This Government Contract opportunity from Department Of Defense was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Critical Application Aerospace Component (NSN 3040-00-789-1596)

Closed

Federal

Submission Closed07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333613

New

DIBBS

Supply of Distributor Air Start Cam for Fairbanks Morse Diesel EngineThis subcontract involves the manufacture or procurement of one Distributor Air Start Cam, identified by NSN 3040-00-406-3254 and Part Number 16104412, for use in Fairbanks Morse Diesel Engine Model 38D8-1/8. The project is managed under the DLA Weapons Support Land Supply Chain and requires strict adherence to DLA Master List RA001 quality standards. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 specifications. The completed component is to be delivered FOB Destination to NAVIMFAC PACNORWEST in Silverdale, Washington. This requirement falls under NAICS code 333613 and is issued by the Department of Defense. Interested parties must respond by the deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Push-Pull Control Assembly (NSN 3040-01-226-0411)This subcontract involves the manufacture or distribution of one Push-Pull Control Assembly, part number B-2287-16, for the DLA Weapons Support Land Supply Chain. The assembly must be produced according to Panish Controls Incorporated specifications and adhere to the DLA Master List of Technical and Quality Requirements. Additionally, the provider must ensure full compliance with NAVSEA 5100-003D regarding the restriction of mercury and ozone-depleting chemicals. The project falls under NAICS code 333613 and is managed by the Department of Defense. The response deadline for this requirement is November 12, 2026, with the final place of performance designated as FPO 96683.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3247

Solicitation SPE7L1-27-T-3247 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of one cover housing, identified by NSN 3020-01-192-7179 and Electric Boat Corporation part number 87611-1417. This critical application item is intended for use on Trident Submarine Anchor Handling Equipment. The required delivery date is October 30, 2026, with a delivery period of 20 days after order. Shipping is FOB Origin and must be sent via the fastest traceable means to the receiving officer in Silverdale, Washington. The contractor must adhere to strict quality and material standards, including a prohibition on the intentional addition of mercury or mercury-containing compounds. Quality systems must comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization adhering to DLA requirement RP001. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L1-27-T-3246

Solicitation SPE7L1-27-T-3246 is issued by the DLA Weapons Support Land Supply Chain for the procurement of one control cam, specifically a distributor air start cam for use on Fairbanks Morse Diesel Engine Model 38D8-1/8, identified by NSN 3040-00-406-3254 and part number 16104412. The item is to be delivered to the receiving officer at NAVIMFAC PACNORWEST in Silverdale, Washington, with an original required delivery date of October 30, 2026. Delivery is set as FOB Destination, and the contractor is required to ship via the fastest traceable means, explicitly prohibiting the use of parcel post. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List (RA001), and destination inspection and acceptance are required per FAR 52.246-1. Special material restrictions apply, including the prohibition of intentionally added mercury and compliance with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and reporting. Quotations for this requirement were due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

PARTS KIT, POWER TAKE-O

Solicitation # SPE7L1-27-T-3261

Solicitation SPE7L1-27-T-3261 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of one Power Take-Off parts kit, identified by NSN 2520-01-573-6571 and Oshkosh Defense LLC part number 3414656. The requirement specifies a delivery timeframe of five days after the order, with shipping terms set as FOB Origin and delivery to Fort Riley, Kansas. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1 Appendix D for kit packaging, requiring that all loose hardware be sealed in containers to prevent corrosion and damage. Each kit must include a detailed parts list and assembly instructions if applicable. Marking must comply with MIL-STD-129, including the special marking Open This Side. Compliance requirements include CMMC Level 2 Self-Assessment, the Buy American Act, and various DFARS clauses regarding cybersecurity and the prohibition of covered defense telecommunications equipment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CONTROL ASSEMBLY, PUSH-

Solicitation # SPE7L1-27-Q-0148

Solicitation SPE7L1-27-Q-0148 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of one push-pull control assembly, identified by NSN 3040-01-226-0411. The approved source for this item is Panish Controls Incorporated, using part number B-2287-16. This is a firm-fixed-price requirement with a delivery timeline of 77 days after receipt of order. The item is to be shipped to the USS Warrior MCM 10, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except for specific functional exceptions governed by NAVSEA 5100-003D. Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. Payment processing must be conducted through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1695

Solicitation SPE7L3-27-T-1695 is a request for the procurement of 18 flexible shaft assemblies, identified by NSN 3040-00-167-4085 and part number S16366-602. The items must be manufactured according to Drawing S16366 Rev. T, specifically adhering to the parts list and assembly notes in Zone 6A. This is a Navy Identified Critical Safety Item, requiring the manufacturer's quality management system to comply with SAE AS9100 or an equivalent standard. Delivery is required within 139 days after the order is placed, with inspection and acceptance occurring at the origin. The procurement is a total small business set-aside under NAICS code 333613. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and must represent that they will not provide covered telecommunications equipment or services. Packaging is strictly regulated; the shaft assemblies must be shipped in a straight length position to prevent deformation, following MIL-STD-2073-1E and MIL-STD-129 marking standards. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. All quotes are to be submitted via DIBBS, and offerors are encouraged to provide quantity ranges to accommodate potential changes in demand.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MIL-SPEC Packaging and MarkingThis small business set-aside subcontract involves providing military-grade packaging and marking services for sensitive optical equipment supporting prime contractors on DLA Land Warren projects. The scope of work includes the supply and application of anti-static sealed pouches and protective cushioning, ensuring all units are prepared for shipment and storage in strict accordance with MIL-STD-129 labeling and packaging standards. The contractor is responsible for delivering fully packaged and marked units ready for FOB Destination shipment. This opportunity is categorized under NAICS code 333613 and is managed through the Department of Defense. Interested parties must submit their responses by the deadline of December 3, 2026.

POSTED

DEADLINE

Precision Gear Cluster FabricationThe Precision Gear Cluster Fabrication subcontract involves the manufacture of six completed Gear Cluster assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must perform a range of specialized processes, including precision milling, turning, gear cutting, hobbing, heat treatment, and grinding, to ensure all components strictly adhere to Hamilton Sundstrand P/N 731785 specifications. To qualify for this project, contractors must possess CNC Gear Hobbing machines and gear grinders. Additionally, the provider is required to maintain CMMC Level 2 compliance and satisfy all Buy American Act requirements. The work will be performed in New Cumberland, Pennsylvania, with a response deadline set for November 10, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Spur Gears (NSN 3020002452969)This subcontract involves the production and supply of eight precision-manufactured spur gears, identified by NSN 3020002452969, for prime contractors supporting DLA and Navy supply contracts. The work requires the use of specialized gear cutting and machining equipment to ensure precision standards are met. Final delivery of the units is designated for Cherry Point, North Carolina. The contractor must adhere to strict regulatory requirements, including MIL-STD-129 for marking and storage and DFARS 252.204-7012 and NIST SP 800-171 for cybersecurity compliance. This effort is managed under the DLA Weapons Support Land Supply Chain within the Department of Defense, falling under NAICS code 333613.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Spur Gear Fabrication (NSN 3020015341738)This subcontract involves the precision machining and fabrication of 17 Spur Gears under NSN 3020015341738 for the Department of Defense, specifically supporting DLA Aviation Supply Chain projects. The contractor is required to manufacture the gears according to the provided technical data package without the use of additive manufacturing. All deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards and will be performed at Tinker AFB. To qualify for this project, the provider must maintain SAE AS9100 quality management certification and CMMC Level 2 compliance. Additionally, the contractor must possess the specialized capability for Critical Safety Item production. The solicitation was posted on November 2, 2026, with a response deadline of November 9, 2026, falling under NAICS code 333613.

DLA WEAPONS SUPPORT SMSG AVIATION SUP CH CORPORATE LTC

POSTED

DEADLINE

Supply of Helical Gears (NSN 3020012703371)This subcontract involves the supply of four packaged helical gears under NSN 3020012703371 for prime contractors working on Defense Logistics Agency Land and Maritime projects. The selected provider is responsible for manufacturing or sourcing the gears using precision cutting and grinding equipment, ensuring all items are preserved and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. Delivery will be handled via Government-Arranged Transportation. The contract mandates strict adherence to several regulatory requirements, including the Buy American Act, the Berry Amendment, and cybersecurity standards NIST SP 800-171 and DFARS 252.204-7012. Classified under NAICS code 333613, this requirement is managed through the Department of Defense and requires a response by November 5, 2026.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 2 days

AI Contract Overview

The contract requires the supply and delivery of two units of a highly specialized aerospace component identified by NSN 3040-00-789-1596 and part number 357556-5 for use in a critical application, where absolute reliability and full traceability are mandatory. Each unit must meet stringent quality assurance protocols and be packaged in full compliance with military specifications, including defense information security requirements to safeguard sensitive technical data throughout the supply chain. The component is intended for performance under demanding operational conditions, and all manufacturing, testing, and documentation processes must adhere to defense industry standards without exception. The solicitation is issued as a subcontract under the NAICS code 333613, managed by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, with performance expected to take place in New Cumberland, Pennsylvania, ZIP 17070-5002. Responses are due by July 22, 2026, and the opportunity was posted on July 14, 2026, through the DIBBS platform. While no set-aside designation or point of contact is specified, bidders must be prepared to demonstrate proven capability in producing defense-critical components with end-to-end documentation, secure handling procedures, and the ability to meet exacting delivery timelines without deviation.

General Info

Supply two specialized aerospace components per military specs with full traceability and secure handling for DoD use in Pennsylvania by July 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

333613 - Mechanical Power Transmission Equipment Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-285Z.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAM, CONTROL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supply and delivery of two units of a critical aerospace component (NSN 3040-00-789-1596, P/N 357556-5) designated for critical application, requiring full traceability, quality assurance, and compliance with military packaging and defense information security standards.