Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Electrical Connectors (Plug Type)

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture or supply of 70 units of military-specification electrical plug connectors identified by NSN 5935003397655, intended exclusively for use by the Department of Defense. These connectors must meet stringent defense standards to ensure reliability and interoperability in military applications, with the full scope of technical requirements embedded within the associated specifications for mil-spec components. The procurement is structured as a subcontract under the NAICS code 335931, which designates electrical component and accessory manufacturing, and is being managed by the Maritime Supply Chain division of the Department of Defense. The solicitation was posted on August 4, 2026, with a firm response deadline of August 19, 2026, giving interested suppliers approximately two weeks to submit proposals. While no set-aside designation is applicable, the contract is open to qualified contractors capable of fulfilling the mil-spec requirements and delivering the specified quantity within the required timeframe. Performance is expected to support Defense logistics needs, though no specific delivery location is detailed. The official solicitation can be accessed through the DIBBS portal, providing further details on compliance, certifications, and submission protocols.

General Info

Supply 70 mil-spec electrical connectors for DoD by August 19, 2026, per NSN 5935003397655.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture or supply of 70 units of mil-spec electrical plug connectors (NSN: 5935003397655) for Department of Defense use.

Similar Contracts

Same NAICS industry code

RETAINER, ELECTRICAL

Solicitation # SPE7M5-26-Q-0839

The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-Q-1282

The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-12UK

The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-12SN

The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.

ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-368G

The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.

ACTIVE DEVICES DIVISION

POSTED

about 1 hour ago

DEADLINE

BATTERY POWER SUPPLY

Solicitation # SPE7LX-26-U-9315

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPRMM126QKG70

This contract pertains to the procurement of a HEX RECT ASSY under emergency acquisition authority, with all contractual documents considered issued upon electronic transmission or mail delivery. The item must be manufactured to exact specifications defined by MIL-STD-130 for marking and MIL-I-45208 for quality inspection, with ISO 9001 certification accepted as an alternative. The contractor must be the original equipment manufacturer or an authorized distributor, with clear identification of the OEM via CAGE code and part number; refurbished materials are strictly prohibited. All items must be mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and a warning plate. Inspection is required at the source, and the supplier must maintain a government-acceptable quality system, with records retained for four years post-delivery. Packaging must comply with MIL-STD-2073, and no changes to design, material, or production site are permitted without formal written approval and a $250 administrative cost reduction. The contract mandates use of WAWF for invoice and receiving report submission, and compliance with CMMC Level 1 cybersecurity self-assessment. Award will be granted based on the Lowest Price Technically Acceptable method, with all proposals subject to strict technical compliance. The contractor must provide an email for communication and is strongly encouraged to register for EDA via PIEE to receive automated notifications of contract actions. The solicitation prohibits distribution of Navy-provided documents without proper Distribution Statement compliance, with specific controls for NoFORN and Export Controlled data. Small business representation is required under NAICS code 335931, and additional deviations apply for annual certifications and cybersecurity. Deliveries must align with specified timelines, and failure to disclose exceptions in EDI submissions will result in award based solely on solicitation terms. Any post-award changes will incur cost deductions. The procurement is managed by DLA Mechanicsburg, and all vendor interactions must conform to the detailed quality, traceability, and security protocols outlined throughout the contract.

SPRMM1 DLA Mechanicsburg

POSTED

about 6 hours ago

DEADLINE

61--POWER SUPPLY, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QPB79

The contract pertains to the repair or modification of a power supply under solicitation number N0038326QPB79, issued by the Naval Supply Systems Command Weapon Systems Support office in Philadelphia, Pennsylvania. The opportunity is open for response until August 24, 2026, and is classified under NAICS code 335931, indicating it relates to electrical equipment manufacturing. Key contractual clauses include mandatory use of Workflow Pro Assist Module for payment processing, compliance with the Buy American Act and related free trade agreements, and adherence to security prohibitions and equal opportunity requirements for workers with disabilities. Warranty provisions mandate a 12-month coverage period with a 60-day window following defect discovery for claims. Inspection and acceptance procedures are strictly defined, and the use of Wide Area Workflow for invoice and receiving report submission is required. The contract also enforces mandatory national defense priority ratings and prohibits certain classified or restricted information disclosures under Department of Defense deviations. The point of contact for this solicitation is Jason J. Sklencar, reachable via email at jason.j.sklencar.civ@us.navy.mil and phone at 771-229-0565, with supplemental contact information listed as 215-697-4179. Payment and documentation must comply with Navy-specific financial protocols, including the use of invoice and receiving report combos as directed in the Schedule. Compliance with the Alternate A annual representations and certifications is required, and royalty obligations are governed by longstanding provisions. The contract applies to all noncomplex supplies with specific valuation and identification requirements, and all offerors must ensure alignment with the Navy’s AbilityOne support contractor policy and the full suite of federal acquisition regulations governing national defense procurement. No place of performance details are specified beyond the issuing office’s location.

Navsup Weapon Systems Support

POSTED

about 6 hours ago

DEADLINE

in about 2 hours

Solicitation # N0010426QEC99

Navsup Weapon Systems Support Mech

POSTED

about 6 hours ago

DEADLINE

in about 1 month

Expose/Conceal Harness Supply

POSTED

DEADLINE

Motor Controller Harness (B+ and B-) Supply

POSTED

DEADLINE

Limit Switch Cable Assembly Supply

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 1 hour ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 1 hour ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 1 hour ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract is for the procurement of 11 electrical connector receptacles with part number 2583A-125 and NSN 5935-01-524-0367, supplied by PAULUHN ELECTRIC MANUFACTURING LLP under solicitation SPE7M1-26-U-5053. Delivery is required within 57 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA DIRECT, CONUS, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted. The unit of issue is each, with a total price of $11.00, and the contract includes strict requirements for removal of government identification from non-accepted supplies and bare item marking. All packaging and labeling must align with the specified QUP of 001 and DLA unit of issue guidelines.

Electronic Connector Manufacturing

POSTED

about 1 hour ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 1 hour ago

DEADLINE

COIL, ELECTRICAL

Solicitation # SPE7M1-26-T-250E

The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 1 hour ago

DEADLINE

Solicitation # SPE7M1-26-Q-1336

This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 1 hour ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-T-250B

This contract covers the procurement of a fluid filter element identified by NSN 4330012808418 and part number F64318, with approved suppliers including Falls Filtration Technologies Inc., Wix Corp, Honeywell International Inc, Donaldson Company Inc, and Genuine Parts Company. The item is classified as a critical application and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The unit of issue is each, with a contract quantity of two units to be delivered within 20 days from the award date, FOB origin, under Solicitation SPE7M1-26-T-250B. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling governed by these standards. Shipping must occur via the fastest traceable method, excluding parcel post, and all deliveries must be directed to the specified address at Aberdeen Proving Ground, Maryland. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required delivery date is August 3, 2026, and the contract includes a government-only point of contact and tracking identifiers for logistics and accountability.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 1 hour ago

DEADLINE

CIRCUIT BREAKER

Solicitation # SPE7M1-26-U-5050

The contract solicits 134 units of a circuit breaker identified by NSN 5925-01-430-2318 under solicitation number SPE7M1-26-U-5050, with a response deadline of August 20, 2026, and a required delivery within 99 days of award. The item is classified as a commercial item description, eliminating the need for a Form 239 and enabling competitive procurement using data available through the drawing repository referencing the CID number and NSN. All supply requirements must comply with the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The contracting activity falls under the Department of Defense’s Maritime Supply Chain, with primary point of contact Bryan Fair reachable via email and phone. The solicitation is posted on DIBBS, and performance is expected within U.S. territory.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 1 hour ago

DEADLINE