Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Alloy/Material for Plate Nuts

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the procurement of aerospace-grade alloy raw metal stock. The materials are intended for prime contractors to manufacture self-locking plate nuts that meet the specific chemical and physical properties of NSN 5310-00-174-3746. Performance of the contract is centered in Tracy, California, under NAICS code 331210. To ensure quality and regulatory compliance, the supplier must adhere to the Buy American Act and the Berry Amendment. All deliveries of certified raw material stock must be accompanied by Material Test Reports and Certificates of Conformance to maintain full traceability. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

General Info

DoD subcontract for aerospace-grade alloy raw metal stock for self-locking plate nuts.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-018N.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, SELF-LOCKING, PL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal stock for prime contractors on DLA supply contracts to manufacture self-locking plate nuts. Sources aerospace-grade alloys meeting chemical and physical properties of NSN 5310-00-174-3746. Ensures compliance with the Buy American Act and the Berry Amendment. Provides Material Test Reports (MTRs) and Certificates of Conformance (CoC) for full traceability. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Raw Material Supply for Spur Gear FabricationThis subcontract involves the supply of certified raw alloy or metal stock intended for spur gear fabrication on DLA Weapons Support projects. The selected provider must source and deliver materials that strictly adhere to the chemical and physical properties outlined in the technical data package for NSN 30200153901. Performance for this contract will take place in Texarkana, Texas, under NAICS code 331210. Crucial compliance requirements include the provision of Mill Test Reports and formal certifications confirming that the materials are free from hexavalent chromium and Class I ozone-depleting chemicals. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, for the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, titled Aerospace Grade Raw Material Supply, involves the provision of certified raw metals and alloys for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the delivery of materials that strictly adhere to technical drawings for NSN 1450-01-657-9533, with all shipments delivered directly to the fabricator. Essential documentation must accompany the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with Federal Standard No. 313. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. The project falls under NAICS code 331210 and specifies Portsmouth, 03801-5000, as the place of performance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, involves the supply of certified aerospace-grade raw material stock. The scope of work focuses on providing alloy billets or forgings specifically for the production of Linear Actuating Cylinder Heads for prime contractors. Performance for this contract is centered at Tinker AFB. A critical requirement of the agreement is strict adherence to DFARS 252.225-7001 Buy American regulations. To ensure quality and regulatory compliance, all delivered materials must include full traceability and accompanying Mill Test Reports. The opportunity is categorized under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Critical Grade Stainless Steel SupplyThis subcontract, titled Critical Grade Stainless Steel Supply, involves the provision of certified high-grade stainless steel raw materials for prime contractors working on DLA Weapons Support Maritime Hardware projects. The scope of work specifically focuses on sourcing materials for critical-application socket weld valve bodies, ensuring all supplies comply with the Buy American and Balance of Payments Program. To maintain quality and safety standards, the provider must deliver certified stainless steel stock accompanied by Mill Test Reports and Safety Data Sheets. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331210. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Supply of Qualified Raw Materials for Support RodsThis subcontract involves the supply of certified raw materials for support rods to prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The provider is required to source materials strictly from the Qualified Products List or Qualified Manufacturers List as specified by Drawing NR 19200 12940982. All deliveries must include Mill Test Reports and certifications of origin to ensure quality and compliance. The contract mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this requirement is centered in Anniston, Alabama, under NAICS code 331210. Interested parties must respond by November 19, 2026, to provide the necessary certified raw material stock for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Metal Stock SupplyThis subcontract involves the procurement and delivery of aerospace-grade metal stock, including billet, bar, or plate, to support prime contractors on DLA Weapons Support ASC projects. The materials must strictly adhere to the specifications outlined in Basic Drawing NR 19207 11673854 Revision E and be delivered to the designated fabricator. To ensure full traceability and regulatory compliance, the supplier is required to provide Mill Test Reports and maintain strict adherence to ITAR and EAR export controls during material handling. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, the project is categorized under NAICS code 331210. Performance of the contract will take place in Anniston, Alabama. Interested parties must respond by November 16, 2026, to be considered for this supply requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Hydraulic Grade Material SupplyThis subcontract, titled Hydraulic Grade Material Supply, involves the provision of raw metal stock and billets for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The supplier is responsible for delivering certified raw materials accompanied by Mill Test Reports, ensuring all materials strictly adhere to specifications outlined in drawings 80020 6534C554, 80020 6534D688, 80020 6300-001, and 80020 6530C124. Additionally, the contractor must maintain full compliance with the Buy American Act and the Balance of Payments Program. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210, with the place of performance located in New Cumberland. Interested parties must respond by November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Berry Amendment Compliant Raw Material SupplyThis subcontract involves the sourcing and delivery of raw metal and alloy stock to support prime contractors working on DLA Weapons Support projects. The supplier is responsible for providing materials that strictly adhere to Drawing NR 19207 12612820 specifications and delivering the certified stock directly to the designated fabricator. A critical requirement of this agreement is the provision of full traceability and certification of origin to ensure compliance with the Berry Amendment and the Buy American Act. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Steel Tubing SupplyThis subcontract, titled Aerospace-Grade Steel Tubing Supply, involves the provision of raw steel tubing for prime contractors working on projects for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for sourcing material that adheres to the specific alloy and tolerance requirements of Rev E for NSN 4710-01-189-1838. To ensure full compliance with DFARS domestic material restrictions and prohibited substance standards, the provider must supply Mill Test Reports and Certificates of Conformance upon delivery of the tubing to the fabricator. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 331210. Performance for this contract will take place at Tinker AFB. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of CRES Metallic Tubing (NSN 4710-01-102-6415)This subcontract involves the supply of 281 feet of plain round, straight seamed CRES steel tubing for the DLA Weapons Support Fluid Handling Division. The tubing must feature a 1.00 inch outer diameter and a 0.052 inch wall thickness, conforming strictly to SAE AMS5561H standards. Additionally, the contractor is required to apply continuous identification marking according to SAE-AMS-STD-185 and provide metal certification through CDRL DD Form 1423s. The project requires all materials to be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance for this contract is centered in San Diego, California, under NAICS code 331210. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for Lower Track FabricationThis subcontract focuses on the supply of raw metals and alloys for lower track fabrication in support of DLA Weapons Support Land Supply Chain projects. The provider must deliver certified raw materials that strictly adhere to the chemical and physical properties specified in Drawing NR 78286 65302-12018. To ensure quality and compliance, the contractor is required to provide Mill Test Reports for full traceability and guarantee that all materials are free of Class I Ozone Depleting Chemicals. The project is managed under NAICS code 331210 and will be performed in Cherry Point. Access to necessary technical data requires JCP certification. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense initiative.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for NSN 5310-00-927-9400This subcontract involves the supply of certified raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of metal sheets, coils, or bars that strictly adhere to the chemical and physical properties specified in the technical data for NSN 5310-00-927-9400. To ensure full traceability, the supplier must provide Material Test Reports or Certificates of Conformance with all deliveries made to the manufacturer. Managed by the Department of Defense under NAICS code 331210, the contract mandates strict compliance with ITAR and EAR export controls. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on aerospace projects for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, marking, and preservation for high-precision bearings to ensure they are ready for FOB Origin shipment. All activities must be performed at Tinker AFB and strictly adhere to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-197M for preservation. Qualified providers must possess certification in DLA/DoD packaging standards and have access to industrial marking equipment and appropriate preservation materials. The opportunity falls under NAICS code 561910, with a response deadline set for November 16, 2026.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Precision Annular Ball Bearing ManufacturerThis subcontract involves the manufacture and supply of ten precision annular ball bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes the precision machining and assembly of components under NSN 3110-00-858-2670, with a specific requirement to perform First Article Testing on three units for delivery to Tinker AFB. To ensure compliance and quality, the provider must maintain SAE AS9100 certification and possess the capability to produce Critical Safety Items. All production must adhere to the DLA Master List RA001 and comply with the Berry Amendment and Buy American Act regulations.

Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

Plain Hexagon Nut ManufacturerThis subcontract requires the manufacture and delivery of 465 plain hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. All units must be produced according to NSN 5310-01-593-9654 specifications and the DLA Master List of Technical and Quality Requirements. The contract strictly prohibits the use of additive manufacturing and mandates that materials be free of hexavalent chromium. To ensure quality control, the manufacturer must utilize inspection systems certified under ISO 9001 or SAE AS9003. The completed order of 465 nuts is to be delivered FOB Origin to the DDSP New Cumberland Facility in Pennsylvania. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Panel Proc Control (NSN 1680-01-6501890)This subcontract involves the supply of one Panel Proc Control unit, part number 123AV93340-5, for prime contractors supporting Defense Logistics Agency Foreign Military Sales projects. The work is managed under the DLA Weapons Support ASC Commodities Division of the Department of Defense and falls under NAICS code 334413. The contractor is responsible for manufacturing or sourcing the component in strict accordance with the DLA Master List requirements. Quality assurance is a critical component of the agreement, requiring the use of inspection systems that comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916 or ASQ H1331, while packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The final inspected and marked component is to be delivered FOB Origin.

Semiconductor and Related Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Machine Bolts (NSN 5306015564899)This subcontract involves the procurement of 239 machine bolts for prime contractors supporting DLA Weapons Support ASC projects. The supplied hardware must strictly adhere to NSN 5306015564899 and Fastenal P/N 0161880 specifications. All items are to be delivered FOB Origin to DLA Distribution in New Cumberland, Pennsylvania. The contractor is required to follow specific packaging and marking standards, including ASTM D3951, RP001, and MIL-STD-129. Additionally, the provider must maintain compliance with NIST SP 800-171 and adhere to the Buy American Act. The opportunity is categorized under NAICS code 423830 and is managed by the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Self-Locking Plate Nut SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the supply of 267 self-locking plate nuts identified by NSN 5310004550395. The contractor is responsible for manufacturing or sourcing these components while adhering to strict quality control sampling standards per MIL-STD-1916 or ASQ H1331. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The agreement mandates full compliance with MIL-STD-2073-1E, RP001, and MIL-STD-129 for all packaging and marking requirements. Additionally, the provider must ensure that all hazard warning labels meet 29 CFR 1910.1200 standards and provide Material Safety Data Sheets where applicable. This opportunity is designated as a Total Small Business Set-Aside.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Night Vision Utility Lights (NSN 6220-01-491-1898)This subcontract, set aside for Women-Owned Small Businesses, involves the manufacture and supply of 45 Night Vision Utility Lights (NSN 6220-01-491-1898) for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict Department of Defense specifications for night vision compatibility and must adhere to the Buy American Act and Berry Amendment. Deliveries are designated for DLA Warner Robins and DLA Depot Oklahoma. Operational requirements include rigorous quality assurance performed according to MIL-STD-1916 or ASQ H1331, with packaging following MIL-STD-129 and MIL-STD-2073-1E standards. Additionally, the contractor must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. The project falls under NAICS code 339113 and is managed through the Department of Defense.

Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

Shear Bolt SupplyThis subcontract involves the supply of 17 specialized shear bolts for prime contractors under the Defense Logistics Agency Weapons Support ASC Commodities Division. The provider is responsible for manufacturing or sourcing these components in strict accordance with DLA technical data and the Master List of Technical and Quality Requirements, with a specific prohibition against unauthorized additive manufacturing. The contract mandates full compliance with the Buy American Act and NIST SP 800-171 security standards. Additionally, the provider must ensure supply chain traceability per DLAD #C03 and adhere to MIL-STD-129 and MIL-STD-2073-1E packaging specifications. Performance for this requirement is centered in Tracy, California.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier of Rigid Metal Conduit (NSN 5975-01-349-1798)This subcontract involves the manufacture or sourcing of four units of rigid metal conduit, specifically NSN 5975-01-349-1798, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The supplier must ensure all materials meet the DLA Master List of Technical and Quality Requirements and adhere to strict quality control standards, including zero-based sampling per MIL-STD-1916 or ASQ H1331. Packaging must be completed in accordance with MIL-STD-129 and RP001, with final delivery designated for DLA Distribution Warner Robins. Beyond technical specifications, the contractor is required to maintain cybersecurity compliance as outlined in NIST SP 800-171. The project falls under NAICS code 332312 and is managed by the Department of Defense. Interested parties must have submitted responses by the November 16, 2026, deadline.

Fabricated Structural Metal Manufacturing

POSTED

about 5 hours ago

DEADLINE

Hexagon Nut SupplyThis subcontract with the Department of Defense DLA Weapons Support ASC Commodities Division involves the supply of 460 plain hexagon nuts for prime contractors. The required components must be manufactured or sourced according to NSN 5310-12-390-7658 and part number DIN934-M5-6-A2B. The contractor is responsible for performing sampling per MIL-STD-1916 or ASQ H1331 and ensuring all items are packaged in accordance with ASTM D3951. Compliance requirements include adhering to FAR 52.246-11 quality standards and maintaining full supply chain traceability documentation under C03.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 5 hours ago

DEADLINE

Zinc Coating and Finishing for Critical FastenersThis subcontract involves providing specialized zinc coating and finishing services for critical steel hexagon nuts supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing industrial plating baths to apply the coating, ensuring that the entire process is strictly free of mercury, mercury compounds, and hexavalent chromium. All work must be performed in accordance with environmental regulations and the specific technical requirements outlined in the prime contract. The project is managed under the Department of Defense and requires the delivery of finished fasteners ready for final inspection. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this effort categorized under NAICS code 332813.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Self-Locking Hexagon NutsThis subcontract involves the manufacture of 921 zinc-coated steel self-locking hexagon nuts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The production must strictly adhere to Basic Drawing NR 10001 2533408 Revision B and TDP Rev A Gen 1, utilizing precision machining equipment and maintaining compliance with QAP 13873. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331. All delivered units of NSN 5310-00-020-0359 must be accompanied by a Certificate of Quality Compliance. The work is to be performed in New Cumberland, Pennsylvania.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS