Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace/Defense Grade Raw Materials

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of aerospace and defense grade raw metals or alloys to prime contractors supporting DLA Distribution San Joaquin projects. The materials are specifically intended for the manufacture of Wedge P/N 9376792-4 and must strictly adhere to the DLA Master List of Technical and Quality Requirements. To ensure full traceability and quality assurance, the provider is required to deliver certified raw material stock accompanied by Mill Test Reports. The contract mandates strict adherence to federal regulations, including ITAR compliance for the handling of controlled technical data and compliance with DFARS specialty metals requirements. Performance for this contract is centered in Tracy, California, under NAICS code 331210. Interested parties must have submitted responses by the deadline of November 16, 2026.

General Info

Supply aerospace metals for Wedge P/N 9376792-4 following DLA and ITAR regulations.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0572.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WEDGE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies defense-grade raw metal or alloys for prime contractors on DLA Distribution San Joaquin projects to manufacture Wedge P/N 9376792-4. Sources materials meeting DLA Master List of Technical and Quality Requirements and provides Mill Test Reports for traceability. Requires ITAR compliance for handling controlled technical data and adherence to DFARS specialty metals requirements. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Raw Material Supply for NSN 5355-01-191-0559This subcontract involves the supply of raw material stock to prime contractors for the manufacture of Knob NSN 5355-01-191-0559, supporting the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider is responsible for sourcing materials that strictly adhere to the chemical and physical properties defined in the part standard and delivering the stock directly to the manufacturer. To ensure quality and regulatory adherence, the provider must furnish Material Certifications and Mill Test Reports, which are essential for maintaining traceability and confirming compliance with the Buy American Act. The performance of this contract is centered at Tinker AFB, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Specialized Metal Tubing SupplyThis subcontract involves the supply of specialized raw metal tubing for prime contractors supporting DLA Weapons Support projects under the Department of Defense. The provider is responsible for sourcing and delivering metal stock that adheres to BAE Systems P/N 12364539 material grades, ensuring all deliveries are made to the manufacturer. A critical requirement of the agreement is the provision of full material traceability and Mill Test Reports to verify quality. Additionally, all supplied materials must strictly comply with the Buy American Act and the Berry Amendment. Performance for this contract is centered in New Cumberland.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Raw Material Supply for Shaft CouplingsThis subcontract for Raw Material Supply for Shaft Couplings supports the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider will supply certified raw metal stock, such as bars, billets, or forgings, ensuring all materials adhere to the chemical and physical properties specified in technical drawings. Deliveries must be made to the fabrication facility in New Cumberland, Pennsylvania, and must be accompanied by Material Test Reports and Certificates of Conformance. To be eligible, contractors must maintain ISO 9001 certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. This procurement falls under NAICS code 331210 and is intended for prime contractors managing these specific defense supply chain projects.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Raw Material Supply for Valve DiskThis subcontract involves the supply of certified raw metal stock for valve disks to support prime contractors on projects for DLA Distribution San Joaquin. The provider is responsible for sourcing alloys that strictly adhere to the chemical and physical properties specified for NSN 4820-01-479-4627 as outlined in the DLA Master List. All deliveries must be accompanied by Material Test Reports and Certificates of Conformance to verify quality and specifications. The contract mandates strict compliance with the Buy American Act and requires that all materials be mercury-free. Performance for this requirement will take place in Tracy, California, under NAICS code 331210. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Stainless Steel Raw Material SupplyThis subcontract involves the supply of certified stainless steel raw material to prime contractors supporting DLA Weapons Support projects. The materials must strictly adhere to NSN 3040-01-248-5219 specifications, and the provider is required to submit Mill Test Reports to verify that the grade and origin of the steel comply with the Buy American and Balance of Payments Program. Managed under the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency, the contract falls under NAICS code 331210. Performance for this requirement is located in Tracy, California, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 7 hours ago

DEADLINE

Metal Tube Assembly Supply (NSN 4710-01-213-8756)This subcontract involves the manufacture and supply of metal tube assemblies, specifically NSN 4710-01-213-8756, for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The selected provider must utilize metal fabrication equipment and materials that strictly adhere to the technical specifications associated with the identified national stock number. Performance will take place in New Cumberland, Pennsylvania, with deliveries conducted under FOB Origin terms. To be eligible and compliant, the contractor must maintain an active SAM registration and utilize the Wide Area Workflow system for all invoicing processes. The opportunity falls under NAICS code 331210, with a response deadline set for November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Certified Nickel Alloy Raw MaterialThis subcontract, managed by the Department of Defense through the DDSP New Cumberland Facility, involves the supply of certified nickel alloy raw material for prime contractors working on DLA Weapons Support projects. The scope of work includes providing bars, billets, or forgings that meet the specific grade requirements for NSN 4820012733334. A critical safety and quality requirement is the total absence of mercury or mercury-containing compounds within the supplied materials. The selected provider is responsible for delivering the certified raw material directly to the fabricator and must provide comprehensive Material Test Reports and certifications of compliance in accordance with the Buy American Act. This procurement falls under NAICS code 331210, with performance taking place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Raw Material Supply for Shoulder ScrewsThis subcontract involves the supply of certified raw metal stock for prime contractors working on projects for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The scope of work requires the sourcing and delivery of high-grade alloy or specialty steel bar stock that strictly adheres to the chemical and physical properties specified for NSN 5305-01-666-6490. To ensure quality and compliance, the provider must furnish Material Test Reports and Certificates of Conformance with the delivered materials. The project falls under NAICS code 331210 and is designated for performance in New Cumberland. Interested parties should note the posting date of November 6, 2026, with a response deadline set for November 13, 2026. This procurement focuses on the critical delivery of certified raw materials necessary for the production of shoulder screws.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Raw Materials for Precision RetainersThis subcontract, issued by the Department of Defense for the DLA Weapons Support Land Supply Chain, involves the supply of raw metal or alloy stock specifically for precision retainers under part number 5121814. The selected provider must ensure all materials meet strict chemical and physical property requirements and deliver certified raw material stock to New Cumberland. To maintain compliance, the contractor is required to provide Material Test Reports and Certificates of Conformance verifying that the materials contain no mercury or ozone-depleting chemicals. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Raw Material Supply for Valve StemsThis subcontract, managed by the DLA Dist San Joaquin for the Department of Defense, involves the procurement of raw metal stock for fluid valve stems under NSN 4820-01-546-9932. The selected provider is responsible for sourcing and delivering alloy or stainless steel bar stock or forgings that adhere to strict chemical composition requirements. All deliveries must be accompanied by Material Test Reports and Certificates of Conformance to ensure quality and specification compliance. The contract mandates strict adherence to the Berry Amendment and requires that all supplied materials be mercury-free. Performance for this requirement is centered in Tracy, California. Interested parties must respond by November 16, 2026, to provide the certified raw metal stock necessary for prime contractors to fulfill their DLA supply obligations.

DLA DIST SAN JOAQUIN

POSTED

about 7 hours ago

DEADLINE

Supply of Aerospace-Grade Alloy for Turnlock FastenersThis subcontract involves the supply of raw aerospace-grade alloy bar stock for prime contractors supporting DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties defined in BACS specifications for part number BACS21AE10C6. To ensure compliance and quality, the provider is required to deliver certified raw material stock accompanied by Material Test Reports and Certificates of Conformance in accordance with the Buy American Act. Managed by the Department of Defense under NAICS code 331210, the contract is focused on materials for turnlock fasteners. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 13, 2026, for this procurement effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Supply of Certified Alloy Steel/Specialty Metal for Eye BoltsThis subcontract involves the supply of certified alloy steel and specialty metal raw stock, specifically bars, rods, or billets, for the production of eye bolts on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in MIL-DTL-53039F, MIL-DTL-53022F, MIL-DTL-0053030B, and MIL-DTL-53084C. The selected supplier is responsible for delivering the certified stock directly to the manufacturer along with all necessary Material Test Reports and certifications of compliance. The contract is managed under the Department of Defense and requires strict adherence to the Berry Amendment as well as ITAR and EAR compliance. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 331210. Interested parties must submit their responses by the deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors under DLA DIST SAN JOAQUIN supply contracts. The scope of work involves specialized packaging, labeling, and palletization of cargo to ensure durability and survival during transit to military distribution centers. All services must strictly adhere to MIL-STD-129, ASTM D3951, and RP001 standards, utilizing compliant materials to produce shipments ready for FOB Origin pickup. The project is managed under NAICS code 561910 for the Department of Defense, with the place of performance located in Tracy, California. Interested parties should note the response deadline of November 12, 2026, for this specific procurement effort.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Globe Valve Supply (NSN 4820016520926)This subcontract involves the supply of two globe valves under NSN 4820016520926 for prime contractors supporting DLA DIST SAN JOAQUIN. The selected provider is responsible for manufacturing or sourcing valves that strictly conform to the DLA Master List of Technical and Quality Requirements and specific NSN specifications. All deliverables must be shipped FOB Origin from the place of performance in Tracy, California. Quality control is managed through inspection and acceptance performed at the point of origin. Additionally, the contractor must ensure full compliance with 29 CFR 1910.1200 regarding hazardous classifications. This procurement falls under NAICS code 332911 and is managed by the Department of Defense.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Hydraulic Servovalves (NSN 4820-01-416-1584)This subcontract involves the supply of two specialized hydraulic servovalves, identified by NSN 4820-01-416-1584, to prime contractors supporting DLA supply contracts. The scope of work requires the manufacturer or source to provide completed units that adhere to strict military packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 requirements. Managed by the Department of Defense through DLA DIST San Joaquin, the contract falls under NAICS code 332912. Performance of the contract is centered in Tracy, California. The solicitation was posted on November 6, 2026, with a response deadline set for November 16, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 7 hours ago

DEADLINE

Directional Control Valve SupplyThis subcontract involves the supply of 23 individual Directional Control Valve Cartridges to support DLA Weapons Support Maritime Hardware and Electrical contracts. The provider is responsible for manufacturing or sourcing the valve cartridges identified by NSN 7019012981, ensuring all items meet strict technical specifications and adhere to DLA shipping and labeling requirements. Managed by the Department of Defense through DLA DIST SAN JOAQUIN, the contract falls under NAICS code 332911. Performance for this requirement is centered in Tracy, California, with a response deadline set for November 16, 2026.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

Industrial Safety Belt Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 9,000 industrial safety belts for prime contractors supporting the Defense Logistics Agency. The contractor is responsible for sourcing or producing belts identified by NSN 4240-01-627-7870, ensuring strict adherence to TDP Rev A Gen 1 technical drawings. All deliverables must meet rigorous military standards, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. Managed by the Department of Defense through DLA DIST San Joaquin, the contract falls under NAICS code 315220. The place of performance is located in Tracy, California. Interested parties must respond by November 16, 2026, to fulfill the requirement for these standardized safety components.

Men’s and Boys’ Cut and Sew Apparel Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision Machined Valve Disk (NSN 4820-01-479-4627)This subcontract involves the manufacture of precision machined valve disks under NSN 4820-01-479-4627 for prime contractors supporting DLA Distribution San Joaquin. The scope of work requires the use of CNC machining centers to achieve strict dimensional tolerances and quality standards as defined by the DLA Master List. A critical requirement of the production process is ensuring full mercury-free compliance for all delivered components. The project is categorized under NAICS code 332710 and will be performed in Tracy, California. All finished and inspected valve disks must adhere to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026.

POSTED

about 7 hours ago

DEADLINE

Quick-Disconnect Coupling and Gasket SupplyThis subcontract opportunity, managed by the DLA DIST SAN JOAQUIN under the Department of Defense, involves the supply of 3-inch male and female quick-disconnect couplings and 3-inch gaskets. These components are intended for prime contractors working on DLA Weapons Support Maritime Hardware projects and must strictly adhere to the dimensions and material specifications outlined in Drawing NR 97403 13222E9888 to ensure suitability for maritime and weapons support environments. The contract is designated as a Total Small Business Set-Aside under NAICS code 332991, with the place of performance located in Tracy, California. Interested parties must submit their responses by November 16, 2026, to provide the bulk quantities of couplings and gaskets required for assembly integration.

Ball and Roller Bearing Manufacturing

POSTED

about 7 hours ago

DEADLINE

Quick-Acting Ball Valve Assembly ManufacturingThis subcontract involves the manufacture and assembly of 34 quick-acting 3-inch ball valves for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The scope of work requires the integration of one male quick disconnect coupling, one female quick disconnect coupling, and one gasket per unit, strictly adhering to Basic Drawing NR 97403 13222E9888 (Rev B) and Reference Drawing NR 97403 13227E6160 (Rev A). Precision machining and full compliance with DLA quality standards are mandatory for all deliverables. The project is managed by the Department of Defense through DLA DIST SAN JOAQUIN and is designated as a Total Small Business Set-Aside under NAICS code 332911. Performance will take place in Tracy, California. Interested parties must respond by November 16, 2026, to be considered for this specialized maritime hardware assembly contract.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

Plug Valve Parts Kit SupplierThis subcontract opportunity with the Department of Defense, specifically DLA DIST SAN JOAQUIN, requires the supply of 20 plug valve parts kits. The kits must meet Swagelok Co 3T9T9 P/N SS-9K-5PD specifications for NSN 4820-01-272-8620 and be marked according to MIL-STD-129 standards. Performance for this contract will take place in Tracy, California. Eligible suppliers must possess a valid CAGE code, UEI, and active SAM registration to be considered. The response deadline for this requirement is November 16, 2026. The final deliverable consists of 20 completed and properly marked parts kits delivered to the agency.

Industrial Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Valve Stem Surface Treatment and CoatingThis subcontract involves providing specialized surface treatments and coatings for fluid valve stems under NSN 4820-01-546-9932 to support prime contractors on DLA supply contracts. The scope of work requires the application of protective plating and coatings using industrial plating tanks and anodizing equipment to guarantee seal integrity and corrosion resistance. All work must be performed in strict accordance with the DLA Master List of Technical and Quality Requirements. The project is managed by the Department of Defense through DLA DIST San Joaquin, with the place of performance located in Tracy, California. Classified under NAICS code 332813, the contract was posted on November 6, 2026, with a response deadline of November 16, 2026. The final deliverable consists of finished, coated valve stems that meet all specified technical standards.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS