This Solicitation opportunity from Government of Canada was posted on May 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply and Delivery of Small Excavator

Closed

BC228884International

Submission Closed07/01/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

DIBBS

REEL, CABLEThe contract specifies the procurement of a single unit of cable reel with NSN 8130-01-587-8466 and part number P0086/300-217-701, issued under solicitation SPE8ED-26-T-1140 for delivery to Fort Stewart, Georgia. Delivery is required within 20 days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at destination, and the item is classified as a critical application item. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following DLA’s RP001 standards, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence. Sampling must adhere to MIL-STD-1916 or an equivalent zero-based inspection plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The contractor must ensure all supplies are properly marked and documented, with removal of government identification from non-accepted items required. Shipments must be sent via the fastest traceable means, excluding parcel post, and all documentation, including source approval requests, must meet the RC001 requirements. Covered defense information provisions apply, and the contract mandates strict adherence to unit of issue standards as defined by the DLA. The delivery is for government use only, with a required delivery date of July 15, 2026, and contact information is provided for the primary point of contact at DLA.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Earth Moving Moldboard (Replacement Part) SupplyThe contract entails the procurement and delivery of two military-spec earth moving moldboards, identified by NSN 3805016171523 and part number 9J7701, specifically for use in military equipment. These components are critical replacement parts intended to maintain operational readiness of existing vehicles or machinery within the Department of Defense fleet. The contract is classified as a subcontract under NAICS code 333120, which pertains to construction machinery manufacturing, indicating the specialized nature of the fabrication and quality requirements tied to military standards. The awarding agency is the Defense Logistics Agency, responsible for ensuring consistent supply chain support across U.S. military branches. The posting date of July 17, 2026, signals a future procurement timeline, suggesting planning ahead for logistical needs, while the lack of a solicitation number implies this was not competitively bid through a public announcement but rather issued under an existing framework or direct allocation. The place of performance and point of contact details are unspecified, indicating that delivery may be directed to multiple or classified military locations without public disclosure. The contract is linked to a DIBBS record, highlighting its traceability within the Department of Defense’s procurement system, ensuring accountability and compliance with defense procurement protocols throughout fulfillment and delivery.

Defense Logistics Agency

POSTED

DEADLINE

GPS Enabled Painting Device (on UTV)This is a presolicitation notice issued by the 158th Fighter Wing under the Department of Defense for market research on a GPS-enabled painting device to be mounted on a Kubota RTV utility task vehicle. The device must be semi-autonomous, capable of airfield painting with limited tolerances without requiring stencils, and designed to integrate with the UTV’s existing power steering, alternator, and front hydraulics. Respondents are invited to describe their capability to supply, install, and provide training for such a system, including any associated software or licensing terms. The notice is strictly for information gathering and does not constitute a binding commitment, solicitation, or guarantee of future funding. All submissions are voluntary and will not influence future vendor evaluations or qualifications, nor will feedback be provided to respondents. The NAICS code 333120 applies with a small business size standard of 1250 employees, and the requirement is set aside exclusively for small businesses. Funding is not currently available, and no contractual obligation will arise until appropriated funds are formally allocated and confirmed in writing by the Contracting Officer. Responses must be submitted in writing, not exceeding ten pages, and are due by July 28, 2026, at 13:00 EST. All future solicitations stemming from this research will be issued independently through the Government Point of Entry, and no information about those potential procurements will be shared based on responses to this notice. Points of contact for inquiries are James Yoshikawa and Kristen Lucey, with performance expected in South Burlington, Vermont.

W7N4 Uspfo Activity Vtang 158

POSTED

DEADLINE

Manufacture and Supply of Clamshell Assembly (NSN 3815-01-463-9925)The contract entails the full manufacturing, assembly, testing, and delivery of a clamshell assembly in strict adherence to military National Stock Number specifications, specifically NSN 3815-01-463-9925. All work must comply with applicable military packaging, labeling, and hazardous materials handling standards to ensure operational safety and regulatory conformity. The scope encompasses end-to-end production, from raw material processing through final quality assurance testing, with delivery targeted to the specified place of performance in Lima, Ohio, under the ZIP code 45804-3700. This is a subcontract opportunity under NAICS code 333120, categorized under the Department of Defense’s Construction & Equipment Manu & Con organization. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026, providing potential bidders a 11-day window to submit proposals. While no set-aside type is designated, the procurement is administered through the Defense Logistics Agency’s DIBBS platform, and interested parties must access the official solicitation via the provided digital link to obtain detailed technical requirements and submission guidelines.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

PARTS KIT, TRACK ENDThe contract pertains to the procurement of 7,588 KT of a Parts Kit, Track End and Parts Kit, Track Shoe Assembly, identified by NSN 2530-01-295-3113, under an indefinite-delivery, indefinite-quantity (IDIQ) arrangement through solicitation SPE7LX-26-U-8523. Delivery is required within 74 days of order placement, with FOB Origin terms placing full responsibility for transportation costs and risks on the contractor until goods are loaded at the point of shipment. Inspection and acceptance occur at the origin, and the contractor must implement a quality system compliant with SAE AS9003 or ISO 9001, ensuring zero non-conformances through sampling methods such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. All items must conform to MIL-STD-2073-1E for packaging and preservation, adhering to Special Packaging Instruction AK12953113 Revision C, and be marked per MIL-STD-129 with barcoding and hazard labeling as required by OSHA’s Hazard Communication Standard. The contract includes stringent cybersecurity obligations requiring CMMC Level 2 certification, compliance with NIST SP 800-171, and implementation of safeguards for covered defense information under DFARS 252.204-7012. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA培训, and authorization. Invoicing must be conducted exclusively through Wide Area WorkFlow (WAWF), and delivery orders are subject to a maximum value of $350,000 per order, with no guaranteed minimum volume over the one-year base period. All offerors must provide a Unique Entity Identifier and CAGE code, certify their size status and socioeconomic classifications, and comply with representations and certifications related to small business programs, defense telecommunications, and prohibited procurement from Communist Chinese military companies. The contract allows for extension via clause 52.217-8 and includes provisions for accelerated payments to small business subcontractors and electronic submission of payment requests, with the Defense Logistics Agency overseeing administration through its Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

ASSEMBLY, CLAMSHELLThe contract is for the procurement of one unit of an ASSEMBLY, CLAMSHELL with NSN 3815-01-463-9925 under solicitation SPE8EE-26-T-2115, issued by the Department of Defense through the Construction & Equipment Manu & Con agency. Delivery is required within 20 days after order award, with the response deadline set for July 27, 2026, and the solicitation posted on July 16, 2026. The NAICS code 333120 identifies the industry as machinery manufacturing, specifically for industrial machinery. The place of performance is in Lima, Ohio, with Philip Ferrara listed as the primary point of contact, reachable via email and phone provided. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Additionally, the contract requires the removal of government identification from any non-accepted supplies as per RQ011, though no specific data is provided to fulfill this requirement at this time.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Backhoe Loader Manufacturing and AssemblyThe contract requires full manufacturing, assembly, and quality assurance for a four-wheel drive backhoe loader equipped with an extendable dipper stick, designed to meet Tier IV emissions standards and deliver a minimum of 85 SAE horsepower. The machine must be housed in a certified ROPS/FOPS cab and be fully operational in extreme cold weather conditions down to -34°F, ensuring reliability in harsh environments. All components and processes must adhere to stringent quality control protocols throughout production to meet performance and safety benchmarks. The contract is classified as a subcontract under NAICS code 333120, with a response deadline of August 7, 2026, and was posted on July 16, 2026. It is being sourced by the State of New Mexico, though the specific office or location for performance is not detailed. Interested parties must submit proposals through the provided online portal before the deadline, and the procurement is open without a specific set-aside designation, allowing all eligible manufacturers to compete.

POSTED

DEADLINE

ExcavatorThe contract titled Excavator, identified by solicitation number W911S226U3728, is a combined solicitation issued by the Department of Defense through the W6QM Micc-Ft Drum office, located in Fort Drum, New York. It is designated as a Total Small Business Set-Aside under SBA guidelines, meaning only small businesses are eligible to compete, as defined by the North American Industry Classification System code 333120, which corresponds to construction machinery manufacturing. The opportunity was posted on July 16, 2026, with responses due by July 20, 2026, at 8:30 p.m. Eastern Time. The place of performance is listed with a zip code of 31904, indicating the work is expected to take place in Georgia, despite the overseeing office being in New York. Primary point of contact for inquiries is John Auer, reachable via email at john.c.auer.civ@army.mil or by phone at 706-505-6399. The solicitation is accessible through the SAM.gov platform, and potential offerors must ensure full compliance with small business certification requirements, as well as any technical specifications related to the procurement of excavators. Interested parties must submit their proposals before the deadline to be considered, and adherence to federal acquisition regulations and set-aside rules is mandatory. This contract represents a targeted opportunity for qualified small businesses to provide essential earthmoving equipment to the U.S. Army.

POSTED

DEADLINE

Stone crusherThe contract is for a single Hog Crusher, a skid steer-mounted concrete crusher designed to reduce material to an inch or smaller with a discharge rate of up to 10 tons per hour. The equipment features heavy plate reinforced construction for durability and includes a one-half yard hopper capacity to handle significant volumes efficiently. The solicitation, designated W911S226U3705, is a combined acquisition under the North American Industry Classification System code 333120, specifically set aside entirely for small businesses as defined by the SBA. It was posted on July 16, 2026, with a response deadline of July 24, 2026, at 3:55 a.m. The contracting activity originates from the Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, and performance is expected to occur at a location with a zip code of 22211. Primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or phone at 7036140476.

POSTED

DEADLINE

SET-ASIDE ISBEE Bobcat (Brand Name or Equal) Skid SteerThis solicitation is a restricted opportunity for Indian Small Business Economic Enterprise (ISBEE) concerns, specifically for the purchase of one Bobcat (Brand Name or Equal) Skid Steer. The acquisition is set aside exclusively for ISBEE small businesses as defined by the Department of the Interior and Indian Health Services, with the North American Industry Classification System code 333120. All potential offerors must be currently registered and active in the System for Award Management (SAM) at the time of submission. The government will award the contract to the responsible offeror with the lowest price that meets the technically acceptable requirements, and all quotes must remain valid for 90 days after the submission deadline. The item must be delivered to 669 Agency Main St., Harlem, MT 59526. Quotes must be submitted via email to mitzi.horn@ihs.gov no later than July 27th, 2026, at 1:00 pm MDT, with the solicitation number in the subject line to ensure proper tracking. Technical questions must be directed to the same email address no later than July 20th, 2026, at 5:00 pm MDT, also including the solicitation number in the subject line. The requirement is detailed in supporting attachments including the Statement of Work, Specifications, and the original RFQ document. Award notification will be published publicly through SAM.gov. Failure to comply with any terms, including submission format, deadline, or inclusion of required documentation, may result in rejection of the offer.

Billings Area Indian Health Svc

POSTED

DEADLINE

Ground TamperThe contract is for the procurement of ten Wacker Neuson BS62-4Ab vibratory rammers, each equipped with an 11-inch plastic shoe and a Honda engine, intended for ground compaction tasks. The solicitation number is W911S226U3706, titled Ground Tamper, and was posted on July 16, 2026, with a response deadline of July 24, 2026, at 3:55 AM Eastern Time. This is a combined solicitation under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses are eligible to bid. The North American Industry Classification System code is 333120, classifying the contract within the construction machinery manufacturing sector. The issuing agency is the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York, with a performance location listed as 22211. The primary point of contact for inquiries is Anthony Zyla, reachable via email at anthony.j.zyla.civ@army.mil or by phone at 703-614-0476. Bidders must comply with all federal contracting standards and submit proposals through the SAM.gov platform prior to the deadline.

POSTED

DEADLINE

ExcavatorThe contract titled Excavator is issued under solicitation number W911S26U3726 by the Department of Defense through its office at Fort Drum, New York, with a primary point of contact being John AUER, reachable via phone at 7065056399 or email at john.c.auer.civ@army.mil. It is a combined solicitation with a total small business set-aside designation under the SBA, meaning only small businesses qualifying under NAICS code 333120 are eligible to respond. The opportunity was posted on July 16, 2026, with a firm response deadline of July 20, 2026, at 8:20 PM Eastern Time. The place of performance is specified as a ZIP code of 31904, though the exact city and state are not provided, suggesting delivery or service may be required in a location associated with that area. The contract is managed by the W6QM Micc-Ft Drum office, and all proposals must comply with the Federal Acquisition Regulation governing small business set-asides.

W6QM Micc-Ft Drum

POSTED

3 days ago

DEADLINE

in about 21 hours

AI Contract Overview

The contract seeks the supply and delivery of a small excavator under solicitation number BC228884, issued by the Bowen Island Municipality with oversight from the Government of Canada. The request was posted on BC Bid on May 4, 2026, with a mandatory response deadline of July 1, 2026. The procurement falls under NAICS code 333120, indicating it pertains to the manufacture of construction and mining machinery. Bidders must submit their quotations by the stated deadline to be considered, and all deliveries are expected to fulfill the requirements specified in the tender. The primary point of contact for inquiries is Rachel Pryce-Jones, Contracting Authority, reachable via email at publicworks@bimbc.ca. The place of performance and other location details are not specified, suggesting delivery may be to a location determined by the municipality. This solicitation is open to federal procurement channels and does not designate a specific set-aside category for small businesses or other designated groups.

General Info

Supply and delivery of a small excavator for Bowen Island Municipality, responses due June 8, 2026.

Agency

Government of Canada → Bowen Island MunicipalityView Agency

NAICS

333120 - Construction Machinery ManufacturingView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 4

Solicitation

Response DeadlineJul 1

Deadline has passed

Submission Closed

07/01/2026, 01:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Bowen Island Municipality

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Bowen Island Municipality

View Agency Profile

Office AddressN/A

Contacts

Rachel Pryce-JonesContracting Authority

contact@example.gov

Full Description

May 5, 2026 - Request for Quoatation posted on BC Bid.