Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Drain Cock (NSN 482014805801)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the procurement and delivery of three units of a drain cock component identified by NSN 4820014805801 and part number EP0002573, intended for delivery to a U.S. Army facility located in Yakima, Washington. The item is classified under NAICS code 332919, indicating it falls within the manufacturing sector for other fabricated metal product manufacturing. Full compliance with U.S. military logistics standards is required, including strict traceability throughout the supply chain, proper documentation, and adherence to all Department of Defense acquisition protocols. The contract is structured as a subcontract and was posted on July 16, 2026, under the oversight of the Defense Logistics Agency on behalf of the Department of Defense. Delivery must meet all military specifications for quality, labeling, and packaging, with performance fulfillment tied to federal procurement systems and tracking mechanisms to ensure accountability and readiness support.

General Info

Procure three drain cock components for U.S. Army Yakima, compliance with DoD standards required.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7LX26FB568.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COCK, DRAIN

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 3 units of 'COCK, DRAIN' (NSN: 4820014805801, P/N: EP0002573) to a U.S. Army facility in Yakima, WA, with full compliance to military logistics, traceability, and delivery requirements.

Similar Contracts

Same NAICS industry code

48--STEM,NEEDLE VALVE

Solicitation # N0010426QNE64

This presolicitation is for the procurement of two needle valve stems under NSN 1H-4820-015445318-L1, to be delivered to the Portsmouth Naval Shipyard in Kittery, Maine. The government possesses full rights to the technical data package, which is complete and free of manufacturing or engineering restrictions, making these parts candidates for full and open competition. While the government currently intends to solicit and negotiate with a single source under FAR 6.302-1, all responsible sources are invited to submit capability statements or proposals within 45 days of publication to demonstrate their ability to meet the requirement. The acquisition is managed by the Navsup Weapon Systems Support Mech in Mechanicsburg, Pennsylvania, with a response deadline of September 15, 2026. Technical documentation and standards are available through the DoD Single Stock Point and the ASSIST-Online database. The government has determined that FAR Part 12 for commercial items will not be used, although interested parties may notify the contracting officer of a commercial solution within 15 days. This procurement may be subject to the Buy American Act and various Free Trade Agreements.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPE7M4-26-U-0418

Solicitation SPE7M4-26-U-0418 is an Indefinite Delivery Contract issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division, for the procurement of hose elbows. This total small business set-aside under NAICS 332919 seeks an estimated quantity of 23 units of NSN 4730-01-603-2308, specifically Daimler Truck North America LLC part number HLD XB11298. The contract includes a guaranteed minimum quantity of 3 units, with a per-order maximum value of 350,000 dollars. Delivery is required within 87 days after the delivery order is placed, with terms set as FOB Origin and delivery to DLA Direct, CONUS. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and bar-coding, ASTM D3951 for packaging, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Inspection and acceptance will occur at the destination. Administrative requirements include mandatory electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Statute, and the prohibition of covered defense telecommunications equipment. Proposals must be submitted electronically via the DIBBS portal by August 14, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

COUPLING HALF, QUICK

Solicitation # SPE7M4-26-U-0416

Solicitation SPE7M4-26-U-0416 is an Indefinite Delivery Contract issued by the Department of Defense Fluid Handling Division for the procurement of Quick Coupling Halves, identified by NSN 4730015772241 and part number PH B25. This total small business set-aside under NAICS 332919 has an estimated quantity of 37 units with a contract ceiling of 350,000 dollars. The delivery requirement is 87 days after receipt of order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, with ASTM D3951 serving as a secondary standard. Special requirements include the prohibition of Class I ozone-depleting chemicals and mandatory compliance with hazard communication standards for any hazardous materials, including the submission of Safety Data Sheets. All invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Proposals must be submitted electronically via the DIBBS portal by August 14, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # N0010426QNE13

This solicitation is for the procurement of a 4-inch swing check valve assembly, designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury or loss of the vessel. The requirement specifies adherence to Emerson Crosby Drawing DS-B-90380, Revision E, Interim Change 3, and mandates strict compliance with various military and federal standards, including ASTM-B369 for the body and cover and QQ-N-286 for studs. The contract is DX certified for national defense under the Defense Priorities and Allocations System and requires a one-year warranty from the date of delivery. The contractor must implement rigorous quality control and certification processes, including hydrostatic and seat tightness pressure tests, radiography of the body and cover, and liquid penetrant inspections. Detailed material traceability is mandatory, and all fasteners must be marked according to MIL-DTL-1222 and NASM 17828. The agreement requires a bilateral execution and mandates that any offeror who is not the Original Equipment Manufacturer provide a signed letter of authorization. Final acceptance is based on a zero-defect policy for lot acceptance, with comprehensive documentation and a Special Emphasis Certificate of Compliance required upon delivery.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Purchase and Delivery of Culvert Supply for Chattooga River Ranger District

Solicitation # 12444026Q0173

Solicitation number 12444026Q0173 is a request for quotations for the purchase and delivery of culvert supplies to support the Chattooga River Ranger District. This acquisition is managed by the Department of Agriculture under the Csa East 2 Usda-Fs office, with the place of performance located in Lakemont, Georgia. This opportunity is a total set-aside for small business concerns falling under NAICS code 332919, with a size standard of 750. Interested responsible sources must submit their quotations by August 21, 2026, at 5:00pm ET, as late submissions will not be accepted.

Csa East 2 Usda-Fs

POSTED

DEADLINE

48--VALVE,REGULATING,FL, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QNE35

This contract is a solicitation for the repair and refurbishment of a regulating valve designated as Special Emphasis material, meaning its failure could result in serious personnel injury or loss of shipboard systems. The scope of work involves the teardown, evaluation, and refurbishment of the valve to specific drawings and maintenance standards, including rigorous material certifications for components like the valve body, caps, studs, and nuts. The contractor is required to provide a firm-fixed price quote within 120 days of receiving the carcass and must adhere to a requested repair turnaround time of 832 days, with financial penalties for non-compliance. The agreement mandates strict quality assurance and traceability protocols, including quantitative chemical and mechanical analysis, non-destructive testing, and specific heat treatment records. All materials must be traceable via unique markings, and the contractor must provide a comprehensive certificate of compliance. The contract is certified for national defense under the Defense Priorities and Allocations System and requires the contractor to maintain authorized access to confidential documents. Final acceptance is subject to government inspection and adherence to strict pressure testing and sampling plans.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--GUIDE,VALVE STEM

Solicitation # N0010426QNE38

This solicitation is for the procurement of a valve stem guide, designated as Special Emphasis material due to its use in crucial shipboard systems where failure could result in serious injury or loss of the vessel. The contractor must adhere to strict quality standards, including ISO-9001 and specific Navy welding and brazing specifications. Key requirements include the use of SAE AMS 5643 material, non-destructive testing for weld repairs, and precise thread inspection per FED-STD-H28. The contract is DO certified for national defense under the Defense Priorities and Allocations System. The contractor is required to provide a comprehensive certificate of compliance and detailed test certifications via the Wide Area Workflow (WAWF) system. All materials must be mercury-free, and any deviations or engineering change proposals must be approved by the Contracting Officer. Government source inspection is required, and the contractor must maintain a documented quality system available for audit. Final delivery is contingent upon the review and acceptance of certification data by the Portsmouth Naval Shipyard.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QEE08

This solicitation is issued by the Navsup Weapon Systems Support Mech for the procurement of a valve cap under NAICS code 332919. The contract is a total small business set-aside and follows a fixed-price structure with FOB-destination shipping. It mandates strict adherence to technical documentation, including the Individual Repair Part Ordering Data (IRPOD), and requires the contractor to maintain an approved inspection system. All pricing remains valid for 60 days following the closing date. Key requirements include the prohibition of mercury in hardware and strict compliance with export controls, as certain technical documents are not releasable to foreign nationals. Contractors must submit pre-manufacturing packages and lower-tier supplier identification within 45 days of award, with final test and inspection reports due by the end of the contract. Quality assurance and packaging must align with specific military standards, including MIL-PRF-23199 and MIL-STD-2073, and all deliverables must be processed through the Wide Area Workflow payment system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QED73

This solicitation, issued by the Navsup Weapon Systems Support Mech for the procurement of discs and rings, is a total small business set-aside. The contract emphasizes strict adherence to technical documentation, including Individual Repair Part Ordering Data, drawings, and military specifications, which are accessible via the BPMI website. It establishes a clear order of precedence for document conflict resolution and mandates that any deviations or waivers regarding technical requirements or delivery dates be submitted with full justification and technical data for evaluation. Key operational requirements include the prohibition of mercury, specific cleanliness and packaging standards under MIL-PRF-23199, and the mandatory use of Workflow Pro for modifications. The contractor must maintain an acceptable inspection system and submit pre-manufacturing procedure packages within 45 days of award. Additionally, the contract includes cybersecurity maturity model certification requirements, export controls restricting distribution to foreign nationals, and a requirement that pricing remain valid for 60 days following the closing date.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

48--VALVE,LINEAR,DIRECT

Solicitation # N0010425QZB05

The contract involves the procurement of four units of a specific valve, identified as NSN 7H-4820-011043312, TDP VER 003, in accordance with reference number 3189122, with delivery FOB origin. The government has determined that it does not own the necessary data or rights to acquire or repair this part from other sources, as obtaining such data or rights is deemed uneconomical. Consequently, the contract will be awarded through a sole-source process under FAR 6.302-1, with negotiations conducted exclusively with one source. However, other responsible sources are invited to submit their interest, capability statements, proposals, or quotations within 45 days of the synopsis publication, or 30 days if an award is made under an existing Basic Ordering Agreement. The government retains sole discretion to decide whether to proceed with competition based on the responses received, and this notice does not constitute a solicitation for competitive proposals. The contract is associated with a presolicitation titled "48--VALVE,LINEAR,DIRECT," issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, under the Department of Defense. Interested parties can contact Robert Langel via email or phone for further information. The procurement process is part of the government’s effort to acquire the specified parts efficiently, given the constraints related to data rights and the economic impracticality of reverse engineering or sourcing from multiple vendors.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

BALL,VALVE,PORTED

Solicitation # N0010426QFE38

This contract pertains to the repair and supply of a ported valve ball designated as SPECIAL EMPHASIS material due to its critical role in shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The item must be refurbished to "like new" or "A" condition through a rigorous process involving teardown, inspection, replacement of non-suitable parts, and full compliance with specific NAVSEA drawings and military specifications such as MIL-STD-792, ASTM-B381, and S9074 series welding standards. The ball must meet precise dimensional and surface tolerances, including spherical waviness limits and Teflon coating requirements per Chemours specifications. Material traceability is mandatory, requiring unique markings linked to chemical and mechanical test certifications, with electronic signatures accepted under strict control protocols. All certifications must be submitted via WAWF to Portsmouth Naval Shipyard with designated DODAACs N50286 and N39040, and no material may ship without prior acceptance. The contract mandates a firm fixed price with a quantity of 26 units, deliverable within 146 days of contract effective date, and includes mandatory submission of beyond-repair pricing and new item cost estimates. Quality assurance is exceptionally stringent, requiring full compliance with ISO-9001 and either ISO-10012 or ANSI-Z540.3 with ISO-17025 for calibration, and a quality system subject to government audit. All welds, brazing, and repairs require pre-approval of procedures and qualification data, with weld filler metals subject to Lot-specific certification. Government source inspection is required at contractor and subcontractor facilities, and all nonconformances must be documented and reported. The order is DO-rated under the Defense Priorities and Allocations System and issued under Emergency Acquisition Flexibilities. Small business set-aside provisions apply, and the contractor must maintain configuration control, submit engineering change proposals for any modifications, and ensure mercury-free compliance. The item falls under a Level 1 Repair classification with zero-defect requirements for final inspection and 100% verification of traceability and certification data.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CAP, VALVE ASSEMBLY

Solicitation # N0010426QEE06

This solicitation is for the procurement of a valve assembly cap for the Department of Defense, managed by the Navsup Weapon Systems Support Mech. The contract is a fixed-price agreement with FOB-destination terms, requiring strict adherence to the Individual Repair Part Ordering Data (IRPOD) and specific military quality standards. Key requirements include the prohibition of mercury, mandatory use of Workflow Pro (WFP) Mod Assist, and compliance with cybersecurity maturity model certification levels. The award is subject to a total small business set-aside and requires the contractor to meet all aspects of Appendix A to LSC-2E. Technical documentation and drawings are subject to strict export controls and are not releasable to foreign nationals without prior approval from the Naval Sea Systems Command. Contractors must submit pre-manufacturing packages and lower-tier supplier identifications within 45 days of the award. Final delivery requires a complete package of Vendor Certified Reports of Test and Inspection. Pricing for the quotation remains valid for 60 days after the closing date, and the contractor must maintain an inspection system acceptable to the government.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Chemical Sealer Supply and Delivery

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Aerosol Coating (GRE)

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Coating Compound (NSN 8010006410427)

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Isopropyl Alcohol Supply and Delivery

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Adhesive Supply – NSN 8040000168662 / P/N 420504

Adhesive Manufacturing

POSTED

about 21 hours ago

DEADLINE

First Article Testing (FAT) Waiver Maintenance and Source Continuity

Drafting Services

POSTED

about 21 hours ago

DEADLINE

Procurement Item Description (PID) Compliance and Technical Documentation

Administrative Management and General Management Consulting Services

POSTED

about 21 hours ago

DEADLINE

Surge and Sustainment Supply Chain Management

General Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

Global Logistics and Time Definite Delivery (TDD) Services

Packing and Crating

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Handling and Compliance

Remediation Services

POSTED

about 21 hours ago

DEADLINE

Supply of Water Purification System Components (ROWPU, TWPS, LWP, WDS)

Other Commercial and Service Industry Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Polyurethane Coating Supply

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE