Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Deep Cycle Marine Storage Batteries

Active

Federal

Response Deadline10/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement of deep cycle marine storage batteries to support prime contractors under Defense Logistics Agency supply contracts. The scope of work requires the sourcing and provision of four Concorde Battery Corporation part number GPL-4CT 6-volt batteries, which must be fully sealed, non-spillable, submersible, and maintenance-free. All units are required to have a minimum shelf life of 18 months and must be delivered to NAS North Island Supply in San Diego, California. Compliance is mandatory regarding HAZMAT shipping regulations and strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is categorized under NAICS code 325181 and is managed through the Department of Defense. Interested parties must note the response deadline of October 27, 2026.

General Info

Agency

Department Of Defense → Defense Logistics Agency

NAICS

325181 - Alkalies and Chlorine Manufacturing

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-Q-0100.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BATTERY, STORAGE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 16

subcontract

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies deep cycle marine storage batteries for prime contractors on Defense Logistics Agency (DLA) supply contracts. Sources and provides four Concorde Battery Corporation part number GPL-4CT 6-volt, fully sealed, non-spillable, submersible, maintenance-free batteries. Ensures 18-month shelf life and adheres to HAZMAT shipping regulations, MIL-STD-2073-1E, and MIL-STD-129. Delivers batteries to NAS North Island Supply, San Diego, CA.

Similar Contracts

Same NAICS industry code

Deep Cycle Marine Battery SupplierThis subcontract opportunity with the Defense Logistics Agency requires the supply of one Concorde Battery Corporation part number GPL-4CT Type I deep cycle marine battery. The battery must be fully sealed, non-spillable, submersible, and maintenance-free, featuring a non-extendable shelf life of at least 18 months. To ensure quality and compliance, the supplier must provide a Certificate of Conformance verifying all technical specifications. Prospective bidders must complete a CMMC Level 2 self-assessment to be eligible for the award. The solicitation was posted on October 16, 2026, with a response deadline of October 27, 2026. This requirement falls under NAICS code 325181 and is intended for prime contractors supporting DLA supply contracts.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Lead-Acid Wet Storage Battery SupplierThis subcontract involves the supply of three lead-acid wet storage batteries, specifically Interstate Battery System part number MTP-78DT, for prime contractors delivering to the Defense Logistics Agency. The batteries must be Type I Code F and maintain a minimum shelf life of six months upon delivery to Minden, Louisiana. The supplier must ensure full compliance with the Buy American Act and the Berry Amendment. Additionally, all items must adhere to 29 CFR 1910.1200 standards for hazardous material labeling. The procurement falls under NAICS code 325181 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Seal Replacement Kits (NSN 5330-01-344-4300)This subcontract, issued by the Department of Defense for the DLA Weapons Support Strategic Acquisition Program Directorate, requires the supply of 391 seal replacement kits. The kits must match Norman Filter Company part number KIT-45/535-N and are designated under NSN 5330-01-344-4300. All components must be asbestos-free in accordance with FED-STD-313 and delivered FOB Origin. The contract mandates strict adherence to military packaging and marking standards, specifically requiring MIL-DTL-117 Type II Class C Style 1 opaque bags, with palletization and marking following MIL-STD-129 and MIL-STD-2073-1E. This opportunity is a total small business set-aside under NAICS code 325181, with a response deadline of October 29, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Sealed Lead Acid Battery Cell SupplierThis subcontract involves the supply of S/L Type I sealed lead acid battery cells, specifically part number 96-076-040, to support Defense Logistics Agency supply contracts for US Navy vessels. The supplier is responsible for manufacturing or sourcing six battery cells that maintain a minimum shelf life of 12 months. All deliverables must be shipped to designated FPO addresses. Strict compliance with hazardous materials protocols is required, including packaging and marking according to IP025, MIL-STD-2073-1E, and MIL-STD-129 standards. The contractor must hold valid HAZMAT certification to facilitate shipping. This requirement falls under NAICS code 325181 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Sealed Lead Acid Battery Supplier (NSN 6130014185230)This subcontract involves the supply of two commercial off-the-shelf sealed lead acid battery power supply units, identified by NSN 6130014185230, for prime contractors working on Defense Logistics Agency procurement projects. The units must be delivered FOB Origin and are required to have a minimum non-extendable shelf life of 12 months. The supplier must ensure strict adherence to several regulatory and technical standards, including the Buy American Act and specific mercury restrictions. Additionally, the contract mandates compliance with MIL-STD-129 Special Marking Code 32 and MIL-STD-2073-1E packaging requirements. Performance for this contract is centered in Hamlet, North Carolina.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture and Supply of Friction Linings (NSN 2530-01-395-5242)This subcontract involves the manufacture and supply of 214 units of asbestos-free friction linings, identified by NSN 2530-01-395-5242, for the DLA Weapons Support Fluid Handling Division. The contractor is required to fabricate these units in strict accordance with RA001 technical requirements and ensure all products are packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards. The project must comply with the Buy American Act and the Berry Amendment to ensure domestic sourcing. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 325181. The final deliverable consists of completed, marked, and packaged friction linings delivered to the prime contractor.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Liquid Aluminum Chlorohydrate (ACH) SupplierThis subcontract agreement is for the supply and delivery of Liquid Aluminum Chlorohydrate (ACH) to support prime contractors working on water treatment projects for the City of Delaware. The selected supplier is responsible for providing bulk shipments in quantities ranging from 3,000 to 4,000 gallons, utilizing Type I XLPE or Type 2 HDLPE tank trucks. All deliveries must be accompanied by certified scale weight tickets to ensure accurate measurement. To ensure safety and quality, the Liquid ACH must strictly adhere to AWWA Standard B408 and ANSI/NSF Standard 60. This opportunity falls under NAICS code 325181, with a response deadline set for October 19, 2026.

City of Delaware

POSTED

DEADLINE

UPS Battery Equipment SupplierThis subcontract agreement establishes a partnership with a UPS Battery Equipment Supplier to provide industrial-grade batteries for prime contractors working on NCDIT Eastern Data Center projects for the State of North Carolina. The supplier is required to deliver battery cells and mounting hardware in original sealed containers from approved manufacturers, specifically EnerSys, C&D Technologies, or GNB Industrial Power. All equipment must comply with IEEE 450 standards and include necessary support racks. A critical component of the agreement is the provision of a five-year Special Manufacturer Extended Warranty for all Ni-Cd batteries supplied. The contract is managed by the State of North Carolina Construction Office under NAICS code 325181, with a response deadline set for October 21, 2026.

State of NC - Construction Office

POSTED

DEADLINE

Industrial Battery Bank SupplierThis subcontract for Newfoundland Labrador Hydro involves the supply of industrial battery banks and racking systems for prime contractors operating on projects at Holyrood. The selected supplier is responsible for the design and manufacture of battery cells and banks, the provision of cell sizing worksheets based on IEEE Standards, and the delivery of discharge curves and operations and maintenance manuals. The supplier must maintain a Quality Assurance Program Certificate and ensure all products comply with IEEE, CSA, or CE standards. Key deliverables include the performance of Factory Acceptance Testing and the delivery of fully tested battery banks and racks. The response deadline for this opportunity is October 19, 2026.

Newfoundland Labrador Hydro

POSTED

DEADLINE

Bulk Liquid Argon Supply and DeliveryThis subcontract, managed by the Defense Logistics Agency under the Department of Defense, covers the annual supply and delivery of bulk liquid argon to Hill Air Force Base. The required material, identified by NSN 7530-01-416-3281, must strictly adhere to MIL-PRF-27401H specifications and comply with all OSHA hazard communication standards. The contract falls under NAICS code 325181 and was posted on August 17, 2026. It establishes the procurement framework for the consistent delivery of high-purity argon to support operational requirements at the specified military installation.

Defense Logistics Agency

POSTED

DEADLINE

Bulk Liquid Nitrogen Supply and DeliveryThis subcontract with the Defense Logistics Agency under the Department of Defense involves the supply and delivery of Grade L bulk liquid nitrogen to Hill Air Force Base. The materials must be transported using DOT-certified cryogenic tank trucks and adhere strictly to MIL-PRF-25508J specifications and OSHA GHS labeling requirements. The contract is categorized under NAICS code 325181 and was posted on August 17, 2026. It ensures the consistent procurement of liquid nitrogen identified by NSN 7530-01-416-3275 to support operational needs at the specified military installation.

Defense Logistics Agency

POSTED

DEADLINE

Supplier: Hazardous Chemical Supply – Nitric Acid (NSN 6810002229655)A single bottle of Nitric Acid, identified by NSN 6810002229655, is to be supplied and delivered to a U.S. Army facility in Powidz, Poland, using the fastest traceable shipping method available, with a mandatory delivery deadline of August 18, 2026. The contract is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under NAICS code 325181 for chemical manufacturing. The item is classified as a hazardous chemical, requiring adherence to strict transportation and handling protocols to ensure safety and regulatory compliance. The delivery must be fully trackable from origin to destination to maintain accountability and security throughout the supply chain. The solicitation was posted on August 7, 2026, indicating a narrow window for fulfillment under urgent operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Aerospace Surface Finishing and MarkingThis subcontract for Aerospace Surface Finishing and Marking supports DLA Troop Support aircraft trainer pod projects. The selected contractor will be responsible for applying protective finishes and identification markings to Hanger Assemblies, ensuring all work is performed in strict accordance with MIL-STD-129. Managed by the Defense Logistics Agency under the Department of Defense, this requirement falls under NAICS code 332813. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 6 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

Precision Aerospace CNC MachiningThe Precision Aerospace CNC Machining subcontract involves the final machining and assembly of hanger assemblies for aircraft trainer pod projects under the Defense Logistics Agency. The selected provider will be responsible for machining components from blanks to final dimensions according to TDP Rev A Gen 1 specifications and must conduct 100% dimensional inspection for First Article Testing to ensure all deliverables meet strict quality standards. Compliance is a critical requirement for this engagement, as the contractor must maintain CMMC Level 2 certification and adhere to ITAR and EAR regulations. This project falls under NAICS code 336413 and requires the delivery of completed Hanger Assemblies to support prime contractors on Department of Defense initiatives.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Aerospace Casting and ForgingThis subcontract involves the casting and forging of aerospace-grade materials for hanger assembly components used in DLA Troop Support aircraft trainer pod projects. The selected provider must deliver rough-cast or forged blanks that strictly adhere to TDP Rev A Gen 1 specifications and maintain mercury-free compliance in accordance with NAVSEA 5100-003D. The project is managed under the Defense Logistics Agency and requires strict adherence to regulatory standards, including ITAR/EAR compliance and the US/Canada Joint Certification Program. Interested parties must respond by October 22, 2026, for this specialized manufacturing effort categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing specialized military packaging, marking, and shipment preparation for prime contractors working on Defense Logistics Agency supply contracts. The scope of work focuses on the processing of vests, ensuring they are packaged, marked, and palletized for destination delivery using industrial marking equipment and military-grade wraps and containers. All operations must strictly adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking requirements. This effort falls under NAICS code 488410 and is managed through the Department of Defense.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Specialized Nylon Cord SupplyThis subcontract for Specialized Nylon Cord Supply involves providing high-tensile strength nylon cords to prime contractors supporting the Defense Logistics Agency. The required materials must meet or exceed a minimum tensile strength of 90 pounds, with all bulk cordage delivered alongside official test certifications. To ensure quality and compliance, the supplier is responsible for performing testing and certification of tensile strength in accordance with ASTM D4268 standards. This opportunity falls under NAICS code 313210 and is managed through the Department of Defense.

Broadwoven Fabric Mills

POSTED

about 6 hours ago

DEADLINE

Life Preserver Vest Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 561,330 abandon ship life preserver vests for prime contractors under Defense Logistics Agency supply contracts. The contractor is responsible for fabricating the vests according to CID A-A-59767A, which includes the integration of outer shells and buoyancy materials. All components must be certified as asbestos-free in compliance with FFD-STD-313, and the production process requires specialized industrial sewing equipment capable of handling marine-grade textiles. The project falls under NAICS code 314999 and mandates strict adherence to DFARS Part 225 regulations. The specific item being produced is identified by NSN 4220-01-487-2932. Interested parties must note the response deadline of October 22, 2026, for this Department of Defense requirement.

All Other Miscellaneous Textile Product Mills

POSTED

about 6 hours ago

DEADLINE

Supply of Annealed, Cold-Drawn Flat Steel Bar (COMP 8630)This subcontract through the Defense Logistics Agency requires the supply of annealed, cold-drawn flat steel bar with a thickness of 0.250 inches. The material must strictly adhere to COMP 8630, MIL-S-6050A, and SAE AMS2806 specifications. To be eligible, providers must maintain a QSDL listing for FSGs 95 and 96 and possess the capability to handle invoicing via the Wide Area Workflow system. Deliveries of the specified steel bar lengths, accompanied by Mill-Material Certification, are to be made to the Sagami Storage Facility in Japan. All shipments must comply with MIL-STD-129 and ASTM A700 packaging standards. The opportunity is categorized under NAICS code 331221, with a response deadline set for October 19, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 6 hours ago

DEADLINE

Lead Acid Storage Battery Supplier (NSN 6140-01-457-6156)This subcontract through the Defense Logistics Agency involves the supply of 1,001 lead acid, wet, non-spillable storage batteries to support prime contractors for the USS Texas and USS Essex. The required equipment must be Schneider Electric part number RBC11, adhering strictly to NSN 6140-01-457-6156 specifications. The contract mandates a Type I shelf life of three months and requires sampling and packaging to be conducted in accordance with MIL-STD-1916, ASQ H1331, MIL-STD-2073-1E, and MIL-STD-129. This procurement falls under NAICS code 335910, with a response deadline set for October 27, 2026.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

HAZMAT Packaging and Shipping ServicesThis subcontract for HAZMAT Packaging and Shipping Services involves providing specialized packaging, marking, and transportation for hazardous material shipments supporting prime contractors on Defense Logistics Agency supply contracts. The scope of work specifically requires the delivery of packaged batteries accompanied by completed hazardous materials declarations. All operations must be performed by HAZMAT certified personnel in strict accordance with DOT compliance and military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the contractor must ensure full adherence to FED STD 313D and DFARS 252.223-7001 regulations.

Motor Vehicle Towing

POSTED

about 6 hours ago

DEADLINE

Manufacture and Supply of Air Duct Cooling CoilsThis subcontract involves the manufacture and supply of three air duct type cooling coil units, identified by NSN 4720-01-462-4309, for prime contractors supporting Defense Logistics Agency Troop Support contracts. The fabrication process must strictly adhere to TDP Rev A Gen 1 and SAE AS115K standards to ensure technical compliance. Quality assurance will be managed through MIL-STD-1916 or ASQ H1331 zero-based sampling, while all marking and packaging must comply with MIL-STD-129 and MIL-STD-2073-1E. The project falls under NAICS code 333912 and is managed by the Department of Defense.

Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS