Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of 7075-T6 Aluminum Sheet with MRS Treatment

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 144 linear feet of 7075-T6 aluminum sheet, 0.063 inches thick and 48 inches wide, featuring a clad surface and treated to achieve minimum residual stress to ensure dimensional stability and structural integrity. The material must comply with AMS-QQ-A-250/18 Revision B specifications, ensuring it meets stringent aerospace-grade quality and mechanical property standards. All units must be packaged per DLA RP001 guidelines and labeled in accordance with MIL-STD-129 to guarantee proper identification, traceability, and handling throughout the supply chain. Delivery is F.O.B. destination, meaning the supplier assumes all responsibility and cost for transportation until the goods reach the specified delivery point. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with a response deadline of July 30, 2026, and is classified under NAICS code 331315 for aluminum rolling, extruding, and drawing.

General Info

Supply 144 linear feet of 7075-T6 aluminum sheet per AMS-QQ-A-250/18 B, F.O.B. destination, by July 30, 2026.

Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSCView Agency

NAICS

331315 - Aluminum Sheet, Plate, and Foil ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA FLEET READINESS CENTER DLA PSC

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 144 linear feet of 0.063" thick, 48" wide, clad 7075-T6 aluminum sheet treated for minimum residual stress (MRS), meeting AMS-QQ-A-250/18 Rev B, with DLA RP001 packaging and MIL-STD-129 labeling, shipped F.O.B. destination.

Similar Contracts

Same NAICS industry code

SHEET ALUM MRS CLAD ONThe contract specifies the procurement of aluminum sheet material compliant with AMS-QQ-A-250/18, designated as 7075-T6 alloy, with dimensions of 0.063 inches thick by 48 inches wide by 144 inches long, featuring one-side cladding and mandatory minimum residual stress (MRS) treatment. The total quantity required is 144 linear feet, priced under a firm fixed-price term with zero tolerance for quantity variance. Deliveries must be made to the destination within 10 days after order issuance, with inspection and acceptance occurring upon arrival. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA’s RP001 packaging requirements to prevent damage during transit, and a Certificate of Quality Conformance must accompany each shipment. Material is identified by part number 9535-LN0031523 and NSN 9535-LN-003-1523, linked to purchase request 7017475495, with a required ship date of September 12, 2026. The solicitation number is SPEFA5-26-Q-0057, issued by the Defense Logistics Agency Fleet Readiness Center, with delivery addressed to the designated facility in Cherry Point, North Carolina, and contractual obligations bound by the DLA Master List of Technical and Quality Requirements.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

NET, CARGO 30 HAZThe contract involves the procurement of 41 units of NET, CARGO 30 HAZ with NSN 5411-01-529-9219, sourced from BOH ENVIRONMENTAL, L.L.C. with CAGE code 1NSG3. The item is designated as an exact product, meaning only the specified part number and entity are acceptable per the purchase order text, aligning with DLA regulations that restrict substitutions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. There is no shelf life requirement for this material. The solicitation number is SPE8E5-26-T-3669, posted on July 22, 2026, with responses due by August 3, 2026, and is a Total Small Business Set-Aside under FAR 19.5. The North American Industry Classification System code is 331315, and the contracting agency is the Department of Defense, specifically the Red River Receiving Bldg, with performance required at Texarkana, Texas, ZIP 75507-5000. Delivery must occur within 167 days after order, and the point of contact is Don Trachtman, reachable via email and phone provided. The procurement is managed through the DIBBS system and is part of a federal acquisition stream under strict compliance with DLA procedural mandates.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

NET, CARGO 48 FLOORThe contract pertains to the procurement of 35 units of NET, CARGO 48 FLOOR identified by NSN 5411015299217 under solicitation SPE8E5-26-T-3672, issued by the Defense Logistics Agency District San Joaquin. Delivery is required FOB origin within 167 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. The units must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, packaging materials, and unit containment standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Palletization must follow DLA packaging requirements, and transportation logistics are governed by DLA procedural notes C19 and C20. The item is subject to all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and covered defense information protocols may apply. The contract price is set at $35.00 per unit, totaling $1,225.00, with the original delivery deadline set for January 4, 2027 and a needed ship date of January 18, 2027. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 331315, and the primary point of contact is Don Trachtman.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Aluminum Alclad Metal Sheet SupplyThe contract calls for the supply of 600 aluminum alclad sheets measuring 0.032 inches thick by 48 inches by 144 inches, manufactured from alloy 2024-T3 and fully compliant with SAE AMS4462B and applicable military specifications. These materials are intended for specialized defense applications requiring high strength-to-weight ratios and corrosion resistance, typical of aerospace and defense system manufacturing. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing compliance with FAR 19.5 guidelines. The North American Industry Classification System code 331315 identifies the relevant industry as aluminum rolling, drawing, and extruding, ensuring the offeror possesses appropriate industrial capability. The solicitation was posted on July 20, 2026, with responses due by July 27, 2026, providing a one-week window for submission. The contract falls under the Department of Defense, specifically managed by the Construction & Equipment MRO SVC I organization, indicating the end-use is for maintenance, repair, and overhaul of military equipment. While no specific delivery location or point of contact is listed, performance is expected to support U.S. defense infrastructure, with all materials required to meet stringent defense quality standards. Interested parties must access the official solicitation portal via the provided DIBBS link to review full technical requirements and formal submission instructions.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Metal Plate Supply and ConformanceThe contract calls for the supply of aluminum alloy plates with precise specifications: 0.250 inch thickness and dimensions of 36 by 96 inches, fully compliant with SAE AMS4016N, ASTM B209, and AMS-QQ-A-250/8C standards. Full traceability and certified documentation are required to ensure every batch meets the mandated material and quality benchmarks, with all certifications included to verify conformance. The plates must be produced and delivered under strict adherence to established aerospace and military-grade material protocols, ensuring reliability for critical applications. This is a subcontract under the Department of Defense’s Construction & Equipment MRO SVC I program, with a solicitation posted on July 20, 2026, and responses due by July 27, 2026. It falls under NAICS code 331315, indicating a focus on aluminum rolling, extruding, and drawing. The place of performance and point of contact details are not specified, but the procurement is managed through the DLA’s DIBBS platform, and suppliers must meet stringent compliance and certification requirements to qualify for award. All deliveries must align with the contractual material standards and documentation expectations without exception.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLATE, METALMetal plate procurement under contract SPE8E9-26-Q-0602 for NSN 9535-00-975-2727 specifies a requirement for aluminum alloy 0.250 inch thick, 36 inches wide, and 96 inches long, delivered in whole-foot lengths only, with strict dimensional conformity and no allowance for test coupons. Each shipment must include a Certificate of Quality Compliance with mill-material certification, and every unit must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy grade and temper, manufacturer’s name, heat and lot number, and exact dimensions using approved methods such as stamping or stenciling that ensure legibility, water resistance, and no product contamination. Adhesive labels are mandated for smaller bars, tubes, and shapes under 0.250 inch nominal diameter, and tags are acceptable for wire. The material must conform to SAE AMS4016N, ASTM B209, ASTM B666/B666M-20, ASTM B660-23, and SAE AMS-QQ-A-250/8C standards, with packaging and preservation governed by MIL-STD-2073-1E and ASTM B660, using Level A requirements and marking in alignment with MIL-STD-129. Delivery is FOB origin within 60 days after award, with firm fixed pricing and zero variance allowed. Inspection and acceptance occur at destination, and only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, with non-compliant bids treated as exceptions that may result in criminal penalties. Any product furnished under this contract must fully comply with the QSL program unless explicitly authorized in writing by the government. Packaging must adhere to DLA’s packaging requirements, including palletization and special marking for dual-unit shipments, with delivery directed to DLA Distribution Depot Hill in Utah.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThe contract specifies the procurement of aluminum alclad metal sheets with a total thickness of 0.032 inches and 0.0016 inches of cladding on both sides, measuring 48 inches wide and 144 inches long, weighing approximately 22.33 pounds per sheet. The material must conform to SAE AMS4462B, ASTM B666/B666M-20, ASTM B660-23, and ASTM QQ-A-250/5C standards, with the alloy designated as 2024-T3. Each sheet must be supplied in whole-foot lengths only, and all units must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer name, heat and lot number, and dimensions using stamping or stenciling that is legible, waterproof, and free from contamination. Adhesive labels are permitted for small bars, tubes, and shapes under 0.250 inches nominal OD, while tags are acceptable for wire. A Certificate of Quality Compliance, or mill material certification, is mandatory with each shipment and must be forwarded to the DLA Troop Support Contracting Officer. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; any deviation from this requirement invalidates the bid unless explicitly disclosed. Products not sourced from approved QSLD distributors are considered unauthorized substitutions and may lead to criminal penalties. Packaging must comply with MIL-STD-2073-1E and RP001, including Level A preservation per ASTM B660, robust edge and corner protection, and full coverage top and bottom protection using fiberboard or better. Marking must follow MIL-STD-129 with special code ZZ. The contract is firm fixed price with zero variance in quantity, inspection and acceptance occur at destination, and FOB is origin. Delivery is required within 60 days of award for a total of 600 sheets, split between two shipments to Tinker AFB and Robins AFB. The solicitation is a total small business set-aside, with a response deadline 7 days after posting, and technical data requirements, including CDRL-METALSCERT, are managed through the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

PLATE, METALThe contract pertains to the procurement of aluminum alloy 6061 in temper T651, specifically in plate form with precise dimensions of 1 inch thick, 36 inches wide, and 96 inches long, weighing approximately 338.69 pounds per linear foot. All material must strictly adhere to the specified dimensions without exception, and test coupons are prohibited. A Certificate of Quality Compliance, issued by the mill, is mandatory for every shipment and must be provided to both the recipient and the DLA Troop Support Contracting Officer. Each unit must be permanently and legibly marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot number, and exact dimensions using approved methods such as stamping or stenciling, ensuring the markings are waterproof, durable, and non-contaminating. Material must be supplied in whole-foot increments only, with no fractional lengths permitted. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement constitutes a non-compliant bid with potential criminal consequences. The material must conform to industry standards ASTM B666/B666M-20 and ASTM B660-23, as referenced in the Technical Data Package. Packaging must meet MIL-STD-2073-1E with preservation methods following ASTM B660 Level A requirements, and marking must comply with MIL-STD-129, including dual-unit labeling where applicable. The contract specifies a firm fixed price with zero tolerance for quantity variance, destination inspection and acceptance, and FOB origin. Delivery is required within 60 days of award, with shipments directed to two federal distribution facilities in New Cumberland, Pennsylvania, and San Diego, California. Failure to meet any requirement, including documentation, marking, or supplier eligibility, will result in rejection of the product.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThis procurement specifies the supply of titanium alloy sheet metal with a nominal thickness of 0.0400 inches, width of 24 inches, and length of 4 feet, compliant with AMS-T-9046, AB-1, Cond A and classified under NSN 9535-01-353-7009 for use on the B-1B aircraft. The material must meet a minimum tensile strength of 134,000 psi and a minimum yield strength of 126,000 psi, with an annealed heat treatment condition, and is identified as a critical application item. All shipments require a Certificate of Quality Compliance (Mill-Material Certification) to be submitted with each delivery and forwarded to the DLA Contracting Officer. Continuous marking is mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions, using stamping or stenciling methods that are legible, waterproof, non-contaminating, and durable. Adhesive labels are permitted for small bars, tubes, and shapes under 0.250 inches in nominal OD, while tags are acceptable for wire. Material must conform to whole-foot lengths only and adhere strictly to dimensional tolerances. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation, and any deviation must be explicitly declared. Products supplied by non-QSLD distributors, even if manufactured to specification, are considered unauthorized substitutions and may result in criminal penalties. The requirement waives government inspection for qualified QSLD suppliers, relieving them of COQC, PVT, QAP-EQ003, and ASQ H1331 obligations. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including full material edge and corner protection, fiberboard or better top and bottom coverage, and marking per MIL-STD-129 without special codes unless otherwise specified. The item is delivered FOB origin with a firm fixed price, zero variance allowed, and a delivery deadline of 60 days after award. The destination for delivery is DLA Distribution Warner Robins, Georgia, and all markings must reflect dual-unit quantities when applicable. The contract is governed by DLA’s overarching technical and quality requirements as referenced in the DLA Master List, with revisions controlled by the

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

SHEET, METALThe contract requires the supply of 200 metal sheets made of aluminum alloy 7075 in temper T6, measuring 0.020 inches thick by 48 inches wide by 144 inches long, with a weight of 13.97 pounds per sheet, and all units must be supplied in whole-foot lengths only. Strict dimensional compliance is mandatory with no tolerance for test coupons, and each sheet must be marked with a complete set of identifiers including the DLA contract delivery order number, NSN, specification number and revision, alloy and temper, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be stamped or stenciled using legible, waterproof, and non-contaminating fluids, and adhesive labels are required for smaller bars, tubes, and shapes under 0.250 inches in nominal outer diameter. Packaging must comply with MIL-STD-2073-1E and ASTM B660, featuring robust four-corner protection, full side edge coverage, and fiberboard or better top and bottom protection, with preservation method ZZ as defined by ASTM B660 and marking method Z per ASTM B666. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation must be explicitly stated; failure to comply may result in criminal penalties. A Certificate of Quality Compliance (CoQC) and a Metal Certification must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. Inspection and acceptance occur at destination under firm fixed price terms with zero variance allowed, and delivery is due within 60 days of award. The materials must conform to referenced standards including SAE AMS4045M, ASTM B666/B666M-20, ASTM B660-23, MIL-STD-130N, and AN149051 through AN149150 Revision 3, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements. All packaging and labeling must also adhere to MIL-STD-129, and shipments must be sent to the designated DLA distribution facility at Robins Air Force Base, Georgia.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Specialty Metal Coating and Bonding Services

FA3020 82 Cons Lgc

POSTED

DEADLINE

359TRS METAL BOND COURSE PANELThe U.S. Air Force’s 82d Contracting Squadron at Sheppard AFB, Texas is soliciting quotes for 359 TRS Metal Bond Course Panels to be delivered to Pensacola, Florida under solicitation number FA302026Q0073. This is a combined synopsis and solicitation issued as a Request for Quotes in accordance with FAR Part 12 for commercial items, with no separate written solicitation to follow. The requirement is fully set aside for small businesses, with the NAICS code 331315 and a size standard of 1,400 employees. Offers must be submitted as Firm Fixed Price proposals via email to the designated contacts, and all submissions are due by 10:00 AM CST on July 27, 2026. Questions regarding the solicitation must be submitted in writing no later than 10:00 AM CST on July 22, 2026, to the same point of contact. All necessary documents, including specifications and the RFQ format, are available through the notice and contractors are responsible for regularly checking for amendments. Failure to access updates or submit questions and proposals on time may result in disqualification.

FA3020 82 Cons Lgc

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA FLEET READINESS CENTER DLA PSC

Same awarding agency

Tube Assembly Manufacturing and Delivery (Elbow-to-Elbow)The contract is for the manufacture and delivery of three units of a tube assembly identified by NSN 1560LLNC15516, designed with an elbow-to-elbow configuration, and must meet all applicable military packaging, labeling, and hazardous materials handling standards. This is a subcontract under the Department of Defense, specifically managed by the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, zip code 28533-0021. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026, with the North American Industry Classification System code 332994 indicating it falls under other miscellaneous fabricated metal product manufacturing. No set-aside designation or point of contact details are provided, and all work must be executed in full compliance with defense logistics and safety regulations.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Commercial Diaphragm Supply and DeliveryThe contract requires the supply, packaging, labeling, and delivery of 25 units of a specified diaphragm identified by NSN 1015LN0034266 to a military destination designated by DLA Fleet Readiness Center DLA PSC. All units must comply with federal military standards for packaging, marking, and inspection to ensure readiness and compatibility with defense logistics systems. The delivery site is located at Cherry Point, North Carolina, with a zip code of 28533-0021, and performance must align with the stringent quality and documentation requirements mandated by the Department of Defense. This subcontract, posted on July 23, 2026, with a response deadline of July 31, 2026, falls under NAICS code 332994, indicating fabrication of other finished metal products. There is no set-aside classification indicated, and the procurement is managed under the DLA framework to support fleet readiness operations. Interested parties must submit proposals through the official DIBBS portal by the stated deadline, and failure to meet packaging or labeling specifications could result in rejection regardless of product suitability.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires full compliance with hazard communication standards under OSHA 29 CFR 1910.1200 for all hazardous materials linked to valves and their packaging. This includes the preparation of accurate safety data sheets, proper hazard labeling, and ensuring all documentation and signage meet federal regulatory requirements. The work must be performed in alignment with the specified safety protocols to safeguard personnel and ensure regulatory adherence throughout the supply chain. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, ZIP code 28533-0021. The solicitation was posted on July 23, 2026, and responses are due by July 31, 2026. The NAICS code 541620 indicates the work falls under environmental consulting services, reflecting the technical and compliance-focused nature of the deliverables. All activities must be completed within the stipulated timeframe to meet federal procurement obligations.

Environmental Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires comprehensive packaging, labeling, and palletization services for solenoid valves destined for government shipment, adhering strictly to MIL-STD-129 standards for labeling, ASTM D3951 for packaging, and RP001 for palletization. These specifications ensure that all items are properly identified, protected during transit, and arranged for efficient handling and storage within military logistics systems. The work must be performed to meet exacting Department of Defense requirements, with compliance verified throughout the process to guarantee readiness and interoperability across defense supply chains. The solicitation is issued under NAICS code 561910 as a subcontract opportunity through the DLA Fleet Readiness Center at DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. Interested parties must submit responses by the deadline of July 31, 2026, following the solicitation posted on July 23, 2026. The nature of the work demands proven expertise in military-grade packaging and labeling procedures, with strict attention to detail and documentation to ensure seamless integration into government logistics operations. All contractors must be prepared to deliver fully compliant units without deviation, as failure to meet the stated standards may result in rejection of the shipment.

Packaging and Labeling Services

POSTED

DEADLINE

Solenoid Valve Supply and DeliveryThe contract requires the procurement and delivery of six units of a specified solenoid valve that must fully comply with MIL-spec standards, ensuring adherence to military-grade performance, durability, and safety requirements. Each unit must be properly packaged and labeled in accordance with federal and defense logistics protocols to guarantee traceability and readiness for military use. Delivery is to be made FOB destination to DLA Cherry Point, with the specified zip code 28533-0021, meaning the supplier assumes all costs and risks until the valves arrive at this location. The solicitation falls under NAICS code 335312, which categorizes it within the electrical equipment manufacturing sector, and is issued by the Department of Defense's DLA Fleet Readiness Center. The opportunity was posted on July 23, 2026, with a response deadline of July 31, 2026, and is structured as a subcontract, indicating it may be part of a larger prime contract or procurement chain. The delivery point and exact specifications underscore its critical role in logistical or operational systems supported by the military at Cherry Point.

Motor and Generator Manufacturing

POSTED

DEADLINE

Defense Logistics Packaging & Marking ServicesThe contract requires comprehensive packaging, preservation, and labeling services in full compliance with MIL-STD-129, ASTM D3951, and RP001 standards for shipment to the Defense Logistics Agency. This includes precise application of data matrix barcodes and proper palletization to ensure traceability, durability, and regulatory adherence throughout the defense supply chain. All work must be executed to meet rigorous military logistics requirements, with emphasis on accuracy, consistency, and readiness for inbound processing at DLA facilities. Performance is designated for Cherry Point, North Carolina, with a deadline for responses by July 31, 2026. The solicitation falls under NAICS code 493190 for Other Supporting Activities for Transportation, and is issued as a subcontract by the Department of Defense through the DLA Fleet Readiness Center. This procurement is focused on ensuring end-to-end logistical compliance for defense materiel, with all packaging and marking activities subject to strict DLA quality and documentation protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires full compliance with hazard communication standards for shipped components, encompassing the accurate preparation, maintenance, and distribution of Safety Data Sheets in accordance with OSHA’s 29 CFR 1910.1200 and the implementation of MIL-STD-129 for standardized labeling. All labeling must meet federal regulatory requirements to ensure proper identification of hazardous materials during transportation and handling, with strict adherence to format, content, and placement guidelines. The work is classified under NAICS code 541690 and is issued as a subcontract by the Department of Defense through the DLA Fleet Readiness Center DLA PSC, with performance required at Cherry Point, North Carolina, 28533-0021. Proposals must be submitted by the deadline of July 31, 2026, to meet the solicitation’s technical and regulatory expectations.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Precision Sheet Metal Fabrication – Aircraft Gutter ComponentThe contract calls for the precision fabrication of a right-hand aircraft gutter component in strict accordance with military specifications, requiring full compliance with material standards, dimensional tolerances, and surface finish requirements to ensure compatibility and performance within aviation platforms. The component must be manufactured to exacting standards suitable for integration into military aircraft systems, with quality control measures embedded throughout the production process to guarantee structural integrity and operational reliability. The work is solicited as a subcontract under NAICS code 332321, with performance required at Cherry Point, North Carolina, 28533-0021. The opportunity was posted on July 23, 2026, and responses are due by July 31, 2026, with the contracting entity being the DLA Fleet Readiness Center under the Department of Defense. All submissions must meet the technical, regulatory, and logistical expectations outlined by the government, and participation is restricted to qualified subcontractors capable of delivering defense-grade sheet metal components on schedule and to specification.

Metal Window and Door Manufacturing

POSTED

DEADLINE

Corrosion Protection and Surface Coating ServicesThe contract seeks providers of corrosion protection and surface coating services for fabricated metal components, specifically to meet rigorous military environmental standards that ensure long-term durability and operational readiness. Services must include the application of protective coatings, plating, or specialized surface treatments designed to withstand extreme conditions, with performance requirements aligned to defense sector specifications. The work is to be performed at Cherry Point, North Carolina, with a strict submission deadline of July 31, 2026, and the opportunity is structured as a subcontract under the NAICS code 332813 for metal coating, engraving, and related services. The contracting entity is the Defense Logistics Agency Fleet Readiness Center under the Department of Defense, indicating a high-security, mission-critical context where compliance, quality control, and adherence to military protocols are non-negotiable.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

MIL-STD-129 Compliant Labeling and Packaging ServicesThe contract requires the provision of barcode labeling, marking, and packaging services strictly compliant with MIL-STD-129 standards for defense-related shipments, ensuring uniformity and traceability across military logistics. Services must meet all technical and procedural requirements outlined in the military standard for identifying, labeling, and packaging materiel destined for the Department of Defense supply chain, including correct data content, symbology, placement, and durability of labels. The work is specifically scoped for performance at Cherry Point, North Carolina, with the DLA Fleet Readiness Center DLA PSC as the overseeing agency under the Department of Defense. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of July 31, 2026, and is classified under NAICS code 811212 for industrial and commercial laundry and drycleaning services, though the actual work centers on defense packaging and labeling. The contract is not subject to any set-aside provisions and is open to eligible subcontractors capable of delivering MIL-STD-129-compliant solutions. Performance must align with DoD logistical integrity standards, and bidders must be prepared to demonstrate proven experience and compliance capabilities in military packaging and labeling operations. All submissions should be directed via the DIBBS platform using the provided solicitation link.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Raw Metal Material Supply for Defense ComponentThe contract involves the supply of raw iron, steel, or alloy materials necessary for the fabrication of military-grade metal components, specifically the ANGLE RAMP FLOOR, which is critical for defense applications. The materials must meet stringent quality and specification standards to ensure structural integrity and operational reliability in military environments. The solicitation is issued as a subcontract under NAICS code 331110, indicating the focus on iron and steel mills and ferroalloy manufacturing, and is managed by the DLA Fleet Readiness Center under the Department of Defense. Performance of the contract will be executed at Cherry Point, North Carolina, with the zip code 28533-0021, which serves as the designated place of performance for delivery and inspection. The solicitation was posted on July 23, 2026, and responses must be submitted by July 31, 2026, creating a six-day window for qualified suppliers to submit proposals. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors without restrictions based on business size, ownership, or other categories. The absence of a point of contact in the data means vendors are advised to rely on the provided DIBBS link for submission details and procedural guidance. Given the nature of the end-use component, compliance with defense material specifications, traceability of raw material origins, and adherence to applicable military standards are critical requirements for any prospective supplier.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Supply of ANGLE RAMP FLOOR for Military AircraftThe contract specifies the manufacture and delivery of one ANGLE RAMP FLOOR with National Stock Number 1560LINC08266, a precision metal component designed for use in military aircraft or ground support systems, requiring strict adherence to defense specifications. The component is critical to the operational readiness of defense platforms and must be produced to exacting quality and tolerances to ensure compatibility and safety in high-stress military environments. The solicitation is issued as a subcontract under the NAICS code 332992, indicating specialized manufacturing not otherwise classified, and is managed by the DLA Fleet Readiness Center DLA PSC, a key logistics and supply chain arm of the Department of Defense. The opportunity is posted with a response deadline of July 31, 2026, and performance is required at Cherry Point, North Carolina, with a ZIP code of 28533-0021. Although no solicitation number or point of contact is listed, interested parties are directed to the DIBBS platform via the provided URL for full bidding details and documentation. The contract structure and location suggest this is part of a broader effort to maintain or upgrade military aviation infrastructure, with the delivered unit expected to integrate seamlessly into existing systems without modification. Timely and compliant delivery is essential to support defense readiness timelines.

Small Arms Ammunition Manufacturing

POSTED

DEADLINE