Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Aluminum Raw Materials & Stock

Active

Federal

Response Deadline08/28/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of aluminum plate, sheet, or extrusions compliant with MIL and ASTM specifications, requiring full material traceability and certified mill test reports to ensure defense-grade quality standards. All deliveries must adhere to defense-compliant logistics protocols, ensuring proper handling, documentation, and chain of custody throughout the supply chain. The requirement is structured as a subcontract under a Small Business Set Aside, designated for total small business participation, with the North American Industry Classification System code 423510 indicating a focus on merchant wholesalers of metals and minerals. The solicitation is issued by the Department of Defense through the W6QK Lad Contr Office, with performance expected to occur in Chambersburg. Interested parties must submit proposals by the deadline of August 28, 2026, with the opportunity posted on SAM.gov on July 31, 2026.

General Info

Supply defense-grade aluminum per MIL/ASTM with traceability, small business set aside, delivery to Chambersburg by Aug 28, 2026.

Agency

Department Of Defense → W6QK Lad Contr OfficeView Agency

NAICS

423510 - Metal Service Centers and Other Metal Merchant WholesalersView NAICS

Place of Performance

Chambersburg, PA, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 28

Submission deadline

Response Deadline

08/28/2026, 04:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Lad Contr Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W6QK Lad Contr Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of aluminum plate, sheet, or extrusions per MIL/ASTM specifications with full traceability, CMTRs, and defense-compliant logistics.

Similar Contracts

Same NAICS industry code

Construction Materials Supply (Steel, Redwood, Resin, Epoxy)The contract entails the supply of galvanized steel, redwood slats, epoxy resin, and stainless steel components required for on-site fabrication and installation by a subcontractor working with the California Department of Parks & Recreation. Materials must meet specified quality and durability standards to ensure structural integrity and weather resistance in outdoor park environments, particularly in Contra Costa County where the work will be performed. The subcontractor is responsible for delivering all materials in accordance with project timelines and installation requirements, with no set-aside provisions designated for small or minority-owned businesses. The solicitation was posted on July 31, 2026, and responses are due by September 2, 2026, with the North American Industry Classification System code 423510 indicating a focus on merchant wholesalers of construction materials. All materials must be suitable for integration into permanent outdoor structures, and the subcontractor is expected to coordinate with on-site teams to ensure timely and accurate delivery. The contract is non-competitive in nature and tied directly to park infrastructure projects under the oversight of the California Department of Parks & Recreation, with no designated point of contact provided in the public posting.

California Department of Parks & Recreation

POSTED

DEADLINE

in about 1 month

Pallet Rack Component Supply (Beams, Uprights, Decking)The Texas Department of Criminal Justice is seeking suppliers to provide individual steel components for selective pallet racking systems, including load beams, upright frames, and wire decking, to be used across its facilities. The contract is structured as a subcontract under NAICS code 423510, which pertains to wholesale trade of machinery and equipment, and is open for response until August 14, 2026. All components must meet the technical and quality standards required for institutional use in correctional environments, ensuring durability, safety, and compliance with operational demands. The place of performance and delivery specifics are not detailed, but the equipment will be distributed to TDCJ locations throughout Texas. The solicitation was posted on July 31, 2026, and interested parties can access further information through the Texas SmartBuy portal. There is no set-aside designation or small business preference indicated, meaning all eligible vendors may compete regardless of size or status. While the office address and point of contact details are unspecified, bidders are expected to coordinate directly through the provided link for requirements, documentation, and submission guidelines. Delivery timelines, certification requirements, and installation support are likely outlined in the full solicitation materials, which potential suppliers should review prior to submitting a bid.

Texas Department of Criminal Justice

POSTED

DEADLINE

Supply of Raw Materials and Components for Door AssemblyThe contract is for the supply of raw materials including steel, aluminum, seals, hinges, and gaskets required for the fabrication of military vehicular cab doors, with strict adherence to hazardous material labeling and packaging standards to ensure safety and regulatory compliance. All materials must meet the technical specifications necessary for use in defense applications, and the supplier is expected to deliver components that integrate seamlessly into the door assembly process without requiring additional modification. This is a total small business set-aside subcontract under the SBA program, exclusively available to small businesses, with the NAICS code 423510 indicating the scope pertains to wholesale trade of building materials. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, and performance will be centered at the facility in New Cumberland, Pennsylvania, zip code 17070-5002. The contract falls under the Department of Defense’s Land Supplier Operations Vehicle Support organization, with all submissions required through the DIBBS platform.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Materials Supply for Metal FabricationThe contract calls for the supply of certified raw metal stock, including alloys and stainless steel bars, dedicated exclusively to defense-grade fabrication processes. All materials must be fully traceable with comprehensive material test reports ensuring compliance with stringent military specifications, guaranteeing structural integrity, chemical composition, and mechanical performance. The procurement is issued as a subcontract under the NAICS code 423510, with performance required at 98314-6001 in Bremerton, Washington, indicating the materials will be delivered directly to a Defense Department fabrication or assembly site. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense under the LAND SUPPLIER OPNS VEHICLE SPT office, emphasizing the critical nature of component sourcing for defense vehicle systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Sustainable & Specialty Metal ComplianceAll materials supplied under this contract must strictly comply with DFARS specialty metals restrictions, requiring verified sourcing from qualified domestic or allied nations and proper certification to prove compliance. Additionally, the contracting entity must adhere to FAR sustainable product requirements, ensuring all goods meet environmental and economic sustainability standards throughout the supply chain, including responsible material sourcing and documentation. The subcontract is tied to a performance location in Frankfort, Kentucky, with a response deadline of August 10, 2026, and falls under NAICS code 423510 for wholesale trade of building materials. The solicitation is managed by the Department of Defense through its Land Supply Chain organization, with all submissions subject to federal procurement regulations governing both material origin and environmental impact.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Metal Raw Materials & Components SupplyThe contract seeks the supply of military-grade steel, fasteners, and welding materials to fabricate skid containers with full traceability and comprehensive documentation, ensuring compliance with defense procurement standards. All materials must meet stringent military specifications, and the supplier is required to provide complete material certifications and chain-of-custody records to guarantee authenticity and quality throughout the supply chain. The fabrication of the skid containers must adhere to technical and operational requirements necessary for use in demanding military environments. Subcontracted under the Department of Defense, this procurement is associated with the NAICS code 423510 and has a performance location in Corpus Christi, Texas, with a zip code of 78419-5255. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The contract falls under a subcontract category and is accessible through the DIBBS system, and interested parties must ensure full compliance with documentation and delivery timelines to meet defense operational readiness standards.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8E4-26-Q-0337

The contract specifies the procurement of 24 feet of steel bar, composition 303, cold finished, hexagon shaped, annealed, with a width of 0.875 inches across flats and a length requirement of exactly 10, 11, or 12 feet in whole-foot increments, weighing approximately 2.307 pounds per foot. All material must conform to technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, including compliance with ASTM A582/A582M, SAE AMS2806, and CDRL-METALSCERT, with a mandatory Certificate of Quality Compliance provided with each shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer details, heat and lot numbers, and dimensions, using only stamping or stenciling methods that are legible, permanent, waterproof, and non-contaminating; adhesive labels are permitted for bars under 0.250 inches in nominal outer diameter. Packaging must adhere to MIL-STD-2073-1E and ASTM A700, with special codes ZZ and Z applied for preservation and marking, and all shipments must follow MIL-STD-129 labeling. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD), and deviations from this requirement constitute an unauthorized substitution with potential criminal penalties. Pricing is firm fixed, with no variance allowed in quantity, inspection and acceptance occur at destination, and delivery is due within 30 days after award. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified Tobyhanna Army Depot address in Pennsylvania.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0638

The contract is for the procurement of corrosion-resistant steel sheet, AMS 5517 alloy 301, solution heat treated, cold rolled, descaled, with a thickness of 0.032 inch, width of 36 inches, and length in whole feet increments only. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Every unit must be permanently marked with the DLA contract delivery order number, NSN, specification number and revision, grade, class, type, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions using stamped or stenciled characters that are legible, waterproof, and non-contaminating. Adhesive labels are required for bars, tubes, and shapes under 0.250 inch nominal OD, and tags are acceptable for wire. Material must conform to the specified length requirements and be shipped in full-foot lengths only. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including robust edge and corner protection, full top and bottom coverage with fiberboard or better, and marking consistent with MIL-STD-129. The contract mandates identification of both units of measure on shipment markings when applicable. The product must be supplied by a distributor or manufacturer listed on the Qualified Suppliers List for Distributors (QSLD), and any deviation from this requirement constitutes an exception and may result in rejection or criminal penalties. All shipments are to be delivered to designated DLA depots at San Diego, Tinker AFB, or Robins AFB within 90 days of award, with FOB origin, firm fixed pricing, and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and documentation referenced in the Technical Data Package, including CDRL-METALSCERT, must be adhered to.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

FILAMENT, METAL

Solicitation # SPE8E4-26-Q-0341

The contract pertains to the procurement of 5 units of metal filament identified by NSN 9630-01-688-1442 under solicitation SPE8E4-26-Q-0341, issued by the Defense Logistics Agency. The seller, CARAHSOFT TECHNOLOGY CORP, must supply the item at a firm fixed price with no variance allowed in quantity, and delivery is required within 30 days after the award date. Inspection and acceptance occur at the destination, with FOB origin terms applying. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing RP001 for packaging standards, MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is hazardous—in which case FED-STD-313 and TQ requirement IP025 govern. Palletization must adhere to RP001, and all packaging must reflect the designated unit of issue and quantity per unit pack. The shipment must be sent via traceable courier services, excluding parcel post, to the specified military delivery address at Fort Campbell, Kentucky. The item is designated for government use with a material need date of December 19, 2025, and is associated with project code 9AC TP 1 and a tracking control number. Technical and quality specifications referenced in the contract are drawn from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. All documentation must align with the DLA’s standardized format, including proper marking, labeling, and compliance with defined unit of issue standards as outlined in the official DLA Excel guide. The point of contact for the contract is Leslie Morales-Zera, and the solicitation was posted on July 30, 2026, with responses due by August 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Steel Post and Hardware SupplyThe contract involves the supply of galvanized steel posts, blocks, and hardware required for the installation of a guardrail system in Napa, California, under the jurisdiction of the County of Napa. All materials must meet specified quality and durability standards to ensure long-term performance in outdoor conditions, with delivery and compliance expected by the response deadline of August 25, 2026. The contract is classified as a subcontract under NAICS code 423510, indicating it falls within the wholesale trade of construction materials, and performance is designated to occur within the 94559 zip code area. Respondents must be prepared to fulfill all material requirements without exception, as the scope is focused solely on procurement and does not include installation services. The solicitation is open to qualified suppliers capable of providing certified galvanized steel components that align with industry safety and structural specifications for guardrail systems. While no set-aside provisions or agency-specific contracting preferences are indicated, all submissions must be received prior to the deadline, and interested parties should access the official bidding portal via the provided URL to review full technical requirements and submission guidelines.

County of Napa, CA

POSTED

DEADLINE

Steel Casing and Well Screen Materials SupplyThe contract requires the supply of ASTM-compliant 20-inch steel casings and well screens designed for use in monitoring wells, with all materials must meet the environmental standards set by the Florida Department of Environmental Protection. The materials are intended for installation in groundwater monitoring systems and must adhere strictly to industry specifications to ensure structural integrity, corrosion resistance, and long-term performance in Florida’s environmental conditions. All submissions must demonstrate full compliance with ASTM standards and Florida DEP requirements to be considered for award. The solicitation was posted on July 29, 2026, and responses are due by September 1, 2026, under a subcontract type. The contracting entity is the Northwest Florida Water Management District, operating under the state of Florida, with the NAICS code 423510 indicating the classification for metal service centers and related activities. There is no set-aside designation, and the place of performance has not been specified, but delivery and installation will occur within Florida’s monitoring well network. All vendors must ensure timely submission and full material compliance to meet project needs, with no point of contact provided in the posting and further details available through the designated vendor portal.

Northwest Fla Water Management Dist

POSTED

DEADLINE

in about 1 month

BOLTED- CLAMPS, DEADEND, SPLICES (TD:M9-3)

Solicitation # 1017704

Saskatchewan Power Corporation is seeking bids for the purchase and delivery of bolted clamps, deadends, and splices under solicitation number 1017704 titled BOLTED-CLAMPS, DEADEND, SPLICES (TD:M9-3). The tender was posted on MERX on July 29, 2026, with a mandatory response deadline of August 19, 2026, at 9:00 PM Saskatchewan time. All relevant documents, including amendments, addenda, and clarifications, will be published exclusively on MERX, and bidders are responsible for regularly checking the portal for updates. A downloadable Word version of the Invitation to Tender is available, but in the event of contradictions, the PDF version shall govern. The goods are to be delivered to locations within Saskatchewan, and primary point of contact for inquiries is Benjamin Armbruster, reachable at 306-566-3115. Bidders must review all specifications carefully and ensure compliance with technical and procedural requirements outlined in the tender documentation.

Saskatchewan Power Corporation

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QK Lad Contr Office

Same awarding agency

Supply of Containerized Kitchen Light Kits (Weatherhaven Part #147820)The contract entails the procurement and delivery of 39 units of the commercial off-the-shelf Containerized Kitchen Light Kit, identified by Weatherhaven Part #147820, with delivery terms set at FOB destination to Letterkenny Army Depot in Pennsylvania. No installation, integration, or additional services are required beyond the straightforward delivery of the kits. The solicitation is categorized as a subcontract under a Small Business Set Aside, fully reserved for small businesses, and falls under NAICS code 335132 for lighting equipment manufacturing. The offer response deadline is August 14, 2026, with the opportunity posted on July 31, 2026, and the place of performance listed as Chambersburg, Pennsylvania, with a zip code of 17201. The contracting office is the W6QK Lad Contr Office under the Department of Defense.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Quality Assurance & ISO 9001/AS9100 ComplianceThe contract encompasses independent quality assurance oversight, internal audits, non-conformance management, and comprehensive documentation to ensure strict adherence to ISO 9001 or AS9100 quality management standards. This effort is critical for maintaining compliance in a defense-related environment and supports the integrity of processes across manufacturing and service delivery. The work is structured as a subcontract under a Small Business Set Aside, with the North American Industry Classification System code 541611 indicating management, scientific, and technical consulting services. Performance is required in Chambersburg, and the opportunity is open exclusively to small business concerns as defined by the SBA. The solicitation was posted on July 31, 2026, with a response deadline of August 28, 2026, providing a four-week window for proposal submissions. The contracting activity is managed by the Department of Defense through the W6QK Lad Contr Office, though specific office and contact details are not provided. The absence of a designated point of contact suggests that all inquiries must be directed through the official SAM.gov portal linked in the documentation. This contract requires a thorough understanding of aerospace and defense quality requirements, with an emphasis on systemic compliance, audit readiness, and documented corrective actions to sustain certification under AS9100 or ISO 9001.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Environmental & Structural Testing (MIL-STD-810)This contract solicits subcontracting services to perform environmental and structural testing on components in accordance with MIL-STD-810 standards, encompassing vibration, thermal cycling, humidity exposure, and shock testing to evaluate durability under extreme conditions. The work is designated as a Small Business Set Aside under the SBA program, ensuring opportunities for small businesses, and is classified under NAICS code 541380 for other scientific and technical consulting services. The testing activities are required to be conducted at the place of performance in Chambersburg, with the Department of Defense through the W6QK Lad Contr Office as the responsible agency. All responses must be submitted by the deadline of August 28, 2026, and the opportunity was posted on July 31, 2026, providing potential bidders approximately four weeks to prepare and submit proposals.

Testing Laboratories and Services

POSTED

DEADLINE

Epoxy Bonding & Adhesive Assembly (MIS-21030)This contract pertains to the structural bonding of subassembly components using two-part epoxy adhesives in accordance with specification MIS-21030, requiring execution in a controlled clean room environment to ensure precision and cleanliness standards. The work involves precise application, curing, and quality control of adhesive bonds critical to structural integrity, necessitating trained personnel and adherence to specified material and process controls. All activities must comply with the technical requirements of MIS-21030, with emphasis on consistency, contamination prevention, and documented compliance throughout the assembly process. The contract is designated as a Small Business Set Aside under NAICS code 332999 and is issued by the Department of Defense through the W6QK Lad Contr Office. It was posted on July 31, 2026, with a response deadline of August 28, 2026, at 4:00 PM. The place of performance is designated as Chambersburg, though no specific address is provided. The solicitation is structured as a subcontract and is only eligible for small business concerns, emphasizing support for small business participation in defense-related manufacturing activities.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Chemical Conversion Coating (MIL-DTL-5541)The contract requires the application of chromate or non-chromate chemical conversion coatings on aluminum components in accordance with MIL-DTL-5541 Class 1A specifications to provide corrosion protection and maintain electrical conductivity. This work is targeted at aluminum parts used in defense applications where surface treatment must meet rigorous military standards for durability, adhesion, and performance under environmental stress. The coating process must ensure consistent quality across all components, with strict adherence to the technical requirements of the specification, including preparation, application, rinsing, drying, and inspection procedures. This is a small business set-aside subcontract under the NAICS code 332812, indicating it is reserved for small businesses in the metal finishing industry. The opportunity is managed by the Department of Defense through the W6QK Lad Contr Office, with performance expected to take place in Chambersburg. Respondents must submit proposals by August 28, 2026, following the solicitation posted on July 31, 2026. The nature of the work demands precise execution, compliance with federal defense standards, and the ability to qualify and validate coating results through established testing protocols to ensure full conformance to MIL-DTL-5541 Class 1A requirements.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision CNC Machining of Aluminum ComponentsThe contract calls for high-precision CNC machining of aluminum door subassemblies to stringent military specifications, requiring advanced milling, drilling, and finishing operations to meet tight tolerances. The work is classified as a subcontract under a Small Business Set Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332721 indicating the focus on metal working machinery and precision fabrication. Performance of the contract is centered in Chambersburg, and all work must align with military drawings and quality standards without room for deviation. The solicitation was posted on July 31, 2026, with a firm response deadline of August 28, 2026, at 4:00 PM. The awarding organization is the W6QK Lad Contr Office under the Department of Defense, indicating this is a defense-related procurement. While specific point of contact information is not provided, interested parties must submit proposals through the official SAM.gov portal prior to the deadline. The requirement demands proven capability in precision machining for defense applications, with emphasis on material integrity, dimensional accuracy, and compliance with military-grade documentation.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Containerized Kitchen Light kits

Solicitation # W911N226QA065

This procurement is a combined synopsis and solicitation under FAR Part 12 for 39 units of Weatherhaven part number 147820, Containerized Kitchen Light Kits, issued as Request for Quotation W911N2-26-Q-A065. The acquisition is fully set aside for small business concerns with no portion reserved for large businesses, and it falls under the Product Service Code 6210 for indoor and outdoor electric lighting fixtures, with a NAICS code of 335132 for commercial, industrial, and institutional electric lighting fixture manufacturing. The solicitation does not require a separate written document, as it serves as the complete and sole source of requirements, incorporating all applicable provisions and clauses by reference, accessible electronically via acquisition.gov. Offers must be submitted by August 14, 2026, at 4:00 PM, with anticipated award scheduled for September 1, 2026. The requirement is managed by the Department of Defense through the W6QK Lad Contr Office located in Chambersburg, Pennsylvania, with performance anticipated at the same location. Primary point of contact is Thomas C. Hall, reachable at 717-267-5583 or thomas.c.hall111.civ@army.mil, with Danielle Rhone as the secondary contact at 717-267-8480 or danielle.r.rhone.civ@army.mil. All proposals must comply with the solicitation procedures outlined at FAR 12.201-1(c)(1), and the full details of the requirement, submission guidelines, and evaluation criteria are available through the provided SAM.gov link. The process is streamlined under the commercial acquisition streamlined procedures, with no pre-solicitation conference required and all information contained within this single document.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Fabrication of Door Subassemblies

Solicitation # W911N226QA063

This solicitation, numbered W911N2-26-Q-A063, is a combined synopsis and request for quotation for an indefinite delivery indefinite quantity (IDIQ) contract to fabricate door subassemblies according to specified drawings. The acquisition is exclusively set aside for small business concerns under a total small business set-aside and follows the streamlined procedures of FAR Part 12 for commercial items. The Product Service Code is 5342 for hardware and weapon systems, and the North American Industry Classification System code is 332999, classifying the work under miscellaneous fabricated metal product manufacturing. Offers must be submitted by the response deadline of August 28, 2026, with an anticipated award date of October 1, 2026. The solicitation serves as the only document required for submission, as no separate written solicitation will be issued. The contract is managed by the W6QK Lab Contract Office under the Department of Defense, located in Chambersburg, Pennsylvania. Proposals must be directed to the designated point of contact, Thomas C. Hall, with Bobie J. Burkett as the secondary contact, using the provided phone and email addresses. Performance of the work is expected to occur in Chambersburg, Pennsylvania. All relevant provisions and clauses are incorporated by reference and available electronically at www.acquisition.gov. Interested small businesses are encouraged to review the full details via the official SAM.gov link provided in the solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

HVAC System InstallationThe contract pertains to the installation of heating, ventilation, and air conditioning systems, including all associated ductwork and equipment, under a subcontract arrangement. The work is scoped for performance in Chambersburg, Pennsylvania, with a ZIP code of 17201, and is classified under NAICS code 238220, which corresponds to mechanical contractors specializing in HVAC systems. The solicitation was posted on July 27, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time. The contracting office is listed as the W6QK Lad Contr Office under the Department of Defense, indicating this project supports a defense-related facility or requirement. There is no set-aside designation specified, and no point of contact details are provided in the contract data. The opportunity is accessible through the SAM.gov workspace link for further information and submission procedures.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Earthwork and Site GradingThe contract titled Earthwork and Site Grading involves the excavation, grading, and compaction of a site to prepare the foundation and access roads for a construction project. The work is designated under NAICS code 237990 and is structured as a subcontract opportunity posted by the W6QK Lad Contr Office under the Department of Defense. Performance of the work is required at a location in Chambersburg, Pennsylvania, with the zip code 17201. The solicitation was made available on July 27, 2026, and responses must be submitted no later than August 7, 2026, at 9:00 PM Eastern Time. There is no set-aside designation specified for this contract, and no point of contact information is provided in the details. All work must conform to the technical and logistical requirements necessary to support facility construction with proper site preparation, including compliance with soil compaction standards and grading specifications for foundation and road access.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Structural Steel ErectionThe contract involves the fabrication and erection of a structural steel framework for a hangar building, classified under NAICS code 238120 as a subcontract. The work is to be performed in Chambersburg, Pennsylvania, with a zip code of 17201, and is sponsored by the Department of Defense through the W6QK Lad Contr Office. The opportunity was posted on July 27, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time. No set-aside type is specified, indicating this contract is open to all eligible contractors without preference given to small businesses or other categories. The place of performance is clearly defined, but no point of contact or detailed agency address is provided in the data. The full details and submission portal can be accessed through thesam.gov workspace link associated with the opportunity.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

Concrete Foundations and SlabsThe contract titled Concrete Foundations and Slabs involves the full scope of concrete work including forming, reinforcing, pouring, and finishing for foundations, slabs, and structural elements. This subcontract is issued under NAICS code 238110 and is managed by the W6QK Lad Contr Office under the Department of Defense with performance required in Chambersburg, Pennsylvania, at ZIP code 17201. The solicitation was posted on July 27, 2026, and responses must be submitted by August 7, 2026, at 9:00 PM Eastern Time. No set-aside type or description is specified, and no point of contact information is provided in the posting. Interested parties must review the full opportunity through the provided SAM.gov link to ensure compliance with all technical and administrative requirements.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE