Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Alternating Current Motor (NSN: 6105015754869)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of 53 units of an alternating current motor identified by NSN 6105015754869, manufactured and supplied in full compliance with Department of Defense logistics standards. All units must meet precise NSN specifications, including proper packaging and marking requirements to ensure traceability, readiness, and integration into military supply chains. The work is being executed under a subcontract aligned with NAICS code 335311, indicating focus on electric motor, generator, and transformer manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, with performance obligations tied to DoD logistical frameworks, though specific delivery location and point of contact details are not provided. The contract is accessible through the DIBBS system under award number SPE7M026V4749.

General Info

53 AC motors delivered per DoD standards under NSN 6105015754869 via DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 53 units of a specific alternating current motor per NSN specifications, including packaging, marking, and compliance with DoD logistics standards.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Convoluted Reinforce (NSN: 5975-00-602-5945)The contract requires the manufacture and delivery of 16 units of CONVOLUTE REINFORCE with part number CRN1137-3, a specialized electrical component designed for use in motor and generator systems. Each unit must meet precise military specifications and include full material traceability to ensure quality, reliability, and compliance with defense standards. The item is identified by the National Stock Number 5975-00-602-5945 and falls under the NAICS code 335311, which classifies the work within the Electrical Equipment and Appliance Manufacturing sector. The contract is structured as a subcontract under the Defense Logistics Agency, a division of the Department of Defense, and is intended to support military hardware needs through secure, standardized production practices. Although no specific delivery location or point of contact is provided, the procurement is tied to DLA’s award system and is listed with a public record link for tracking purposes. The solicitation was posted in July 2026, indicating this is a planned future procurement requiring timely preparation and adherence to defense manufacturing protocols.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Power Transformer Supply for DLAThe contract entails the supply of 16 military-specification power transformers, identified by NSN 5950-01-024-1940, to support operational requirements for the USS GUNSTON HALL. These transformers must meet strict military standards for performance, durability, and environmental resilience, and are subject to detailed packaging, labeling, and delivery protocols to ensure compatibility with Department of Defense logistics systems. The procurement is classified as a subcontract under the NAICS code 335311, indicating it is for electric transformer manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. The award is linked to contract SPE7M526P4096, with a posted date of July 20, 2026, signaling the anticipated timeline for award and fulfillment. Delivery is targeted to the USS GUNSTON HALL, requiring precise coordination to meet operational deployment schedules and compliance with defense supply chain regulations.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Manufacture of Special-Purpose Branched Electrical Cable AssemblyThe contract is for the design, fabrication, testing, and delivery of 23 specialized branched electrical cable assemblies that must meet stringent military specifications and comply with DLA technical requirements, including origin inspection to ensure adherence to sourcing and quality standards. The assemblies are classified as special-purpose components, indicating they are customized for unique operational environments or systems, and must be manufactured in full compliance with applicable defense industry protocols. The project is issued as a subcontract under the NAICS code 335311, which categorizes it within the Electrical Equipment and Wiring Assembly Manufacturing sector. Performance of the work is required at a designated location in Tracy, California, with a zip code of 95304-5000, and the solicitation was posted on July 20, 2026, with responses due by July 28, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense, indicating this is part of a larger defense logistics and supply chain initiative. All units must pass rigorous quality control and inspection processes prior to delivery, and the contractor is expected to demonstrate full capability in meeting technical, schedule, and compliance benchmarks without deviation.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Precision Optical Cable Assembly ManufacturingThe contract involves the manufacture of a military-specification optical cable assembly with part number ART-0500-X-X-G and NSN 6150017028231, designed for mission-critical defense applications where reliability, traceability, and durability are essential. The product must fully comply with all Department of Defense standards and DLA requirements, ensuring it meets the rigorous environmental, performance, and quality criteria necessary for operational use. Full component traceability and adherence to defense-grade manufacturing processes are non-negotiable, with strict documentation and control measures required throughout production. The solicitation is issued as a subcontract under NAICS code 335311 by the ASC Commodities Division of the Department of Defense, with performance required at Camp Lejeune, North Carolina, zip code 28542-0105. The opportunity was posted on July 20, 2026, and responses are due by July 28, 2026, leaving a narrow window for qualified suppliers to submit proposals. The contract details are accessible via the DIBBS platform, and potential bidders must demonstrate proven capability in producing defense-certified optical assemblies, with experience in meeting stringent military specifications and supporting defense logistics systems.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

Magnetic Contactor Manufacturing & SupplyThe contract involves the manufacturing and supply of eleven magnetic contactors conforming to the National Stock Number NSN 6110011235125 and applicable military specifications, intended for delivery to the Defense Logistics Agency’s San Joaquin location. The work is classified as a subcontract under the NAICS code 335311, which corresponds to the manufacturing of electric motors and generators, indicating that the contractor must meet rigorous defense-grade standards for performance, durability, and environmental resilience. Although the solicitation number and specific point of contact are not provided, the contract was posted on July 20, 2026, signaling an active procurement timeline within the Department of Defense infrastructure. Performance is expected to support military operations through reliable electrical control components, with no set-aside type specified, meaning the award is open to all qualified vendors regardless of business size or ownership characteristics.

Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

Cable Assembly Manufacturing & TestingThe contract calls for the full-scale production of military-spec cable assemblies requiring precise crimping, termination, shielding, and comprehensive electrical testing to verify continuity and dielectric strength. All work must adhere to stringent defense standards to ensure reliability under harsh operational conditions. The place of performance is fixed at New Cumberland, Pennsylvania, with the contract issued under NAICS code 335311 for electrical component manufacturing. This is a subcontract opportunity under the Department of Defense’s ASC Commodities Division, with responses due by July 28, 2026. The solicitation is open through the DIBBS portal and requires full compliance with military-grade specifications for materials, processes, and testing protocols.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

CONTACTOR, MAGNETICThe contract is for the procurement of two magnetic contactors with NSN 6110012173945 and part number 4281003-9, supplied by Whipp & Bourne Inc. DBA and Whipp & Bourne Associates LLC. Delivery is required within 168 days FOB origin, with a firm delivery deadline of April 19, 2027, and an initial ship date of January 5, 2027. The item is subject to strict packaging compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, and must be palletized per DLA packaging requirements. ESD and EMI protection are mandatory, requiring packaging materials certified under MIL-PRF-81705, specifically Type I and Type III barrier materials, sourced only from manufacturers listed on QPL-81705. Components with leads or terminals must be protected against physical damage and electrostatic discharge through appropriate cushioning and container design. The contract prohibits intentional addition of mercury or mercury-containing compounds except for specified functional uses in batteries, lamps, instruments, sensors, controls, weapon systems, and chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at destination with zero variance allowed in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements incorporated by reference, applicable as of the solicitation issue date. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with the procurement managed under contract number SPE7M1-26-T-193H, a federal solicitation issued by the Department of Defense, Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

TRANSFORMER, POTENTIThe contract pertains to the procurement of three transformers designated by NSN 5950-01-167-4976 under solicitation SPE4A5-26-T-296P, with a delivery requirement of 165 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to stringent documentation and compliance controls including source approval requests, configuration change management via engineering change proposals, and variance requests for deviations. Packaging must adhere to DLA standards, and physical identification of the item must follow specified marking protocols. Sampling and inspection are to conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs corresponding to critical, major, or minor classifications. The transformer contains technical data subject to export controls under either ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, regardless of location. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export-control training, and explicit approval from DLA. DFARS 252.225-7048 governs compliance with export restrictions. Measuring and test equipment must meet RT001 requirements, and government identification must be removed from non-accepted supplies as per RQ011. Although item unique identification is not required per the Service customer’s request, DFARS 252.211-7003(c)(1)(i) remains applicable. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance at Hill AFB, and inquiries should be directed to Danielle Richardson at the provided contact details.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

COIL, ELECTRICALThis contract is for the procurement of 44 electrical coils with NSN 5950-01-411-9561 and part number 851019-024VDC, supplied by approved vendors including AMZ ALABAMA INC., PARKER-HANNIFIN CORPORATION, and BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP. The item is classified as critical application and must comply with strict restrictions on mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware except in specific exempted cases such as functional use in batteries, fluorescent lights, instrument sensors, weapon systems, or chemical reagents specified by NAVSEA. Any portable devices containing mercury must be shock-proof and include a secondary containment barrier as mandated by NAVSEA 5100-003D. The contract requires full adherence to DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit packaging codes, with marking fully aligned to MIL-STD-129 and no special marking required. Delivery is FOB origin with a strict 168-day lead time, and the required delivery date is February 14, 2027. The item must be shipped to the designated DLA distribution center in Tracy, California, with transportation procedures governed by DLAD Proc Note C19 and C20. No quantity variance is permitted, and inspection and acceptance will occur at the destination. The purchase request number is 7017439165, and the total contract value is $1,936 at $44.00 per unit. The solicitation was issued under contract number SPE7L4-26-T-5526 with a response deadline of July 23, 2026, and is classified under NAICS code 335311 for electrical equipment manufacturing.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

POWER SUPPLYThe contract pertains to the procurement of 45 power supply units identified by NSN 6120-01-705-6913 under solicitation SPE7M1-26-T-220J, with a delivery deadline of 181 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to source-controlled drawing requirements, meaning only the approved sources listed on the drawing are currently authorized, though additional approved sources may exist and have not yet been reflected. Offerors seeking future qualification must contact the cognizant design activity specified on the drawing. Configuration changes require formal engineering change proposals and variance requests. Cybersecurity compliance mandates CMMC Level 2 certification, either through a self-assessment or third-party assessment by a certified organization. Technical data associated with the item is subject to strict export controls under ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization; access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and DLA authorization. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Michael Reese at the provided DLA contact information.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

ALARM SET, PERSONNELThe contract solicitation SPE4A6-26-T-05JV is a Small Business Set-Aside for the procurement of 14 units of ALARM SET, PERSONNEL HAZARD with National Stock Number 6350-01-421-0501 and manufacturer part number 96UD8BU-115 from HOSE-MCCANN TELEPHONE CO, INC. The item must be delivered FOB origin to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with a required delivery date of January 26, 2027, and a 189-day delivery lead time. Quantity is fixed with zero variance allowed. All packaging must conform to MIL-STD-2073-1E with specific preservation codes, unit and intermediate containers marked as E5, and packaging code U. Marking must comply with MIL-STD-129 without special marking codes, and palletization must adhere to DLA’s RP001 packaging requirements. The contractor must ensure mercury or mercury-containing compounds are not intentionally added or in direct contact with the hardware except for approved functional uses such as batteries, fluorescent lights, sensors, weapon systems, and NAVSEA-specified reagents; portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection at destination follows MIL-STD-1916, ASQ H1331 Table 1, or a zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Acceptance requires zero non-conformances if MIL-STD-105/ASQ Z1.4 is used. The contract includes mandatory clauses from DFARS and FAR covering whistleblower rights, cybersecurity safeguards including safeguarding covered defense information and cyber incident reporting, prohibition on toxic materials, restrictions on mandatory arbitration, and requirements for small business subcontractor payment acceleration. The contractor must register and maintain current representations in SAM, comply with Berry Amendment and Buy American Act thresholds, and submit all quotes through the DIBBS portal. Invoicing and receiving reports must be processed electronically via WAWF using the provided routing data, and all hazardous materials must be labeled in accordance with OSHA's Hazard Communication Standard unless exempted under federal

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

TRANSFORMER, POWERThe contract pertains to the procurement of three power transformers identified by NSN 5950014210532, with a total quantity of 23 units distributed across three line items: three units to be delivered to Jacksonville, Florida; three units to New Cumberland, Pennsylvania; and seventeen units to San Diego, California. Each unit is priced at $3.00, with no variance allowed in quantity and delivery required within 53 days under FOB origin terms. All items must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking requirements, and DLA packaging directives, including specific containment and palletization protocols. The transformers must not contain or come into contact with mercury or mercury compounds except in narrowly defined functional applications such as batteries or instrumentation specified by NAVSEA, and any portable devices containing mercury must have shockproof construction and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and transportation logistics follow DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7M1-26-T-198L with a response deadline of July 23, 2026, and is classified under NAICS code 335311 for transformer manufacturing. All supplies are subject to the DLA Master List of Technical and Quality Requirements, with revisions effective at the time of solicitation or award.

MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 17 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 17 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 17 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE