Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Delivery of PRE Lubricating Oil (NSN 9150002312356)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of one container of military-grade lubricating oil identified by NSN 9150002312356 to the USS PAUL HAMILTON (DDG 60) at FPO AP 96667. The scope includes full sourcing, proper packaging, accurate labeling, and traceable transportation of the product, all of which must comply strictly with DLAD C19/C20 and DPAS regulatory standards to ensure operational readiness and logistical integrity. The deliverable is designated for U.S. Navy use and requires adherence to military-specification protocols throughout the supply chain. This transaction is classified as a subcontract under the NAICS code 424690 and is administered by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 19, 2026, and the award reference links to the DIBBS system for official documentation. Delivery must be completed to the specified forward operating location with full accountability and compliance, as failure to meet the regulatory or logistical requirements could compromise mission-critical support to the vessel. No set-aside provisions are indicated, and the contract is managed without public solicitation details.

General Info

One container of military lubricating oil delivered to USS PAUL HAMILTON per DLAD C19/C20 and DPAS standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

424690 - Other Chemical and Allied Products Merchant WholesalersView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one container of military-grade lubricating oil (NSN 9150002312356) to USS PAUL HAMILTON (DDG 60) at FPO AP 96667. Includes sourcing, packaging, labeling, and traceable shipping compliant with DLAD C19/C20 and DPAS regulations.

Similar Contracts

Same NAICS industry code

Packaging and Unit Container SealingThe contract requires the provision of sealed unit container packaging designed to prevent damage during transit, with outer commercial shipping containers that meet the standards for lowest-rate common carrier transport. All packaging must ensure product integrity through secure sealing and structural suitability for standard freight shipping methods, with performance specifically tied to the location of Austin, Texas, identified by the ZIP code 78703-0000. The solicitation falls under the NAICS code 424690, indicating it relates to other miscellaneous nondurable wholesale merchant distributors, and is categorized as a subcontract opportunity under the Department of Defense’s Medical Supply Chain MD Surg FSF. Respondents must submit proposals by the deadline of July 27, 2026, with the solicitation initially posted on July 19, 2026, leaving a window of eight days for submissions. No set-aside type or description is specified, meaning the opportunity is open to all eligible subcontractors without restriction based on small business status or other classifications. The contract does not provide a point of contact, but detailed information and submission instructions are accessible through the DIBBS platform via the provided link, which serves as the official portal for response and tracking. The focus is on cost-effectiveness, durability, and compliance with logistics requirements for military medical supply distribution.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract calls for the provision of packaging, labeling, and palletization services for 50 magnetic reader units, strictly adhering to MIL-STD-129 standards to ensure uniformity, traceability, and compatibility with Department of Defense logistical systems. This includes the implementation of bar-code labeling for accurate identification and inventory tracking throughout the supply chain, with all materials and processes meeting federal military packaging requirements. The work must be completed in accordance with specified military specifications to support secure and efficient distribution. The solicitation is classified as a subcontract under NAICS code 424690, with a response deadline of July 30, 2026, and was posted on July 19, 2026. Performance of the contract is required at Tracy, California, with a zip code of 95304-5000, under the oversight of the Department of Defense’s Construction & Equipment T & IFO EQ office. All submissions must be made through the designated DIBBS portal, and compliance with military packaging protocols is mandatory for award consideration.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Commercial Item Subcontracting (General Supplier Pool)This contract establishes a general supplier pool to support the Defense Logistics Agency’s recurring and variable demand for adhesive and related National Stock Number items, focusing on commercial suppliers capable of reliable distribution and strict compliance with hazardous material handling protocols. Suppliers are expected to meet federal standards for the safe storage, transportation, and delivery of regulated substances while maintaining consistent supply chain performance under fluctuating operational requirements. The opportunity is open to qualified commercial entities without set-aside restrictions, and performance will be evaluated based on adherence to defense-grade logistics and compliance benchmarks. The solicitation, issued under NAICS code 424690 for Other Commercial Equipment Merchant Wholesalers, is managed by the Department of Defense through the Defense Logistics Agency and requires responses by July 27, 2026. Suppliers must be prepared to handle the full lifecycle of adhesive products including packaging, labeling, documentation, and hazardous material compliance as dictated by federal regulations. While no specific location is mandated for performance, all deliveries must meet DLA’s global logistical needs, and suppliers are expected to demonstrate capability for scalable, responsive service with full regulatory alignment. Participation requires registration through the designated DIBBS portal.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hazardous and Regulated MaterialsThe contract pertains to the procurement and delivery of hazardous and regulated materials including chemicals, solvents, and radioactive substances that must comply with federal and defense specifications. All items require accurate classification and accompanying Safety Data Sheets to ensure proper handling, storage, and transportation in accordance with safety and regulatory standards. The work is to be performed at Fort Carson, Colorado, with a zip code of 80913-4093, and is classified as a subcontract under NAICS code 424690, which relates to wholesale trade of chemical and allied products. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026. The contracting entity is the Department of Defense through its Land Supply Chain organization, and all deliveries must meet stringent defense-related requirements for safety, compliance, and documentation.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hazardous Materials with OSHA-Compliant LabelingThe contract entails the supply of hazardous components specifically designed for use in SHIELD units, requiring full compliance with OSHA 29 CFR 1910.1200 regulations for hazard communication, including proper labeling and provision of Safety Data Sheets for all materials. All items must adhere to MIL-STD-129 standards for military packaging, ensuring durability, traceability, and compatibility with Department of Defense logistics systems. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses certified by the SBA, and is classified under NAICS code 424690 for other miscellaneous nondurable goods merchant wholesalers. The response deadline is July 30, 2026, with materials required to be delivered to the place of performance in New Cumberland, Pennsylvania, ZIP 17070-5002. The contract is issued under the Department of Defense through the Construction & Equipment Manu & Con agency, with no point of contact provided in the posting, and all submissions must be made through the DIBBS portal linked in the solicitation.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Engine Lubricating OilThe contract entails the supply and delivery of 5,000 drums, each containing 55 gallons of military-grade engine lubricating oil designated by NSN 9150014961939, to Sweihan Air Base in the United Arab Emirates. Delivery is governed by FOB Destination terms, placing full responsibility for transportation, logistics, and risk on the contractor until the product is received at the designated location. The contractor must ensure complete and timely delivery no later than August 3, 2026, with no tolerance for delays. The order is issued under a subcontract by the Defense Logistics Agency on behalf of the Department of Defense, classified under NAICS code 424690 for wholesale trade of industrial supplies. All obligations, including packaging, handling, and compliance with military specifications, rest solely with the vendor, and failure to meet the delivery deadline may result in contract breach penalties.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Food-Grade Lubricating OilThe contract entails the supply and delivery of five gallons of NSF H1 certified food-grade lubricating oil specifically for use in food processing equipment aboard the USS PINCKNEY DDG 91. This lubricant meets stringent health and safety standards required for environments where incidental food contact is possible, ensuring compliance with federal food safety regulations. The product is critical for maintaining the operational integrity and hygiene of onboard food preparation systems, preventing equipment failure and safeguarding crew health. The contract is classified as a subcontract under the NAICS code 424690, which pertains to other miscellaneous nondurable goods merchant wholesalers. It was issued by the Defense Logistics Agency, a component of the Department of Defense, reflecting its role in supporting military logistics and readiness. The posting date indicates the opportunity was made available in July 2026, and while specific delivery details and performance location are not provided, the equipment it serves is located on a U.S. Navy vessel, implying the oil must be delivered to a designated naval logistics hub or directly to the ship in compliance with military supply protocols.

Defense Logistics Agency

POSTED

DEADLINE

Supply of General Lubricating Oil (NSN 915008368641)The contract calls for the procurement and delivery of 10 dozen units of general-purpose lubricating oil identified by NSN 915008368641 to a U.S. Navy vessel operating overseas. The supply must fully comply with Defense Logistics Agency specifications and meet the requirements of the Defense Priorities and Allocations System (DPAS) to ensure timely and prioritized fulfillment under national defense protocols. The lubricating oil is classified under NAICS code 424690 and is being procured through a subcontract arrangement managed by the Department of Defense through the Defense Logistics Agency. Performance is targeted for an overseas location to support active naval operations, though specific delivery coordinates are not detailed. The contract was posted on July 19, 2026, and the award is linked to the DIBBS system under reference SPE4AX16D9008 with delivery tracking number SPE4A626FCVGG and contract count 263045.

Defense Logistics Agency

POSTED

DEADLINE

Shelf-Life Compliant Product Supply (TYPE I / CODE H Items)The contract involves the supply of TYPE I products coded as H, which must adhere to a strict 12-month non-extendable shelf life requirement, ensuring all delivered goods remain viable and safe for use within this limited window. Full lot traceability and continuous expiration monitoring are mandatory to guarantee compliance with DLA shelf-life requirement RS011, emphasizing the need for rigorous inventory control and documentation throughout the supply chain. All items must be delivered to the specified performance location at Camp Lejeune, North Carolina, with zip code 28542-0138, and the supplier is expected to meet all operational and regulatory standards without exceptions or extensions beyond the stipulated shelf life. This is a subcontract opportunity under NAICS code 424690, posted by the Fluid Handling Division of the Department of Defense, with responses required by July 30, 2026. The solicitation is open for bidding through the DIBBS platform and targets suppliers capable of delivering high-integrity, time-sensitive medical or mission-critical products that align with defense logistics standards. No set-aside provisions are specified, and no point of contact details are provided in the listing, indicating that all inquiries must follow the procedural guidelines on the official DIBBS webpage linked in the posting.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Industrial Cleaner and Lubricant (NSN 9150016634643)The contract involves the supply and delivery of ten units of military-grade cleaner and lubricant identified by NSN 9150016634643, with FOB destination terms requiring delivery to Al Udeid Air Base in Qatar, via the APO AE 09309 address. The procurement is managed under a subcontract by the Defense Logistics Agency, under the Department of Defense, and is classified under NAICS code 424690 for other miscellaneous nondurable goods wholesale. The contract was posted on July 19, 2026, and is not subject to any specific set-aside provisions. Delivery obligations are defined by the FOB destination clause, meaning the seller assumes responsibility for all transportation risks and costs until the product reaches the final destination at Al Udeid Air Base, where acceptance will occur. The contract reference details include SPE4AX16D9008 as the master contract and SPE4A626FZY67 as the delivery order identifier.

Defense Logistics Agency

POSTED

DEADLINE

Chemical Sealer Supply (NSN 6850014432591)The contract entails the supply of 10,000 kilograms of chemical sealer identified by Part Number ME-72 and National Stock Number 6850014432591, complying with Defense Logistics Agency specifications for delivery to a U.S. Navy vessel. The requirement is part of a subcontract under the North American Industry Classification System code 424690, which pertains to wholesale trade of chemical and allied products. The agreement is managed by the Defense Logistics Agency, a branch of the Department of Defense, and was posted on July 19, 2026, indicating its placement in the federal procurement pipeline for future execution. Although specific delivery dates and performance locations are not detailed, the contract necessitates adherence to stringent military standards for material quality and application suitability in naval environments. The procurement is tracked via the DIBBS system with the referenced contract and delivery identifiers, ensuring traceability and accountability throughout the supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Chemical Sealer Supply and DeliveryThe contract entails the supply and delivery of 4,000 cubic yards of Chemical Sealer, identified by NSN 6850015519719 and part numbers PR-2202B-1 and PR-2202X-B-1, to China Lake, California. Delivery is specified under FOB destination terms, meaning the contractor assumes responsibility for all costs and risks until the material reaches the designated delivery point. The agreement falls under the NAICS code 424690, which corresponds to wholesale trade of miscellaneous durable goods, and is structured as a subcontract within the Department of Defense framework, managed by the Defense Logistics Agency. The solicitation was posted on July 19, 2026, and the contract is linked to award and delivery identifiers SPE4AX16D9010 and SPE4A626FCVGU, indicating formal procurement under a military logistics system. No specific set-aside provisions or point of contact details are listed, and the place of performance and office address fields remain unpopulated, suggesting the delivery location is the primary operational focus.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE ASSEMBLYThe valve assembly is a critical application item identified by part number 6D227 and NSN 4820-01-654-3727, supplied by Allen Aircraft Products Inc, with a single unit required under purchase request 7017522901. Delivery is due within 20 days from contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must comply with DLA’s procedural requirements, and shipment must be made by traceable means—parcel post is prohibited. The item is subject to Federal Aviation Administration airworthiness approval and must be uniquely identified with IUID per MIL-STD-130 and DFARS 252.211-7003. The contractor must retain full supply chain traceability documentation as outlined in DLAD Procurement Note C03. Sampling follows zero-defect standards using MIL-STD-1916 or comparable methods, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the contract incorporates specific CDRLs and data packages. The delivery address is Joint Base McGuire-Dix-Lakehurst, New Jersey, and the point of contact is Paula McClary at DLA. The solicitation was issued with a response deadline of July 31, 2026, and the original required delivery date is July 15, 2026.

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

SEALANT, VACUUM BAGThe contract is for SEALANT, VACUUM BAG with NSN 9330012899652 and part number GS-100, sourced from AIRTECH INTERNATIONAL INC, under solicitation SPE8E5-26-T-3633. The item is classified as a critical application product with a non-extendable shelf life of 12 months as a TYPE I (CODE H) item, requiring strict compliance with packaging, marking, and shipping standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life identification. The unit of issue is the box (BX), with each box containing 1,000 feet of sealant, and delivery is required within 20 days FOB destination without any quantity variance permitted. The product must be shipped via traceable freight, not parcel post, to two distinct destinations: one addressed to USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 and another to NELLIS AFB NV 89191, both requiring adherence to DLA packaging and hazardous materials shipping protocols. The contract enforces technical and quality requirements referenced from the DLA Master List, with provisions for government identification removal upon rejection, and stipulates inspection and acceptance occur at the delivery point. The original required delivery date is July 16, 2026, with a solicitation response deadline of July 31, 2026.

All Other Plastics Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

STEM, FLUID VALVEA 1 1/2 inch STEM FLUID VALVE with NSN 4820014773921 is being procured under solicitation SPE7MC-26-T-142E by the Defense Logistics Agency for delivery to the USS DANIEL INOUYE DDG 118 at FPO AP 96691-1500. Only one unit is required with a strict delivery window of 20 days from contract award and no quantity variance allowed. The item is designated as a critical application item and must be manufactured in compliance with DLA packaging requirements and MIL-STD-2073-1E for preparation, with packaging marked according to MIL-STD-129 and no special marking codes applied. The valve must not contain or come in direct contact with mercury or mercury-containing compounds except as explicitly permitted for specific functional components like batteries or instruments, which must meet NAVSEA 5100-003D containment standards. Casting or forging may be involved in production, and any tooling or sourcing challenges must be addressed through the DLA Casting and Forging Assistance portal. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and shipment must comply with DLA transportation procedure notes C19 and C20. The contract requires adherence to the latest revision of the DLA Master List of Technical and Quality Requirements, and all materials must conform to the specified unit of issue as defined by the official DLA Excel reference. The required delivery date is July 16, 2026, with the solicitation open for response through July 31, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

POST, FENCE, METALThe contract specifies the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4 inches nominal outer diameter, 13 feet overall length, and weighing 9.11 pounds per foot, intended for use as gate posts in chain-link fencing systems. The product must comply with Federal Specification RR-F-191K Revision K dated 02/13/2023, and all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements take precedence over any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements for Procurement, with all units delivered in accordance with the designated Quantity per Unit Pack and palletization guidelines. The National Stock Number is 5660-01-015-9800, with a unit price of $92.00 and a total contract value of $8,464. Delivery is required within five days of award, with FOB origin terms, inspection and acceptance occurring at the destination. The delivery destination is Sweihan Air Base, AE 28310, under shipment RDD 777, with transportation governed by DLAD Proc Note C19 and C20. The packaging and marking must reflect the military identity W36N0T and the manufacturer/freight identifier TCN W36N0T61940156. The solicitation number is SPE8E6-26-T-3754, issued by the Defense Logistics Agency under the NAICS code 331221, with a response deadline of July 31, 2026, and a required delivery date of July 17, 2026. Covered Defense Information may apply, and all supplies must be marked and labeled in full compliance with government standards, including the removal of government identification from non-accepted items. The point of contact for the solicitation is Kaitlin Pistory of DLA, with the contract restricted to federal procurement under strict quality and packaging controls.

Rolled Steel Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

SEAT, VALVEThis contract issued by the Defense Logistics Agency mandates the supply of one SEA, VALVE with NSN 4820-01-477-4574 under solicitation SPE7MC-26-T-142C, subject to strict technical and packaging requirements. The item must be delivered within 20 days to FPO AP 96691-1500, FOB Origin, with no tolerance for quantity variance. Packaging must conform to MIL-STD-2073-1E with specific methods including preservative type 31, dry condition, and packaging code U, and marking shall comply with MIL-STD-129 without special coding. All supplies must be free of intentional mercury or mercury compounds unless exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The item is designated as critical application and must be palletized per DLA packaging requirements. Delivery is to the USS DANIEL INOUYE DDG 118, and transportation logistics follow DLAD PROC NOTES C19 and C20. The acceptance and inspection point is at destination, and the original required delivery date is July 16, 2026.

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

VALVE, AUTOMATIC TEMThe contract pertains to the procurement of one automatic tempering valve identified by NSN 4820-01-737-6123 and part number VC2 from TLV Corp DBA 3EG02, classified as a commercial off-the-shelf item. Delivery is required within 20 days FOB destination to the USS ZUMWALT DDG 1000 at FPO AP 96693, with no tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking requirements, while palletization follows DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by specifications. The contract references technical and quality standards from the DLA Master List, with revisions controlled based on acquisition size and amendment dates. Shipment must use the fastest traceable method, explicitly excluding parcel post, and the delivery must meet the original required date of July 9, 2026. The solicitation number is SPE7MC-26-T-142H, issued by the Defense Logistics Agency under NAICS code 332911, with primary point of contact Paula Mcclary.

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

FLUX, SOLDERINGThe contract specifies the procurement of Silver Solder, RMA, Paste, identified by NSN 3439-01-373-7966 and ASTM B32 standard, delivered in 8-ounce units (BT) across three line items totaling four units. Deliveries are due within five days of award and must be shipped FOB destination with zero quantity variance. All items must have at least 85 percent of their 12-month shelf life remaining upon delivery, and packaging must comply with MIL-STD-2073-1E, ASTM D3951-15, and MIL-STD-129, including 2D barcode and MSL labeling. Unit containers must be glass or plastic jars conforming to PPP-C186, and palletization must follow DLA’s RP001 and MD00100452 Rev B standards. Hazardous material handling regulations apply, requiring SDS submissions in GHS-compliant format prior to award, with copies included on every pallet and in WAWF. Mercury and mercury compounds are strictly prohibited unless explicitly exempted for specific functional applications, and fluorescent lamps with mercury must have dual containment. Passive RFID tagging is mandatory if DFARS 252.211-7006 is incorporated, and items must be marked per MIL-STD-130N with no identification of sensitive materiel content. Shipments are directed to multiple DoD locations including USS Makin Island, Spangdahlem AB, and Beale AFB, with freight transport required and parcel post prohibited. The product is classified as a commercial item, and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 2 hours ago

DEADLINE

BATTERY, STORAGEThe contract specifies the procurement of a storage battery with NSN 6140-01-294-6528 and part number PS-12100 F1, supplied by Power-Sonic Corporation, under solicitation SPE7L7-26-Q-2037. The item is classified as a Critical Application Item with a Type I shelf life of 12 months, non-extendable, and must be marked accordingly. All units are subject to firm fixed pricing with zero variance allowed, and must be delivered within 60 days of award. Inspection and acceptance occur at origin, with FOB origin terms applying. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf life, and palletization adheres to DLA’s RP001 requirements. Hazardous material handling follows IP025 directives, prohibiting intentional mercury addition except in functional batteries, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless specified otherwise, and attributes are verified at predefined levels. Shipment must use the fastest traceable means and cannot use parcel post, with delivery directed to FPO AE 09587 via vessel shipment under specific DLA procedural notes. The contract incorporates all referenced technical and quality standards from the DLA Master List, and the vendor must comply with all engineering exceptions, including the use of specific 0.187 x 0.032 inch F1 quick disconnect tabs compatible with AMP INC. FASTON series.

Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHIThis contract is for the procurement of four pneumatic vehicular tires with NSN 2610-01-684-9972 and part number 6H04651 manufactured by CARLISLE TIRE & WHEEL CO, under solicitation SPE7L7-26-T-4371. The item is classified as a restricted source requiring government engineering approval and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The tires carry a non-extendable shelf life of 60 months as defined by RS001 for Type I (Code S) items and are prohibited from containing Class I ozone-depleting chemicals, with any substitutions requiring prior government approval. Delivery is FOB destination within 20 days of award, with no variation allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking codes for shelf life and palletization per DLA packaging requirements, and parcel post is explicitly prohibited. The delivery location is Holloman AFB, New Mexico, with freight shipping instructions and a designated point of contact provided. The original required delivery date is July 16, 2026, and the contract is managed by the Defense Logistics Agency under NAICS code 326211.

Tire Manufacturing (except Retreading)

POSTED

about 2 hours ago

DEADLINE

POWER SUPPLY ASSEMBLYThe contract pertains to the procurement of a single Power Supply Assembly identified by NSN 6130-01-476-2036, with a delivery requirement of 20 days ADO. The solicitation, issued by the Defense Logistics Agency under number SPE7L7-26-T-4377, is open for response until July 31, 2026, and falls under NAICS code 334416 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision tied to the solicitation issue date. The contractor must comply with DLA packaging standards and cannot intentionally introduce mercury or mercury compounds into the product except for specific approved applications such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. The contractor is required to maintain a Cybersecurity Maturity Model Certification Level 2 self-assessment and must remove any government identification from non-accepted supplies. Technical data is not provided by DLA, and performance is to occur at FPO, with Michael Francis designated as the primary point of contact.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-563-6585 under solicitation SPE7MC-26-T-142D, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to the destination FPO AE 09578 aboard USS MESA VERDE LPD 19, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement, with palletization and labeling governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The item must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional uses like batteries, sensors, or instruments authorized by NAVSEA, and any portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Transportation must be via traceable means, prohibiting parcel post, and must follow DLAD Proc Notes C19 and C20 for vessel shipment and first destination transport. The contract reference includes a supplier code SWAGELOK CO 3T9T9 P/N M-62TS4, a required ship date of July 16, 2026, and contact information for Paula Mcclary at DLA for inquiries.

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

TREPANNING TOOL, MACHINThe contract is for the procurement of ten trepanning tools, machine cutter, hole broaching, identified by NSN 3455-01-195-1701 and part number 11104 from Hougen Manufacturing, Inc. Delivery is required within five days of award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance both occur at the destination, the Letterkenny Army Depot in Chambersburg, Pennsylvania. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take priority over it, and all packaging and labeling must adhere to MIL-STD-129 with palletization following DLA Packaging Requirements. The unit of issue is each, with ten units total, and the item must be shipped via the fastest traceable means—parcel post is prohibited. The delivery address, shipping label, and mark for are all directed to Letterkenny Army Depot, and the government identifier W25G1Q61940055 must be included. The required delivery date is July 17, 2026, and the contract solicitation number is SPE8E5-26-T-3632, issued by the Defense Logistics Agency under NAICS code 333515. The technical and quality specifications referenced are governed by the DLA Master List, with revisions controlled by the solicitation issue date or amendment date as applicable.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE