This Subcontract opportunity from Department Of Defense was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Blind Rivets (NSN 5320-01-136-7163)

Closed

Federal

Submission Closed09/25/2026, 12:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334418

New

International

Automatic Particle Counter (APC) Equipment SupplyThis subcontract involves the supply of 150 Automatic Particle Counters (APC) intended for prime contractors working on projects for the Government of Canada, specifically the Department of National Defence and the Royal Canadian Air Force. The equipment must be manufactured to meet ISO 11171 standards and provide contamination code reporting in accordance with ISO 4406:2021. Each unit is required to be equipped with high-pressure hose sets and either M16x2 or SAE J1502 quick-connect couplings, and must be delivered with technical documentation and identification plates. The procurement is categorized under NAICS code 334418 and is to be performed within Canada. Interested parties should note the response deadline of November 16, 2026, for this equipment supply opportunity.

Department of National Defence

POSTED

DEADLINE

Quick Release Pin SupplierThis subcontract involves the supply of 43 specialized quick-release pins, identified by NSN 5315-015-33818-8, to support prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these pins in strict accordance with the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements. All items must be packaged according to RP001 DLA Packaging Requirements and delivered to the designated DLA destination in San Diego, California. The procurement falls under NAICS code 334418, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Power Cable Assembly SupplyThis subcontract involves the supply of two specialized electrical power cable assemblies, specifically NSN 6150015902141 and L3 Technologies part number 60085525+000. The contract supports prime contractors delivering for the Department of Defense under the DLA Weapons Support ASC Commodities Division. All deliverables must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking requirements. The project falls under NAICS code 334418 and specifies New Cumberland as the place of performance. Interested parties must note the response deadline of November 13, 2026, following the posting date of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Cable Assembly Production (NSN 5995017172227)This subcontract involves the manufacture and supply of one specialized Cable Assembly, identified by NSN 5995017172227, for prime contractors supporting Department of Defense supply contracts. The production must strictly adhere to Basic Drawing NR 19207 12613498 Rev A, as well as Reference Drawings NR 19207 12420957 Rev D and NR 19207 12608579 Rev A, in accordance with TDP Rev A Gen 2 requirements. Managed by the DLA Weapons Support Aviation Supply Chain ESOC Buys, the contract falls under NAICS code 334418 and requires full compliance with DFARS covered defense telecommunications prohibitions. The place of performance is located in Little Falls, Minnesota. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Manufacture and Supply of Blind Rivets (PN 11438039-15)This subcontract involves the manufacture and supply of 50 blind rivets, part number 11438039-15, for prime contractors supporting DLA Weapons Support ASC projects. The rivets must be fabricated according to reference drawing 18876 11438039 Revision AE using precision machining and forming equipment. Quality assurance requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged per MIL-STD-2073-1E and marked per MIL-STD-129. The contractor must maintain several critical certifications and security standards, including the US/Canada Joint Certification Program, CMMC Level 2, and DFARS 252.204-7012 compliance. This Department of Defense requirement is categorized under NAICS code 334418, with the place of performance located in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacture and Supply of Straight Tube-to-Boss AdaptersThis subcontract involves the manufacture and supply of 1,812 straight tube-to-boss adapter assemblies for the DLA Weapons Support Nuclear Reactor Program. The scope of work includes the fabrication of fitting bodies, nuts, and sleeves designated as Critical Application Items, utilizing precision machining to ensure compliance with NSN 4730004115597. All deliverables must be marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards. The project is categorized under NAICS code 334418 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to support prime contractors delivering these essential components to the Department of Defense.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Straight, Headless Pins (Critical Application)This subcontract involves the supply of 47 units of straight, headless pins for prime contractors supporting DLA supply contracts. The items must meet the technical requirements for part number 82402098 and comply with specifications from approved manufacturers, specifically Transaero, Inc. or Ontic Engineering. Due to the critical application of these components, they must be produced with high-precision tolerances and include full material certifications. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with the place of performance located in Cherry Point. The solicitation was posted on November 6, 2026, with a response deadline of November 13, 2026. The procurement falls under NAICS code 334418.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Drain Cocks (NSN 4820012485052)This subcontract involves the manufacture or sourcing of 26 units of drain cock hardware meeting NSN 4820012485052 specifications for prime contractors supporting the DLA Weapons Support Fluid Handling Division of the Department of Defense. The contractor is responsible for ensuring all items are packaged and palletized according to MIL-STD-2073-1E and RP001 standards, with all shipments marked in compliance with MIL-STD-129. The performance of this contract will take place in Bremerton, Washington. Interested parties must respond by November 16, 2026, regarding this requirement categorized under NAICS code 334418.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Annular Ball Bearing SupplyThis subcontract involves the supply of 20 annular ball bearings, identified by NSN 3110015316865, for prime contractors working on DLA Weapons Support procurement projects. The bearings must strictly adhere to Configuration Control Item standards to ensure technical compliance. All units are to be delivered to the Defense Logistics Agency in Jacksonville, Florida. The contract mandates rigorous logistics and handling protocols, requiring packaging according to MIL-STD-2073-1E and marking in accordance with MIL-STD-129. Additionally, all shipments must be palletized following RP001 DLA Packaging Requirements. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of MIL-DTL-38999 Electrical Plug ConnectorsThis subcontract involves the manufacture or distribution of six electrical plug connectors, specifically part number D38999/26FE6PN, for prime contractors working with the Department of Defense DLA Weapons Support Active Devices Division. The components must strictly adhere to MIL-DTL-38999N Revision N and MIL-DTL-38999/26G Revision G specifications. To qualify, the provider must hold QPL/QML certification for Federal Stock Class 5935. Additionally, all deliverables must comply with MIL-STD-129 and RP001 packaging standards. The opportunity is categorized under NAICS code 334418, with a response deadline set for November 20, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Nonmetallic Hose AssembliesThis subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the fabrication and supply of 172 nonmetallic hose assemblies. The contractor must manufacture these assemblies according to NSN 4720-01-495-7466 and the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of additive manufacturing. All finished products must be marked per MIL-STD-129 and packaged according to ASTM D3951 for delivery to DLA Distribution centers. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in New Cumberland. Interested parties must respond by November 16, 2026, to provide these essential components to prime contractors supporting the agency.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Printed Circuit Board (PCB) Fabrication and AssemblyThis subcontract opportunity is for the fabrication and assembly of populated printed circuit boards to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes multi-layer PCB fabrication, SMT assembly, and through-hole soldering of signal processing components, all performed according to strict aerospace standards. The final deliverables consist of fully populated and tested PCB assemblies. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division and is designated as a Total Small Business Set-Aside. Qualified bidders must maintain ISO 9001 certification and ITAR registration. The place of performance is located in New Cumberland, Pennsylvania, with a response deadline set for November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 days ago

DEADLINE

in 5 days

AI Contract Overview

This subcontract through the Department of Defense ASC Commodities Division involves the supply of 11,900 blind rivets, specifically part number NAS9305BNS-6-03, for prime contractors supporting DLA supply contracts. The items must be manufactured or sourced in strict accordance with NAS9305 Revision 07 and NAS1686 Revision 5, utilizing precision aerospace fastening equipment and materials that comply with National Aerospace Standard specifications. Logistical requirements mandate that packaging follows ASTM D3951 and RP001 standards, with labeling performed per MIL-STD-129. The place of performance is designated as Tinker AFB, Oklahoma. This opportunity is categorized under NAICS code 334418, with a response deadline of September 25, 2026.

General Info

DoD subcontract for 11,900 blind rivets delivered to Tinker AFB by September 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-32FB.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RIVET, BLIND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedSep 17

subcontract

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 12:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies blind rivets for prime contractors delivering DLA supply contracts. Manufactures or sources part number NAS9305BNS-6-03 in accordance with NAS9305 Revision 07 and NAS1686 Revision 5. Packs items per ASTM D3951 and RP001, and labels packaging per MIL-STD-129. Requires precision aerospace fastening equipment and materials compliant with National Aerospace Standard specifications. Delivers 11,900 blind rivets.