This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply and Delivery of Flow Control Valve (NSN: 4810015673122)

Closed

Federal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M1-26-T-326Q

This contract is for the procurement of two fluid valve stems, identified by NSN 4820012203919 and part number 2192-0062-1 from Mission Systems Orchard Park Inc. The items are designated as critical application items and must be delivered within five days of the order. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically Tinker AFB in Oklahoma. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129, and prohibits the use of Class I ozone-depleting chemicals. All technical and quality requirements are governed by the DLA Master List. Shipments must be sent via the fastest traceable means, and the use of parcel post is explicitly forbidden.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Fluid Valve Stems (NSN 4820012211002)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-248G

This solicitation from the Department of Defense, specifically the DDSP New Cumberland Facility, is for the procurement of 48 fluid valve stems under National Stock Number 4820-01-466-5297. The contract requires delivery within 140 days after receipt of order and falls under NAICS code 332912. The procurement is subject to strict export control regulations, including ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Eligible contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires to access the controlled technical data. All items must also adhere to DLA packaging requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-248L

This contract is for the procurement of three 8-inch fluid valve stems, identified by NSN 4820-01-277-6531 and Leslie Controls part number NC344333. The items are designated as critical application items and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The required delivery date is September 5, 2027, with a delivery window of 355 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA. Inspection and acceptance will occur at the destination, and the shipping terms are FOB Origin.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-248B

This contract is for the procurement of five fluid valve stems, identified by NSN 4820-01-171-3322 and part number 301781-0114 from Diamond Power Intl Inc. The agreement is managed by the Defense Logistics Agency under solicitation SPE7MC-26-T-248B, with a required delivery date of September 2, 2026, and a delivery window of 20 days. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires shipment via traceable means to specified addresses in Norfolk and Virginia Beach. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. All technical and quality requirements are governed by the DLA Master List.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-326D

This contract is for the procurement of 13 valve seats, identified by NSN 4820011015551 and part number 1617204-1 from Mission Systems Davenport Inc. The order is managed by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-326D. Delivery is required within 14 days, with a need date of September 29, 2026. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Compliance with specific technical and quality standards is required, including DLA packaging requirements RP001, marking standards MIL-STD-129, and packaging data MIL-STD-2073-1E. Inspection and acceptance will take place at the destination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-380G

This contract is for the procurement of 205 nonmetallic hose assemblies, identified by NSN 4720015679457 and part number 12505554-016. The items must be manufactured according to the technical data package and basic drawing 19207 12505554 Revision B. Delivery is required within 101 days, with a need ship date of August 25, 2026, and a final required delivery date of October 26, 2026. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to shelf-life requirements for Type I items, specifying a non-extendable shelf life of 120 months. All unit packs, intermediate containers, and exterior containers must be marked in accordance with MIL-STD-129, including the manufacture or assembly date and the expiration date. Packaging and palletization must comply with MIL-STD-2073-1E and DLA packaging requirements. Inspection and acceptance will take place at the origin, and the contract is subject to tailored higher-level quality requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M1-26-Q-1460

This contract is a firm fixed price solicitation for the procurement of one solenoid valve, identified by NSN 4810-15-107-9643 and associated with Isotta Fraschini Motori SPA. The delivery is required within 30 days after order, with the destination and acceptance point set at the USCGC Sledge in Baltimore, Maryland. Shipping must be handled via the fastest traceable means, specifically excluding parcel post. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Key quality and technical constraints include the prohibition of Class I ozone depleting chemicals and the restriction of mercury and mercury-containing compounds, except where functionally required. Additionally, the contractor must maintain supply chain traceability documentation and follow specific sampling methods per MIL-STD-1916 or ASQ H1331 to ensure quality assurance.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-325U

Solicitation SPE7M1-26-T-325U is a request for quotations issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of one fluid valve stem, identified by NSN 4820012211002 and part number 2192-0013-1. This critical application item is categorized under NAICS 332912. The required delivery date is September 2, 2026, with a delivery window of five days after receipt of order. Shipping is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DD Depot OK CNTR RECVG at Tinker AFB, Oklahoma. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Prohibitions are in place against the use of Class I ozone-depleting chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, such as the Buy American Act, the Berry Amendment, and safeguarding covered defense information. Quotations must be submitted via DIBBS by September 14, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FL

Solicitation # SPE7M4-26-T-379J

Solicitation SPE7M4-26-T-379J, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for the procurement of 27 fluid pressure regulating valves. The required items are identified by NSN 4820013110992 and Leslie Controls, Inc. part number N70166. These components are designated as critical application items. The need ship date is August 16, 2028, with an original required delivery date of October 18, 2028. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements via RA001 and the DLA Master List, as well as configuration change management under RQ002. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Material restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and maintaining active registration in the System for Award Management. All quotes must be submitted through the DIBBS portal by September 14, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # W911S226U4369

Solicitation W911S226U4369 is a Request for Quotation for the procurement of 40 new hydraulic bleeder valves, divided into two line items of 20 units each. The requirement specifies Aero Fluid Products part number 7409K7 or an equal alternative. To be considered equal, products must feature a corrosion-resistant steel body, 3A UNF right-hand threads with a nominal size of 0.312 inches, a maximum pressure rating of 3500 PSI, and a maximum operating temperature of 275 degrees Fahrenheit for single response fuel, oil, or hydrocarbon use. This acquisition is a total small business set-aside managed by the W6QM Micc-Ft Drum for the Department of Defense. Offers must be submitted exclusively through the PIEE Solicitation module by September 11, 2026. Required submission documents include technical and price proposals, past performance data, and a completed Attachment 1 regarding the country of origin. The government will evaluate awards based on price and technical factors, awarding to the responsible offeror most advantageous to the government. Key delivery requirements include a preferred 30-day delivery window, F.O.B. destination shipping, and the mandatory inclusion of a certificate of conformance with the product. Payment terms are set at net 30.

POSTED

DEADLINE

Solicitation # N6883626Q0073

Solicitation N6883626Q0073 is a request for firm-fixed-price quotes for the procurement of replacement fuel transfer hoses for the Defense Support Fuel Point at Naval Station Mayport, Florida. The requirement consists of three line items: sixteen 2-1/2 inch by 50 foot coupled hoses with MXF AL Camlock and SS Crimp Sleeves, eight 4 inch by 50 foot uncoupled Type A hoses, and the associated shipping to the destination. This is a total small business set-aside under NAICS 332912, managed by NAVSUP FLT LOG CTR Jacksonville. All hoses must comply with MIL-DTL-22240G(SH) and ASTM D 380, including pressure testing to 300 PSI and specific branding requirements such as the manufacturer's name, date of manufacture, and nominal size. Type A hoses must be specifically marked as Alongside Fueling only. Delivery is required within 60 work days from the date of award receipt, with inspection and acceptance occurring at the destination. The government will award the contract to a responsible offeror based on a combination of price and technical capability. Technical evaluation requires a specification sheet demonstrating a clear understanding of the requirements and confirmation of the delivery schedule. Submissions must be provided in PDF format, divided into a price volume and a technical volume, and sent to the designated points of contact by the September 9, 2026, deadline. Invoicing is to be processed electronically through the Wide Area WorkFlow system.

Navsup Flc Jacksonville Erp

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

Two units of a critical application flow control valve, identified by NSN 4810015673122, must be manufactured or supplied in full compliance with federal specifications and delivery requirements established by the Department of Defense. The contract requires strict adherence to labeling, packaging, and shipping standards set by the Defense Logistics Agency to ensure proper handling and integration into military supply chains. The work is assigned to the DDSP NEW CUMBERLAND FACILITY, with performance required at the location in NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation, classified under NAICS code 332912 for other fabricated metal product manufacturing, is structured as a subcontract and was posted on July 16, 2026, with responses due by July 27, 2026. All submissions must meet the technical and logistical criteria outlined by the contracting authority to be considered eligible for award.

General Info

Two Defense Logistics Agency-compliant flow control valves due July 27, 2026, at New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7MC-26-T-139E.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, FLOW CONTROL

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture or supply of 2 units of a critical application flow control valve meeting federal specifications and delivery requirements. Includes compliance with labeling, packaging, and shipping standards for DLA.