Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of 4130 Chromoly Steel Flat Bars

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 4130 Chromoly steel flat bars to prime contractors supporting DLA Troop Support supply contracts for the Department of Defense. The required material must be cold drawn and normalized steel that adheres to NSN 9510006404974 specifications. The scope of work includes cutting the steel to a thickness of 1.000 inch and a width of 2.000 inches, with lengths provided in whole feet between 10 and 12 feet. A total of 52.000 linear feet of finished steel bars are to be delivered to the designated DLA location at Tinker AFB. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. This procurement falls under NAICS code 423510 and is managed through Depot Oklahoma.

General Info

Supply 52 linear feet of 4130 Chromoly steel flat bars to Tinker AFB.

Agency

Department Of Defense → DEPOT OKLAHOMA

NAICS

423510 - Metal Service Centers and Other Metal Merchant Wholesalers

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0211.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DEPOT OKLAHOMA

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DEPOT OKLAHOMA

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 4130 Chromoly steel flat bars for prime contractors delivering DLA Troop Support supply contracts. Sources cold drawn and normalized steel meeting NSN 9510006404974 specifications. Cuts material to 1.000 inch thickness, 2.000 inch width, and whole feet lengths between 10 and 12 feet. Delivers 52.000 linear feet of finished steel bars to the designated DLA location.

Similar Contracts

Same NAICS industry code

Reinforcing Steel (Rebar) SupplierThis subcontract agreement establishes a partnership for the supply of reinforcing steel bars to prime contractors working on State of New Hampshire Department of Administrative Services procurement projects. The selected supplier is responsible for delivering 126,000 lbs of new #3, #4, and #5 rebar that adheres to all specified dimensions and weights directly to the designated agency sites. To qualify for this contract, the supplier must provide a Certificate of Good Standing from the New Hampshire Secretary of State and maintain valid workers compensation insurance. The procurement is managed by Das Purchasing for the state of New Hampshire, with a response deadline set for December 2, 2026.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 3 hours ago

DEADLINE

Reinforcing Bars Straight - Grade 60 AASHTO M31 - Uncoated

Solicitation # 3159-27

Solicitation 3159-27 is a request for bids from the New Hampshire Department of Administrative Services for the supply of straight, uncoated reinforcing bars meeting Grade 60 AASHTO M31 standards. The scope includes various bar sizes from #3 to #9 in 20-foot lengths, with estimated annual quantities ranging from 4,000 to 100,000 lbs per item. The contract is awarded to one or more vendors providing the lowest cost by section, provided they bid on all items within that section. The term begins upon approval by the Governor and Executive Council and runs through January 31, 2032, with a possible two-year extension. Deliveries must be completed within five business days of an order and delivered to state loading docks between 8:00 A.M. and 4:00 P.M. on business days. Vendors are responsible for removing products from the carrier and must adhere to industry standards for packaging and palletization, including the removal of empty pallets on the next scheduled delivery. Required documentation includes detailed delivery tickets and material safety data sheets per RSA 277-A. To be eligible, vendors must provide proof of comprehensive general liability insurance, workers compensation insurance, and a certificate of good standing from the NH Secretary of State. Bids must be submitted via email to [email hidden] by December 2, 2026, at 1:00 P.M. Eastern Time.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 3 hours ago

DEADLINE

Signposts and Anchor Base SupplyThis subcontract agreement focuses on the supply of structural mounting hardware, specifically signposts and anchor bases, for prime contractors working on Ada County Highway District projects. The selected provider is responsible for ensuring all materials adhere strictly to ACHD specifications and standard drawings, with the final delivery of physical components to designated ACHD facilities. Managed by the Traffic Operations agency in Idaho, the contract falls under NAICS code 423510. The solicitation was posted on November 3, 2026, with a response deadline set for November 18, 2026.

Traffic Operations

POSTED

about 6 hours ago

DEADLINE

Corrosion-Resistant Cold Rolled Metal Sheet SupplierThis subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the supply of 22 corrosion-resistant cold rolled and solution heat-treated metal sheets. The materials must meet NSN 9515002357608 specifications, measuring 0.025 inches by 36 inches by 120 inches in accordance with SAE AMS2807C Revision C. Delivery is designated as FOB Origin with the place of performance located at Tinker AFB. The supplier must adhere to strict quality and logistical standards, including marking and packaging requirements per MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Additionally, the contractor is required to maintain a QSLD listing and provide a Certificate of Quality Compliance. The response deadline for this opportunity is November 16, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Paving Aggregate SupplyThis subcontract opportunity, managed by the Fws Contracting Activity under the Department of the Interior, involves the supply and delivery of paving aggregates for prime contractors working on U.S. Fish and Wildlife Service facility projects. The selected provider must ensure all materials adhere to Section 32 15 00 specifications and comply with Buy American construction material requirements. Additionally, the contractor is responsible for providing manufacturer material certificates for all aggregates delivered to the project sites. This is a total Small Business Set Aside under NAICS code 423510. The solicitation was posted on November 3, 2026, with a response deadline of November 23, 2026, at 5:00 PM.

Fws Contracting Activity

POSTED

about 11 hours ago

DEADLINE

Welding Materials and Metal Stock SupplierThis subcontract for Welding Materials and Metal Stock Supplier involves the provision of raw metals and consumables to prime contractors operating on BWI Thurgood Marshall Airport Administration projects. The scope of supply includes structural steel, aluminum, sheet metal, electrodes, shielding gas, and filler rods. To support project timelines, the supplier must ensure rapid delivery to the BWI campus to meet a strict one-business-day start requirement. The supplier is responsible for delivering all raw materials and consumables directly to the job site. Additionally, the contract mandates the provision of material certifications and Mill Test Reports for all structural work to ensure quality and compliance. This opportunity is categorized under NAICS code 423510 and is managed through the state of Maryland.

POSTED

DEADLINE

Supplier of Copper Alloy 360 Metal BarThis subcontract, issued by the Department of Defense through the Cherry Point Phantom RD building, requires the supply of 188 feet of Copper Alloy 360 metal bar to support prime contractors delivering DLA supply contracts. The material must be round, half-hard temper, with a 0.500 inch diameter and provided in lengths of 10 to 12 feet. All supplies must strictly adhere to ASTM B16/B16M-19 and SAE AMS-STD-185A standards. Compliance requirements include a QSLD listing and specific marking protocols according to MIL-STD-129 and MIL-STD-2073-1E. The successful supplier must provide certified material accompanied by Mill-Material Certification and DD Form 1423s. The performance location for this contract is Cherry Point, zip code 28533-5040, with a response deadline set for November 13, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Supplier of Wrought Round Copper Alloy 510 Metal BarThis subcontract, issued by the Department of Defense through the DDSP New Cumberland Facility, requires the supply of 53 linear feet of wrought round Copper Alloy 510 metal bar. The material must be provided in 2.000-inch diameter bars with lengths ranging from 10 to 12 feet, adhering strictly to ASTM B139/B139M-12 and QAP 13873 standards. The selected supplier must maintain a QSLD listing and provide Mill-Material Certification for all delivered goods. Additionally, the contract mandates specific identification markings via stamping or stenciling and requires packaging to be completed in accordance with ASTM B900 and MIL-STD-2073-1E. Performance will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supplier of Certified Aerospace Grade Alloy/Steel for Shear BoltsThis subcontract involves the supply of certified aerospace grade alloy and steel bar stock specifically for the production of shear bolts. The materials must strictly adhere to the chemical and physical properties outlined in NAS1223-1235 standards to support prime contractors delivering commodities to the DLA Weapons Support ASC Commodities Division of the Department of Defense. The selected supplier is responsible for delivering certified raw material stock directly to the manufacturer while ensuring full material traceability. Compliance with specific aerospace alloy requirements must be verified through the provision of detailed mill test reports. Performance for this contract is centered in Huntsville, Alabama.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Steel Comp 4130 Cold Drawn Square BarThis subcontract involves the supply of specialized Steel Comp 4130 Cold Drawn, Normalized square bars for prime contractors working on Department of Defense projects under DLA Troop Support Construction and Equipment. The specific requirements call for bars with a 1.000 inch width across flats in lengths of 10 to 12 feet, totaling 119 feet of material. All steel must be of domestic origin and feature continuous identification marking via stamping or stenciling in accordance with ASTM A700 standards. The project is associated with the Cherry Point Phantom Rd Building and will be performed in Cherry Point, North Carolina. Interested parties must adhere to the response deadline of November 13, 2026. The procurement falls under NAICS code 423510 and is managed through the Department of Defense.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Supply of Certified Aerospace AlloysThis subcontract involves the supply of certified aerospace alloys to prime contractors supporting DLA Weapons Support projects. The scope of work requires the sourcing and delivery of raw material stock that strictly adheres to AMS 6345 and AMS-S-6758 specifications. To ensure quality and compliance, the provider must maintain full material traceability and provide certifications of conformance along with detailed Mill Test Reports for all delivered materials. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract is categorized under NAICS code 423510. Performance for this requirement is centered at Tinker AFB. Interested parties should note the response deadline of November 10, 2026, to submit their proposals for this specialized material supply effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Cold Rolled Flat Steel Bars (1045 Steel)This subcontract involves the supply of cold rolled flat steel bars specifically composed of Steel Comp 1045 for prime contractors supporting DLA Troop Support contracts. The required material must adhere to precise dimensions of 0.250 inches in thickness and 4.000 inches in width, with lengths ranging between 10 and 12 feet. All materials must be certified to Steel Comp 1045 specifications and delivered to designated government locations. The project is managed under the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. All shipments must be packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement. The solicitation was posted on November 2, 2026, with a response deadline of November 13, 2026, falling under NAICS code 423510.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DEPOT OKLAHOMA

Same awarding agency

Supply of Annealed 4130 Alloy Steel Round BarThis subcontract involves the supply of annealed 4130 alloy steel round bars to prime contractors supporting DLA Troop Support Construction and Equipment contracts. The requirement specifies 3.000-inch diameter bars in lengths ranging from 6 to 20 feet, with a total delivery of 51.000 feet of certified material. All supplies must meet NSN 9510005297315 specifications and include legible stamping or stenciling of dimensions, heat or lot numbers, and contract numbers. Managed by the Department of Defense through Depot Oklahoma, the performance of this contract is located at Tinker AFB. The opportunity is categorized under NAICS code 332311, with a response deadline set for November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Specialized Plastic Sheets (NSN 9330014629630)This subcontract involves the manufacture and supply of 23 specialized plastic sheets for prime contractors supporting Boeing and Northrop Grumman under DLA supply contracts. The materials must be produced according to NSN 9330014629630 and P/N L3223886-023 specifications to ensure suitability for critical aerospace applications. A mandatory First Article Test must be performed and documented via a successful report to validate the material quality. The project is managed by the Department of Defense through Depot Oklahoma, with performance taking place at Tinker AFB. Due to the nature of the work, the contractor is required to maintain NIST SP 800-171 compliance to ensure the protection of Controlled Unclassified Information. Final deliverables consist of the 23 plastic sheets and the completed FAT report.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Steel Comp 630 Metal Bar (Hot Rolled, Centerless Ground)This subcontract involves the procurement of 43 feet of Steel Comp 630 metal bar to support prime contractors fulfilling DLA supply contracts for the Department of Defense at Tinker AFB. The material must be hot rolled and centerless ground to a 4.000-inch diameter in strict accordance with SAE AMS5643W Revision W. To be eligible, providers must maintain a QSLD listing for FSGs 95 and 96 and ensure full compliance with the Buy American Act and the Berry Amendment. All delivered materials must be accompanied by Mill-Material Certification adhering to ASTM A700 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 423440 and is managed by Depot Oklahoma. Interested parties must submit their responses by the deadline of November 16, 2026.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Extruded Aluminum Alloy 7075-T75311 Flat BarsThis subcontract, managed by the Department of Defense through Depot Oklahoma, involves the supply of extruded aluminum alloy 7075-T75311 flat bars to prime contractors supporting DLA Troop Support supply contracts. The required materials must be 3.000 inches thick and 4.000 inches wide, provided in whole foot lengths of 10, 11, or 12 feet. All bars must feature legible markings via stamping or stenciling and strictly adhere to the DLA Master List of Technical and Quality Requirements. The performance of this contract will take place at Tinker AFB, zip code 73145-8000. Interested parties should note that the solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026. The procurement falls under NAICS code 331221 for the delivery of physical aluminum alloy bars meeting the specified dimensions and temper.

Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0419

This solicitation, issued by the DLA Troop Support Construction and Equipment office, is for the procurement of 23 units of plastic sheet under NSN 9330-01-462-9630. The contract is a request for quotations with a delivery schedule of 487 days after the award, with a required ship date of March 24, 2027. A critical component of this requirement is the First Article Test (FAT), which requires the delivery of one unit within 180 calendar days of the contract date. The government will evaluate offers based on the unit price and the associated cost of first article testing, which is estimated at 13,300.00 dollars. The contract imposes strict regulatory and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Technical data is restricted to contractors with approved US/Canada Joint Certification Program certification. Performance is subject to quality standards such as SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the point of origin. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific mandates for hazardous materials per the Hazard Communication Standard. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0213

Solicitation SPE8E4-27-T-0213 is a Request for Quotations issued by DLA Troop Support for the procurement of 122 feet of extruded flat aluminum alloy 7075 T-73511 metal bars. The material must be 3.000 inches thick and 4.000 inches wide, supplied in whole feet lengths between 10 and 12 feet. The contract requires strict adherence to technical standards including SAE AMS-QQ-A-200/11A, SAE AMS-QQ-A-200C, and ASTM B666/B666M-20. A Certificate of Quality Compliance is mandatory for every shipment, and the items must be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement is subject to the Qualified Suppliers List for Distributors (QSLD) and Manufacturers (QSLM) requirements, meaning only approved suppliers are eligible for award. Packaging and preservation must comply with MIL-STD-2073-1E and ASTM B660, with marking following MIL-STD-129. Specific marking requirements include the use of stamping or stenciling for legibility, and adhesive labels for units under 0.250 inches in nominal OD. The delivery is set for a need ship date of April 26, 2027, with a quantity variance allowed of plus or minus 10 percent. Inspection and acceptance will occur at the destination.

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0215

Solicitation SPE8E4-27-T-0215 is a request for quotations for the procurement of 43 feet of Steel Comp 630 metal bar, specifically hot rolled, round, and centerless ground with a 4.000 inch diameter and a reference weight of 48.06 lb/ft. This critical application item must comply with SAE AMS5643W Revision W and be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement requires a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and mandates strict continuous identification markings on each unit of issue, including the contract delivery order number, NSN, and manufacturer details. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract incorporates various federal regulations, including the Buy American Act and the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing. Packaging and preservation must adhere to ASTM A700 and MIL-STD-2073-1E, with marking following MIL-STD-129. Inspection and acceptance will take place at the destination. Quotations are due by November 16, 2026, via the DLA Internet Bid Board System (DIBBS), with a required delivery date of February 2, 2027.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0224

Solicitation SPE8E4-27-T-0224 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 51 feet of annealed round steel composite 4130 metal bar. The material must have a diameter of 3.000 inches and be supplied in whole feet lengths between 6 and 20 feet, with a reference weight of 24.033 lb/ft. The requirement is designated as NSN 9510-00-529-7315 and is subject to a quantity variance of plus or minus 10 percent. Delivery is required by April 20, 2027, with a need ship date of April 26, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for eligibility, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging standards apply, including adherence to MIL-STD-129 and ASTM A700, with specific requirements for continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, HUBZone price evaluation preferences, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination, and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0211

Solicitation SPE8E4-27-T-0211 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 52 feet of 4130 steel composite metal bar. The material must be cold drawn, normalized, and flat, with dimensions of 1.000 inch thickness and 2.000 inches width, supplied in whole feet lengths between 10 and 12 feet. Delivery is required within 160 days, with a need ship date of April 26, 2027, and the destination for inspection and acceptance is the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). Key compliance requirements include the provision of a Certificate of Quality Compliance with every shipment and adherence to rigorous marking and packaging standards, including MIL-STD-129, MIL-STD-2073-1E, and ASTM A700. Each unit of issue must feature continuous identification markings, including the contract delivery order number, NSN, and manufacturer details. The contract incorporates various FAR and DFARS clauses, including a price evaluation preference for HUBZone small businesses and strict adherence to the Buy American Act and NIST SP 800-171 cybersecurity requirements.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

304 Stainless Steel Round Bar Supply (Cold Finished/Centerless Ground)This subcontract involves the supply of 145 linear feet of 304 stainless steel round bars for prime contractors supporting Department of Defense supply contracts at Depot Oklahoma. The material must adhere to SAE AMS-QQ-S-763D and ASTM A700 standards, featuring a cold finish and centerless grind to a 0.750 inch diameter with three-quarters hard specifications. Bars are to be delivered in lengths of 10 to 12 feet, properly marked and packaged. To qualify for this requirement, the supplier must maintain a QSLD listing and provide full Mill-Material Certification. The performance of this contract is centered at Tinker AFB, with a response deadline set for November 13, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

Casting and Forging Services for Valve ComponentsThis subcontract involves the provision of raw cast or forged blanks for Shuttle Valves, specifically model MS28767AL-4, to support prime contractors on DLA Weapons Support Maritime Hardware and Electrical projects. The scope of work requires the industrial casting or forging of valve bodies using alloys that strictly adhere to MS28767AL-4 standards. To ensure quality and compliance, the provider must deliver comprehensive mill test reports and material certifications along with the physical valve blanks. The project is managed under the Department of Defense through Depot Oklahoma, with the place of performance located at Tinker AFB. This opportunity falls under NAICS code 332911 and was posted on November 2, 2026, with a response deadline of November 13, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Manufacture of Shuttle Valves (MS28767AL-4)This subcontract involves the manufacture and supply of 76 Shuttle Valves, part number MS28767AL-4, for the Department of Defense via Depot Oklahoma. The project supports DLA Weapons Support Maritime Hardware/Electrical initiatives and requires the production of finished, inspected valves that strictly adhere to MS military specifications. The production process necessitates precision fabrication utilizing casting or forging and specialized tooling to satisfy Critical Application Item standards. Performance of the contract will take place at Tinker AFB, with the work falling under NAICS code 332721.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS