Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Certified Mercury-Free Raw Materials for Valve Disk

Open

Federal

Response Deadline11/16/2026, 03:30:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified mercury-free raw metal stock for valve disks to support prime contractors on NAVSUP Weapon Systems Support projects for the Department of Defense. The selected provider must source high-grade alloys in accordance with TDP O22 and ensure all materials meet Special Emphasis Level I purity standards. To verify compliance, the contractor is required to deliver comprehensive material certifications and Mill Test Reports alongside the raw stock. Eligible candidates must maintain ISO-9001 certification to ensure quality management standards are met. This opportunity falls under NAICS code 331210 and was posted on October 15, 2026, with a response deadline of November 16, 2026.

General Info

Supply certified mercury-free raw metal stock for DoD valve disks by November 16.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QNE11.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

DISK,VALVE — 4820014068404 — N0010426QNE11

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 03:30:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified mercury-free raw metal stock for prime contractors on NAVSUP Weapon Systems Support projects. Sources high-grade alloys per TDP O22 and provides Mill Test Reports to verify compliance with Special Emphasis Level I purity standards. Requires ISO-9001 certification. Delivers certified raw material stock and accompanying material certifications.

Similar Contracts

Same NAICS industry code

Raw Material Supply for Spur Gear FabricationThis subcontract involves the supply of certified raw alloy or metal stock intended for spur gear fabrication on DLA Weapons Support projects. The selected provider must source and deliver materials that strictly adhere to the chemical and physical properties outlined in the technical data package for NSN 30200153901. Performance for this contract will take place in Texarkana, Texas, under NAICS code 331210. Crucial compliance requirements include the provision of Mill Test Reports and formal certifications confirming that the materials are free from hexavalent chromium and Class I ozone-depleting chemicals. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, for the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, titled Aerospace Grade Raw Material Supply, involves the provision of certified raw metals and alloys for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the delivery of materials that strictly adhere to technical drawings for NSN 1450-01-657-9533, with all shipments delivered directly to the fabricator. Essential documentation must accompany the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with Federal Standard No. 313. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. The project falls under NAICS code 331210 and specifies Portsmouth, 03801-5000, as the place of performance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, involves the supply of certified aerospace-grade raw material stock. The scope of work focuses on providing alloy billets or forgings specifically for the production of Linear Actuating Cylinder Heads for prime contractors. Performance for this contract is centered at Tinker AFB. A critical requirement of the agreement is strict adherence to DFARS 252.225-7001 Buy American regulations. To ensure quality and regulatory compliance, all delivered materials must include full traceability and accompanying Mill Test Reports. The opportunity is categorized under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Critical Grade Stainless Steel SupplyThis subcontract, titled Critical Grade Stainless Steel Supply, involves the provision of certified high-grade stainless steel raw materials for prime contractors working on DLA Weapons Support Maritime Hardware projects. The scope of work specifically focuses on sourcing materials for critical-application socket weld valve bodies, ensuring all supplies comply with the Buy American and Balance of Payments Program. To maintain quality and safety standards, the provider must deliver certified stainless steel stock accompanied by Mill Test Reports and Safety Data Sheets. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331210. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Supply of Qualified Raw Materials for Support RodsThis subcontract involves the supply of certified raw materials for support rods to prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The provider is required to source materials strictly from the Qualified Products List or Qualified Manufacturers List as specified by Drawing NR 19200 12940982. All deliveries must include Mill Test Reports and certifications of origin to ensure quality and compliance. The contract mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this requirement is centered in Anniston, Alabama, under NAICS code 331210. Interested parties must respond by November 19, 2026, to provide the necessary certified raw material stock for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Metal Stock SupplyThis subcontract involves the procurement and delivery of aerospace-grade metal stock, including billet, bar, or plate, to support prime contractors on DLA Weapons Support ASC projects. The materials must strictly adhere to the specifications outlined in Basic Drawing NR 19207 11673854 Revision E and be delivered to the designated fabricator. To ensure full traceability and regulatory compliance, the supplier is required to provide Mill Test Reports and maintain strict adherence to ITAR and EAR export controls during material handling. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, the project is categorized under NAICS code 331210. Performance of the contract will take place in Anniston, Alabama. Interested parties must respond by November 16, 2026, to be considered for this supply requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Hydraulic Grade Material SupplyThis subcontract, titled Hydraulic Grade Material Supply, involves the provision of raw metal stock and billets for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The supplier is responsible for delivering certified raw materials accompanied by Mill Test Reports, ensuring all materials strictly adhere to specifications outlined in drawings 80020 6534C554, 80020 6534D688, 80020 6300-001, and 80020 6530C124. Additionally, the contractor must maintain full compliance with the Buy American Act and the Balance of Payments Program. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210, with the place of performance located in New Cumberland. Interested parties must respond by November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Berry Amendment Compliant Raw Material SupplyThis subcontract involves the sourcing and delivery of raw metal and alloy stock to support prime contractors working on DLA Weapons Support projects. The supplier is responsible for providing materials that strictly adhere to Drawing NR 19207 12612820 specifications and delivering the certified stock directly to the designated fabricator. A critical requirement of this agreement is the provision of full traceability and certification of origin to ensure compliance with the Berry Amendment and the Buy American Act. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Steel Tubing SupplyThis subcontract, titled Aerospace-Grade Steel Tubing Supply, involves the provision of raw steel tubing for prime contractors working on projects for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for sourcing material that adheres to the specific alloy and tolerance requirements of Rev E for NSN 4710-01-189-1838. To ensure full compliance with DFARS domestic material restrictions and prohibited substance standards, the provider must supply Mill Test Reports and Certificates of Conformance upon delivery of the tubing to the fabricator. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 331210. Performance for this contract will take place at Tinker AFB. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of CRES Metallic Tubing (NSN 4710-01-102-6415)This subcontract involves the supply of 281 feet of plain round, straight seamed CRES steel tubing for the DLA Weapons Support Fluid Handling Division. The tubing must feature a 1.00 inch outer diameter and a 0.052 inch wall thickness, conforming strictly to SAE AMS5561H standards. Additionally, the contractor is required to apply continuous identification marking according to SAE-AMS-STD-185 and provide metal certification through CDRL DD Form 1423s. The project requires all materials to be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance for this contract is centered in San Diego, California, under NAICS code 331210. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for Lower Track FabricationThis subcontract focuses on the supply of raw metals and alloys for lower track fabrication in support of DLA Weapons Support Land Supply Chain projects. The provider must deliver certified raw materials that strictly adhere to the chemical and physical properties specified in Drawing NR 78286 65302-12018. To ensure quality and compliance, the contractor is required to provide Mill Test Reports for full traceability and guarantee that all materials are free of Class I Ozone Depleting Chemicals. The project is managed under NAICS code 331210 and will be performed in Cherry Point. Access to necessary technical data requires JCP certification. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense initiative.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for NSN 5310-00-927-9400This subcontract involves the supply of certified raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of metal sheets, coils, or bars that strictly adhere to the chemical and physical properties specified in the technical data for NSN 5310-00-927-9400. To ensure full traceability, the supplier must provide Material Test Reports or Certificates of Conformance with all deliveries made to the manufacturer. Managed by the Department of Defense under NAICS code 331210, the contract mandates strict compliance with ITAR and EAR export controls. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

59--CONNECTOR,PLUG,ELEC

Solicitation # N0010427PBE24

This presolicitation notice, issued by the Navsup Weapon Systems Support Mech under solicitation number N0010427PBE24, is for the procurement of two electrical plug connectors identified by NSN 1H-5935-015040777-PP and TDP Version 005. The government intends to negotiate with a single source, specifically issuing to Adirondack Electronics Inc, with deliveries designated for DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. While the government currently intends to pursue a non-competitive action, interested parties may submit quotes or identify their capabilities to be considered prior to the award date. The government maintains full rights to the technical data, and the data package is complete with no engineering, tooling, or manufacturing restrictions, indicating that these parts are candidates for full and open competition.

Electronic Connector Manufacturing

POSTED

DEADLINE

12--PERISCOPE SUBASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010427RYA60

The Department of Defense, through the Navsup Weapon Systems Support Mech, is seeking a single source to provide eight periscope subassemblies under NSN 7H-1240-015583565, TDP VER 009. Delivery is specified as FOB Origin. Because the government does not own the necessary data rights and has determined that purchasing those rights or reverse engineering the part is uneconomical, the agency intends to negotiate with only one source per FAR 6.302-1. This presolicitation notice is not a request for competitive proposals, though the government will consider capability statements and proposals received within 45 days of publication. Interested parties may also notify the contracting officer within 15 days if a commercial item can satisfy the requirement. The acquisition is subject to specific Free Trade Agreements and the Buy American Act depending on the final solicitation clauses.

Ship Building and Repairing

POSTED

DEADLINE

in about 1 month

Supply of Replacement Parts for Check Valve (NSN 4820-01-149-8984)This subcontract with the Department of Defense, specifically for Navsup Weapon Systems Support Mech, involves the supply of replacement parts, seals, and gaskets for check valves under NSN 4820-01-149-8984. The contractor is responsible for manufacturing or sourcing components that strictly adhere to OEM specifications and CAGE 98939 requirements, ensuring all certified replacement components are delivered directly to the designated repair facility. Under the terms of the agreement, the provider must submit technical drawings and formal justifications for any proposed material or design substitutions, which remain subject to government approval. The project falls under NAICS code 332919, with a response deadline set for December 7, 2026.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Repair and Overhaul of Check Valve (NSN 4820-01-149-8984)This subcontract involves the repair and overhaul of check valves, specifically NSN 4820-01-149-8984, for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes the teardown, evaluation, repair, and modification of these valves to ensure they meet operational requirements in accordance with authorized technical orders and repair manuals. The selected provider must be an Authorized Repair Source and is responsible for the final delivery of repaired, tested, and packaged units. Compliance requirements include the implementation of IUID per DFARS 252.211-7003 and marking standards per MIL-STD-130. This opportunity falls under NAICS code 811210 and is issued by the Department of Defense. Interested parties must submit their responses by the deadline of December 7, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

Military Grade Packaging and Palletization ServicesThis subcontract for Military Grade Packaging and Palletization Services supports prime contractors on Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves specialized packaging, labeling, and palletization of items to ensure they are ready for FOB Destination delivery. All work must strictly adhere to military standards, specifically MIL-STD-2073-1 and MIL-STD-129 for packaging and labeling, and MIL-STD-147 and ANSI MH1-2016 for palletization, utilizing MIL-DTL-24496B Class 2 materials. A critical requirement for this contract is that the provider must hold a HAZMAT labeling certification. The opportunity was posted on November 6, 2026, with a response deadline of December 7, 2026. It is categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

DEADLINE

Activated Charcoal Supplier (NSN 6810-00-128-8031)This subcontract involves the supply of two units of activated charcoal for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected supplier is responsible for manufacturing or sourcing charcoal that strictly conforms to NSN 6810-00-128-8031 and IRPOD specifications, which includes the requirement to perform production lot testing. To ensure operational safety and security, all materials must meet Oxygen Clean requirements according to MIL-STD-1330. Additionally, the contractor must maintain CMMC compliance and possess the necessary capabilities for handling HAZMAT materials. Responses for this opportunity are due by December 7, 2026.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

Socket Head Cap Screw Supply (NSN 5305-01-702-9638)This subcontract involves the manufacture and supply of six specialized socket head cap screws, identified by NSN 5305-01-702-9638, for prime contractors supporting NAVSUP Weapons Systems Support projects under the Department of Defense. The contractor is required to adhere to strict military standards, specifically performing physical identification and marking according to MIL-STD-130, REV N, and ensuring packaging meets MIL-STD-2073 requirements. Operating under NAICS code 332510, the provider must maintain DPAS DO certification to prioritize these items for national defense. The solicitation was posted on November 6, 2026, with a response deadline set for December 7, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Preservation ServicesThis subcontract for Military-Grade Packaging and Preservation Services supports prime contractors on NAVSUP Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves executing specialized packaging, marking, and preservation tasks to prevent corrosion and ensure equipment durability. All activities must strictly adhere to MIL-STD-2073-1 mandates, utilizing military-specification crates, desiccants, and vacuum sealing equipment to prepare modules for FOB Origin shipment. The project falls under NAICS code 339999 and requires the precise application of preservation treatments and standardized container marking. Interested parties should note the response deadline of November 13, 2026, at 8:30 PM. The final deliverable consists of fully packaged and preserved modules ready for transport according to rigorous military standards.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Precision Machining and Fabrication of Repair Module, StraiThis subcontract involves the precision machining and fabrication of three Repair Module, Strai units for prime contractors supporting the Department of Defense agency Navsup Weapon Systems Support Mech. The selected provider must utilize precision CNC equipment to fabricate and machine components in strict accordance with TDP Version 004. All deliverables must adhere to MIL-STD-130 for physical identification marking and MIL-STD-2073-1 for packaging requirements. Compliance with NIST SP 800-171 is mandatory for the handling of Controlled Unclassified Information, and contractors who are not the original manufacturer must obtain OEM authorization. The project falls under NAICS code 332710, with a response deadline set for November 13, 2026.

POSTED

DEADLINE

Supply of IEM/MM TACTICL EHF ComponentsThis subcontract, managed by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the procurement of 36 IEM/MM TACTICL EHF components (NSN 1HM 5935-01-573-3988). These components are destined for prime contractors supporting projects at the US Navy Portsmouth Naval Shipyard. The scope of work requires the manufacturer or source to provide units that strictly adhere to Critical Safety Item standards and Higher-Level Quality Requirements as specified in FAR 52.246-11. The contract mandates full compliance with Buy American and Balance of Payments regulations to ensure domestic sourcing requirements are met. All 36 certified units must be delivered directly to the shipyard. The opportunity is categorized under NAICS code 334220, with a response deadline set for November 13, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

DEADLINE

Marine-Grade Door Hardware and Components SupplyThis subcontract involves the supply of specialized marine-grade door hardware, including hinges, latches, seals, and handles, for the USS Dwight D Eisenhower (CVN 69). Working under the Navsup Weapon Systems Support Mech for the Department of Defense, the supplier must provide components that adhere to Cage Code 86700 design requirements. All hardware must be manufactured from specialized alloys or marine-grade stainless steel to ensure durability in maritime environments. To verify quality and corrosion resistance, the supplier is required to provide mill test reports for the materials used. The scope of work concludes with the delivery of these hardware components directly to the prime manufacturer. This procurement falls under NAICS code 332510 and was posted on November 6, 2026, with a response deadline of November 16, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Naval Vessel Door Manufacturing (NIIN LLCYB2713)This subcontract involves the manufacture of a single specialized door unit for the USS Dwight D Eisenhower (CVN 69) under the Navsup Weapon Systems Support Mech. The contractor is responsible for fabricating the door assembly according to Cage Code 86700 design B-N0100-M item 00004, ensuring all work adheres to strict military standards. Specifically, marking must be performed per MIL-STD-130, REV N, and packaging must comply with MIL-STD-2073. The project falls under NAICS code 332999 and requires the contractor to provide OEM authorization if they are not the original manufacturer. Interested parties must respond by November 16, 2026, to fulfill this Department of Defense requirement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS