Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Conductive Materials for RF Contact Strips

Active

Federal

Response Deadline10/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of high-conductivity raw materials and semi-finished plated metal strips, specifically Beryllium Copper or silver-plated alloys, to support prime contractors fulfilling DLA supply contracts. The materials must meet the specifications for NSN 5940-00-168-8134 and be delivered as certified raw material stock. To ensure full compliance, the provider must furnish Material Certifications and Mill Test Reports that adhere to the Buy American Act and the Berry Amendment. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332431. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 20, 2026, for this procurement of conductive materials intended for RF contact strips.

General Info

Supply of Beryllium Copper and silver-plated alloys for DLA RF contact strips.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

332431 - Metal Can Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-0515.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTACT STRIP, RADIO FR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineOct 20

Submission deadline

Response Deadline

10/20/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies high-conductivity raw materials or semi-finished plated metal strips for prime contractors delivering DLA supply contracts. Provides metal stock such as Beryllium Copper or silver-plated alloys meeting specifications for NSN 5940-00-168-8134. Provides Material Certifications and Mill Test Reports ensuring compliance with the Buy American Act and Berry Amendment. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Alclad Aluminum Sheet Metal SupplierThis subcontract involves the supply of 41 Alclad aluminum metal sheets to prime contractors supporting Department of Defense supply contracts through Construction and Equipment MRO SVC I. The required materials must feature a 0.0013 inch cladding on both sides, an overall thickness of 0.032 inches, and dimensions of 48 inches wide by 144 inches long. The supplier is responsible for ensuring all materials comply with RA001 technical and quality requirements and are packaged according to MIL-STD-2073-1E. Performance for this contract is centered at Robins Air Force Base, and the solicitation is categorized under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supplier of 7075-T6 MRS Aluminum Sheet MetalThis subcontract, issued by the Department of Defense through the DLA Fleet Readiness Center, seeks a supplier to provide 14,400 units of 7075-T6 MRS aluminum sheet metal. The material must be sourced or manufactured to specific dimensions of .040 inches by 48 inches by 144 inches and must strictly adhere to SAE AMS4049 standards and Minimum Residual Stress properties. The contract requires rigorous quality control, including sampling per MIL-STD-1916 and the provision of a Certificate of Quality Conformance. Packaging must comply with ASTM D3951 and MIL-STD-129 standards. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332431, intended for prime contractors supporting DLA Aviation supply contracts.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

in about 5 hours

Aluminum Alloy 7075-T6 Sheet ProductionThis subcontract involves the production of 156 specialized aluminum alloy metal sheets for prime contractors supporting Department of Defense DLA supply contracts. The sheets must measure 0.125 inches by 48 inches by 144 inches and strictly conform to Alloy 7075 Temper T6 and SAE AMS4045M standards. Manufacturing requires the use of industrial smelting, rolling facilities, and precision cutting equipment to ensure all technical specifications are met. The contractor must maintain strict compliance with ASTM B660, MIL-STD-2073-1E, MIL-STD-129, and ASTM B666, providing a Certificate of Quality Compliance upon delivery. Performance will take place at Robins Air Force Base. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026, under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Aluminum Alloy Plate Supplier (NSN 9535-00-975-2727)This subcontract, issued by Construction & Equipment MRO SVC I for the Department of Defense, requires the supply of 13 precision-cut aluminum alloy plates under NSN 9535-00-975-2727. The plates must be fabricated to dimensions of 0.250 inches by 36 inches by 96 inches and must strictly adhere to ASTM B660 and ASTM B666 standards. Performance will take place at Hill AFB, with all deliverables requiring Mill-Material Certification and comprehensive quality compliance documentation. The supplier must ensure all items are marked and packaged in accordance with MIL-STD-129 and MIL-STD-2073-1E standards to support prime contractors delivering DLA supply contracts. The opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026, falling under NAICS code 332431.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Aerospace-Grade Ducting MaterialsThis subcontract, titled Supply of Aerospace-Grade Ducting Materials, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. The contract requires the provision of certified aerospace-grade alloys or composites specifically meeting the requirements of Drawing NR 77272 901–325–423. The selected supplier is responsible for delivering these raw materials to the fabricator while ensuring full material traceability and providing mill test reports from approved sources. Performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the materials and the agency involved, the supplier must maintain strict compliance with ITAR and EAR export controls. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Fabrication of Round Cans (NSN 8145-01-727-6255)This subcontract involves the fabrication of 13,000 round metal cans under NSN 8145-01-727-6255 for prime contractors supporting DLA Troop Support projects. The manufacturing process must strictly adhere to reference drawing 18876 11465617 and the DLA Master List of Technical and Quality Requirements. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The project is managed by Construction and Equipment Containers for the Department of Defense under NAICS code 332431. Compliance with the Buy American Act and DFARS 252.204-7012 is mandatory for all materials used. The final deliverable consists of 13,000 completed units.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8ED-27-Q-0041

Solicitation SPE8ED-27-Q-0041 is a request for quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 13 units of Round Cans, identified by NSN 8145-01-727-6255. The items must be delivered by August 10, 2027, with a delivery lead time of 90 days after order. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination. Technical requirements are governed by the DLA Master List of Technical and Quality Requirements, and the items must adhere to specific technical data packages and drawings, including reference drawing 18876 11465617. Packaging must comply with RP001 DLA Packaging Requirements for Procurement and ASTM D3951, with marking and labeling following MIL-STD-129. Quality assurance is strictly managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The solicitation incorporates several critical federal and defense clauses, including DFARS 252.204-7012 for safeguarding covered defense information and various Buy American Act certifications. Invoicing and payment are to be processed electronically via the Wide Area WorkFlow system. Quotations must be submitted to the Philadelphia office by October 20, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Silver Plating Material SupplyThis subcontract involves the supply of high-purity silver plating chemicals and materials to support prime contractors working with the DLA Weapons Support Active Devices Division. The scope of work specifically requires the provision of industrial grade silver plating solutions or bullion that meet the S designation for part number F09B250V3AS. All delivered materials must be certified and accompanied by the necessary Certificates of Conformance and Material Safety Data Sheets. The contract is categorized under NAICS code 332431 and is managed by the Department of Defense. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 23, 2026, to ensure all requirements for the delivery of certified silver plating materials to the manufacturer are met.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Aerospace-Grade Structural MaterialsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the supply of certified aerospace-grade structural alloys or composites for prime contractors. The materials must be sourced according to Sikorsky technical data for part number 71500-22104-058 and delivered to Tracy, California. The contractor is required to provide full supply chain traceability, including Mill Test Reports and Material Certifications. Additionally, all deliverables must strictly adhere to the Buy American Act and DFARS domestic sourcing regulations to ensure compliance with federal procurement standards.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Silver Plating Material SupplyThis subcontract opportunity involves the supply of high-purity silver or silver-plating solutions to support prime contractors working with the DLA Weapons Support Active Devices Division. The materials must strictly adhere to technical standards for MIL-PRF-15160 compliance and include Certificates of Conformance to verify military grade specifications. Additionally, all provided materials must comply with Berry Amendment domestic sourcing requirements. The contract is categorized under NAICS code 332431 and is associated with the Department of Defense. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, following the posting date of October 12, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Primer and Topcoat ApplicationThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC, involves the application of industrial primer and topcoat for prime contractors. The scope of work focuses on delivering fully painted and finished shims that adhere to strict military thickness and adhesion standards. To ensure quality and durability, the contractor must perform daily adhesion checks following ASTM 3359 Method B, conduct thickness measurements, and complete 336-hour salt spray corrosion testing to verify the absence of rust and minimal blistering. The project is categorized under NAICS code 332431 and will be performed in New Cumberland. A critical requirement for this contract is JCP certification, which is necessary for the handling of technical data. Interested parties should note the response deadline of October 20, 2026, for this precision coating engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Aerospace-Grade Alloy Sheet/PlateThis subcontract, titled Supply of Aerospace-Grade Alloy Sheet/Plate, involves the procurement of raw aerospace-grade metal alloys intended for prime contractors fulfilling DLA supply contracts for aircraft skins. The scope of work includes sourcing and certifying raw materials to meet strict aerospace standards, providing Mill Test Reports to ensure full traceability, and cutting raw stock to size for fabrication. The opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Div and is designated as a Total Small Business Set-Aside. Performance will take place at Tinker AFB, and the contract falls under NAICS code 332431. The solicitation was posted on October 12, 2026, with a response deadline of October 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Forwarding ServicesThis subcontract for MIL-SPEC Packaging and Freight Forwarding Services involves providing specialized military packaging, marking, and shipping for 165 precision components. The work must be performed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001, specifically utilizing preservation method 33 and wrap material GCH. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope includes coordinating FOB Origin shipment to the freight forwarder A.J. Worldwide Services for final delivery to Kayseri, Turkey. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Precision Machining and Fabrication of Load Balls (PN 191B36-5)This subcontract involves the precision machining and fabrication of 165 Load Balls for screwjacks, identified as part number 191B36-5 and NSN 1680000896121. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider must utilize CNC machining and grinding equipment to ensure all units meet strict tolerances and comply with the Buy American Act and Berry Amendment regarding material sourcing. Quality assurance is a critical component of the contract, requiring adherence to SAE AS9003 or ISO 9001 inspection standards. Additionally, the manufacturer must implement zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable consists of 165 finished units intended for prime contractors fulfilling DLA supply contracts.

POSTED

about 19 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Incandescent Lamps (MS25231-313R)This subcontract involves the supply of 1,429 mercury-free incandescent lamps, specifically NSN 6240001557919 and Part Number MS25231-313R, for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The lamps must be manufactured or sourced in strict accordance with SAE aeronautical specification AS25050 and marked as 313R. Performance of this contract will take place in Greensboro, North Carolina. To ensure operational standards, the provider must maintain quality control systems compliant with either SAE AS9003 or ISO 9001. Additionally, all deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026, under NAICS code 335139.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129 and RP001. Specific technical requirements include the application of packaging data QUP 001 and Pres Mthd 10 to ensure all materials meet Department of Defense standards. The primary objective is the delivery of a shipment-ready actuator to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This effort falls under NAICS code 488510 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is October 23, 2026.

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 19 hours ago

DEADLINE

Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

Fabrication of Panel Housings/FramesThis subcontract involves the fabrication of 35 physical panel housings and frames for prime contractors supporting DLA Weapons Support ASC projects. The scope of work includes precision machining, molding, and the cutting of apertures for mounting hardware and light indicators. Additionally, the contractor is responsible for applying specific finishes and coatings in accordance with the technical data provided for NSN 6220010310292. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The contract falls under NAICS code 332710, and interested parties must adhere to the response deadline of October 23, 2026.

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS