This Subcontract opportunity from Texas was posted on January 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Calibration Certificates and Manuals (1 Lot)

Closed

State & Local

Submission Closed01/30/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Critical Application Inspection and TestingThis subcontract for Critical Application Inspection and Testing supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent dimensional inspections and material verification for 17 units, utilizing calibrated Measuring and Test Equipment in accordance with requirement RT001. All work is to be performed in New Cumberland, Pennsylvania. To be eligible, the contractor must hold ISO 9001 or SAE AS9003 certification. Key deliverables include the submission of detailed inspection reports and a formal certification of compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Specialized Aerospace Inspection and TestingThis subcontract for Specialized Aerospace Inspection and Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform independent inspection and acceptance testing for prime contractors at Tinker AFB. Primary responsibilities include verifying dimensions and tolerances against TDP Rev A Gen 2 and executing Quality Assurance Plan 13873 SQAP-017105073. To ensure precision, the contractor must utilize CMM or high-precision metrology tools and maintain ISO 9001:2015 certification. Required deliverables consist of detailed inspection reports and Certificates of Conformance. The solicitation is categorized under NAICS code 541380, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires a First Article Test Specialist to validate manufacturing processes for prime contractors. The scope of work involves performing testing on one unit of NSN 5935-00-134-0406 using specialized equipment to ensure compliance with MIL-DTL-2726/36C specifications. The performance location for this contract is Tracy, California. The selected contractor must coordinate closely with the Contracting Officer and Quality Assurance Representative to deliver a validated sample unit and a DCMA-approved test report. A formal First Article Test Report must be submitted within 90 calendar days of the contract date. This opportunity falls under NAICS code 541380, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article and Product Verification Testing (FAT/PVT)This subcontract involves providing independent testing and validation services for Safety Switch Assemblies supporting DLA Weapons Support, Land Supply Chain contracts. The scope of work focuses on conducting First Article Testing and Product Verification Testing in accordance with procurement note E05, utilizing specialized metrology equipment and firearm functional testing benches to ensure component compliance. The selected provider is responsible for delivering certified test reports and pass/fail validation documentation. This performance takes place in Tracy, California, under NAICS code 541380, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

First Article Testing (FAT)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves performing First Article Testing for prime contractors on government hardware procurements. The primary objective is to validate the quality and specifications of mounting brackets by executing rigorous FAT protocols to ensure structural and dimensional integrity prior to the commencement of full production. The selected provider will utilize specialized testing facilities to verify all technical specifications, ultimately delivering a comprehensive First Article Test Report and formal certification. This requirement is categorized under NAICS code 541380, with the place of performance located in New Cumberland. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Test (FAT) and Technical ReportingThis subcontract, titled First Article Test (FAT) and Technical Reporting, involves performing First Article Testing for prime contractors on DLA Weapons Support ASC projects. The primary objective is to validate manufacturing processes and ensure product compliance for NSN 3120-01-436-1789 through the use of precision metrology and inspection equipment. The work is to be performed in Bremerton, Washington, under NAICS code 541380. The selected contractor must maintain ISO 9001 or SAE AS9003 quality systems and ensure strict ITAR/EAR compliance when handling technical data. The project deliverables include one FAT unit and a comprehensive FAT report, both of which must be submitted within 90 calendar days. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days

AI Contract Overview

The Texas Water Development Board is seeking a subcontractor for the supply of calibration certificates and user manuals for 60 rain gauges. A critical requirement of this contract is that all provided documentation must be NIST-traceable to ensure measurement accuracy and standardization. This opportunity was posted on January 16, 2026, with a response deadline of January 30, 2026. The project is categorized under NAICS code 541380 and is organized as a single lot for the delivery of these essential technical documents.