Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Alloy Steel/Fastener Stock

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of aerospace-grade alloy steel bar stock or wire to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The provided raw materials must strictly adhere to the chemical and physical properties outlined in MS9358-12 and SAE AS9358 specifications. To ensure quality and compliance, the supplier is required to provide full material traceability and comprehensive Mill Test Reports for all certified stock delivered. The contract mandates strict adherence to the Buy American Act and the Berry Amendment. Performance for this requirement is centered in Barstow, California, under NAICS code 326291. Interested parties must respond by October 20, 2026, to provide the necessary certified raw materials for Department of Defense hardware production.

General Info

Supply aerospace alloy steel to DLA in Barstow, CA by October 20, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

326291 - Rubber Product Manufacturing for Mechanical Use

Place of Performance

BARSTOW, CA, 92311-5014, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-1649.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, PLAIN, CASTELLATED,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies aerospace-grade alloy steel bar stock or wire for prime contractors delivering DLA Weapons Support ASC hardware. Provides raw material meeting chemical and physical properties of MS9358-12 and SAE AS9358 specifications. Ensures full material traceability and provides Mill Test Reports (MTRs). Must comply with the Buy American Act and Berry Amendment. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

RFP AM-32063-AS (Procurement of Rubber Parts and Lanyard Cable for Refueling Equipment at PSO Lahore Aviation)

Solicitation # Doc341315288

Pakistan State Oil Company Ltd is soliciting bids for the procurement of rubber parts and lanyard cables for refueling equipment located at PSO Lahore Aviation. This solicitation, identified as AM-32063-AS, is conducted in accordance with PPRA Clause 42 b and requires electronic bid submissions through the SAP Ariba portal. The response deadline is October 22, 2026, with the primary point of contact being the PSO Regional Office in Lahore. Eligible bidders must be active taxpayers and provide scanned copies of a valid NTN, GST/PST certificates, and the CNIC of the owner or authorized representative. Additionally, vendors must certify that they are not blacklisted by any public or private entity and have not been involved in any fatal accidents during contract execution within the last two years. All requests for tender documents must be submitted on official letterhead. Conditional or partial proposals will be rejected, and any incomplete or false information provided during the process will result in immediate disqualification.

Pakistan State Oil Company Ltd

POSTED

about 12 hours ago

DEADLINE

Nonmetallic Hose Assembly ManufacturerThis subcontract involves the manufacture and assembly of five nonmetallic hose assemblies, identified by NSN 4720-01-484-1929, for the DLA Weapons Support Fluid Handling Division. The selected manufacturer must fabricate assemblies that integrate brass end fittings into nonmetallic hose bodies in strict accordance with MIL-PRF-370L specifications. To ensure quality and compliance, the contractor is required to maintain ISO 9001:2015 certified inspection systems, and the use of additive manufacturing is strictly prohibited. The project falls under NAICS code 326291, with a response deadline set for October 26, 2026, and performance taking place at FPO 96629.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturer of Plain Encased Seals (NSN 5330-01-327-4174)This subcontract involves the manufacture of 39,000 plain encased seals (NSN 5330-01-327-4174) for prime contractors supporting DLA Weapons Support Land projects. Production must strictly adhere to TDP Rev A Gen 1 and Basic Drawing NR 99193 3863005, with a mandatory requirement that all materials are asbestos-free and contain no Class I Ozone Depleting Chemicals. Performance of the contract will take place in Cherry Point. To qualify for this project, the manufacturer must maintain CMMC Level 2 and JCP certification, as well as full ITAR and EAR compliance to handle export-controlled technical data. The opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 326291 for the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nonmetallic Strip Seal Supplier (NSN 5330-01-200-4937)This subcontract involves the manufacture or procurement of four units of asbestos-free nonmetallic strip seals under NSN 5330-01-200-4937 for the DLA Weapons Support Land Supplier Opns Vehicle SPT. To ensure product integrity and UV protection, all seals must be packaged in opaque bags conforming to MIL-DTL-117. The contract explicitly prohibits the use of additive manufacturing in the production process. Compliance requirements are stringent, necessitating US/Canada Joint Certification Program certification to adhere to ITAR/EAR regulations and the Buy American Act. The performance of this contract is centered in Suffolk, Virginia, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture of Seal Assemblies (NSN 5330-00-625-3345)This subcontract involves the manufacture of 88,000 seal assemblies under NSN 5330-00-625-3345 for the DLA Weapons Support Land Supplier Ops Vehicle SPT. The project requires the use of non-additive manufacturing processes and strict adherence to quality assurance standards, specifically MIL-STD-1916 or ASQ H1331 zero-based sampling. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The contract is categorized under NAICS code 326291 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Preformed Packing (NSN 5330012606092)This subcontract involves the manufacture or procurement of 89 units of preformed packing, identified by NSN 5330012606092, for the DLA Weapons Support Nuclear Reactor Program. The contractor is required to ensure that all supplied materials are free of asbestos and mercury and maintain a minimum shelf life of 36 months due to the critical nature of the application. All items must be marked and packaged in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards, specifically adhering to RP001 and IP025 hazardous materials protocols. Delivery is designated as FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of CRES (Corrosion Resistant Steel) TubingThis subcontract involves the supply of raw corrosion resistant steel tubing or bar stock for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The required material must be 5/8 inch nominal size and adhere to the specific chemical and physical properties outlined in Drawing NR 07482 series. To ensure quality and traceability, the provider must deliver certified raw material stock accompanied by Mill Test Reports. The contract mandates strict compliance with the Buy American Act and the Berry Amendment. Performance for this requirement is located in Cherry Point, North Carolina. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense procurement under NAICS code 326291.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose (NSN 4720-01-171-3787)This subcontract involves the manufacture or sourcing of 43 units of nonmetallic hose, part number 50091951, for the HAWK missile system. The contractor will supply these components to prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. All deliverables must adhere to the DLA Master List of Technical and Quality Requirements and feature a non-extendable shelf life of 120 months. The project is categorized under NAICS code 326291 and pertains to NSN 4720-01-171-3787. Performance for this contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 12, 2026, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Gasket Supplier (NSN 5330-01-507-2966)This subcontract involves the manufacture or sourcing of 416 gaskets under NSN 5330-01-507-2966 to support prime contractors for the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations. All products must adhere to the DLA Master List RA001 requirements and follow strict packaging and marking standards including MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The final delivery of the gaskets is designated as FOB Origin to DLA Distribution in Warner Robins, Georgia. To be eligible, the supplier must maintain specific security and quality certifications, including CMMC Level 2, DFARS 252.204-7012, and the US/Canada Joint Certification Program. The opportunity falls under NAICS code 326291 and was posted on October 12, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the fabrication of 44 nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires cutting nonmetallic hose to a nominal length of 84 inches, fitting and securing end connectors, and conducting rigorous leak and pressure integrity testing to ensure operational safety and performance. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001) and follow MIL-STD-129 marking standards. The project is categorized under NAICS code 326291 and will be performed in New Cumberland. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly FabricationThis subcontract involves the manufacture of six nonmetallic hose assemblies under NSN 4720-01-418-3517 for the Department of Defense DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating these assemblies in strict accordance with the DLA Master List and specific technical drawings 19207 10867453 Revision C and 19207 12365278-76. Performance of the contract will take place in Anniston. To be eligible, the contractor must maintain JCP Certification to handle ITAR and EAR regulated data. Additionally, all deliverables must comply with MIL-STD-129 and MIL-STD-2073-1E standards. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026, falling under NAICS code 326291.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Mechanical Seal Replacement Kit ManufacturerThis subcontract involves the manufacture and assembly of 241 Seal Replacement Parts Kits under NSN 5330-01-394-3549 for prime contractors supporting DLA supply contracts. The scope of work includes fabricating individual seal components that adhere strictly to JARP Industries P/N 430457B or Oshkosh Defense LLC P/N 2GL629 specifications. All deliverables must be accompanied by a complete data package to ensure quality and compliance. Strict regulatory standards apply to this project, requiring all materials to be asbestos-free in accordance with FED-STD-313. Additionally, the manufacturer must ensure full compliance with the Buy American Act and the Berry Amendment. The work is associated with the Department of Defense and is designated for performance in New Cumberland.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Precision Setscrews (NSN 5305-01-684-6167)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Shipping Services

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Electrical Leads (NSN 5995-01-092-0829)

Small Electrical Appliance Manufacturing

POSTED

about 6 hours ago

DEADLINE

Blind Rivet Manufacturer (NSN 5320011124414)

Marking Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A6-27-R-X061

POSTED

about 6 hours ago

DEADLINE

CABLE ASSEMBLY, POWER, ELECTRICAL

Solicitation # SPE4A6-27-R-X069

POSTED

about 6 hours ago

DEADLINE

LIGHT ASSEMBLY, INDICATOR

Solicitation # SPE4A6-27-R-X064

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A6-27-Q-0117

Solicitation SPE4A6-27-Q-0117 is a firm fixed price request for the procurement of 13,000 setscrews, identified by NSN 5305-01-684-6167, for the Defense Logistics Agency Weapons Support ASC Commodities Division. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with inspection and acceptance occurring at the destination. Award will be based on best value, with a significant emphasis on past performance, specifically SPRS assessments and historical quality and delivery compliance. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. It explicitly prohibits the use of mercury or mercury compounds in preservation and packaging. Additionally, the requirement includes stringent cybersecurity and export control mandates, incorporating CMMC Level 2 certification requirements and ITAR/EAR regulations for technical data. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A6-27-R-X076

Solicitation SPE4A6-27-R-X076 is an Indefinite Delivery Purchase Order issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of electrical leads, identified by NSN 5995-01-092-0829. This is a total small business set-aside with an estimated annual demand of 210 units per year over a five-year base period, featuring a guaranteed minimum quantity of 55 units for the base year. Delivery is required within 150 days after receipt of the order to various CONUS stock locations, with shipping terms set as FOB Origin. The contract emphasizes strict quality and compliance standards, requiring inspection and acceptance at the source and adherence to MIL-STD-1916 or ASQ H1331 for sampling. Technical data is subject to export control under ITAR or EAR, and contractors must maintain approved US/Canada Joint Certification Program certification. Packaging must comply with DLA requirement RP001, and hazardous materials must be labeled according to the Hazard Communication Standard. Award will be based on best value, weighing price, quoted delivery, and past performance, with a heavy emphasis on SPRS assessments and historical quality and delivery compliance. Payment processing is managed electronically through the Wide Area WorkFlow system.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-4651

Solicitation SPE4A6-27-T-4651 is a fixed-price procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for 227 blind rivets, identified by NSN 5320011124414 and part number M08-08W. The items must be manufactured in accordance with the current revision of the applicable part standard, specifically NAS1921 Revision 10. Delivery is required within 164 days after receipt of order, with a need ship date of April 6, 2027, and a final required delivery date of May 30, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Quality assurance is critical, with inspection and acceptance occurring at the origin. Manufacturers must comply with SAE AS9003 or ISO 9001 standards, and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. The contract incorporates various DFARS and FAR clauses, including requirements for safeguarding covered defense information, prohibitions on certain telecommunications equipment, and compliance with the Buy American Act and Berry Amendment. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Hardware Manufacturing

POSTED

about 6 hours ago

DEADLINE

59--CABLE ASSEMBLY,SPECIAL

Solicitation # SPE4A6-27-T-4905

Solicitation SPE4A6-27-T-4905 is a total small business set-aside issued by the DLA Weapons Support ASC Commodities Division for the procurement of special purpose electrical cable assemblies, NSN 5995014632524. The requirement consists of two lines, with the primary line calling for 18 units to be delivered to Industries of the Blind Inc. within 284 days after order. All quotes must be submitted electronically via DIBBS by October 23, 2026. The procurement falls under NAICS code 334419 and requires compliance with ISO 9001:2015 quality standards. Key technical and administrative requirements include First Article Testing for two samples in accordance with Drawing 12465333 and MIL-HDBK-831. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific hazard labeling required for any hazardous materials per 29 CFR 1910.1200. Inspection and acceptance will occur at the origin. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. Additionally, the contract mandates compliance with the Buy American Act, the Berry Amendment, and CMMC Level 2 cybersecurity certification.

Other Electronic Component Manufacturing

POSTED

about 11 hours ago

DEADLINE

Specialized Electrical Component SupplyThis subcontract for Specialized Electrical Component Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves providing specialized wiring and connectors to prime contractors, with all materials sourced according to TDP Rev A Gen 2 and Drawing NR 30554 series. The contractor is responsible for delivering raw materials and connectors to the assembly manufacturer and providing necessary certifications of compliance for all components. Strict adherence to the Buy American Act and Berry Amendment is required for all supplied materials. The project is associated with NAICS code 335220 and is designated for performance at Fort Leonard Wood. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Major Household Appliance Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS