Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Aircraft Components and Subassemblies

Active

Federal

Response Deadline07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of OEM or certified replacement aircraft components and subassemblies intended for integration into AI modification kits, ensuring full traceability and complete documentation throughout the supply chain. All provided parts must strictly comply with approved technical data packages to guarantee compatibility, performance, and safety in operational environments. The requirement emphasizes adherence to rigorous quality and regulatory standards, with no tolerance for noncompliant or undocumented components, ensuring the integrity of the modification kits and the aircraft systems they support. Performance of this subcontract is designated for Tracy, California, with a response deadline of July 22, 2026, and the solicitation falls under the NAICS code 336419 for aircraft component and parts manufacturing. The contracting activity originates from the ASC Commodities Division within the Department of Defense, reflecting its military aviation support mission. All suppliers must demonstrate the capability to deliver certified replacement parts with end-to-end traceability, supporting long-term sustainment and mission readiness for defense aviation platforms.

General Info

Supply certified aircraft components with full traceability for DoD modification kits in Tracy, California, by July 22, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336419 - Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Response DeadlineJul 22

Submission deadline

Response Deadline

07/22/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of OEM or certified replacement aircraft components for use in AI modification kits, with full traceability, documentation, and compliance with technical data packages.

Similar Contracts

Same NAICS industry code

BOOT ASSY, AUXILIARYThe contract pertains to the procurement of 24 units of a BOOT ASSEMBLY, AUXILIARY with NSN 1650-01-132-0794, under solicitation SPE4A7-26-Q-0854, with a delivery deadline 202 days after award. This item is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—is prohibited without explicit authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory DOD training on export-controlled technical data handling, and have passed the DLA Export-Controlled Technical Data Questionnaire, with final approval granted by the DLA controlling authority. The Defense Federal Acquisition Regulation Supplement clause DFARS 252.225-7048 governs the handling of this data, applying equally to U.S. companies, their foreign subsidiaries, and foreign national employees. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Brian Kurtz listed as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

Ground-Based Launcher Request for Information (RFI)The Air Force Life Cycle Management Center’s Command, Control, Communications, and Battle Management Directorate at Wright-Patterson Air Force Base in Ohio is conducting market research through a Request for Information to explore potential industry capabilities for a Ground-Based Launcher. This RFI, identified by solicitation number FA8612_RFI_C3BM_2026_0002, is strictly for gathering information and does not represent a solicitation for proposals, nor does it obligate the government to initiate a contract or issue a future Request for Proposal. Responses are due by August 7, 2026, and submissions must align with the North American Industry Classification System code 336419. The opportunity is not set aside for any specific business size or veteran-owned category, and the government is not accepting unsolicited proposals at this stage. All inquiries and submissions should be directed to the designated point of contact, Christopher Core, with Heather Bakker available as a secondary contact for clarification. The response must be submitted through the SAM.gov portal linked in the official posting, and interested parties are advised to review all provided documentation for detailed technical expectations and requirements.

FA8612 Aflcmc C3BM C3

POSTED

about 21 hours ago

DEADLINE

CLOTH, FIBERGLASSThe contract pertains to the procurement of fiberglass cloth identified by NSN 5999-01-184-3935 and part number 1581, supplied by BGF Industries Inc, with a total quantity of 1,447 yards to be delivered FOB origin within 112 days of contract award. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego CA 92136-3581, with inspection and acceptance occurring at the destination point. The quantity is fixed with zero variance allowed, and packaging must comply with DLA Packaging Requirements for Procurement, MIL-STD-129 marking, and applicable federal standards, including ASTM D3951 for non-hazardous materials or TQ requirement IP025 if classified as hazardous under FED-STD-313. All technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence over any other standards. Palletization must adhere to RP001 guidelines, and the unit of issue is yard with corresponding commercial packaging per contract specifications. The solicitation number is SPE7M5-26-T-331N, issued on July 16, 2026, with a response deadline of July 27, 2026, and the original required delivery date is January 27, 2027, though the needed ship date is listed as November 17, 2026. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the point of contact is Corey Carter from the Department of Defense’s Active Devices Division.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

SEAL ASSEMBLYThe contract specifies the procurement of two units of a SEAL ASSEMBLY with NSN 1440-00-560-8390 under solicitation SPE4A6-26-T-04GQ, with a mandatory delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date depending on the acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs; unspecified attributes are treated as major. All work must comply with DLA packaging standards and the removal of government identification from non-accepted supplies. The item involves controlled technical data subject to ITAR or EAR, restricting export and disclosure to foreign persons without prior authorization, and access is limited to contractors with approved JCP certification, completed DOD export control training, and DLA approval. DFARS 252.225-7048 governs handling of this data. The solicitation was posted July 15, 2026, with responses due by July 20, 2026, under NAICS code 336419, and is managed by the Department of Defense’s ASC Commodities Division with Antonia Willcox as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CASE, LIFE RAFTThe contract specifies the procurement of 53 carrying cases for the LRU-34/A life raft used on V-22 aircraft, with the NSN 4220-01-533-2994 and part number 66106-105, manufactured exclusively by Air Cruisers Company, LLC under approved source designation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, including palletization as outlined in RP001. The item is designated as a critical application item and may involve covered defense information, requiring strict handling protocols. Delivery is due 150 days after award, with FOB origin, inspection and acceptance occurring at destination, and pricing is firm fixed with no variance allowed in quantity. All packaging and labeling must meet specified military standards and include the correct unit of issue and quantity per unit pack as defined in the contract. The government will receive the cases at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with transportation guided by DLAD procedural notes C19 and C20, and the delivery must be completed no later than May 2, 2027.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

COVER ASSY, RAM AIRThe contract pertains to the procurement of 10 units of a cover assembly for a ram air inlet with NSN 1730-00-811-3041, issued under solicitation SPE8EF-26-Q-0117. Delivery is required within 315 days of award, and the solicitation was posted on July 15, 2026, with responses due by July 27, 2026. The item is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with specific provisions for packaging, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. The supply involves technical data controlled under either ITAR or EAR, requiring strict compliance with U.S. export control regulations that restrict disclosure to foreign persons regardless of location. Only contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory DOD export control training and been formally authorized by DLA, may access or handle this controlled data. DFARS 252.225-7048 governs the protection and distribution of this information. The contract is classified as a federal procurement under the Department of Defense, with Russell Keiser designated as the primary point of contact for inquiries.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

AMPLIFIERThis contract solicitation, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair an AMPLIFIER under a firm-fixed-price, not-to-exceed, or estimated pricing structure. All bids must adhere to strict military standards including MIL-STD-130 for item marking, MIL-STD-2073 for packaging, and DFARS 252.211-7003 for Item Unique Identification (IUID). The repair turnaround time is fixed at 119 days from physical receipt of the asset as logged in the Commercial Asset Visibility system, and failure to meet this deadline triggers a per-unit, per-month price reduction, with the contractor required to specify the reduction amount and maximum cap. The contract mandates that only authorized repair sources may be awarded, and submission of proof of authorized distributor status is mandatory. All quotes must include detailed pricing, RTAT, cost breakdowns, expiration dates, facility CAGE codes, and explicit affirmation of the ability to meet throughput constraints. The solicitation includes a unilateral government option to increase the order by up to 100%—equivalent to two additional units—within 365 days of contract award, governed by FAR 52.217-6. Contract performance is subject to Navy CAV logistics and inspection protocols, with all repaired items requiring government final acceptance. Records of inspection and testing must be retained for one year post-delivery, and any design or part number changes require prior written approval from the Contracting Officer. Compliance with Buy American provisions, cybersecurity maturity model certification, and the mandatory use of Workflow Pro modules is required. The contract excludes test-and-evaluation-only quotes, and any items deemed beyond repair (BR/BER) may incur a limited negotiation-based fee capped at a specified amount. Responses must be submitted electronically by the deadline to the designated point of contact, and all documentation must conform to Navy distribution controls and security protocols, including NOFORN handling where applicable.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

All Up Round plus Canister Simulator (AURCS)The Naval Undersea Warfare Center Division Newport is seeking industry input through a Request for Information to assess capabilities for the future fabrication of the All Up Round plus Canister Simulator, a complex developmental system requiring advanced manufacturing, precision machining, and stringent welding standards. Respondents must demonstrate the capacity to handle large, heavy components with detailed facility infrastructure including lifting and assembly capabilities, along with proven expertise in large-scale precision machining and welding that meets strict military specifications. The future contract effort would involve producing a First Article Unit for validation through Manufacturing Readiness Review and Physical Configuration Audit, followed by recurring production of AURCS units and associated Peculiar Support Equipment, plus ongoing engineering change management and supply chain obsolescence mitigation. The government will provide the Technical Data Package and Statement of Work upon solicitation but currently seeks evidence of industry readiness through a white paper response no longer than ten pages, complemented by supporting visuals. Companies responding must provide a comprehensive company profile including CAGE code, UEI, size classification under NAICS 336419, and point of contact details, while explicitly addressing five key capability areas: facility infrastructure for handling heavy components, precision machining experience with tight tolerances on large assemblies, welding program certification and NDT inspection capabilities, ability to meet aggressive production schedules, and relevant past performance in naval or submarine-related fabrication projects. Two government contract references are required, and proprietary information must be clearly marked. All responses are due by August 14, 2026, submitted via email to designated Navy points of contact. Importantly, this RFI is not a solicitation, does not obligate the government to award a contract, and respondents bear all costs associated with their submission. Access to controlled attachments, including the draft Statement of Work and background slides, requires a SAM.gov role and formal request with justification, and all received information will be handled as Controlled Unclassified Information.

Nuwc Division Newport

POSTED

DEADLINE

First Article Testing (FAT) Preparation and ExecutionThe contract requires the production and delivery of a single test article for First Article Testing to confirm adherence to established design and production specifications, with delivery mandated within 180 days of award. This effort is classified as a subcontract under a Total Small Business Set-Aside, ensuring eligibility is limited to small businesses as defined by the SBA, and falls under the NAICS code 336419 which pertains to other transportation equipment manufacturing. The work is to be performed at Tinker Air Force Base with a zip code of 73145-8000, and the contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 14, 2026, with responses due by July 22, 2026, and is accessible through the DIBBS platform under the solicitation number SPE4A726T569G.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

COVER, LAUNCHER, CELLThe contract covers the procurement of eight units of a cover, launcher, and cell assembly under solicitation SPE4A6-26-T-05YX, with a total small business set-aside designation and a NAICS code of 336419. Delivery is required within 351 days after order, and the item is identified by NSN 1440-01-288-1879. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted items, and all hardware must be physically marked per RQ017. Mercury and mercury-containing compounds are strictly prohibited unless part of functional batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents, and portable devices containing mercury must be shock-proof with a secondary containment system as per NAVSEA 5100-003D. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Technical data associated with this item is subject to ITAR or EAR controls, restricting access and disclosure to authorized entities only. Access requires JCP certification, completion of DOD export-controlled data training, and approval from DLA, with DFARS 252.225-7048 applicable. The place of performance is New Cumberland, PA, and the primary point of contact is Ashley Sacolick with the ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract is for the procurement of 11 units of a cable assembly identified by NSN 1420-01-714-8893 under solicitation SPE4A6-26-T-06JS, with a delivery deadline of 171 days after contract award. It is governed by stringent technical and quality requirements referenced from the DLA Master List, including specific controls for inspection, acceptance at origin, and removal of government identification from non-accepted items. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access to associated technical data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally authorized. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization, and covered defense information protections apply. Packaging must adhere to DLA procurement standards, and tailored higher-level quality requirements are enforced for both manufacturers and non-manufacturers. The contract is managed by the Department of Defense’s ASC Commodities Division, with performance location in New Cumberland, Pennsylvania, and primary point of contact is Monica Greene.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract pertains to a cable assembly specified under NSN 1420-01-714-8784, with a quantity of seven units, and a required delivery within 171 days of award. The solicitation, numbered SPE4A6-26-T-06FP, was posted on July 14, 2026, with responses due by July 22, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The item is subject to stringent cybersecurity requirements, mandating that the supplier be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization. Technical data associated with this item is controlled under export regulations—either ITAR or EAR—making unauthorized disclosure or transfer to foreign persons, including foreign national employees or overseas subsidiaries, a violation. DFARS 252.225-7048 applies, and access to this data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program status, have completed mandatory DOD export control training, and have been formally authorized by DLA. Documentation for source approval, physical identification of items, and export control compliance are explicitly required. The place of performance is identified as New Cumberland, Pennsylvania, with Vincent Price listed as the primary point of contact for inquiries.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.

Deep Sea Passenger Transportation

POSTED

about 16 hours ago

DEADLINE

Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.

Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.

POSTED

about 16 hours ago

DEADLINE

Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.

Current-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE