Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supplier of Specialty Materials (Non-Asbestos Alternatives)

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of alternative, non-asbestos materials specifically intended for use in retainers and seals, with delivery and compliance contingent upon formal approval under Clause L30 and Provision 4. These materials must meet stringent technical and safety standards to replace asbestos-based components, ensuring operational integrity while adhering to environmental and health regulations. The subcontract is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is managed by the Department of Defense through its LAND SUPPLY CHAIN agency, with performance required at McConnell AFB, Kansas, zip code 67221-3710. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, indicating a limited window for qualified suppliers to submit proposals that demonstrate technical capability, material compliance, and readiness to meet approval criteria. All submissions must align with the defined specifications and approval pathways outlined in the contract terms to be considered for award.

General Info

Supply of non-asbestos retainer/seal materials for DoD at McConnell AFB, compliant with Clause L30 and Provision 4.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

MCCONNELL AFB, KS, 67221-3710, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of alternative, non-asbestos materials for use in the retainer and seal, subject to formal approval under Clause L30 and Provision 4.

Similar Contracts

Same NAICS industry code

SPILL CONTAINMENT UNIT

Solicitation # SPE4A7-26-T-617C

The contract calls for the procurement of 16 Spill Containment Units, each comprising a collapsible containment system measuring 40 x 14 x 1 feet, designed without inflation requirements, paired with a 15 x 41 foot vinyl ground tarp and two heavy-duty PVC-coated polyester core track belts measuring 40 feet by 36 inches. The units must be constructed of XR-5 or an equivalent material and are engineered to be drivable over, with full assembly including all components delivered as a single unit. The item is identified by NSN 4235-01-419-4801 under a Women-Owned Small Business Set-Aside, with delivery required within 211 days of award. The solicitation number is SPE4A7-26-T-617C, issued on August 4, 2026, with responses due by August 12, 2026, and performance is to be delivered to Tracy, California, 95304-5000. Vendors must provide commercial catalog documentation verifying conformance to Commercial Item Description A-A-60018A and demonstrate capability for successful prior performance. All units must meet DLA Packaging Requirements and be marked in accordance with physical identification standards. The contract incorporates the DLA Master List of Technical and Quality Requirements, including cybersecurity maturity compliance at CMMC Level 2, configuration change management protocols, and inspection and acceptance at origin. Any deviations require formal variance requests. The contracting office is part of the Department of Defense, managed by the ASC Supplier Oper AE and AF Division, with primary point of contact Lauren Montgomery.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

LUBRICATOR, AIRLINE

Solicitation # SPE8EE-26-T-2211

The contract is for the procurement of one Lufticator, Airline, identified by NSN 4930-01-284-6948 and part number P8B-860-M3DA, with a required delivery within 20 days of contract award. The item must be delivered FOB destination with no variance in quantity allowed and is subject to inspection and acceptance at the destination point. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization governed by DLA’s Packaging Requirements for Procurement, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM standards. The shipment must not be sent via parcel post and must use the fastest traceable means, addressed to USS NEW YORK LPD 21 at FPO AA 34092 with RDD 777 and project code ZH9 TP 2. The sole unit of issue is each, with a total price of $1.00. The solicitation number is SPE8EE-26-T-2211, with a response deadline of August 17, 2026, and the contract is issued under the DoD with NAICS code 325998. Covered defense information applies, and government identification must be removed from non-accepted supplies. All vendor actions must reference the VSM system and the designated point of contact, Philip Ferrara, at DLA.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 19 hours ago

DEADLINE

FLUX, SOLDERING

Solicitation # SPE8E6-26-T-3976

This contract specifies the procurement of Silver Solder, RMA, Paste, identified by NSN 3439-01-373-7966 and part number ASTM B32, with a unit of issue of BT and a quantity of two 8-ounce units. The product must comply with ASTM B32 revision dated May 1, 2008, and adhere to strict packaging, marking, and shipping requirements including MIL-STD-2073-1E, MIL-STD-129, and ASTM-D3951-15, with all containers labeled using commercial packaging methods and marked with shelf-life information per special marking code 33. The material must have at least 85 percent of its 12-month shelf life remaining upon delivery, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the product, except for specific functional exceptions outlined in NAVSEA standards. Hazardous communication compliance is mandatory under OSHA’s Globally Harmonized System, requiring submission of revised Safety Data Sheets and compliant labels prior to award, along with employee training on updated standards. Packaging must include glass or plastic jars conforming to PPP-C186, and all shipments must be palletized per DLA requirements and marked with passive RFID tags if required by DFARS clause 252.211-7006. Unique Item Identifier markings must be 2D barcoded on all packaging levels. Delivery is FOB destination within 20 days to Hurlburt Field, Florida, with zero tolerance for quantity variance, and traceable freight shipping is required—parcel post is prohibited. The Solicitation Number is SPE8E6-26-T-3976, with a response deadline of August 17, 2026, and the required delivery date is July 30, 2026.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

CLEANING SOLVENT, GE

Solicitation # SPE8E5-26-T-3759

This contract specifies the procurement of CLEANING SOLVENT, GE, identified by NSN 7930-01-367-0994 and part number P28288-16OZB-P-1, with a quantity of one box to be delivered within five days of award. The item is classified as a TYPE I (CODE H) with a non-extendable shelf life of 12 months and must comply with DLA packaging standards under MIL-STD-2073-1E and MIL-STD-129 for marking. All packaging, marking, and shipping must adhere to hazardous material requirements, and parcel post is explicitly prohibited—shipment must occur via the fastest traceable means. The delivery is FOB destination, with inspection and acceptance points also at the destination, and no quantity variance is permitted. The solvent must be delivered to the designated address in Westfield, Massachusetts, under solicitation SPE8E5-26-T-3759, with a required delivery date of August 5, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List, and the supplier must follow all specified packaging methods, including use of HM preservation and zero cushioning or dunnage materials. Government-only fields identify the delivery priority as RDD 777 and include internal codes for distribution and tracking.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

DDSP Refrigerant gel packs

Solicitation # SP330026Q0231

The U.S. Department of Defense, through DLA Distribution in New Cumberland, Pennsylvania, is soliciting bids for refrigerant gel packs under a firm-fixed-price purchase order to be issued on Standard Form SF-1449. This acquisition is structured as a Woman-Owned Small Business Set-Aside under the SBA Certified WOSB Program, with the North American Industry Classification System code 325998 and a size standard of 650 employees. The Product or Service Code for this procurement is 6850, and it is not subject to Defense Priorities and Allocations System rating. The solicitation number is SP330026Q0231, with a response deadline of August 6, 2026, at 4:00 p.m. EDT. The contract will be awarded to a single vendor, and all proposals must be submitted via the SAM.gov platform. Primary point of contact for inquiries is Adrienne Hawkins, reachable by phone at 614-693-1280 or email at Adrienne.hawkins@dla.mil. The place of performance is designated as New Cumberland, Pennsylvania, with the delivery address matching the DLA Distribution facility at ZIP 17070-5002.

DLA Distribution

POSTED

DEADLINE

Customs Standards

Solicitation # HPF-2026-135452

The FDA Denver Human and Animal Food Laboratory is seeking custom-prepared, multi-component analytical reference standard solutions to support the regulatory analysis of veterinary drug residues in aquaculture, dairy, and game-meat products. These standards are critical for initial and continuing calibration verification in liquid chromatography–mass spectrometry methods used for screening and confirmatory testing. The requirements specify that the standards must be precisely formulated to meet the lab’s analytical protocols, ensuring accuracy and reliability in detecting and quantifying drug residues at low concentrations. The solutions will be used in compliance with federal food safety regulations to safeguard public health and ensure the integrity of the food supply chain. Solicitation number HPF-2026-135452 was posted on August 4, 2026, with responses due by August 7, 2026, at 4:00 p.m. Eastern Time. This is a sources-sought notice under NAICS code 325998, with no set-aside provisions applied. The contract is managed by the FDA Office of Acquisition and Grant Services under the Department of Health and Human Services, located in Rockville, Maryland, but the performance location is the Denver laboratory in Colorado. The primary point of contact for inquiries is David Seid, reachable via email or phone, and additional details can be found through the provided SAM.gov link. All proposals must demonstrate technical capability to deliver high-purity, stable, and certified reference standards meeting strict regulatory standards for analytical use.

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

Activated Powdered Carbon Supply and DeliveryThe City of Spokane is seeking a vendor to supply activated powdered carbon in 900-pound bags over a five-year period under a subcontract arrangement. Delivery is required F.O.B. at the vendor’s facility to Spokane, Washington, with the vendor fully responsible for packaging, labeling, and fulfilling orders on demand throughout the term. The contract falls under NAICS code 325998 and is open for responses until September 22, 2026, with the solicitation posted on August 3, 2026. The vendor must ensure consistent, reliable supply and adherence to all requirements for product规格 and shipment logistics to meet the city’s operational needs without interruption.

City of Spokane

POSTED

DEADLINE

in about 2 months

Supply of DPD Total Chlorine Test Reagent (Hazardous Material)The contract calls for the supply and delivery of 65 powder pillows of DPD Total Chlorine Reagent, identified by NSN 6550014607597, which must meet all applicable military and federal hazardous material standards. This is a subcontract under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, with the place of performance listed as FPO with a zip code of 96632. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026, indicating a narrow window for submission. The NAICS code 325998 categorizes this under other chemical product and preparation manufacturing, reflecting the specialized nature of the reagent. The reagent is classified as hazardous material, requiring full compliance with handling, packaging, and transportation regulations to ensure safety and regulatory adherence throughout the supply chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Hazardous and Radioactive Materials Packaging and LabelingThe contract requires the packaging, preservation, and labeling of components that contain hazardous or radioactive materials in strict compliance with MIL-STD-129 and DFARS 252.223-7001, ensuring adherence to Department of Defense standards for safety, documentation, and transport readiness. All work must be performed to meet rigorous federal regulations governing the handling of dangerous substances, with precise labeling protocols and preservation techniques to maintain material integrity and regulatory compliance throughout the supply chain. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is classified as a subcontract under NAICS code 325998, indicating specialized manufacturing activities for other industries. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, leaving a limited window for qualified vendors to submit proposals. The contracting authority is the Land Supply Chain under the Department of Defense, reflecting the military’s need for tightly controlled logistics support for sensitive materials. While no set-aside provisions or point of contact details are provided, the explicit reference to federal defense regulations and the specific geographic performance site underscores the high-stakes nature of the work and the expectation for certified expertise in hazardous materials management. All participants must be prepared to demonstrate full compliance with all applicable military and regulatory standards to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Sealing Compound (NSN 8030003487888)The contract specifies the procurement and delivery of one unit, totaling 1.000 kilotons, of military-grade sealing compound identified by NSN 8030003487888, with delivery required by August 17, 2026, to Fort Wayne, Indiana, under FOB destination terms. The item is subject to strict military specifications and must meet all performance and quality standards associated with its defense application. The contract is categorized as a subcontract under NAICS code 325998 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, indicating its critical role in sustaining military readiness and operational infrastructure. Although details such as the solicitation number, point of contact, and exact delivery location are not provided, the contract remains binding and time-sensitive, with adherence to the delivery deadline being essential. The posting date of August 3, 2026, suggests this is a recently issued requirement, placing immediate focus on fulfillment and compliance.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Antiseize Compound (5 lbs)The contract entails the procurement and delivery of five pounds of NSN-traceable antiseize compound that meets MIL-spec and ANSI X12 standards, intended for use at Moody Air Force Base. The item is being sourced under a subcontract issued by the Defense Logistics Agency, a component of the Department of Defense, with the North American Industry Classification System code 325998 indicating it falls under other chemical product and preparation manufacturing. The solicitation was posted on August 3, 2026, and the delivery is to be made to the specified military installation, ensuring the compound is fully compliant with military and industry specifications for performance and traceability. The contract reference is linked through DIBBS, identifying the award and delivery details under contract SPE8ES24D0005 with delivery order SPE8ES26F73PF and count 296789.

Defense Logistics Agency

POSTED

DEADLINE

High-Performance Non-Asbestos Material SupplyThe contract seeks the supply of raw or semi-finished non-asbestos composite materials designed for use in high-pressure, high-temperature sealing applications within defense systems, specifically targeting the Fluid Handling Division of the Department of Defense. These materials must meet stringent performance standards to ensure reliability and safety in mission-critical environments, with the place of performance designated as Cherry Point, North Carolina, ZIP 28533-5040. The solicitation is classified as a subcontract and falls under the NAICS code 325998, which covers other chemical product and preparation manufacturing, indicating the specialized nature of the materials required. The opportunity was posted on August 3, 2026, and responses are due by August 14, 2026, leaving vendors a narrow window to prepare and submit proposals. While no solicitation number or point of contact is provided, the contract can be accessed through the DIBBS portal via the specified UI link. The absence of a set-aside designation suggests the contract is open to all eligible suppliers, and the focus remains on technical capability and material performance rather than socioeconomic criteria. Suppliers must ensure compliance with defense-grade specifications for sealing components operating under extreme conditions.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

OIL FILTER CUTTER

Solicitation # SPE7L1-26-T-914K

The contract is for the procurement of one oil filter cutter with NSN 2940-01-536-9281 and part number 175-7546, supplied by approved vendors including Caterpillar Inc, Finning UK Ltd, and Hastings Deering (Aust) Pty Ltd. The item is classified as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit of issue as a single unit and no tolerance for quantity variance. The delivery is FOB origin with a 20-day lead time, and inspection and acceptance occur at the destination. The shipment must be dispatched using the fastest traceable means, excluding parcel post, with delivery addressed to W8T2 TX ARNG FMS 20 at 301 East Regis Street Suite 1122, Lubbock TX 79403-1122. The RDD is 777, and the shipment must be marked accordingly. The contract reference is SPE7L1-26-T-914K, with a required delivery date of July 30, 2026. The solicitation was posted on August 4, 2026, and responses are due by August 17, 2026. The contracting office is under the Department of Defense’s Land Supply Chain, with Kristina Derry listed as the primary point of contact. All items must be properly labeled and palletized per DLA specifications, and government identification must be removed from non-accepted supplies. Configuration changes require formal engineering change proposals or variance requests.

Other Motor Vehicle Parts Manufacturing

POSTED

about 19 hours ago

DEADLINE

COVER, PROTECTIVE, DU

Solicitation # SPE7L1-26-T-914F

The contract pertains to the procurement of three protective dust and moisture seals, identified by NSN 5340-01-572-0086 and part number 780-518-15SG6-WS, manufactured by Glenair Inc. These items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, marking codes, and palletization aligned with DLA packaging guidelines. The supplies are to be delivered FOB destination within 20 days of contract award, with zero variance permitted in quantity, and inspection and acceptance both occurring at the destination. The delivery address is MALS-12 at MCAS Iwakuni, Japan, with a parcel post address for FPO AP 96310-7161, and transportation logistics reference DLA procedural notes C19 and C20. The requirement is part of solicitation SPE7L1-26-T-914F, posted August 4, 2026, with responses due by August 17, 2026, and the original required delivery date set for July 30, 2026. All documentation, including source approval requests and hazardous material handling, must satisfy related DLA clauses, and the unit of issue is each, priced at $3.00 per unit for a total of $9.00.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7L1-26-Q-1439

This contract is for the procurement of a metal tube assembly identified by NSN 4710-01-675-9509 and part number P5574-2 from TRANSDIGM INC, with a required quantity of 69 units to be delivered within 246 days of award. The item must strictly conform to the source-controlled drawing numbered 53711-7124755 Revision C dated 04/09/2016, and only suppliers listed on that drawing are currently approved, though additional qualified sources may exist without being reflected on the drawing. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Mercury or mercury-containing compounds are prohibited unless used in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or Navsea-approved reagents, in which case portable devices must be shockproof and feature a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking following MIL-STD-129 and no special marking codes. Items must be palletized according to DLA standards and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination, with no variance permitted in quantity, and the contract incorporates all applicable DLA procedural notes for transportation and logistics.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-915W

The contract specifies the procurement of 20 units of STRAP, WEBBING with NSN 5340-01-357-0800 under solicitation SPE7L1-26-T-915W, with a required delivery date of October 1, 2026, and a 44-day lead time. All items must be delivered FOB origin with no variance in quantity allowed and are subject to final inspection and acceptance at the destination. Packaging must comply with DLA’s master requirements, prioritizing MIL-STD-129 for marking and labeling, and adherence to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. Palletization must follow RP001 packaging guidelines, and all goods must be marked in accordance with MIL-STD-130N, though proprietary or insufficient identification is prohibited. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Technical and quality criteria are governed by the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and revision control depends on solicitation or award date. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and all transportation requirements are governed by DLAD procedural notes C19 and C20.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-915S

This contract specifies the procurement of a groove pulley identified by Part Number MS20219A1 and NSN 3020-00-541-3227, manufactured in compliance with MIL-DTL-7034F(1) and subject to the Qualified Products List QPL-7034. It is designated as a Navy Critical Safety Item, requiring strict adherence to all quality and safety standards, with any waivers or deviations needing explicit approval from the DSC Contracting Officer. The item must be marked per MIL-STD-129, including lot and serial numbers, contractor CAGE code, and manufacturer details, and packaged in accordance with MIL-STD-2073-1E and DLA packaging requirements. Zero non-conformance acceptance criteria apply under sampling methods such as MIL-STD-1916 or ASQ H1331, with critical attributes subject to the strictest verification levels. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitute chemicals require prior approval. Non-destructive testing must be performed by accredited personnel, and all manufacturing processes must conform to SAE AS9100 quality management standards. The contract requires delivery of 132 units FOB origin within 152 days, with no tolerance for quantity variance, and inspection and acceptance to occur at the point of manufacture. The delivery destination is DLA Distribution San Diego, with specific packaging, marking, and palletization instructions defined under applicable military standards. The pricing is set at $132.00 per unit for a total value of $17,424.00. The solicitation was issued under SPE7L1-26-T-915S, with a response deadline of August 17, 2026, and a required delivery date of August 27, 2026. Defense information controls apply, and the item falls under a primary QPL or QML, meaning only qualified manufacturers may supply it. All technical and quality requirements referenced through R-numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date as applicable. Unit of issue is each, and transportation protocols follow DLA procedural notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

PLUG, PROTECTIVE, DUST A

Solicitation # SPE7L1-26-T-910W

The contract is for a protective dust and moisture seal plug identified by NSN 5340-01-357-7621, with a quantity of one unit, to be delivered within five days of award under purchase request 7017720090. The item is procured through a federal solicitation issued by the Department of Defense’s Land Supply Chain, with the solicitation number SPE7L1-26-T-910W, posted on August 4, 2026, and response deadline set for August 17, 2026. The place of performance is Fort Carson, Colorado, with the NAICS code 332510 indicating manufacturing within the engine and turbine manufacturing sector. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the effective revision tied to the solicitation issue date, award date, or any amendment date. The supplier, KHD Deutz of America Corp in Norcross, Georgia, must ensure compliance with DLA packaging standards and remove any government identification from non-accepted supplies. The primary point of contact for the solicitation is Michael Nordahl, reachable via email and phone provided in the contract data.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

STRAP, RETAINING

Solicitation # SPE7L1-26-T-912K

The contract pertains to the procurement of one retaining strap identified by NSN 5340-01-700-7621 under solicitation SPE7L1-26-T-912K, issued by the Department of Defense through the Land Supply Chain. Delivery is required within five days of award at FOB origin, with inspection and acceptance occurring at the destination, specifically the Fleet Readiness Center Southeast in Jacksonville, Florida. Strict packaging requirements mandated by MIL-STD-2073-1E and DLA packaging standards must be followed, including compliance with MIL-STD-129 for marking and adherence to specified packaging codes and methods. Ozone-depleting chemicals are strictly prohibited, and any substitutes must be approved unless already authorized by specification. The item must be shipped via the fastest traceable means, with parcel post explicitly forbidden. Technical compliance is governed by multiple reference drawings dated April 10, 2022, and the supplier must adhere to the Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and the handling of covered defense information. Full and open competition applies, with no set-aside designation. The contract enforces a zero variance in quantity, and the required delivery date is August 5, 2026. All documentation and compliance are tied to the DLA Master List of Technical and Quality Requirements, and the supplier must be prepared to support government audit and data tracking needs, including designated points of contact and supply chain identifiers.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-913C

This contract issued by the Department of Defense through the Land Supply Chain under solicitation SPE7L1-26-T-913C seeks one unit of NSN 3040-01-628-1622, identified as W S DARLEY & CO P/N X8102, under the CAM,CONTROL designation. The item must be delivered within five days of award, FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and codes, while marking follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging standards, and the shipment is designated as RDD 999/NMCS with transportation governed by DLAD PROC NOTE C19 and C20. The delivery destination is the Reparable Issue Point at Camp Kinser, with distribution managed through M20220. The required delivery date is August 3, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, applicable based on acquisition size and amendment dates. The unit of issue is each (EA), and the contract is classified under NAICS code 333613 with no set-aside designation. Primary point of contact is Kristina Derry, reachable at the provided phone and email.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

SPRING, HELICAL, COMP

Solicitation # SPE7L1-26-T-916A

This contract specifies the procurement of a helical compression spring identified by NSN 5360-01-026-1107 and part number TDP Rev A Gen 1 IAW MIL-STD-1330E, with a requirement for 17 units to be delivered within 154 days. The spring is designated as a critical application item requiring government engineering source approval and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific packaging, cleaning, and marking protocols. It mandates oxygen cleaning and packaging in accordance with MIL-STD-2073-1E and MIL-STD-129, with each unit container labeled with an O2 cleaning certificate and marked with “SPECIAL CLEAN O2-N2.” The item is subject to a zero variance in quantity and is to be delivered FOB origin to Industries of the Blind Inc in Greensboro, NC, with inspection and acceptance occurring at destination. The contract explicitly prohibits the use of ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for limited functional applications authorized by NAVSEA, such as in batteries or sensors, with additional containment requirements for portable items. It enforces configuration change management through Engineering Change Proposals and requires suppliers to comply with Qualified Products Lists or Qualified Manufacturers Lists where applicable. Documentation for source approval, removal of government identification from non-accepted supplies, and covered defense information protocols are also binding. The item is classified as a restricted source, and the supplier must adhere to the DLA Packaging Requirements and Transportation Procedures noted in DLAD Proc Notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-916A, with a response deadline of August 17, 2026, and a required shipment date of January 19, 2027, under a fixed unit price of $17.00 per unit.

Spring Manufacturing

POSTED

about 19 hours ago

DEADLINE

RADIATOR, ENGINE COO

Solicitation # SPE7L1-26-T-915A

This contract is for the procurement of five engine radiator units identified by NSN 2930-01-709-2109 and part number 2604117C92, with a unit price of $5.00 and a total contract value of $25.00. Delivery is required within 20 days from the date of award, with shipment FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the origin point, and packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 without special codes. The item must not contain any Class I ozone-depleting chemicals, and mercury or mercury-containing compounds are prohibited unless specifically exempted for approved applications such as certain batteries, lighting, instruments, or chemical reagents as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Substitute chemicals require prior approval unless authorized by the specification. The end user is the Jordan Armed Forces, with freight shipping directed through Serra International Inc. in Newark, New Jersey, and the order is managed under the Defense Logistics Agency using the unit of issue EA. The solicitation number is SPE7L1-26-T-915A, with a required delivery date of August 4, 2026, and the contract falls under NAICS code 333618 for heating equipment manufacturing.

Other Engine Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-913T

The contract specifies the procurement of a gasket with NSN 5330-00-391-8381 and part number N0900367 from LESLIE CONTROLS, INC., with a quantity of two units to be delivered within 20 days of contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, including use of a medium duty, waterproof, greaseproof, opaque bag meeting MIL-DTL-117, Type II, Class C, Style 1, particularly for direct vendor delivery, foreign military sales, and stock shipments. Marking must follow MIL-STD-129 with no special labeling required. The gasket must not contain asbestos as defined by FED-STD-313, and mercury or mercury-containing compounds are strictly prohibited unless exempted for specific functional uses such as batteries, fluorescent lights, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA; any permitted mercury-containing devices must have shockproof design and a secondary containment boundary per NAVSEA 5100-003D. Packaging and palletization must adhere to DLA standards, and hazardous material shipping details require use of traceable freight services only—parcel post is prohibited—with the delivery address designated to the Naval Computer and Telecommunications Station Cutler in Maine. The contract is governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The solicitation number is SPE7L1-26-T-913T, with a response deadline of August 17, 2026, and the original required delivery date is July 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

BRACKET, VEHICULAR COMP

Solicitation # SPE7L1-26-T-913F

This contract issued by the Department of Defense through the Defense Logistics Agency specifies the procurement of one vehicular bracket, part number 402/H2230 with NSN 2590-01-712-3185, under solicitation SPE7L1-26-T-913F. The item must be delivered within five days of contract award with no tolerance for quantity variance, shipped FOB origin, and inspected and accepted at the destination. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific methods for preservation, wrapping, and palletization per DLA’s packaging requirements. The item must be marked with the provided special marking code and shipped via traceable freight methods, excluding parcel post, to the designated government freight address in Huntsville, Alabama. The contract strictly prohibits the use of Class I ozone-depleting chemicals in any form and requires any substitute materials to be submitted for approval unless explicitly authorized by the specification. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision controls tied to the solicitation or award date depending on the acquisition size. The unit of issue is established per DoD standards, and the item is designated for government use with specific identification codes including IPD, DIC, and project references. The required delivery date is August 3, 2026, and the contract’s point of contact is Kristina Derry of the Land Supply Chain organization.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE