Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Supply, delivery, installation and commissioning of 1 unit of Regenerative AC grid simulator to School of EEE, Nanyang Technological University

Open
Doc5970341412International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nanyang Technological University is seeking proposals for the supply, delivery, installation, and commissioning of one Regenerative AC grid simulator for the School of EEE in Singapore. Interested parties must submit their entire response through the designated sourcing event by the deadline of November 17, 2026. Bidders are advised to download the specification documents via the Response to posting section to identify the primary contact person and any required site briefings. Strict submission protocols are in place, and any proposals sent through unauthorized channels, such as Ariba discovery Q&A or event messages, may lead to disqualification. It is critical that bidders select the correct currency before submission, as it cannot be changed afterward. Additionally, the default opportunity amount of 500 USD shown in the system should be ignored.

General Info

NTU seeks proposals for a Regenerative AC grid simulator by November 17, 2026.

Agency

Nanyang Technological University

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

SGP

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyNanyang Technological University
Contacts1 person available
OfficeN/A
Organization / AgencyNanyang Technological University
Office AddressN/A
Contacts
contact@example.gov

Full Description

Show more
CLARIFICATIONS OF PURCHASE Please do not post your clarifications through other channels, such as Ariba discovery Q&A or event messages. SUBMISSION REQUIREMENT Please click on “Response to posting” and download the specification document(s) in the sourcing event for more information on contact person and site briefing (if any). All proposals must be submitted through the sourcing event by clicking ‘submit entire response’. Any proposal submitted through other channels, such as Ariba discovery Q&A or event messages, etc. will result in disqualification at the discretion of NTU. Training guide on how to submit your bid is available on NTU website: https://www.ntu.edu.sg/collaborate-with-us/information-for-suppliers/supplier-user-guide-for-ariba IMPORTANT NOTES 1. You cannot change the currency once you have submitted your bid. 2. Kindly ignore the opportunity amount as shown above which has been defaulted to USD 500.

Similar Contracts

Same NAICS industry code

NAICS: 334515
New
Federal
WY Fremont Canyon PLC's
Bureau of Reclamation

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334515
New
Federal
WY AO Omicron Calibration
Bureau of Reclamation

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 334515
New
DIBBS
Electro-Optical Infrared (EO/IR) Sensor System SupplyThis subcontract involves the manufacture and supply of seven Electro-Optical Infrared Sensor Systems, identified by NSN 5895016706768, to support prime contractors under DLA Weapons Support contracts. The selected provider is responsible for producing the systems according to strict technical specifications, which includes the procurement of necessary sensing components and the use of specialized testing equipment. Performance is centered in New Cumberland, Pennsylvania, under the oversight of the Department of Defense. Key deliverables include the seven sensor units and a comprehensive First Article Testing report as specified in CLIN 0002. The contractor must ensure full compliance with MIL-STD-191 for sampling, MIL-STD 129 for packaging and marking, and RP001 standards. The procurement process is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Division under NAICS code 334515.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
Supply and Manufacture of Electrical Power Cable AssembliesThis subcontract involves the supply and manufacture of seven specialized electrical power cable assemblies for prime contractors supporting the Defense Logistics Agency Weapons Support ASC Commodities Division. The contractor is responsible for fabricating the assemblies according to NSN 5995011823739, conducting continuity testing to verify electrical integrity, and ensuring all markings and labels adhere to MIL-STD-129 standards. The project falls under NAICS code 334515 and requires strict adherence to ITAR or EAR export control compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
Non-Medical Oxygen Analyzer Sensor (NSN 6630-01-659-1367)This subcontract involves the provision of non-medical oxygen analyzer sensors, identified by NSN 6630-01-659-1367, to support prime contractors for the Department of Defense Medical Supply Chain. The sensors must be delivered fully assembled and tested, featuring wall mount brackets, 3-inch electric cables, and the ability to handle inlet gas pressures between 1.0 and 30 PSIG. Technical specifications require an operating temperature range of 0 to 130 degrees Fahrenheit and an ambient self-calibration period of 3 to 5 minutes. The contract is managed under NAICS code 334515 and requires strict adherence to DFARS 252.204-7012 and ASTM D3951 packaging standards. Performance for this requirement is centered at Columbus Air Force Base. Interested parties should note the posting date of November 6, 2026, with a response deadline set for November 12, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
DIBBS
Pressure Transmitter Manufacturer/SupplierThis subcontract involves the manufacture or sourcing of 165 pressure transmitter units, specifically NSN 6620016787678, to support prime contractors on Department of Defense procurement projects. Managed by the DLA Weapons Support Land Supply Chain, the contract requires the supplier to certify the domestic origin of the hardware and ensure all deliveries are made to a government-arranged transportation point in accordance with First Destination Transportation requirements. The supplier must strictly adhere to DFARS 252.204-7012 regulations regarding the safeguarding of covered defense information. Performance of the contract is centered in New Cumberland, Pennsylvania, under NAICS code 334515. Interested parties must have submitted responses by the deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334515
New
DIBBS
METER, SPECIAL SCALE
Solicitation # SPE7M1-27-T-2245
Solicitation SPE7M1-27-T-2245 is a fixed-price, small business set-aside contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of three special scale meters (NSN 6625-01-337-7421). The items are classified as commercial off-the-shelf products, and because no technical data is currently available, any alternate offeror must provide a complete data package for evaluation. Delivery is required within 168 days after award, with the place of performance located in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically RP001, and requires all packaging to be marked and labeled per MIL-STD-129. Non-hazardous materials must follow ASTM D3951, though DLA Master List requirements take precedence. Inspection and acceptance will occur at the destination under FAR 52.246-1. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for electronic invoicing and compliance with DFARS regulations regarding the Buy American Act, covered defense telecommunications equipment, and cybersecurity reporting. Quotations must be submitted via the DIBBS portal by November 16, 2026.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334515
New
DIBBS
METER, ELECTRICAL FREQU
Solicitation # SPE7M1-27-T-2302
This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of 12 electrical frequency meters under NSN 6625015007981. The contract is a HUBZone set-aside with a delivery requirement of 168 days after order. Delivery is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The procurement includes strict technical and quality requirements, specifically prohibiting the intentional addition of mercury except for functional use in specified components. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with a mandatory special marking for delicate instruments. The contract incorporates various FAR and DFARS clauses covering simplified acquisitions, hazardous material identification, and cybersecurity reporting. Invoicing and payment processing must be managed through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334515
New
DIBBS
AMMETER
Solicitation # SPE7M1-27-T-2251
Solicitation SPE7M1-27-T-2251 is a Request for Quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of three ammeters (NSN 6625012666031). The items are designated as critical application items and must be delivered within 168 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The procurement is managed under the First Destination Transportation program to optimize shipping costs. Technical requirements mandate Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003, with packaging and marking governed by MIL-STD-2073-1E and MIL-STD-129. The contract includes strict prohibitions against the intentional addition of mercury, except for functional uses in batteries or sensors, and requires compliance with hazardous material labeling standards. Legal and regulatory frameworks include the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements. Payment processing must be conducted electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334515
New
DIBBS
TEST FIXTURE
Solicitation # SPE7M1-27-T-1632
Solicitation SPE7M1-27-T-1632 is a small business set-aside request for quotation issued by the DLA Weapons Support Maritime Supply Chain for the procurement of one test fixture, identified by NSN 6625-01-126-4886. The required delivery date is June 19, 2027, with a delivery timeframe of 224 days after order. The item is to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination per FAR 52.246-2. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standards MIL-STD-129. Technical and quality requirements are governed by the DLA Master List under RA001. Special safety provisions prohibit the intentional addition of mercury, except in specific functional components, and require compliance with hazard communication standards for any hazardous materials. Offerors must submit quotes via the DIBBS system and ensure all representations and certifications are current in the System for Award Management. Payment will be processed electronically through the Wide Area Workflow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334515
New
DIBBS
PARTS KIT, ELECTRONIC E
Solicitation # SPE7M1-27-T-2323
This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is for the procurement of 34 electronic equipment parts kits under NSN 6625-01-555-5529. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a delivery timeline of 168 days after award and a required delivery date of May 7, 2027. Inspection and acceptance are designated as destination-based, and the contract is established as a fixed-price acquisition with FOB Destination Other terms. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1 Appendix D for kits, MIL-STD-129 for marking, and RP001 for palletization. A critical safety requirement prohibits the intentional addition of mercury or mercury-containing compounds to hardware, with limited exceptions for specific functional components. Additionally, the contract incorporates comprehensive federal and defense regulations, including DFARS requirements for cybersecurity safeguarding, the Buy American and Balance of Payments Program, and prohibitions on covered defense telecommunications equipment. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334515
New
DIBBS
ANALYZER, BLOOD GLUCOSE
Solicitation # SPE2DH-27-T-0448
Solicitation SPE2DH-27-T-0448, issued by the DLA Troop Support Medical Supply Chain, is for the procurement of two Prodigy Pocket Meter Kits (NSN 6630-01-690-1933). These blood glucose analyzers are small, lightweight, no-coding devices that power on automatically upon test strip insertion, providing accurate results in seven seconds and featuring a 120-test memory with date and time tracking. The items must have a non-extendable shelf life of 36 months and are subject to destination inspection and acceptance. The contractor must adhere to strict commercial packaging and marking standards, specifically Medical Marking Standard No. 1, which supersedes MIL-STD-129. All shipments must be processed via the Wide Area WorkFlow system for payment and receiving reports. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment. All quotes must be submitted through the DLA Internet Bid Board System, and the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Nanyang Technological University

Same awarding agency

NAICS: 337214
New
International
Supply and Install 6 units of Workstations for ARC TR+41
Solicitation # Doc5972260098
Nanyang Technological University is seeking proposals for the supply and installation of six workstations for ARC TR+41 in Singapore. Interested parties must download the specification documents via the sourcing event to obtain details regarding the contact person and any necessary site briefings. The submission deadline for this sources-sought opportunity is November 17, 2026, at 15:59. All proposals must be submitted exclusively through the sourcing event by selecting submit entire response, as submissions via other channels may lead to disqualification. Bidders should be aware that the currency cannot be changed after submission and should disregard the default opportunity amount of 500 USD. For further assistance, a training guide is available on the university website.
Office Furniture (except Wood) Manufacturing

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 423430
New
International
Invitation to Quotation for BeyondTrust Remote Support Concurrent User Subscription On Premise at Nanyang Technological University for a Period of 3 Years
Solicitation # Doc5970093269
Nanyang Technological University is seeking quotations for a three year subscription of BeyondTrust Remote Support Concurrent User On Premise software. Interested parties must submit their proposals through the designated sourcing event by November 17, 2026. All bids must be finalized using the submit entire response function, as submissions via other channels such as Ariba discovery Q&A or event messages may lead to disqualification. Suppliers should download the specification documents via the response to posting section for details regarding site briefings and contact persons. It is critical that bidders select the correct currency before submission, as it cannot be changed afterward. Additionally, the default opportunity amount of 500 USD shown in the system should be ignored.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 236220
New
International
Proposed Renovation Works to Project Lab at S2-B4a-01 & 02 for School of Electrical and Electronic Engineering (EEE), Nanyang Technological University
Solicitation # Doc5966659176
Nanyang Technological University is seeking proposals for renovation works to the Project Lab at S2-B4a-01 and 02 for the School of Electrical and Electronic Engineering. Interested parties must download the specification documents from the sourcing event to obtain details regarding the contact person and any potential site briefings. The submission deadline for this project is November 30, 2026, at 15:59. All proposals must be submitted exclusively through the sourcing event by selecting submit entire response, as submissions via other channels may lead to disqualification. Bidders should be aware that the currency cannot be changed after submission and should disregard the default opportunity amount of 500 USD. For further assistance, a training guide is available on the university website.
Commercial and Institutional Building Construction

POSTED

5 days ago

DEADLINE

in 23 days
View Details
NAICS: 423410
New
International
Supply of E-mount professional full-frame digital cinema camera package and Accessories for Nanyang Technological University
Solicitation # Doc5966544995
Nanyang Technological University is seeking proposals for the supply of an E-mount professional full-frame digital cinema camera package and associated accessories. Interested suppliers must submit their entire response exclusively through the designated sourcing event portal by the deadline of November 13, 2026. Any submissions made via alternative channels, including Ariba discovery Q&A or event messages, may lead to disqualification. Suppliers are advised to download the specification documents within the sourcing event for details regarding the contact person and potential site briefings. It is critical to ensure the correct currency is selected before submission, as it cannot be changed afterward. Additionally, bidders should disregard the default opportunity amount of 500 USD listed in the system.
Photographic Equipment and Supplies Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 513210
New
International
Privilege Access Management (PAM) System - One (1) year subscription license, with an option to renew annually for an additional two (2) years
Solicitation # Doc5966211624
Nanyang Technological University is seeking proposals for a Privilege Access Management (PAM) System, which includes an initial one year subscription license with an option to renew annually for up to two additional years. This sources sought opportunity, identified by solicitation number Doc5966211624, requires all bids to be submitted through the official sourcing event by November 13, 2026. Suppliers must strictly adhere to the submission process by clicking submit entire response, as any proposals sent via Ariba discovery Q&A or event messages may lead to disqualification. It is critical that bidders select the correct currency before submission, as it cannot be changed afterward. Additionally, the default opportunity amount of 500 USD should be ignored. Detailed specifications and contact information are available within the sourcing event documents.
Software Publishers

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
International
Supply, deliver, install, commission, and provide training for Ion Chromatography to Nanyang Technological University of Singapore (NTU), the School of Chemistry, Chemical Engineering and Biotechnology - Chemistry Teaching Lab
Solicitation # Doc5966328171
Nanyang Technological University is seeking proposals for the supply, delivery, installation, commissioning, and training for Ion Chromatography at the School of Chemistry, Chemical Engineering and Biotechnology Chemistry Teaching Lab in Singapore. Interested parties must submit their entire response through the designated sourcing event by the deadline of November 13, 2026. All proposals submitted via alternative channels, including Ariba discovery Q&A or event messages, may result in disqualification. Bidders should refer to the specification documents for contact details and site briefing information, noting that the currency cannot be changed after submission and the default opportunity amount of 500 USD should be ignored.
Analytical Laboratory Instrument Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 334519
New
International
Provision of Four-Channel Distributed Fibre-Optic Strain and Temperature Sensing System to School of Civil and Environmental Engineering
Solicitation # Doc5966328113
Nanyang Technological University is seeking proposals for the provision of a Four-Channel Distributed Fibre-Optic Strain and Temperature Sensing System for the School of Civil and Environmental Engineering. Interested parties must download the specification documents via the sourcing event to identify the primary contact person and details regarding potential site briefings. The submission deadline for this opportunity is November 13, 2026, at 15:59. All proposals must be submitted exclusively through the sourcing event by selecting the submit entire response option, as submissions via other channels may lead to disqualification. Bidders should be aware that the currency cannot be changed after submission and should disregard the default opportunity amount of 500 USD. For further guidance, suppliers are encouraged to refer to the training materials available on the university website.
Other Measuring and Controlling Device Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
International
Supply, delivery, installation and commissioning of 6 units of Laboratory Torsion Equipment
Solicitation # Doc5965263504
Nanyang Technological University is seeking proposals for the supply, delivery, installation, and commissioning of six units of Laboratory Torsion Equipment. Interested parties must download the specification documents via the sourcing event to identify the primary contact person and determine if a site briefing is required. All bids must be submitted formally through the sourcing event by selecting submit entire response, as submissions via Ariba discovery Q&A or event messages may lead to disqualification. The deadline for responses is November 12, 2026, at 15:59. Bidders should be aware that the currency cannot be changed once the bid is submitted and should disregard the default opportunity amount of 500 USD. For further guidance on the submission process, a training guide is available on the NTU website.
Analytical Laboratory Instrument Manufacturing

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 333242
New
International
Supply, Delivery, Installation and Commissioning of One Set Semi-automatic Die Attach Bonder complete with accessories to the SHINE Center, Nanyang Technological University
Solicitation # Doc5964872740
Nanyang Technological University is seeking proposals for the supply, delivery, installation, and commissioning of one set of semi-automatic die attach bonder and its associated accessories for the SHINE Center in Singapore. Interested parties must download the specification documents via the sourcing event to identify the primary contact person and determine if a site briefing is required. The submission deadline for this opportunity is November 12, 2026, at 15:59. All proposals must be submitted exclusively through the sourcing event by selecting submit entire response, as submissions via Ariba discovery Q&A or event messages may lead to disqualification. Bidders should be aware that the currency cannot be changed after the bid is submitted and should disregard the default opportunity amount of 500 USD. All clarifications must be handled through the official channels specified in the sourcing event.
Semiconductor Machinery Manufacturing

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 711320
New
International
Supply of Web Platform and Project Management Services for Virtual and Physical Running and Cycling Events, Nanyang Technological University
Solicitation # Doc5959234250
Nanyang Technological University is seeking proposals for the supply of a web platform and project management services to support both virtual and physical running and cycling events in Singapore. Interested parties must download the specification documents via the sourcing event to identify the primary contact person and details regarding any necessary site briefings. All bids must be submitted exclusively through the sourcing event by selecting the submit entire response option, as submissions via Ariba discovery Q&A or event messages may lead to disqualification. The deadline for responses is November 11, 2026, at 15:59. Bidders should be aware that the currency cannot be changed after submission and should disregard the default opportunity amount of 500 USD.
Promoters of Performing Arts, Sports, and Similar Events without Facilities

POSTED

6 days ago

DEADLINE

in 4 days
View Details
NAICS: 334413
New
International
ITQ-PR758947-WEN-NCAIP-2026_WP4.1 - III-V Epitaxial-Wafers
Solicitation # Doc5959998069
Nanyang Technological University is soliciting proposals for ITQ-PR758947-WEN-NCAIP-2026_WP4.1 regarding III-V Epitaxial-Wafers. The solicitation, identified by number Doc5959998069, was posted on November 2, 2026, with a strict response deadline of November 12, 2026, at 15:59. The place of performance for this contract is Singapore. All proposals must be submitted exclusively through the sourcing event by selecting submit entire response to avoid disqualification. Bidders are cautioned that the currency cannot be changed after submission and should disregard the default opportunity amount of 500 USD. Clarifications must not be sent through Ariba discovery Q&A or event messages, and further details regarding contact persons and site briefings can be found in the specification documents.
Semiconductor and Related Device Manufacturing

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 561612
International
ITQ-PR759741-WEN-CITS-2026_Provision of Augmented Security Resource Service
Solicitation # Doc5957798247
Nanyang Technological University is soliciting proposals for the Provision of Augmented Security Resource Service under solicitation number Doc5957798247. Interested parties must submit their entire response through the designated sourcing event by the deadline of November 11, 2026, at 15:59. Proposals submitted via other channels, including Ariba discovery Q&A or event messages, may lead to disqualification. Suppliers should download the specification documents via the Response to posting section for details regarding site briefings and contact persons. It is critical to ensure the correct currency is selected before submission, as it cannot be changed afterward. Additionally, bidders should disregard the default opportunity amount of 500 USD shown in the system.
Security Guards and Patrol Services

POSTED

9 days ago

DEADLINE

in 4 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS