Due to this criticality, the contract mandates strict quality controls, including a requirement for the contractor to maintain an ISO-9001 quality system and undergo Government Quality Assurance at source via the Defense Contract Management Agency. Technical requirements specify the use of ASTM-B150 Alloy C63200, mandatory oxygen cleaning per MIL-STD-1330, and a strict mercury-free composition. The award will be made to the offeror determined to be most advantageous to the Government, with past performance weighted as more important than price. Key deliverables include the hardware and comprehensive test certifications submitted via Wide Area Workflow (WAWF) to the Portsmouth Naval Shipyard for review and acceptance prior to shipment. Packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards, with specific red labeling for Level 1 materials. The procurement is DO certified for national defense under the Defense Priorities and Allocations System and is conducted as a simplified acquisition.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

VALVE, CARTRIDGE

Solicitation # N0010427QFA13

This contract, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a solicitation for the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) in accordance with drawing 237914-0002. The award will be made to a single offeror based on a trade-off where past performance is considered more important than price. The contract is designated as a DO-rated order for national defense use and is issued under Emergency Acquisition Flexibilities. Final delivery of the material is required within 365 days of the contract's effective date, with FOB Destination terms. Key technical requirements include strict adherence to MIL-STD-130 for marking, MIL-STD-2073 for packaging, and MIL-STD-1330 for oxygen cleaning. The contractor must provide a one-year warranty from the date of delivery and submit certification data CDRLs at least 20 days prior to scheduled delivery. If additive manufacturing is utilized, a Master Component Traceability Ledger must be maintained and submitted. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting, and compliance with Buy American and Balance of Payments program certifications. Inspection and acceptance will occur at the origin.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

VALVE,REGULATING,FL

Solicitation # SPRMM127QKA27

This fixed-price solicitation, issued by DLA Mechanicsburg under solicitation number SPRMM127QKA27, requires the manufacture and delivery of two regulating valves (VALVE,REGULATING,FL) based on the design represented by Cage Code 99643, reference number 84140-1. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with a 10 percent price evaluation preference applied to HUBZone small business concerns. Offerors must be authorized distributors of the original manufacturer and are prohibited from providing refurbished material. Technical drawings are not available for this item, and the contractor is responsible for ensuring the product meets all quality requirements, including physical identification per MIL-STD-130 and packaging according to MIL-STD-2073-1. The contract mandates the use of PIEE-WAWF for the electronic submission of invoices and receiving reports, and any requests for modifications must be processed through the Workflow Pro (WFP) Mod Assist module. Inspection and acceptance will occur at the origin. Key compliance requirements include CMMC Level 1 self-certification, adherence to the Buy American Act, and strict prohibitions relating to Chinese military companies. Contractors must maintain inspection records for 365 days following final delivery and are required to provide the Original Equipment Manufacturer's CAGE code and part number when submitting quotes.

SPRMM1 DLA Mechanicsburg

POSTED

about 7 hours ago

DEADLINE

in about 1 month

NOZZLE,VALVE — 4820017141239 — SPRPA127QXA57

Solicitation # SPRPA127QXA57

Solicitation SPRPA127QXA57, issued by DLA Aviation at Philadelphia for the Department of the Navy, seeks a single award for the supply of nine valve nozzles (NSN 4820-01-714-1239). This procurement is designated as a Critical Safety Item (CSI) and requires the contractor to maintain an ISO9001 quality management system. Delivery is required within 90 days to DLA Distribution Cherry Point, North Carolina, with FOB Destination terms. Inspection and acceptance will occur at the origin. The award will be based on the most advantageous offer, with past performance weighted as more important than price. The government will utilize the Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Strict packaging and marking standards are mandated, including compliance with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for DLR labels and electrostatic discharge protection where applicable. Payment will be processed electronically via Wide Area WorkFlow (WAWF). The solicitation incorporates various FAR and DFARS clauses, including the Buy American program and cybersecurity requirements under DFARS 252.204-7012.

Pa DLA Aviation At Philadelphia

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

Supply of Fluid Filter Elements (NSN 5999-01-742-0549)This subcontract involves the supply of a specific fluid filter element, identified by NSN 5999-01-742-0549, for prime contractors supporting DLA and Navy supply contracts. The equipment is designated for the USS JOHN FINN DDG 113, with the delivery of one unit to the vessel destination. The contract is managed under the Department of Defense through the DLA Weapons Support Active Devices Division. The provider must adhere to strict military standards for packaging and marking, specifically MIL-STD-2073-1E, RP001, and MIL-STD-129. Additionally, the contractor is responsible for ensuring all hazardous materials are accompanied by Hazard Warning Labels and Material Safety Data Sheets in compliance with 29 CFR 1910.1200. The opportunity is categorized under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 2 hours ago

DEADLINE

Fixed Attenuator Component Supplier

Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Electrical Connector Covers (NSN 5935011286144)

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

ATTENUATOR, FIXED

Solicitation # SPE7M5-27-U-0056

Solicitation SPE7M5-27-U-0056 is an Indefinite Delivery Contract (IDC) issued by the DLA Weapons Support Active Devices Division for the procurement of fixed attenuators (NSN 5985-01-725-6782). This is a total small business set-aside with a contract maximum value of 350,000.00 USD. The requirement specifies an estimated annual quantity of 36 units, with a guaranteed contract minimum of 5 units and a minimum delivery order quantity of 9 units. Delivery is required within 105 days after the order, with FOB and acceptance points set at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, including packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and telecommunications restrictions. Evaluation requires a 90-day quote validity period, and alternate offerors must provide a complete data package for approved and alternate parts. Invoicing and payment are processed electronically through the Wide Area WorkFlow (WAWF) system. Quotations are due by November 13, 2026, to the point of contact, Desmond Forshey.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

TRANSFORMER, POWER AUTO

Solicitation # SPE7M5-27-T-1714

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

COVER, ELECTRICAL CONNE

Solicitation # SPE7M5-27-T-1706

Solicitation SPE7M5-27-T-1706 is a small business set-aside issued by the DLA Weapons Support Active Devices Division for the procurement of 82 electrical connector covers, identified by NSN 5935011286144. The requirement is for a critical application item and specifies a delivery timeframe of 36 days after award, with a need ship date of December 16, 2026, and a final required delivery date of February 4, 2027. Shipping is designated as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution Jacksonville in Florida. The contract mandates strict adherence to quality and technical standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001 requirements. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. Key regulatory clauses include the Buy American Act, NIST SP 800-171 cybersecurity assessments, and the prohibition of additive manufacturing unless specifically authorized. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Plate Work Manufacturing

POSTED

about 2 hours ago

DEADLINE

TRANSFORMER ASSEMBLY

Solicitation # SPE7M5-27-T-1708

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M5-27-T-1712

Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7M5-27-T-1710

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M5-27-T-1711

Solicitation SPE7M5-27-T-1711 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of one handset, identified by NSN 5965017429038 and Dynalec Corporation part number 65033-042-13. The contract is a fixed-price acquisition with a required delivery date of October 23, 2026. Delivery is specified as FOB Destination to the USS Mitscher DDG 57 at FPO AE 09578, and shipments must be made via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict material and environmental standards, including the prohibition of class I ozone depleting chemicals and the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Security and compliance mandates include CMMC Level 2 certification, DFARS 252.204-7012 for safeguarding covered defense information, and adherence to the Buy American Act and Berry Amendment. Invoicing and payment processing are to be managed through the Wide Area WorkFlow system.

POSTED

about 2 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M5-27-T-1707

Solicitation SPE7M5-27-T-1707 is a Request for Quotations issued by the DLA Weapons Support Active Devices Division for the procurement of one fluid filter element, identified by NSN 5999-01-742-0549. The item must be delivered to the USS JOHN FINN DDG 113 with an original required delivery date of October 1, 2026, and a delivery window of 20 days after order. The contract specifies FOB Origin and requires destination inspection and acceptance. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, specifically referencing basic drawing 53711 7402729 Revision D. Packaging and marking must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with specific preservation method 31. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various federal regulations, including price evaluation preferences for HUBZone small businesses, Buy American Act compliance, and strict prohibitions on the use of covered defense telecommunications equipment. Additionally, the contractor must adhere to DFARS requirements regarding safeguarding covered defense information and the labeling of hazardous materials.

POSTED

about 2 hours ago

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M5-27-T-1709

Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Fire Extinguisher Valve Fabrication (NSN 4210-00-825-1183)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

PARTS KIT, FLUSH VALVE

Solicitation # SPE8E8-27-T-0331

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

FITTING ASSEMBLY, FL

Solicitation # SPE4AX26F9907

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-183E

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0342

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

ELBOW, TUBE TO HOSE

Solicitation # SPE7M3-26-T-5376

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-2872

Defense Logistics Agency

POSTED

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8E9-27-T-0332

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

ELBOW, TUBE TO BOSS

Solicitation # SPE7L127FA19M

Defense Logistics Agency

POSTED

DEADLINE

SPRAY NOZZLE ASSY

Solicitation # SPE3SE-27-Q-0063

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1305

Defense Logistics Agency

POSTED

DEADLINE

COVER, CYL VALVE

Solicitation # SPE7LX27FA84W

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS