Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Aviation-Grade Webbing and Hardware

Active

Federal

Response Deadline11/09/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw aviation-grade webbing and fastening hardware to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The scope of work requires the provision of high-strength synthetic webbing and metal hardware that strictly adhere to Lockheed Martin P/N 365717-12 specifications. To ensure full traceability and compliance with the Buy American Act, the supplier must provide all necessary material certifications and Certificates of Conformance. The contract is categorized under NAICS code 314910 and is managed through the Department of Defense. Performance of the contract will take place in Tracy, California. The procurement process began on November 1, 2026, with a response deadline set for November 9, 2026.

General Info

Supply aviation-grade webbing and hardware for DLA Weapons Support in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

NAICS

314910 - Textile Bag and Canvas Mills

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A1-27-T-0244.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WEB, STRAP ASSY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 1

subcontract

Response DeadlineNov 9

Submission deadline

Response Deadline

11/09/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw aviation-grade webbing and fastening hardware for prime contractors on DLA Weapons Support Aviation Supply Chain projects. Provides high-strength synthetic webbing and metal hardware meeting Lockheed Martin P/N 365717-12 specifications. Provides material certifications and CoCs to ensure traceability and Buy American Act compliance. Delivers raw materials to the manufacturer.

Similar Contracts

Same NAICS industry code

Retaining Harness Kit Fabrication and Assembly

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Vehicular Seat Component Supply

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Involuntary Strap ManufacturerThis subcontract through C and T Supply Chain for the Department of Defense involves the manufacture of specialized involuntary straps to support DLA supply contracts. The selected manufacturer will fabricate restraints in red and yellow, specifically adhering to NSN 8465-01-470-6251 and NSN 8465-01-470-6253, using industrial textile and webbing machinery. The total delivery requirement consists of 16 bags, with each bag containing 10 restraints. To be eligible, the contractor must maintain ANSI/ISO/ASQ Q9001-2015 certification and ensure full compliance with the Buy American and Balance of Payments Program policies. The project falls under NAICS code 314910, with the place of performance located at FPO 96677. Responses to this solicitation are due by November 16, 2026.

C AND T SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

Supply of Vehicular Seat Covers (NSN 2540014608048)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

OCP Shoulder Sleeve Insignia ProductionThis subcontract for the Department of Defense C and T Supply Chain involves the production of 4,000 custom embroidered shoulder sleeve insignia. The manufacturer is responsible for delivering high-density embroidery with a minimum stitch count of 4,600, utilizing OCP green and black thread and applying hook fastener tape backing. To qualify for this project, the contractor must possess industrial embroidery machinery and hold certification by The Institute of Heraldry. The work supports prime contractors on DLA Troop Support projects and is categorized under NAICS code 314910, with performance taking place in zip code 85043.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Signal Flag ManufacturerThis subcontract opportunity with C AND T SUPPLY CHAIN for the Department of Defense involves the manufacture of international code alphabetic signal flags. The selected vendor must fabricate 50 finished flags using acrylic bunting in strict accordance with MIL-DTL-2692 and drawing 16696-6B, specifically including Type I, Class 1A heading. A critical requirement for this contract is that the vendor must be certified by The Institute of Heraldry. The scope of work includes the delivery of the final product along with two first article samples for comprehensive visual and dimensional examination. Interested parties must submit their responses by November 10, 2026, for performance in the 85043 zip code area under NAICS code 314910.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Acrylic Bunting Signal Flag ManufacturerThis subcontract through C AND T SUPPLY CHAIN for the Department of Defense requires the manufacture of 150 acrylic bunting signal flags. The flags must be Size 3-1/2, Designator 1, and produced in strict accordance with specification MIL-DTL-2692 and drawing 16696-11C. The manufacturer is required to utilize industrial sewing equipment and acrylic bunting fabric while ensuring full compliance with the Buy American Act. The contractor must provide two first article samples for visual and dimensional examination prior to the final delivery of the 150 completed flags. This project falls under NAICS code 314910 and is performed in zip code 85043. Interested parties must respond by November 11, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Custom Embroidered Army SES Flag ManufacturerThis subcontract involves the manufacture of 60 custom embroidered flags for the Department of the Army under the DLA Troop Support C and T Supply Chain. The project requires the use of industrial embroidery machinery to produce flags from lightweight nylon with Type II headings and fringe, strictly adhering to Drawing 5-1-816 and MIL-DTL-2692 specifications. All finished products are to be delivered to Phoenix, Arizona. Qualified contractors must be capable of providing CMMC Level 2 self-assessment support to meet security requirements. The opportunity is categorized under NAICS code 314910, with a response deadline set for November 6, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing of International Code Signal FlagsThis subcontract involves the manufacturing of 702 alphabetic international code signal flags for prime contractors supporting DLA Troop Support C and T Supply Chain projects. The flags must be fabricated from acrylic bunting material according to Size 4 dimensions, specifically a 4 foot 4.5 inch hoist and fly. Production must adhere to Type I, Class 1A heading specifications as outlined in drawing 16696-6B and MIL-DTL-2692. The contractor is required to utilize industrial sewing equipment and maintain strict compliance with the Buy American and Balance of Payments Program. This Department of Defense project falls under NAICS code 314910, with performance taking place in zip code 85043. The final deliverable consists of 702 completed signal flags.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

International Code Signal Flag SupplierThis subcontract opportunity, managed by C AND T SUPPLY CHAIN for the Department of Defense, seeks a supplier to provide specialized alphabetic international code signal flags. The contractor is responsible for fabricating Size 8 flags using acrylic bunting, specifically measuring 1 foot 9 inches in both hoist and fly. The flags must feature a Type I, Class 1A heading and a Letter R design, adhering strictly to the specifications for international code alphabetic signal flags. The procurement falls under NAICS code 314910 and is intended to support prime contractors delivering on DLA Troop Support supply contracts. Interested parties must submit their responses by November 10, 2026, with the place of performance located in zip code 85043.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Sandbag Manufacturing and SupplyThis subcontract for Sandbag Manufacturing and Supply supports prime contractors working on projects for the County of San Diego Department of Public Works. The selected provider will manufacture and supply sandbags as needed, ensuring bags feature either hemmed or heat-cut raw edges and include polypropylene or jute tie strings. All products must be packed into clean, untorn bales of 1,000 units and delivered FOB Destination to San Diego. The contract requires strict adherence to domestic preference standards and EPA Comprehensive Procurement Guidelines. Interested parties should note that the response deadline is November 9, 2026, and the work falls under NAICS code 314910.

County of San Diego, Department of Public Works

POSTED

DEADLINE

Specialized Roof Tarpaulin Manufacturer/SupplierThis small business set-aside subcontract through DLA Maritime - Puget Sound requires the manufacture or procurement of industrial-grade roof tarpaulins for prime contractors. The supplier must provide specific part numbers and dimensions, including P/N 5972374, TI-L-2.57MX22.5M, and TI-L-.74MX30.5M, ensuring full compatibility with Layher brand scaffolding roof truss systems. All deliverables must adhere to strict military standards, specifically MIL-STD-130 for marking and MIL-STD-129 and ASTM-D-3951 for packaging. The completed tarpaulins are to be delivered FOB Destination to Bremerton, Washington. This opportunity falls under NAICS code 314910 and is managed by the Department of Defense.

DLA Maritime - Puget Sound

POSTED

DEADLINE

in about 24 hours

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

Same awarding agency

Supply of End Chain Links (NSN 4010012959406)This subcontract involves the procurement of 10 specialized chain end links, specifically part number G-340 7/8 inch from The Crosby Group LLC, to support prime contractors for the DLA Weapons Support Aviation Supply Chain. The selected provider is responsible for manufacturing or sourcing the units and ensuring all items are delivered FOB Origin. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129. Additionally, the supplier must maintain full compliance with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance for this requirement is centered in Greensboro, North Carolina.

Hardware Manufacturing

POSTED

about 1 hour ago

DEADLINE

MIL-STD-129 Packaging and Marking ServicesThis subcontract for MIL-STD-129 Packaging and Marking Services supports the DLA Weapons Support Aviation Supply Chain by providing specialized packaging and marking for prime contractors. The scope of work includes packaging items according to ASTM D3951, marking and labeling per MIL-STD-129, and executing palletization in accordance with RP001. All activities must comply with the DLA Master List of Technical and Quality Requirements to ensure shipment-ready assemblies are delivered to DLA Distribution San Joaquin. The project is categorized under NAICS code 561910 and is managed by the Department of Defense. Performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Fabrication and Assembly of Web Strap AssembliesThis subcontract involves the fabrication and assembly of 17 Web Strap Assemblies for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for manufacturing the assemblies according to Lockheed Martin part number 365717-12, ensuring quality assurance sampling adheres to MIL-STD-1916 or ASQ H1331 standards, and executing bare item marking in accordance with RQ017. The project requires strict adherence to security and regulatory standards, specifically CMMC Level 2 certification and DFARS 252.204-7012 compliance. Performance of the contract will take place in Tracy, California, with a response deadline set for November 9, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Wire Rope Assembly, Single Leg (NSN 4010-01-301-0203)This subcontract involves the manufacture or sourcing of three single leg wire rope assemblies, identified by NSN 4010-01-301-0203, to support prime contractors delivering for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for coiling the items to specific dimensions of 23.3 by 23.3 by 5.8 inches and utilizing block-and-brace packaging. All deliverables must adhere to strict marking and packaging standards, specifically MIL-STD-129, MIL-STD-2073-1E, and RP001. To be eligible for this contract, the provider must maintain ISO 9001:2015 certification. The place of performance is designated as Hill AFB, zip code 84056-5734. This opportunity falls under NAICS code 314991 and is managed by the Department of Defense.

Rope, Cordage, and Twine Mills

POSTED

about 1 hour ago

DEADLINE

MIL-SPEC Packaging and Fulfillment ServicesThis subcontract for MIL-SPEC Packaging and Fulfillment Services involves providing specialized military-grade packaging and marking for prime contractors supporting the DLA Weapons Support Aviation Supply Chain. The scope of work requires sealing five seal subassemblies in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117. Additionally, the contractor must ensure all markings comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contractor is responsible for managing FOB Origin shipping to the Special Operations Forces Support Activity located in Lexington, Kentucky. This project falls under NAICS code 561910 and is managed through the Department of Defense. The response deadline for this opportunity is November 9, 2026.

Packaging and Labeling Services

POSTED

about 1 hour ago

DEADLINE

Manufacture of Seal Subassemblies (PN 9533857)This subcontract involves the manufacture of five high-precision seal subassemblies under part number 9533857 and NSN 5330-00-872-3342 for the DLA Weapons Support Aviation Supply Chain. The project requires the use of precision molding or machining equipment to achieve aviation-grade tolerances, utilizing asbestos-free processes in accordance with FED-STD-313. Quality assurance must be conducted following MIL-STD-1916 or ASQ H1331 standards. The contract is categorized under NAICS code 339999 and is managed by the Department of Defense. Performance of the work will take place in Lexington, Kentucky. Interested parties must note the response deadline of November 9, 2026, for this specific procurement effort.

All Other Miscellaneous Manufacturing

POSTED

about 1 hour ago

DEADLINE

Supply of Turnlock Fastener Studs (NSN 5325005998785)This subcontract involves the manufacture or procurement of turnlock fastener studs conforming to NSN 5325005998785 for the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for ensuring all products meet strict quality sampling standards per MIL-STD-1916 or ASQ H1331 and must adhere to the Buy American Act. Packaging, marking, and labeling must be executed in accordance with ASTM D3951 and MIL-STD-129. The scope of work requires the delivery of one package of fastener studs on an FOB Origin basis. The project falls under NAICS code 332722 and is associated with the Department of Defense. Interested parties must respond by November 9, 2026, for performance based in Bangor, Maine.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense under the DLA Weapons Support Aviation Supply Chain. The contractor is responsible for validating manufactured brackets for prime contractors by verifying dimensions, material properties, and tolerances against the technical data package. These evaluations must be conducted using precision measurement tools and material analysis equipment, with the final deliverables being a FAT Certification and a detailed Test Report. Performance will take place at Tinker AFB, and the service provider must maintain ISO/IEC 17025 certification or an equivalent DLA-approved standard. The opportunity was posted on November 1, 2026, with a response deadline of November 9, 2026. The work falls under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 1 hour ago

DEADLINE

Angle Bracket Supply (NSN 5340-01-227-6475)This subcontract involves the manufacture or sourcing of 69 angle brackets, identified by NSN 5340-01-227-6475, to support prime contractors delivering on DLA supply contracts. The contractor is responsible for ensuring all units meet exact military specifications and comply with the DLA Master List of Technical and Quality Requirements through rigorous quality control and inspection. The project is managed by the Department of Defense under the DLA Weapons Support Aviation Supply Chain, with performance taking place at Tinker AFB. The scope of work includes the final packaging of the 69 units for Government-Arranged Transportation. The solicitation was posted on November 1, 2026, with a response deadline of November 9, 2026.

Fabricated Structural Metal Manufacturing

POSTED

about 1 hour ago

DEADLINE

Manufacturer of Airframe Ball Bearings (NSN 3110-01-695-6484)This subcontract involves the manufacture and supply of three high-precision airframe ball bearings under NSN 3110-01-695-6484 for the DLA Weapons Support Aviation Supply Chain. Because these components are designated as Navy Identified Critical Safety Items, the provider must adhere to strict quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. To be eligible, the manufacturer must maintain SAE AS9100 quality management certification and provide a CMMC Level 2 self-assessment. The project is categorized under NAICS code 332991, with the place of performance located in Cherry Point. Responses to this requirement are due by November 9, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 1 hour ago

DEADLINE

WEB, STRAP ASSY

Solicitation # SPE4A1-27-T-0244

Solicitation SPE4A1-27-T-0244 is a federal procurement issued by the DLA Weapons Support Aviation Supply Chain for 17 units of Web Strap Assemblies, identified by NSN 1680-01-394-5446 and Lockheed Martin part number 365717-12. The contract is a fixed-price supply requirement with a need ship date of April 20, 2027, and an original required delivery date of June 27, 2028. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking, while ensuring compliance with the DLA Master List of Technical and Quality Requirements. Key regulatory requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information under DFARS 252.204-7012, and adherence to the Buy American Act. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via the DIBBS portal and maintain current representations and certifications within the System for Award Management.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

LINK, CHAIN, END

Solicitation # SPE4A1-27-T-0243

Solicitation SPE4A1-27-T-0243 is a small business set-aside issued by the DLA Weapons Support Aviation Supply Chain for the procurement of 10 units of Link, Chain, End, identified by NSN 4010012959406 and part number G-340 7/8 inch from The Crosby Group LLC. The contract is a fixed-price agreement with delivery terms set as FOB Origin and a required delivery date of October 14, 2026, with a need ship date of April 8, 2027. Inspection and acceptance will take place at the destination, with a zero non-conformance requirement for sample lots. The procurement includes strict adherence to quality and packaging standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Mercury or mercury-containing compounds are strictly prohibited in preservation and packaging. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material identification. Invoicing must be processed through the Wide Area WorkFlow system. Offers involving additive manufacturing are ineligible for award, and the government may apply a HUBZone price evaluation preference.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 1 hour ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS