Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of BREATHER Unit (P/N 1640210)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement and delivery of a single BREATHER unit identified by part number 1640210 and national stock number 2815015219933, fully compliant with all technical specifications and marking requirements outlined in the agreement. Delivery must be completed on a FOB basis to Fort Leonard Wood, Missouri, no later than July 31, 2026, ensuring timely receipt and integration into operational use. The contract is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 339991 for other miscellaneous manufacturing. The unit must meet all contractual performance, quality, and documentation standards to satisfy the procurement objectives of the issuing agency.

General Info

Procure and deliver one BREATHER unit, part 1640210, to Fort Leonard Wood by July 31, 2026, FOB, per DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one BREATHER unit (P/N 1640210, NSN 2815015219933) compliant with contract specifications, marking requirements, and FOB point delivery to Fort Leonard Wood, MO by July 31, 2026.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7L1-26-T-888U

This contract is for the supply of a single gasket identified by NSN 5330-01-674-1415, with delivery required within 20 days of award. The solicitation, issued under SPE7L1-26-T-888U, has a response deadline of August 10, 2026, and falls under NAICS code 339991 for other miscellaneous fabrication. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or approved chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The gasket is classified as a Type 2 (Code X) item with a shelf life of one month, extendable under RS001. Government identification must be removed from non-accepted supplies, and all packaging must adhere to DLA packaging standards.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

SEAL, NONMETALLIC ROUND

Solicitation # SPE7L4-26-T-5859

The contract specifies the procurement of a nonmetallic round seal with NSN 5330-01-717-7130 and part number 4380969-2, requiring a quantity of 31 units delivered FOB origin within 147 days, with no variance allowed in quantity. The product must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. Technical and quality requirements are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The item falls under Federal Supply Classification 5330/5331 and is subject to hazardous material shipping regulations as defined by IP025. Delivery must be made to the DLA Distribution facility in New Cumberland, PA, with a need ship date of January 5, 2027, and the original required delivery date set for March 5, 2027. The contract is issued under solicitation SPE7L4-26-T-5859, with a unit price of $31.00 per unit and a total value of $961.00, and the point of contact for inquiries is Anna-Rachelle Betts at DLA.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-888K

The contract pertains to the procurement of a gasket identified by NSN 5330-01-266-4931, with a quantity of one unit, under solicitation number SPE7L1-26-T-888K. Delivery is required within 20 days after date of award, and responses must be submitted by August 10, 2026. The acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the scale of the acquisition. The gasket must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds in direct contact with the item, except for specific exempted applications such as functional mercury in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must include shock-proof design and a secondary containment barrier as mandated by NAVSEA 5100-003D. Additionally, the item must be entirely free of asbestos, with any previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with primary point of contact Kristina Derry, and performance location is designated as FPO with ZIP 09566.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

BACK-UP RING, PREFOR

Solicitation # SPE7L3-26-T-137N

This contract specifies the procurement of three back-up rings, preformed, with the national stock number 5330-01-706-2343 and part numbers 18-20418-12R1, 20140-ITEM-1.2, and 20421-ITEM-2 from RIX INDUSTRIES. The items must be delivered within 20 days to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591 under FOB destination terms, with no variance allowed in quantity. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, and all marking must adhere to MIL-STD-129. The end item is subject to stringent material restrictions, including a complete prohibition on intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Asbestos is strictly prohibited per FED-STD-313. Packaging, marking, and shipping of hazardous materials must follow IP025 requirements, and all shipments must use traceable transport methods—parcel post is forbidden. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must be submitted per RC001. All items are subject to inspection and acceptance at the delivery point, and the supplier is required to follow DLA packaging standards and military identification protocols per MIL-STD-130N.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

PACKING WITH RETAIN

Solicitation # SPE7L1-26-T-890D

The contract specifies the procurement of four units of a commercial item identified by NSN 5330-15-056-5578 under solicitation SPE7L1-26-T-890D, with a required delivery within five days of award. Packaging must adhere strictly to MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bags to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331 susceptible to UV damage. This packaging requirement applies uniformly across direct vendor deliveries, foreign military sales, and stock shipments. All items must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. The item must be identified per MIL-STD-130N, and any government markings on non-accepted supplies must be removed. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supply Chain, with Mariel Pugh as the primary point of contact, and responses are due by August 10, 2026.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

RUBBER SHEET, SOLID

Solicitation # SPE8E9-26-T-3270

The contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore durometer range of 45.0 minimum to 55.0 maximum, and smooth surfaces on both sides. The material must be synthetic rubber, free of asbestos as defined in FED-STD-313, and cannot contain mercury or mercury-containing compounds except in limited functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof with a secondary containment boundary. The item is classified as a Type I shelf-life product with a 12-month lifespan, requiring at least 85% of that life to remain at delivery, with cure and expiration dates marked per MIL-STD-129 in calendar quarter and year format. All shipments must comply with DLA packaging requirements and the technical and quality standards listed in the DLA Master List, with sampling performed in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, where acceptance requires zero non-conformances unless otherwise stated. The rubber sheet must be marked every three feet with the specification number, revision letter, type, class, and cure or manufacture date in quarter and year, with markings meeting MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item marking requirements prior to award. The NSN 9320-00-641-3051 is procured competitively under a federal specification, with one unit required for delivery within 20 days of award under solicitation SPE8E9-26-T-3270, issued by the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 22 hours ago

DEADLINE

RETAINER, PACKING

Solicitation # SPE7L3-26-Q-1229

The contract pertains to the procurement of 43 retainer, packing units under solicitation SPE7L3-26-Q-1229, with a NSN of 5330-01-092-4889 and a purchase request number of 7016688602. Delivery is required within 90 days of award, and responses must be submitted by August 5, 2026. The item falls under the Federal Supply Classification 5330/5331, which includes stock numbers susceptible to degradation under ultraviolet exposure, necessitating packaging in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. All items must be free of asbestos, with any alternatives requiring approval under Clause L30 and Provision 4 conditions. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, and MIL-STD-130N governs the identification marking of military property. Covered defense information protocols are also in effect. The place of performance is New Cumberland, PA, 17070-5002, with Susan Diamond at DLA serving as the primary point of contact.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-889W

The contract is for the procurement of rubber strip under the National Stock Number 5330-01-651-7290, with a unit of issue of one roll equaling fifty feet. The total quantity required is one roll, against purchase request 7017664656, with delivery mandated within twenty days after award. All items must be free of asbestos, and any prior materials containing asbestos are strictly prohibited; alternate materials require formal approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, specifying a medium-duty, waterproof, greaseproof, opaque bag to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. Identification marking must adhere to MIL-STD-130N, and covered defense information provisions may apply. The solicitation is issued under SPE7L1-26-T-889W, posted on July 29, 2026, with responses due by August 10, 2026, and falls under NAICS code 339991. Performance is to be directed to FPO, 09556, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7M4-26-T-291M

Offerors must comply with strict requirements regarding telecommunications equipment and domestic sourcing, including adherence to the Berry Amendment, Buy American Act, and DFARS clauses that restrict foreign-sourced materials, with a reduced threshold of $150,000 requiring full disclosure for non-domestic content. Submission of quantity ranges is strongly encouraged due to fluctuating demands, allowing buyers to consolidate or adjust orders without re-solicitation, though this does not apply to Auto IDC. All offerors must represent they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit certifications for eligibility under specific small business categories as outlined in FAR provisions. Access to the Vendor Shipment Module is transitioning to require registration via the Account Management & Provisioning System, with mandatory schema updates for WebServices users to maintain shipping capabilities. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any offer including AM-produced items will be deemed ineligible. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to avoid assumption of non-responsiveness. The solicitation is for 309 O-rings under NSN 5331-00-800-8390, with a delivery requirement of 256 days ADO, and responses are due by August 10, 2026. APEX Accelerators offer free support for businesses seeking to enter government contracting.

FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

SEAL RING, METAL

Solicitation # SPE7L3-26-T-137U

The item is a metal seal ring with NSN 5330-01-074-4995, requested in a quantity of 18 units under purchase request 7017601986, with a delivery deadline of 161 days after contract award. The procurement is governed by Defense Logistics Agency packaging requirements and is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with the item cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies to the handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed mandatory training on handling DOD export-controlled technical data, and approved by DLA authority may access such information. The solicitation number is SPE7L3-26-T-137U, posted on July 29, 2026, with responses due by August 10, 2026. The NAICS code is 339991, the contracting agency is the Department of Defense under Land Supplier Operations Vehicle Support, and the place of performance is Tracy, California, 95304-5000. Primary point of contact is Susan Diamond via email dla.flbb1prs@dla.mil and phone 6146925625.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

SEAL, PLAIN ENCASED

Solicitation # SPE7L3-26-T-137P

The contract pertains to the supply of two SEAL, PLAIN ENCASED items identified by NSN 5330-99-503-4788, with a delivery requirement of 20 days after award. The items must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet degradation. All supplied materials must be free of asbestos, and any previously approved asbestos-containing parts are no longer acceptable unless formally approved under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The contract enforces MIL-STD-130N for identification marking of U.S. military property and mandates removal of government identification from non-accepted supplies. Covered Defense Information provisions may apply, and packaging must adhere to DLA packaging requirements. The solicitation, issued under SPE7L3-26-T-137P, has a response deadline of August 10, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with Susan Diamond as the primary point of contact.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

SEAL, NONMETALLIC RO

Solicitation # SPE7L3-26-T-137S

The contract is for the procurement of 168 nonmetallic seals with NSN 5330-01-362-3392, solicited under SPE7L3-26-T-137S by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The seals must comply with DLA packaging requirements and incorporate technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The item is strictly prohibited from containing asbestos as defined in Fed-Std-313, and all non-accepted supplies must have government identification removed prior to return. Performance is required at New Cumberland, PA, 17070-5002, with delivery due 119 days after order award. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with Stephen Weaver listed as the primary point of contact. The NAICS code 339991 identifies this as an other miscellaneous manufacturing activity, and the procurement is open to federal contractors without set-aside designation.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

SPECTACLES, INDUSTRI

Solicitation # SPE8E6-26-T-3915

The contract pertains to the procurement of industrial spectacles under NSN 4240-01-729-1324, with a quantity of 10 units, each priced at $10.00, for a total of $100.00. Delivery is required within five days from the date of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and either TQ IP025 for hazardous material or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. The items must be shipped by traceable freight methods, not parcel post, to the designated military address at Camp Lejeune, NC. The contract references multiple DLA directives governing technical standards, source approval documentation, and removal of government identification from non-accepted supplies, with all provisions governed by the active revision of the DLA Master List as of the solicitation or award date. The solicitation number is SPE8E6-26-T-3915, with a response deadline of August 10, 2026, and the required delivery date is July 30, 2026. The point of contact is John Lieb, and the North American Industry Classification System code is 339113 for optical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0411

A non-NSN item with part number 7310GM5022323 is being solicited under purchase request 7017575083 for a quantity of one unit. The solicitation, identified by number SPE3SE-26-Q-0411, was posted on July 29, 2026, with a response deadline of August 5, 2026. This is a federal procurement managed by the Defense Logistics Agency under the Department of Defense. No specific set-aside type or NAICS code is provided. The place of performance and office address details are unspecified, but the procurement is for a U.S.-based operation. All questions regarding the solicitation must be directed via email to DibbsBSM@dla.mil, with further information accessible through the DIBBS website using the solicitation number. The official solicitation document can be retrieved via the provided UI link.

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3732

This contract, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3732, requires the delivery of one unit of NSN 3455-01-045-7948, identified as a rotary component, with a strict delivery timeline of 20 days from the award date. The item must be shipped FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow the DLA Packaging Requirements for Procurement, and the use of ozone-depleting substances is prohibited. The shipment must be sent via traceable freight methods, explicitly excluding parcel post, to the designated delivery point at Naval Air Station North Island in San Diego, California. Government-specific identifiers and control codes, including the freight address, military freight number, and project codes, are included for internal tracking and compliance. The contract incorporates all applicable technical and quality standards referenced through R and I numbers from the official DLA master list, with revisions controlled based on solicitation and award dates. The required delivery date is January 12, 2026, and the contract is set to expire after response deadlines in August 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 22 hours ago

DEADLINE

GAGE, SNAP, FIXED

Solicitation # SPE8E5-26-T-3729

The contract pertains to the procurement of two units of a GAGE, SNAP, FIXED item identified by NSN 5220-15-033-5333 and part number 506010051, with a total value of $2.00 per unit and a firm fixed price structure. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as a baseline, but all DLA Master List of Technical and Quality Requirements take precedence, mandating adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and traceable freight shipping is required—parcel post is explicitly prohibited. The item is to be delivered to the Marine Corps Systems Command in Quantico, Virginia, with specific shipping and identification codes provided for government use. The contract references technical and quality requirements from the DLA Master List, with revision control tied to the solicitation issuance date. The solicitation number is SPE8E5-26-T-3729, issued by the Defense Logistics Agency under the NAICS code 333515, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The contract includes a covered defense information clause and requires compliance with source approval documentation and removal of government identification from non-accepted supplies. The point of contact is Khue Nguyen, reachable via email and phone, and the unit of issue is each (EA). The required delivery date is set for January 9, 2026, with a project code and tracking identifiers provided for logistical and financial purposes. Government use fields include specific distribution, fiscal, and administrative codes to ensure proper processing and accountability within the Department of Defense acquisition system.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 22 hours ago

DEADLINE

INNER TUBE, PNEUMATIC T

Solicitation # SPE7L7-26-T-4493

This contract specifies the procurement of 50 pneumatic tire inner tubes with a straight large bore valve system, identified by NSN 2610-00-051-9610 and part number GP4/16.00-24/TRJ670-02/ON CENT. Each inner tube must include a TR-J670-02 valve stem, TR-AD4 adapter, and TR-SP1000 component, with the valve stem centered. The product must comply with strict environmental standards prohibiting all Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item has a non-extendable shelf life of 60 months, classified as Type I, and must be packaged per MIL-STD-2073-1E with each tube partially inflated, folded to avoid sharp creases, and treated with powdered soapstone or talc to prevent sticking. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. The delivery destination is the Vehicle Main Depot at Red Mountain, Cairo, Egypt, under FOB origin terms, with inspection and acceptance occurring at the point of origin. The contracted quantity of 50 units must be delivered within 20 days of order, with no variance allowed in quantity. The freight forwarder is DEG005, DF YOUNG, in Hanover, Maryland, and the contract is issued under solicitation SPE7L7-26-T-4493, with a required delivery date of August 3, 2026. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date.

Tire Manufacturing (except Retreading)

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-284H

The contract is for the procurement of CHIP, AMMONIA with the NSN/Part Number 6550-01-530-9390, under a single-unit purchase request numbered 7017447510. The solicitation was issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE2DS-26-T-284H and was posted on July 29, 2026. Respondents must submit their proposals by August 4, 2026, at 5:00 PM, with no set-aside provisions specified for small businesses or other categories. The item is designated for federal use, and the place of performance has not been defined with specific geographic details. All correspondence and submissions must be processed through the official DIBBS platform, accessible via the provided link.

Industrial Gas Manufacturing

POSTED

about 22 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 22 hours ago

DEADLINE

LINK, FUSIBLE, FIRE

Solicitation # SPE8E6-26-T-3916

The contract specifies the procurement of 30 units of LINK, FUSIBLE, FIRE with NSN 4210016853524 under solicitation SPE8E6-26-T-3916, requiring delivery within 20 days FOB origin with no variance in quantity. All items must be packaged and marked in strict compliance with DLA packaging requirements, MIL-STD-129, and applicable technical standards, including IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous items, with DLA Master List requirements taking precedence. The product must be shipped via traceable freight, not parcel post, to the designated delivery point at Shaw Air Force Base, South Carolina, with the required shipment reference RDD 777 and project code TP 2. All documentation must align with DLA’s source approval request and government identification removal protocols, and the materials are subject to inspection and acceptance at the destination. The contract includes specific unit of issue, pricing, and compliance directives tied to the DLA Master List of Technical and Quality Requirements, with delivery due no later than July 27, 2026, and response to solicitation required by August 10, 2026.

All Other Miscellaneous Textile Product Mills

POSTED

about 22 hours ago

DEADLINE

BANDAGE KIT, ELASTIC, AB

Solicitation # SPE2DS-26-T-284K

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a Bandage Kit, Elastic, AB with NSN 6510-01-532-6656 under solicitation number SPE2DS-26-T-284K. The request is for a single unit and was posted on July 29, 2026, with a response deadline of August 4, 2026. This is a federal procurement action with no specific set-aside designation or NAICS code listed, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contracting activity is managed through the DLA’s procurement system. Interested parties must submit responses prior to the stated deadline via the provided DIBBS portal link to be considered for award.

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4492

This contract, issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4492, pertains to the procurement of one power supply unit with NSN 6130-01-523-2469, to be delivered FOB origin within 20 days of contract award. The item is subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. All packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly adhering to government specifications. The supply must not contain intentionally added mercury or mercury-containing compounds except for specific authorized uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as defined by NAVSEA, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with acceptance criteria mandating zero non-conformances unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract enforces CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. Delivery is directed to USS PORTLAND LPD 27 in San Diego, with inspection and acceptance occurring at the destination. The supplier must use the specified unit of issue and meet all packaging, marking, and transportation requirements as outlined in DLA procedural notes. The purchase request number is 7017574045, and the original required delivery date is July 20, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3725

This solicitation is for 3 pounds of welding rod specified as MIL-R-5031 CL 5 0.062, with a diameter of 1/16 inch and a length of 36 inches, classified as steel corrosion-resisting filler. The item is identified by NSN 3439-00-246-0575 with a unit of issue of 1 pound and a quantity of 3 pounds under purchase request 7017622781. Delivery is required within 5 days of award. The contract is governed by the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical standards identified by R or I numbers. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies per RQ011. This material has no shelf life requirement. The solicitation, issued under number SPE8E5-26-T-3725, was posted on July 29, 2026, with a response deadline of August 10, 2026. It is classified as a fully competitive procurement under a military specification and falls under NAICS code 333992. The procuring agency is the Defense Logistics Agency, part of the Department of Defense, with performance occurring in Tampa, Florida, 33621. Primary point of contact is Ira Hedgepeth, reachable via email and phone. All technical and quality requirements are subject to the DLA Master List version effective as of the solicitation issue date, and this procurement is subject to potential covered defense information regulations.

Welding and Soldering Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

SUTURE KIT, SURGICAL

Solicitation # SPE2DS-26-T-284G

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a SUTURE KIT, SURGICAL with NSN 6515-01-309-3551, requesting a quantity of four units. The solicitation, identified by number SPE2DS-26-T-284G, was posted on July 29, 2026, with responses due by August 4, 2026. This procurement is designated as a federal action and does not specify any set-aside preferences or NAICS codes. The kits are intended for delivery to a U.S.-based performance location, though no specific city or state is provided. All inquiries and submissions must be directed through the DIBBS platform via the provided UI link, and no point of contact information is listed in the solicitation details.

Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE