Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Critical Raw Materials and Components

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits the supply of high-temperature resistant polymers, reinforced liners, and metal fittings specifically for use in military hose and duct production, requiring all materials to meet stringent traceability and quality standards set by the Defense Logistics Agency. Suppliers must demonstrate full compliance with DLA quality protocols, ensuring that each component can be tracked through its entire lifecycle and meets the demanding performance criteria necessary for defense applications. The materials are critical to the integrity and operational reliability of military fluid handling systems under extreme conditions. The opportunity is structured as a subcontract under NAICS code 325211, issued by the Department of Defense’s Fluid Handling Division with a place of performance in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026. All potential vendors must adhere to the detailed procurement requirements outlined in the solicitation, accessible via the provided DIBBS link, and be prepared to provide full documentation verifying material origin, testing procedures, and compliance certifications as part of the submission.

General Info

Supply high-temperature polymers and fittings for military hoses, meeting DLA traceability and quality standards by July 27, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

325211 - Plastics Material and Resin ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high-temperature resistant polymers, reinforced liners, or metal fittings for military hose/duct production; supplier must be traceable and compliant with DLA quality standards.

Similar Contracts

Same NAICS industry code

Supply of Antifreeze (Engine Coolant) for Military Vehicle MaintenanceThe contract entails the procurement and delivery of one 208L drum of antifreeze, identified by NSN 6850014716521, which must meet military specifications for use in vehicle maintenance operations at Fort Irwin, California. The substance is categorized as engine coolant and is essential for ensuring proper thermal regulation of military vehicles under extreme operational conditions. The contract is structured as a subcontract under the NAICS code 325211, which corresponds to the manufacturing of other chemical products, indicating the supplier is likely a specialized chemical producer meeting defense-grade standards. The award is managed by the Defense Logistics Agency on behalf of the Department of Defense, with the procurement linked to the contract award SPE4AX16D9008 and delivery identifier SPE4A626FCTYL. The posting date of July 17, 2026, suggests this is a future-directed action, likely part of a scheduled maintenance or inventory replenishment cycle. No specific point of contact or detailed location information is provided, but performance is mandated at Fort Irwin, CA, implying logistical coordination will be required to support the facility’s operational readiness.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Construction Materials Supply – HDPE Pipe & FittingsThe contract involves the supply of high-density polyethylene (HDPE) pipe, fusion fittings, and meter components specifically for service line replacement projects, with all materials required to comply with PPI or ASTM F714 standards and BABAA requirements to ensure quality and regulatory adherence. The materials must be suitable for potable water applications and delivered in accordance with strict industry specifications to support infrastructure upgrades. All submissions are subject to verification for compliance before acceptance under the terms of this subcontract. The opportunity is posted by the City of Hawkinsville in Georgia with a response deadline of August 20, 2026, and is classified under NAICS code 325211 which pertains to plastic pipe and pipe fitting manufacturing. The solicitation is open for subcontractors to bid on the provision of materials, and while no specific set-aside designation is listed, bidders must be prepared to meet all technical, delivery, and certification criteria outlined in the regulatory and performance requirements. Further details and submission instructions are accessible via the provided state government portal link.

City of Hawkinsville

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Orange Translucent Polycarbonate Material SupplyThe contract entails the supply of translucent orange polycarbonate resin or sheet stock specifically engineered for use in surgical eye shields, with stringent requirements for optical clarity, high impact resistance, and consistent color properties to ensure visual protection and functional reliability in medical environments. The material must meet exacting standards to support sterile, precision-based surgical procedures where barrier integrity and visibility are critical. Performance specifications demand materials that maintain structural resilience under stress while delivering uniform light transmission characteristics through a distinct translucent orange hue. The solicitation is issued under the NAICS code 325211 for plastic material and resin manufacturing, and the procurement is classified as a subcontract through the Department of Defense’s Medical Supply Chain division. The place of performance is designated as Niantic, Connecticut, with a zip code of 06357-2512, indicating where delivery and compliance verification will occur. The opportunity was posted on July 16, 2026, and responses are due by July 22, 2026, offering a six-day window for qualified suppliers to submit proposals. The procurement is managed under the agency designation MEDICAL SUPPLY CHAIN MD SURG FSF and is accessible via the DIBBS platform for vendor participation.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Military-Grade Silicone Compound (NSN 6850008807616)The contract entails the procurement and delivery of nine units of a military-grade silicone compound identified by NSN 6850008807616, intended for use aboard a naval vessel within the Armed Forces Europe region. The supplier must ensure full compliance with DFARS regulations, including the submission of invoices that meet defense contracting requirements, and must provide traceable shipping documentation to maintain accountability throughout the logistics chain. Each unit must be properly marked according to military standards to ensure correct identification, handling, and integration into naval systems. The work is executed under a subcontract tied to the Defense Logistics Agency under the Department of Defense, with the NAICS code 325211 indicating classification in the chemical manufacturing sector. Although the exact delivery location and point of contact are unspecified, performance is directed toward a military operational environment in Europe, and all activities must adhere to strict defense procurement protocols.

Defense Logistics Agency

POSTED

DEADLINE

Sustainable & Bio-Based Material SupplyThe contract entails the supply of USDA BioPreferred® certified bioplastics and recycled polymers specifically for use in the manufacturing of environmentally compliant cases, ensuring alignment with federal sustainability standards. These materials are intended to support the production of packaging and containment solutions that reduce reliance on conventional petroleum-based plastics and promote the use of renewable, certified bio-based and recycled content. The work falls under NAICS code 325211, which pertains to plastic product manufacturing, and is executed as a subcontract under the broader procurement framework of the Defense Logistics Agency, a component of the Department of Defense. Delivery of these materials must meet strict compliance requirements tied to USDA certification and performance benchmarks for recycled content, with the place of performance aligned with defense supply chain needs. Although specific delivery locations and point of contact details are not provided, the contract is active under the solicitation tracking reference SPE8EN26D0001 and delivery identifier SPE8EN26F3219, indicating its integration into a larger logistics and procurement initiative. The agreement underscores the Department of Defense’s commitment to incorporating sustainable materials into its operational infrastructure, reinforcing environmental stewardship across defense manufacturing channels.

Defense Logistics Agency

POSTED

DEADLINE

Rapid Pregnancy Test Kit SupplyThe contract seeks the supply of rapid qualitative HCG test kits designed for early pregnancy detection in both serum and urine samples, with each package containing 50 individual tests and a sensitivity threshold of 25 MIU/mL to ensure reliable early results. These test kits are intended for use within military medical supply channels and must meet specified performance standards for accuracy and consistency in clinical environments. The solicitation is classified as a subcontract under NAICS code 325211, which pertains to pharmaceutical and medicine manufacturing, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF. The place of performance is designated as Fort Stewart, Georgia, with a zip code of 31314-5185, indicating the primary logistics and distribution hub for delivery. The opportunity was posted on July 16, 2026, and responses are due by July 22, 2026, providing a narrow six-day window for potential suppliers to submit proposals. While no set-aside provisions or organizational type restrictions are specified, the requisition is part of a broader defense medical logistics initiative, requiring compliance with federal procurement standards and likely inclusion of quality assurance, packaging, labeling, and shipment requirements tied to military specifications. Interested parties must access the official solicitation through the DIBBS portal using the provided link to obtain full technical and administrative instructions governing submission requirements, certification, and evaluation criteria.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

FILAMENT, ADDITIVE MThe contract specifies the procurement of 40 units of PETG32WHITE filament, a 3D printing additive material, under NSN 9330-01-712-8632 and purchase request 7017513225, with a unit price of $40.00 resulting in a total price of $1,600. Delivery is required within 20 days of contract award, with shipment FOB origin, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and the material must be packaged in strict accordance with DLA packaging requirements, specifically IP025, and labeled per MIL-STD-129. Non-hazardous material must comply with ASTM D3951 unless overridden by a higher-priority DLA Master List technical or quality requirement. Hazardous material handling, if applicable, must follow FED-STD-313. All packaging and palletization must adhere to RP001, and freight must be shipped by traceable means only—parcel post is prohibited. The delivery address for freight is the Distribution Management Office at Camp Lejeune, NC, with a designated TCN and RDD for tracking. The original required delivery date is April 8, 2025, and the contract is issued under solicitation SPE8E5-26-T-3622, governed by DLA standards and technical specifications referenced through the DLA Master List. The NAICS code is 325211, and the contracting officer is Brandon Wicker of the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

Additive Manufacturing Filament SupplyThe contract is for the supply of a single unit of military-specification additive manufacturing filament identified by NSN 9330-01-708-9433, requiring strict adherence to Department of Defense Defense Logistics Agency technical and quality standards. The filament must be delivered FOB origin to Twentynine Palms, California, with a zip code of 92278-8270, ensuring the product meets operational requirements for defense applications. The solicitation was posted on July 15, 2026, and responses are due by July 27, 2026, with the contract classified as a subcontract under NAICS code 325211 for plastic material manufacturing. The contracting agency is the Defense Logistics Agency under the Department of Defense, emphasizing the critical nature of the material for military use. While no set-aside designation or specific point of contact is provided, the procurement is hosted on the DIBBS platform for official bidding and compliance tracking. All terms, including specifications, delivery conditions, and regulatory compliance, are governed by DLA’s formal requirements, and failure to meet these standards will result in rejection. The delivery location at Twentynine Palms indicates end-use by a military training or operational unit requiring certified 3D printing materials in a field-ready environment.

Defense Logistics Agency

POSTED

DEADLINE

Silicone Compound Supply (NSN 6850016451304 / P/N A181-R)One unit of MIL-SPEC silicone compound, part number A181-R with national stock number 6850016451304, is to be supplied and delivered to Fort Bragg, North Carolina, under a subcontract issued by the Defense Logistics Agency on behalf of the Department of Defense. The product must fully comply with all military specification requirements including traceability, labeling, and shipping standards mandated by DoD regulations. The contract falls under NAICS code 325211, indicating classification within the chemical manufacturing sector, and the delivery must adhere to the formal documentation and procedural protocols expected for defense-related materiel. The transaction is managed through the DLA’s procurement system, with the awarded contract reference linking to official records for verification and audit purposes.

Defense Logistics Agency

POSTED

DEADLINE

Domestic Sourcing and Supply Chain Compliance for Medical PlasticsThe contract requires the supply of U.S.-sourced, medical-grade plastic resins specifically for the manufacturing of Berman airways, with strict adherence to defense material restrictions and full documentation of material origin. All resins must meet medical-grade standards and be derived exclusively from domestic sources to ensure compliance with federal procurement mandates for defense-related medical devices. The subcontractor must provide comprehensive traceability records, including raw material sourcing, production batches, and certification of conformity to applicable defense and medical regulations. Performance is centered on the APO location with zip code 09094-3219, and the contract falls under NAICS code 325211 for plastic resin manufacturing. The solicitation was posted on July 15, 2026, with responses due by July 21, 2026, under the Department of Defense’s Medical Supply Chain MD Surg FSF. The emphasis is on securing a resilient, domestically controlled supply chain to support critical military medical equipment, ensuring no foreign-sourced materials are introduced at any stage of production or logistics.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Coolant Fluid Supply and DeliveryThe contract entails the procurement and delivery of four quarts of military-grade coolant fluid, identified by NSN 9150013062475, to Fort Hood, Texas. The item must be shipped using the fastest available traceable method to ensure timely and verifiable arrival. This is a subcontract under the broader procurement framework managed by the Defense Logistics Agency within the Department of Defense. The North American Industry Classification System code 325211 indicates the activity is tied to the manufacturing of industrial chemical preparations. The contract was posted on July 15, 2026, and is linked to the award record SPE4AX16D9008 with delivery trace ID SPE4A626FCRLL and contract number 261109. While specific performance location and point of contact details are not provided, the destination is clearly identified as Fort Hood, TX, and the requirements emphasize mission-critical logistics compliance.

Defense Logistics Agency

POSTED

DEADLINE

Domestic Raw Material Supply for Plastic ComponentsThe contract calls for the supply of domestic-origin plastic resins or films intended for use in manufacturing final components, with strict adherence to the Buy American Act and Berry Amendment requirements, ensuring all materials are wholly produced or manufactured in the United States. The work is classified under NAICS code 325211 and is structured as a subcontract under the Maritime Supply Chain division of the Department of Defense, with performance mandated to occur at Cherry Point, North Carolina, under the zip code 28533-5040. All submissions must comply with federal sourcing regulations that prioritize U.S.-made inputs, and vendors are expected to provide documentation proving the origin and compliance of their materials. Proposals must be submitted by the response deadline of July 27, 2026, and the solicitation was posted on July 15, 2026. There is no specific set-aside designation indicated for small businesses or other categories, meaning the opportunity is open to all qualified contractors who can meet the domestic content mandates. The contracting office is part of the Department of Defense’s supply chain infrastructure, and while no point of contact is listed, details can be referenced through the official DIBBS portal link provided. Compliance with material origin rules is non-negotiable, and failure to demonstrate full domestic sourcing will result in disqualification.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

MOTOR, ALTERNATING CURRThe contract solicits nine alternating current motors with NSN 6105-01-211-6510 under solicitation number SPE7M4-26-T-215P, with a response deadline of July 22, 2026, and a delivery requirement of 77 days after award. This is a restricted source item requiring formal engineering source approval from the government design control activity. The product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation issue date or amendment date for large acquisitions. The offeror must submit complete manufacturing documentation per MIL-T-31000, including all drawings, detailed process and operation sheets identifying critical steps and inspection criteria, sourcing information for forgings and castings, and if available, copies of purchase orders. A shock extension report meeting MIL-S-901 and DI-ENVR-80706 standards is mandatory. If original OEM drawings are unavailable, the offeror must provide a detailed engineering analysis explaining how their drawings were developed, including full details of any reverse engineering methodology used, such as sample sizes, measurement techniques, data collected, and justifications for dimensional deviations. All submitted data must be routed to the engineering support activity for review and approval.

Motor and Generator Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLATE, ORIFICE, FLUIDThe contract is for the procurement of one fluid orifice plate, identified by NSN 4730-01-686-7144, under solicitation SPE7M3-26-T-7152, with a proposed delivery date 20 days after award and a deadline for response on July 22, 2026. The item is to be delivered to the Naval Sea Systems Command warehouse in Mechanicsburg, Pennsylvania, under FOB Origin terms. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which supersedes general commercial packaging standards like ASTM D3951, and requires full compliance with MIL-STD-129 for marking, labeling, and barcoding of shipments, including proper identification of hazardous materials under OSHA’s Hazard Communication Standard. Export control is a critical component, as the technical data associated with this item is subject to ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approval processes, may access the controlled information, in accordance with DFARS 252.225-7048. The contract includes a suite of FAR and DFARS clauses addressing small business representation, employment eligibility, combating trafficking, sustainable products, cybersecurity safeguards, and transportation regulations, many of which are applied with deviations under DEVIATION 2026-00038 or similar, and requires electronic invoicing exclusively through WAWF. Pricing data is not provided, and the contract type is unspecified, though the solicitation is categorized as a simplified acquisition. The contractor must also comply with special labeling requirements for any hazardous materials, submit pre-award label and MSDS documentation if applicable, and ensure ongoing updates to hazardous material disclosures throughout performance. All proposals must be submitted electronically via DIBBS by the stated deadline, and offerors must represent their size status and socioeconomic certifications, including any joint venture arrangements, while also disclosing if they provide covered defense telecommunications equipment or services under 252.204-7016 and 7017. Inspection and acceptance will occur at the destination by the government, with no provision for contractor inspection. The contract includes no evaluation factors, weights, or basis of award information, and no attachments are identified.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

DISK, VALVEThe contract pertains to the procurement of three DISK, VALVE units identified by NSN 4820-01-304-4960 under solicitation number SPE7M4-26-T-234L. This federal procurement is managed by the Defense Logistics Agency under the Department of Defense and was posted on July 6, 2026, with a response deadline of July 17, 2026. The solicitation is open to all eligible contractors without any specific set-aside classification. The place of performance and office address information are not specified, but the procurement is conducted under U.S. federal jurisdiction. Interested parties must submit responses through the designated DIBBS platform via the provided UI link before the deadline to be considered for award.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

MANIFOLD, HYDRAULICThe contract pertains to the procurement of a hydraulic manifold system accessory identified by NSN 4730-01-707-1733 and part number 201330780-10, with a quantity of 43 units required for delivery within 136 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards per DLA requirements and includes tailored higher-level quality controls for both manufacturers and non-manufacturers. Inspection and acceptance must occur at the manufacturer’s origin, and any non-accepted supplies must have government identification removed prior to return. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization. The solicitation number is SPE7M3-26-T-7278, issued by the Department of Defense’s Fluid Handling Division, with responses due by July 22, 2026, and performance required at New Cumberland, Pennsylvania.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

TUBE, METALLICThe contract specifies the procurement of seamless metallic tubes made from aluminum alloy 6061 in temper T6, with dimensions of 1-1/2 inches square by 1/4 inch wall thickness and a standard length of 21 feet per unit, conforming to the ASTM B221-21 standard for extruded aluminum products. The tubes must meet strict quality and packaging requirements outlined in DLA’s Master List of Technical and Quality Requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The use of ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specification. Each unit is designated as a linear foot equivalent (LG), with a total quantity of 91.905 LG, rounded to 92 units, and no variance in quantity is permitted. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and the delivery deadline is set for 221 days from contract award, with a required ship date of February 24, 2027. Packaging must also adhere to ASTM B660 and DLA’s packaging requirements, with palletization and container specifications detailed per DLA guidelines. The item is identified by NSN 4710-01-182-2428, and the delivery address is DLA Distribution Red River in Texarkana, Texas. Full and open competition applies, with contract administration handled by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-234E, and primary point of contact is Rory O’Reilly.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 16 hours ago

DEADLINE

STRAINER, SUCTIONThe contract is for the procurement of 51 units of a suction strainer identified by NSN 4730-12-374-6394 under purchase request 1000235512, with a delivery requirement within 84 days after award. The solicitation number is SPE7M4-26-U-0379, issued on July 17, 2026, with responses due by July 22, 2026, and it is designated as a Total Small Business Set-Aside under FAR 19.5, targeting small business concerns. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item falls under NAICS code 333998 and is managed by the Fluid Handling Division of the Department of Defense. All supply shipments must comply with DLA packaging standards and include provisions for removal of government identification from non-accepted items. The point of contact for inquiries is Colin Brown, reachable via email and phone, and the solicitation is accessible through the DIBBS portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

STRAINER ELEMENT, SEDIMThe contract mandates the supply of a sediment strainer element made exclusively from Monel material, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where compliance is governed by the revision in effect on the solicitation or award date depending on acquisition size. The item is designated as a critical application and must not contain any Class I ozone-depleting chemicals, nor intentionally incorporate mercury or mercury-containing compounds except under specific, narrowly defined exceptions for functional uses in batteries, lights, instruments, weapon systems, or NAVSEA-specified reagents. Portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Approved suppliers include Haywardindl. Products Inc. and Eaton Filtration LLC, both with part number ST052160P250MM, and the contract is issued under solicitation SPE7M3-26-T-7277 with a women-owned small business set-aside. Six units are required with zero variance allowed in quantity, to be delivered FOB origin within 157 days of the contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special marking codes indicating “Arrow Up,” “Open for Inspection or Use Only,” “Open This Side,” and “Team Lift Required.” The DLA requires reduced plastic packaging without compromising protection, and palletization must follow DLA packaging guidelines. The shipment must be addressed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required delivery date set for December 22, 2026. The NSN is 4730-01-289-5533, and the unit of issue is each (EA). A Certificate of Conformance is authorized unless overridden by a Quality Assurance Letter of Instruction. The prime point of contact is William Cain, with additional transportation and shipping requirements governed by DLA procedural notes C19 and C20.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

Quality Assurance and Compliance Documentation ServicesThe contract requires the preparation and submission of comprehensive technical documentation to ensure full compliance with military standards, specifically focusing on traceability records, inspection reports, and certification of adherence to required specifications. This work is essential to verify the integrity and conformity of components and systems within the defense supply chain, supporting rigorous quality assurance protocols. All deliverables must be meticulously compiled, accurately documented, and submitted in a timely manner to meet the regulatory expectations of the Department of Defense. This is a subcontract under the NAICS code 541330 for Quality Assurance and Compliance Documentation Services, issued by the FLUID HANDLING DIVISION of the Department of Defense. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026. Although no specific location is designated for performance, the work is directly tied to defense-related operations and must align with stringent federal defense requirements. Interested parties must respond by the stated deadline to be considered for award, and the contract will be managed through the DLA DIBBS portal using the reference number SPE7M326Q0170.

Engineering Services

POSTED

DEADLINE

Logistics and Transportation to DLA Distribution CenterThe contract entails the secure and compliant transportation of packaged military items to the DLA Distribution Center in New Cumberland, Pennsylvania, adhering strictly to Defense Priority Allocation System (DPAS) requirements and DLA procurement directives C19 and C20. All shipments must meet rigorous defense logistics standards, ensuring timely, tamper-proof delivery while maintaining full regulatory compliance throughout the supply chain. The contractor is responsible for end-to-end logistics execution with attention to security protocols, documentation accuracy, and adherence to military-specific handling procedures. This is a subcontract under the NAICS code 484220 for truck transportation of freight, solicited by the Fluid Handling Division of the Department of Defense. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026. Performance will occur at the specified DLA Distribution Center location, and all activities must align with federal defense procurement standards. The contract requires proven experience in defense logistics, ability to navigate DPAS prioritization, and capacity to meet stringent delivery timelines without compromise to safety or compliance.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Reconditioning and Reutilization Services for Government SurplusThe contract encompasses the inspection, reconditioning, rebuild, and certification of surplus fluid handling components to meet original military specifications, ensuring they are fit for reuse or resale. All work must adhere strictly to the technical and quality standards established for government-issued equipment, with a focus on restoring functionality, reliability, and safety without compromise. The services required include thorough assessment of component integrity, replacement of worn or degraded parts, systematic reassembly, and formal certification verifying compliance with all applicable military requirements. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Fluid Handling Division within the Department of Defense. It was posted on July 16, 2026, with a response deadline of July 27, 2026. While no specific location is designated for performance, all work must be executed in a manner that supports the readiness and logistical needs of the military supply chain. The solicitation is accessible through the DIBBS portal, and potential bidders are expected to demonstrate proven capability in handling military-grade fluid systems with a documented history of successful reconditioning and certification.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Specialized Hose Clamp Supply (NSN 4730-01-661-4086)The contract specifies the supply of 49 military-specification hose clamps identified by NSN 4730-01-661-4086, requiring full traceability from manufacturing through delivery, with packaging and documentation fully aligned with Defense Logistics Agency standards. All units must meet rigorous defense-grade specifications to ensure operational reliability and compliance with DoD requirements. The solicitation is issued as a subcontract under NAICS code 332994 by the Fluid Handling Division of the Department of Defense, with responses due by July 27, 2026, and the opportunity posted on July 16, 2026. The place of performance and point of contact details are not specified, but the work is expected to support military fluid handling systems, with all deliverables subject to DLA inspection and verification protocols.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract involves providing quality inspection and acceptance support for critical, major, and minor product attributes using zero-based sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards to ensure compliance with AQL requirements. Inspections must be conducted both during production and at final stages to guarantee conformance and operational reliability. The work is designated as a subcontract under NAICS code 541320 and is managed by the Fluid Handling Division of the Department of Defense, with performance required at a facility in San Diego, zip code 92136-3581. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with all submissions to be made through the DIBBS platform using the provided RFQ link.

Landscape Architectural Services

POSTED

DEADLINE