Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Cresty 304 Seamless Metallic Tubing

Open

Federal

Response Deadline11/19/2026, 10:00:00 AM MST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of 705 feet of Cresty 304 seamless, round metallic tubing for the Department of Defense DLA Weapons Support Fluid Handling Division. The tubing must be 1 inch in diameter with a 0.035 inch wall thickness, produced in a cold-drawn, 1/8 hard condition that adheres strictly to AMS-T 6845 specifications. Performance will take place at Hill AFB, and the contractor is required to utilize cold-drawing equipment and follow MIL-STD-1916 or ASQ H1331 sampling plans. The selected provider must deliver the materials along with a Certificate of Quality Compliance to ensure all technical standards are met. This opportunity falls under NAICS code 331210, with a response deadline set for November 19, 2026.

General Info

Supply 705 feet of 304 seamless tubing for DoD by November 19, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

331210 - Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-2998.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TUBE, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 10:00:00 AM MSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies seamless, round metallic tubing for prime contractors on DLA Weapons Support Fluid Handling Division projects. Manufactures or sources tubing meeting AMS-T 6845 specifications, 1-inch diameter with 0.035-inch wall thickness in a cold-drawn, 1/8 hard condition. Requires cold-drawing equipment and adherence to MIL-STD-1916 or ASQ H1331 sampling plans. Delivers 705 feet of tubing with a Certificate of Quality Compliance.

Similar Contracts

Same NAICS industry code

Raw Material Supply for Spur Gear FabricationThis subcontract involves the supply of certified raw alloy or metal stock intended for spur gear fabrication on DLA Weapons Support projects. The selected provider must source and deliver materials that strictly adhere to the chemical and physical properties outlined in the technical data package for NSN 30200153901. Performance for this contract will take place in Texarkana, Texas, under NAICS code 331210. Crucial compliance requirements include the provision of Mill Test Reports and formal certifications confirming that the materials are free from hexavalent chromium and Class I ozone-depleting chemicals. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, for the Department of Defense agency DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, titled Aerospace Grade Raw Material Supply, involves the provision of certified raw metals and alloys for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the delivery of materials that strictly adhere to technical drawings for NSN 1450-01-657-9533, with all shipments delivered directly to the fabricator. Essential documentation must accompany the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with Federal Standard No. 313. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, this opportunity is designated as a Total Small Business Set-Aside under FAR 19.5. The project falls under NAICS code 331210 and specifies Portsmouth, 03801-5000, as the place of performance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Aerospace Grade Raw Material SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, involves the supply of certified aerospace-grade raw material stock. The scope of work focuses on providing alloy billets or forgings specifically for the production of Linear Actuating Cylinder Heads for prime contractors. Performance for this contract is centered at Tinker AFB. A critical requirement of the agreement is strict adherence to DFARS 252.225-7001 Buy American regulations. To ensure quality and regulatory compliance, all delivered materials must include full traceability and accompanying Mill Test Reports. The opportunity is categorized under NAICS code 331210.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Critical Grade Stainless Steel SupplyThis subcontract, titled Critical Grade Stainless Steel Supply, involves the provision of certified high-grade stainless steel raw materials for prime contractors working on DLA Weapons Support Maritime Hardware projects. The scope of work specifically focuses on sourcing materials for critical-application socket weld valve bodies, ensuring all supplies comply with the Buy American and Balance of Payments Program. To maintain quality and safety standards, the provider must deliver certified stainless steel stock accompanied by Mill Test Reports and Safety Data Sheets. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331210. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Supply of Qualified Raw Materials for Support RodsThis subcontract involves the supply of certified raw materials for support rods to prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The provider is required to source materials strictly from the Qualified Products List or Qualified Manufacturers List as specified by Drawing NR 19200 12940982. All deliveries must include Mill Test Reports and certifications of origin to ensure quality and compliance. The contract mandates strict adherence to the Buy American and Balance of Payments Program. Performance for this requirement is centered in Anniston, Alabama, under NAICS code 331210. Interested parties must respond by November 19, 2026, to provide the necessary certified raw material stock for the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Metal Stock SupplyThis subcontract involves the procurement and delivery of aerospace-grade metal stock, including billet, bar, or plate, to support prime contractors on DLA Weapons Support ASC projects. The materials must strictly adhere to the specifications outlined in Basic Drawing NR 19207 11673854 Revision E and be delivered to the designated fabricator. To ensure full traceability and regulatory compliance, the supplier is required to provide Mill Test Reports and maintain strict adherence to ITAR and EAR export controls during material handling. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, the project is categorized under NAICS code 331210. Performance of the contract will take place in Anniston, Alabama. Interested parties must respond by November 16, 2026, to be considered for this supply requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Hydraulic Grade Material SupplyThis subcontract, titled Hydraulic Grade Material Supply, involves the provision of raw metal stock and billets for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The supplier is responsible for delivering certified raw materials accompanied by Mill Test Reports, ensuring all materials strictly adhere to specifications outlined in drawings 80020 6534C554, 80020 6534D688, 80020 6300-001, and 80020 6530C124. Additionally, the contractor must maintain full compliance with the Buy American Act and the Balance of Payments Program. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 331210, with the place of performance located in New Cumberland. Interested parties must respond by November 19, 2026, following the posting date of November 8, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

Berry Amendment Compliant Raw Material SupplyThis subcontract involves the sourcing and delivery of raw metal and alloy stock to support prime contractors working on DLA Weapons Support projects. The supplier is responsible for providing materials that strictly adhere to Drawing NR 19207 12612820 specifications and delivering the certified stock directly to the designated fabricator. A critical requirement of this agreement is the provision of full traceability and certification of origin to ensure compliance with the Berry Amendment and the Buy American Act. The performance of this contract is centered in Tracy, California, under the oversight of the Department of Defense and the DLA Weapons Support LSO Combat Vehicles and Armament.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 5 hours ago

DEADLINE

Aerospace-Grade Steel Tubing SupplyThis subcontract, titled Aerospace-Grade Steel Tubing Supply, involves the provision of raw steel tubing for prime contractors working on projects for the DLA Weapons Support Fluid Handling Division. The supplier is responsible for sourcing material that adheres to the specific alloy and tolerance requirements of Rev E for NSN 4710-01-189-1838. To ensure full compliance with DFARS domestic material restrictions and prohibited substance standards, the provider must supply Mill Test Reports and Certificates of Conformance upon delivery of the tubing to the fabricator. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 331210. Performance for this contract will take place at Tinker AFB. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of CRES Metallic Tubing (NSN 4710-01-102-6415)This subcontract involves the supply of 281 feet of plain round, straight seamed CRES steel tubing for the DLA Weapons Support Fluid Handling Division. The tubing must feature a 1.00 inch outer diameter and a 0.052 inch wall thickness, conforming strictly to SAE AMS5561H standards. Additionally, the contractor is required to apply continuous identification marking according to SAE-AMS-STD-185 and provide metal certification through CDRL DD Form 1423s. The project requires all materials to be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. Performance for this contract is centered in San Diego, California, under NAICS code 331210. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for Lower Track FabricationThis subcontract focuses on the supply of raw metals and alloys for lower track fabrication in support of DLA Weapons Support Land Supply Chain projects. The provider must deliver certified raw materials that strictly adhere to the chemical and physical properties specified in Drawing NR 78286 65302-12018. To ensure quality and compliance, the contractor is required to provide Mill Test Reports for full traceability and guarantee that all materials are free of Class I Ozone Depleting Chemicals. The project is managed under NAICS code 331210 and will be performed in Cherry Point. Access to necessary technical data requires JCP certification. Interested parties should note the response deadline of November 19, 2026, for this Department of Defense initiative.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Raw Material Supply for NSN 5310-00-927-9400This subcontract involves the supply of certified raw metal stock for prime contractors working on DLA Weapons Support ASC projects. The scope of work requires the provision of metal sheets, coils, or bars that strictly adhere to the chemical and physical properties specified in the technical data for NSN 5310-00-927-9400. To ensure full traceability, the supplier must provide Material Test Reports or Certificates of Conformance with all deliveries made to the manufacturer. Managed by the Department of Defense under NAICS code 331210, the contract mandates strict compliance with ITAR and EAR export controls. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Supply of Packing Assembly (NSN 5330-01-397-7530)This subcontract involves the supply of 667 Packing Assemblies (NSN 5330-01-397-7530) for the DLA Weapons Support Fluid Handling Division. The selected provider must source authentic parts from approved manufacturers, specifically Marvin Engineering, Saint-Gobain, or Trelleborg, while maintaining full traceability. All deliveries to DLA Distribution must adhere to MIL-STD-129 and MIL-STD-2073-1E marking standards. The opportunity is a total small business set-aside under NAICS code 423840, with performance taking place at Robins Air Force Base. To be eligible, contractors must hold JCP certification and meet CMMC Level 2 requirements. Responses are due by November 19, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Packing Assembly (NSN 5330-01-397-7530)This subcontract, issued by the Department of Defense for the DLA Weapons Support Fluid Handling Division, requires the manufacture and delivery of 667 warranted packing assemblies under NSN 5330-01-397-7530. Production must strictly adhere to source-controlled drawing NR 98752 9436127, Rev B, and includes a mandatory First Article Test. Finished items must be packaged in MIL-DTL-117 Type II Class C Style 1 bags, with performance taking place at Robins Air Force Base. The opportunity is a total small business set-aside under NAICS code 339991. To be eligible, contractors must maintain approved source status, hold JCP certification for ITAR and EAR data, and meet CMMC Level 2 cybersecurity requirements. The response deadline for this solicitation is November 19, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720200082546)This subcontract involves the supply of two nonmetallic hose assemblies, identified by NSN 4720200082546 and Part Number E2D-PA1RV, for prime contractors under the DLA Weapons Support Fluid Handling Division of the Department of Defense. The selected provider is responsible for manufacturing or sourcing the assemblies and ensuring all items are packaged according to RP001 DLA Packaging Requirements and marked in compliance with MIL-STD-129. Performance for this contract will take place in Norfolk, Virginia. To be eligible, the contractor must maintain active registrations in both SAM and WAWF. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract, titled First Article Test Execution, is issued by the Department of Defense under the DLA Weapons Support Fluid Handling Division. The primary objective is to perform First Article Testing for prime contractors on DLA supply contracts to ensure manufactured components strictly adhere to technical specifications. Specifically, the contractor will verify initial production samples for NSN 4730-00-435-9381, utilizing precision measurement equipment to validate bolt tolerances and fluid passage. The scope of work culminates in the delivery of an approved first article sample and a comprehensive FAT certification report. Performance will take place at Hill AFB, zip code 84056-5734. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026, falling under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Supply of Fluid Passage Bolts (NSN 4730-00-435-9381)This subcontract involves the manufacture or procurement of 82 specialized fluid passage bolts meeting NSN 4730-00-435-9381 specifications for the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for ensuring all components are marked according to MIL-STD-129 and palletized in compliance with RP001 DLA Packaging Requirements. Logistics for the contract are managed through the First Destination Transportation program, with the place of performance located at Hill AFB. The project falls under NAICS code 332912 and requires the delivery of fully packaged and marked units to support prime contractors on DLA supply contracts.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Hydraulic Hose Protective Sleeve SupplierThis subcontract, managed by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the supply of 12 protective sleeves for hydraulic hoses. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 4720-99-349-5721 and part numbers G406/4940 and G406/4940/3. Critical compliance requirements include adherence to Class I ozone depleting chemical restrictions and MIL-STD-129 standards for shipment and storage marking. The place of performance for this contract is located in Texarkana, Texas, under NAICS code 333998.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Hydraulic Link and PinThis subcontract involves the supply of 35 hydraulic link and pin units for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The provider is responsible for manufacturing or sourcing components that strictly adhere to the technical specifications for NSN 1650004560436, ensuring full compliance with the DLA Master Solicitation and all associated technical and quality requirements. Performance for this contract takes place at Hill AFB. The logistics process requires items to be packaged specifically for Government-Arranged Transportation under the First Destination Transportation program. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 5 hours ago

DEADLINE

Metallic Hose Assembly ManufacturingThis subcontract with the DLA Weapons Support Fluid Handling Division involves the manufacture and delivery of 94 metallic hose assemblies, specifically NSN 4720015254530. The production must strictly adhere to Army Drawings and include the application of high-temperature and Chemical Agent Resistant Coatings as specified by DCSC Drawing 16236 CS-2300-0001. Quality assurance is a critical component of the agreement, requiring sampling and inspection conducted per MIL-STD-1916 or ASQ H1331, while maintaining compliance with RQ001 Higher Level Contract Quality Requirements. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 5 hours ago

DEADLINE

Nonmetallic Hose Assembly Manufacturing/SupplyThis subcontract involves the manufacture and supply of 37 nonmetallic hose assemblies, identified by NSN 4720-00-618-0655, for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for producing these critical application items in strict accordance with MIL-DTL-8790F(3) Revision F. Key requirements include the precise marking of manufacture, cure, assembly, and expiration dates to manage a non-extendable shelf life of 120 months for Type I, Code W materials. The project falls under NAICS code 339910 and is designated for performance at Robins Air Force Base. The procurement process is managed by the Department of Defense, with a response deadline set for November 19, 2026. The selected provider will act as a supplier to prime contractors tasked with fulfilling these DLA supply requirements.

Jewelry and Silverware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the supply of 59 nonmetallic hose assemblies, specifically NSN 4720016783226, for prime contractors working under the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing the assemblies to meet the technical and quality standards defined in RA001, while ensuring packaging complies with RP001 and government identification removal follows RQ011. The project falls under NAICS code 332999 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Non-Metallic Hose and Hardware ComponentsThis subcontract involves the supply of raw non-metallic hose tubing and hardware fittings to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for providing materials that strictly adhere to Drawing 19207 12581396 specifications and must ensure all components are mercury-free in accordance with NAVSEA 5100-003D. Required deliverables include raw hose lengths, hardware components, material certifications, and mill test reports. The project falls under NAICS code 326220 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 19, 2026, for this procurement effort.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Hose Assembly, Nonme (NSN 4720-01-662-1543)This subcontract involves the manufacturing of 50 nonme hose assemblies for the DLA Weapons Support Fluid Handling Division under NSN 4720-01-662-1543. Production must strictly adhere to Basic Drawing NR 19207 12581396 and TDP Rev B Gen 3, with a specific prohibition on additive manufacturing unless prior authorization is granted. All finished products must be packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. The contractor is required to maintain JCP certification and meet rigorous cybersecurity standards, including CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to fulfill the requirements of this Department of Defense project.

Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS