Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from National Aeronautics And Space Administration was posted on May 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Supply and Delivery of Teledyne Isco Signature LaserFlow System

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

AI Contract Overview

Show more

The contract requests the procurement and delivery of a brand-name Teledyne Isco Signature LaserFlow System for installation at Outfall 001 in Cleveland, Ohio, with the specific requirement that the equipment must accurately measure low-flow conditions of less than one inch of water level. This is a sole-source acquisition that mandates the vendor hold authorized reseller status for Teledyne Isco products, ensuring authenticity and compliance with manufacturer specifications. The system must be fully functional upon delivery and prepared for immediate installation at the designated site. This subcontract is designated as a Total Small Business Set-Aside under the SBA program, with a NAICS code of 334516, indicating it is reserved exclusively for small business concerns. The solicitation was posted on May 1, 2026, with a response deadline of May 7, 2026, at 12:00 PM. The contracting agency is the NASA Shared Services Center, operating under the National Aeronautics and Space Administration, and the place of performance is clearly identified with a zip code of 44135 in Cleveland, Ohio. All technical, logistical, and compliance requirements must be met to qualify for award under this small business set-aside solicitation.

General Info

Procurement of sole-source Teledyne Isco Signature LaserFlow system for low-flow measurement in Cleveland.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

Cleveland, OH, 44135, USA

Set-Aside

SBA

Documents

This scope was carved out of 80NSSC26932036Q.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Purchase flow meter for permitted outfall

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyNational Aeronautics And Space Administration → NASA Shared Services Center
ContactsNo contacts available
OfficeN/A
Organization / Agency
National Aeronautics And Space Administration → NASA Shared Services Center
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Procure and deliver a brand-name Teledyne Isco Signature LaserFlow System for installation at Outfall 001 in Cleveland, OH, capable of measuring low-flow conditions (<1 inch water level). This is a sole-source, brand-name procurement requiring authorized reseller status.

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

NAICS: 541620
New
Federal
Virginia Department of Environmental Quality (VDEQ) Technical Review and Regulatory Oversight of the WFF FUDS Program
Solicitation # 80NSSC26944663Q
NASA Shared Services Center intends to award a sole source contract to the Virginia Department of Environmental Quality for technical review and regulatory oversight of the Formerly Used Defense Sites program at Wallops Flight Facility. This procurement, categorized under NAICS code 541620, follows FAR Part 12 for commercial items and services. The period of performance is scheduled from October 1, 2026, through September 30, 2027, with performance located at the NASA Glenn Research Center and within Virginia. The scope of work involves providing technical support and state regulatory oversight to ensure compliance with Commonwealth of Virginia Law and federal requirements. Key responsibilities include conducting technical reviews and providing recommendations on documents, identifying Applicable or Relevant and Appropriate Requirements, performing site visits to verify consistency with state requirements, and supporting public education and participation activities. Specific deliverables include reviews for the Visitor Center/Boat Basin, Skeet Range, Main Base Areas of Interest, and the Construction Debris Landfill. While the government intends to proceed with a sole source award under FAR 12.102(a), it is requesting capability statements by September 16, 2026, to determine if the procurement should be conducted on a competitive basis.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 513210
New
Federal
Tektronix MSO64B Oscilloscope
Solicitation # 80NSSC26942755Q-1
Solicitation 80NSSC26942755Q-1 is a brand-name request for quotation issued by the NASA Shared Services Center for the procurement of a Tektronix MSO64B Mixed Signal Oscilloscope for the NASA Glenn Research Center in Cleveland, Ohio. This firm-fixed-price contract is set aside for small businesses and will be awarded based on the lowest price technically acceptable (LPTA) offer. The required equipment must include four FlexChannels with 62.5M record length, a 1 GHz bandwidth option, a removable SSD with Windows 10 IoT Enterprise LTSC 2021 license, a North America power cord, a hard transit case, and a rackmount kit. Additionally, the supplier must provide a one-year warranty and an accredited calibration report with a certificate of traceable calibration standard. The period of performance for delivery is 6 to 12 weeks after receipt of order, with shipping terms specified as FOB Destination. To be considered for award, offerors must be registered in the System for Award Management, provide their CAGE code, and submit two points of contact. A critical requirement for all vendors is the provision of proof of pricing from the manufacturer and confirmation of authorization to resell the specified items. Quotes must be submitted via email to Cara Craft by September 16, 2026, at 1 p.m. CT. The procurement incorporates various FAR and NASA-specific clauses, including those regarding personal identity verification, export licenses, and duty-free entry for supplies.
Software Publishers

POSTED

1 day ago

DEADLINE

in 4 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS