This Government Contract opportunity from Government of Canada was posted on June 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Antifriction Bearings (Non-Precision)

Closed

International

Submission Closed06/25/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332996

New

Federal

28--LEVER PLATE SPECIALThe Government is seeking to procure three units of the NSN 1H-2825-014815072-X3, identified as a 28–LEVER PLATE SPECIAL, under a sole-source contract authorized by FAR 6.302-1 due to the unavailability of competitively sourced alternatives. The Government does not own or have access to the technical data rights necessary to procure repairs or replacements from other sources, and both acquiring those rights and reverse engineering the part have been deemed uneconomical. Deliveries are required to two designated locations: W25G1U at DLA Distribution in New Cumberland, Pennsylvania, and W62G2T at DLA Distribution in Tracy, California. Although this notice is not a request for competitive bids, interested parties may submit capability statements or proposals within 45 days of the publication date, or 30 days if awarded under an existing Basic Ordering Agreement, to be considered for award. The Government reserves the right to determine whether competition is feasible based on submissions and will only award if the offeror, product, or manufacturer meets all qualification requirements at the time of award, as per FAR clause 52.209-1. Market research confirms that the acquisition does not fall under FAR Part 12 commercial item procedures, though vendors may still indicate if they can provide an equivalent commercial item within 15 days of notice. All inquiries and qualification details must be directed to the primary point of contact, Melissa A. Farness, at NAVSUP Weapon Systems Support Mech in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Mechanical Seal and Gasket SupplyPetrojam Limited, acting on behalf of the Government of Jamaica, has issued a subcontract for the supply of high-performance mechanical seals, O-rings, gaskets, and sealing materials designed specifically for use in pump systems operating in petroleum and chemical service environments. The contract is classified under NAICS code 332996, indicating it pertains to other fabrication industries related to machinery and components, and emphasizes the need for durable, chemically resistant, and high-pressure-rated sealing solutions that meet the rigorous demands of industrial processing and offshore operations. All materials must be fully compatible with aggressive fluids, elevated temperatures, and continuous operational conditions typical in energy and petrochemical applications. The contract was posted on July 25, 2026, and is accessible via the Government of Jamaica’s electronic procurement portal, with no set-aside or small business preferences indicated. Performance is expected to support operations within Jamaica’s energy infrastructure, though specific delivery locations or performance metrics are not detailed in the available data. Contractors must ensure compliance with industry standards for material integrity, leakage prevention, and long-term reliability, with no point of contact listed for inquiries, suggesting all communications must be handled through the official e-procurement platform linked in the notice.

POSTED

DEADLINE

Manufacturing of Quick Disconnect Coupling Half (NSN 4730-01-399-0241)The contract entails the full-scale manufacturing of a military-specification quick disconnect coupling half, adhering strictly to Army Drawing 19207-12342947 and SQAP013990241, ensuring compliance with all defense-grade quality and performance standards. Production must encompass not only the fabrication of the component but also integrated surge and sustainment planning to support long-term operational readiness and logistics requirements for the U.S. military. The item is designated by NSN 4730-01-399-0241 and falls under NAICS code 332996, indicating specialized manufacturing within the defense supply chain. This is a subcontract opportunity issued by LAND SUPPLIER OPERATIONS SMSG under the Department of Defense, with a response deadline of August 23, 2026, and a posted date of July 24, 2026. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors, and no point of contact or place of performance details are provided. All production activities must meet rigorous military specifications, and successful proposers are expected to demonstrate capacity for consistent, high-volume output, quality assurance, and supply chain reliability to sustain operational needs over time.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Defense-Grade O-Ring Supply and DeliveryThe contract requires the manufacture or procurement, packaging, and delivery of 130 defense-grade O-rings identified by NSN 5331015349099, meeting exact military specifications for use by the Department of Defense. The delivery must be made FOB origin to DLA New Cumberland, with a strict deadline of 161 days from the date of order issuance. The procurement is categorized as a subcontract under NAICS code 332996, indicating a specialized manufacturing process aligned with defense standards. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002. All work must ensure full compliance with defense-grade requirements and be completed within the established timeline to satisfy operational needs.

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling (Supplier Opportunity)The contract requires suppliers to provide PIN-RIVET hardware components that meet stringent military packaging and labeling standards, ensuring full compliance with federal regulations for hazardous materials. All shipments must include accurate hazardous materials disclosures and proper GHS labeling where applicable, aligning with Department of Defense requirements for safety and traceability throughout the supply chain. The components are destined for performance at Hill Air Force Base with a zip code of 84056-5734, and the supplier must be prepared to comply with all technical, documentation, and logistical specifications tied to military-grade procurement. This subcontract opportunity is open for response until July 29, 2026, and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing. The contracting office is the ASC Commodities Division under the Department of Defense, and while no set-aside designation is specified, the solicitation is publicly accessible via the DIBBS platform. Suppliers must ensure their capabilities include not only manufacturing or sourcing compliant hardware but also rigorous adherence to labeling, packaging, and disclosure protocols as mandated by military standards, with no flexibility for non-compliant deliveries.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Filter Assembly and ManufacturingThe contract requires the manufacture and assembly of a RETURN FILTER ASSY with National Stock Number 1680-01-583-4352, following authorized source specifications tied to CAGE code 18350 and part number CE01233F1. This includes end-to-end production responsibilities such as sourcing raw materials, precision machining, integration of filtration media, and strict configuration control to ensure compliance with technical standards. All work must be performed in accordance with the defined quality and procedural requirements to meet defense-grade performance criteria. This is a small business set-aside contract under the SBA program, classified under NAICS code 332996 for other fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026, and is structured as a subcontract opportunity. The place of performance and point of contact details are not specified, but the procurement is accessible through the DIBBS platform using the provided reference link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Aerospace Connector Supply (NAS554-8)Six units of the MULTIPLE CONNECTOR, part number NAS554-8, are required to be supplied and delivered in full compliance with SAE AS4841 and NAS554 Rev 4 technical specifications. Each unit must be packaged according to MIL-STD-2073-1E standards and marked in accordance with MIL-STD-129 requirements to ensure proper identification, handling, and logistics integration within the Department of Defense supply chain. The contract is structured as a subcontract under the NAICS code 332996, issued by the Maritime Supply Chain ESOC Buys division of the Department of Defense, with a response deadline of July 29, 2026, and a posted date of July 24, 2026. All deliverables must meet rigorous aerospace connector performance and documentation criteria to support mission-critical applications.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Vacuum Bleed Filter Supply (NSN: 2990-01-513-6153)The contract specifies the supply of thirteen Vacuum Bleed Filters with part number 23055917-28 and national stock number 2990015136153, manufactured to meet stringent Department of Defense technical, quality, and traceability standards for use in critical aerospace systems. All units must comply with exacting performance and documentation requirements to ensure reliability and safety in high-stakes operational environments. The procurement is classified as a subcontract under NAICS code 332996, indicating it falls under other miscellaneous manufacturing. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contract awarded by the Land Supplier Operations Engines division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Crimped Expander Piston Ring SupplyThe contract requires the manufacture and supply of four crimped expander piston rings that must meet rigorous military specifications, ensuring full compliance with Defense Logistics Agency technical standards and packaging guidelines. These components are critical for high-performance applications and must be produced to exacting tolerances in accordance with DLA requirements to guarantee reliability and operational readiness under demanding conditions. Precision manufacturing, material certification, and adherence to approved quality control protocols are essential to satisfy the technical demands of the procurement. The solicitation, issued under the NAICS code 332996 for other fabricated metal product manufacturing, is structured as a subcontract opportunity with a response deadline of July 29, 2026. It is associated with the Land Supply Chain organization within the Department of Defense, and performance is to be delivered to a military postal address in FPO with ZIP code 09564. While no specific point of contact or set-aside classification is provided, all bidders must ensure their proposals align with the stated DLA technical and logistical criteria, and the submission must be made through the designated DIBBS platform to be considered valid.

POSTED

DEADLINE

Precision Fastener ManufacturingThe contract mandates the precision manufacturing of collar and pin-rivet components to stringent military specifications for use in a critical application, requiring adherence to exact engineering and quality standards. These components are essential for mission-critical systems and must be produced with zero tolerance for deviation, ensuring reliability under extreme operational conditions. The work is classified as a subcontract under the NAICS code 332996, indicating specialized fabrication of other metal products, and performance is required at Hill Air Force Base with the zip code 84056-5734. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, allowing a tight five-day window for qualified vendors to submit proposals. The contracting entity is the ASC Commodities Division within the Department of Defense, which oversees procurement for defense-related fastener systems. Although no set-aside designation or point of contact is listed, the contract’s high-stakes nature implies rigorous evaluation of technical capability, quality control processes, and production scalability. Subcontractors must demonstrate proven experience in military-grade fastener fabrication and compliance with all applicable defense manufacturing protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONNECTOR, MULTIPLE,The contract pertains to the procurement of a MULTIPLE CONNECTOR, identified by part number NAS554-8 and NSN 4730-01-625-7039, with a requirement for six units to be delivered within five days of award. The item must comply with non-government standards NAS554 Revision 4 dated 08/26/2011 and SAE AS4841 Revision D dated 04/01/2021, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E, with specific packaging codes, materials, and methods outlined, and marking must conform to MIL-STD-129 without special marking codes. Palletization follows DLA packaging requirements, and the delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at origin, and a Certificate of Conformance is authorized unless superseded by a Quality Assurance Letter of Instruction. The contract specifies the freight forwarder as Northrop Grumman Corp at a staging area in Melbourne, FL, with a final delivery destination in France. The purchase request number is 7016347413, unit price is $6.00 per each, totaling $36.00, and the original required delivery date is July 25, 2024. The solicitation number is SPE7M0-26-T-6925, issued under full and open competition with no set-aside, and the NAICS code is 332996. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

BOLT, FLUID PASSAGEThe contract solicitation SPE7M4-26-T-256H calls for 14 units of BOLT, FLUID PASSAGE with NSN 4730-01-460-5325, a restricted-source item manufactured exclusively to OEM drawings, with only prequalified sources eligible to respond. Delivery is required within five days of order placement to Tinker AFB, Oklahoma, with FOB Origin terms and inspection and acceptance also performed at origin. The item must comply with stringent marking requirements per MIL-STD-130, including NSN, part number, manufacturer’s CAGE code, date of manufacture, and the “FOR MILITARY USE ONLY” designation, while packaging and labeling adhere to ASTM D3951, RP001, and MIL-STD-129 with standardized barcoding for logistics automation. Safety and environmental compliance is mandated through DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and toxic substance disposal, alongside mandatory submission of Safety Data Sheets aligned with OSHA HazCom standards. Cybersecurity requirements are extensive, including implementation of NIST SP 800-171 controls via clause 252.240-7997, safeguarding covered defense information per 252.204-7012, and reporting cyber incidents immediately; the contractor must be CMMC Level 2 certified. Prohibitions extend to acquisition of telecommunications equipment from designated Chinese military companies and use of mandatory arbitration agreements. The contract mandates electronic invoicing via WAWF and requires offerors to provide their UEI and CAGE code, with full socioeconomic and small business status representations submitted. All submissions are strictly electronic through DIBBS by the July 29, 2026 deadline, and while pricing data is unspecified, historical unit costs suggest a variable range. The contract type remains undetermined pending award, but it includes standard FAR and DFARS clauses on payment acceleration, subcontracting, changes, defaults, and contractor liability, with administrative details like DoDAAC and point of contact to be finalized upon award.

FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 3 days

AI Contract Overview

The contract pertains to the supply of general-purpose antifriction bearings, excluding those designed for precision instruments, and requires adherence to military packaging standards. It is issued by the Department of National Defence under the Government of Canada and is classified under the NAICS code 332996, which relates to the manufacture of other fabricated metal product manufacturing. The contract is categorized as a subcontract opportunity, with the procurement focused on delivering these bearings to locations in British Columbia and Nova Scotia. The solicitation was posted on June 10, 2026, with a response deadline set for June 25, 2026. Although specific details like solicitation number, office address, or point of contact are not provided, the contract emphasizes compliance with military packaging requirements to ensure product integrity and suitability for defense-related use. The opportunity is publicly accessible via the Canada Buys portal, indicating transparency and open competition within a specified timeframe.