Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Electrical Plug Connectors (NSN 5935-01-344-0131)

Active

Federal

Response Deadline10/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of four electrical plug connectors, identified by NSN 5935-01-344-0131, for prime contractors delivering to the DLA Land and Maritime agency. The selected provider must source or manufacture the components and ensure all packaging and palletization adhere to MIL-STD-2073-1E and RP001 standards, with markings applied according to MIL-STD-129. The contract is managed by the Active Devices Division of the Department of Defense, with performance taking place in FPO 96683. To facilitate invoicing through WAWF, the contractor is required to maintain an active CAGE code and SAM registration. The response deadline for this opportunity is October 5, 2026.

General Info

Supply four electrical plug connectors for DLA Land and Maritime by October 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

FPO, AP, 96683, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-520B.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR, PLUG, ELECTRI

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 23

subcontract

Response DeadlineOct 5

Submission deadline

Response Deadline

10/05/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical plug connectors for prime contractors delivering to the DLA Land and Maritime agency. Sources or manufactures components identified by NSN 5935-01-344-0131. Performs packaging and palletization per MIL-STD-2073-1E and RP001, and applies markings per MIL-STD-129. Requires active CAGE code and SAM registration for WAWF invoicing. Delivers four units of packaged and marked connectors.

Similar Contracts

Same NAICS industry code

Supply of Coupling Shaft ElementThis subcontract involves the procurement or manufacture of one Coupling Shaft Element for prime contractors supporting DLA and Air Force supply contracts. The component must be produced according to NSN 3010-01-523-4653 specifications, with the option to utilize additive manufacturing. All items must be packaged in accordance with ASTM D3951 and marked per MIL-STD-129, while ensuring full compliance with DFARS 252.223-7008 and DFARS 252.225-7048. The final product is to be delivered to Kirtland AFB in New Mexico. This opportunity is managed by the Department of Defense under the Land Supplier Operations Vehicle Support agency, falling under NAICS code 335999. The response deadline for this requirement is October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Supply of Indicator Lights (NSN 6220226408705)This subcontract involves the manufacture or sourcing of 2,000 indicator lights for prime contractors supporting Defense Logistics Agency supply contracts. All units must strictly adhere to the technical specifications of NSN 6220226408705 and the DLA Master List of Technical and Quality Requirements. The contractor is responsible for ensuring materials are packaged according to ASTM D3951 and palletized per RP001, with final delivery of the finished goods handled as FOB Origin. Compliance is required with FAR 52.223-23 and specific telecommunications restrictions. The contract falls under NAICS code 335999 and is managed through the Department of Defense. Interested parties must respond by October 5, 2026, to meet the requirements set forth by the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Manufacturing and Supply of Branched Wiring Harnesses (NSN 5995-01-188-3269)This subcontract with the Department of Defense ASC Commodities Division involves the fabrication and assembly of branched wiring harnesses identified by NSN 5995-01-188-3269. The selected provider is responsible for delivering 6,622,000 units and a First Article Test report to validate production quality. All items must be packaged according to RP001 DLA Packaging Requirements. The contract is a Total Small Business Set-Aside under NAICS code 335999. To ensure compliance and access to necessary technical data, the contractor must maintain JCP Certification and adhere to ITAR and EAR regulations. The response deadline for this opportunity is October 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Electrical Insulating Compound Kit SupplierThis subcontract involves the supply of electrical insulating compound kits to prime contractors supporting DLA Land and Maritime supply contracts. The requirement specifically calls for NSN 5970-01-119-4549, utilizing either National Starch and Chemical Co or Henkel US Operations Corporation part number 2651 MM with Catalyst 9. All items must be packaged according to MIL-STD-2073-1E standards for the delivery of one completed kit. The opportunity is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency. Performance is located in Bremerton, Washington, and falls under NAICS code 335999. The solicitation was posted on September 23, 2026, with a response deadline of October 1, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

Marine Navigational Light SupplyThis subcontract involves the supply of two specialized marine navigational lights, specifically part number 300-112G2-PRO-I, which must meet the specifications for NSN 6220226408703. The contract is designed for prime contractors delivering to the Defense Logistics Agency under NAICS code 335999. Shipping is managed under FOB Origin terms with a required delivery timeline of 10 days from the date of the award. To be eligible, providers must possess a valid CAGE code and UEI. The response deadline for this opportunity is October 5, 2026.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Power Supply Assembly Supplier (NSN 6130014762036)This subcontract involves the manufacture and supply of Power Supply Assemblies, specifically NSN 6130014762036, for prime contractors supporting Defense Logistics Agency Land and Maritime contracts. The supplier is responsible for sourcing or producing the assemblies, ensuring all packaging adheres to RP001 DLA requirements, and labeling hazardous materials in compliance with 29 CFR 1910.1200. Final delivery of the hardware must be made to the designated DLA location. The opportunity is categorized under NAICS code 335999 and is managed by the Department of Defense through the Defense Logistics Agency. The place of performance is listed as FPO 96675. Interested parties must respond by the deadline of October 5, 2026, following the posting date of September 23, 2026.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Power Supply Unit SupplierThis subcontract under the Maritime Supply Chain for the Department of Defense involves the manufacture or sourcing of a power supply unit for prime contractors. The supplier must ensure all units meet the DLA Master List of Technical and Quality Requirements and adhere to FAR 52.204-24 regulations concerning telecommunications equipment. Additionally, the provider is responsible for delivering a technical data package for packaging development and ensuring all marking complies with MIL-STD-129. The contract is categorized under NAICS code 335999 and requires delivery of the hardware and technical data on a FOB Destination basis. The place of performance is listed as FPO 09523. Interested parties must respond by October 5, 2026, following the posting date of September 23, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Branched Wiring Harness Supply (NSN 6150-01-626-6130)This subcontract involves the fabrication and assembly of 14 branched wiring harnesses meeting NSN 6150-01-626-6130 specifications for prime contractors under the Defense Logistics Agency. The selected provider must be ISO 9001:2015 certified and ensure all items undergo quality assurance testing and packaging in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The project is a total small business set-aside under NAICS code 335999 for the ASC Commodities Division of the Department of Defense. All units must be delivered within 84 days after receipt of order. The response deadline for this opportunity is October 8, 2026.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

TAPE, INSULATION, ELE

Solicitation # SPE4A7-26-T-787H

This contract is for the procurement of two rolls of red-orange electrical insulation tape conforming to MIL-I-22444C, with a width of one inch and a thickness between 0.015 and 0.020 inches. The item is designated as a critical application item with a non-extendable shelf life of 12 months. Delivery is required within 95 days, with inspection and acceptance occurring at the origin. The contractor must adhere to strict quality and testing standards, including ISO 9001:2015 requirements and the submission of a first article report based on MIL-HDBK-831. First article testing requires a 100 percent dimensional characteristics check on two items. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements, while sampling will follow MIL-STD-1916 or ASQ H1331.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

MOUNTING BASE, ELECTRICAL EQUIPMENT

Solicitation # SPE4A7-26-R-0782

Solicitation SPE4A7-26-R-0782 is an Indefinite Quantity Contract issued by DLA Aviation for the procurement of General Purpose Resilient Mounts, identified by NSN 5975-01-480-6930. The contract features a two-year base period with no additional options. It specifies an estimated annual demand of 535 units with a guaranteed minimum of 132 units. Delivery is required within 240 days after receipt of order, with the point of inspection and acceptance set at the destination and the FOB point at the origin. The government will determine the best value award based on a comparative assessment of price and non-price factors, with past performance, specifically SPRS assessments, weighted most heavily. Quality requirements are stringent, requiring compliance with ISO 9001-2015 or SAE AS9100, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129. The contract includes a one-year warranty from the last delivery and mandates the use of the Wide Area WorkFlow system for all invoicing and payment requests. Additionally, the contractor must comply with cybersecurity standards including DFARS 252.204-7012 and CMMC requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA

Solicitation # SPE4A6-26-R-XE19

Solicitation SPE4A6-26-R-XE19 is an Indefinite Delivery Purchase Order issued by the DLA Aviation ASC Commodities Division for the procurement of special purpose electrical cable assemblies, identified by NSN 5995-01-719-1088. This is a source-controlled item that must be manufactured and tested according to cited limited rights data; consequently, only vendors with access to this data or traceability to approved sources are eligible to quote. The contract is established as a firm fixed price agreement with a base period of five years, remaining valid until the aggregate total of orders reaches a ceiling of 350,000 dollars. The estimated annual demand is 20 units, with a guaranteed minimum quantity of 5 units for the base year. Deliveries are required within 82 days after receipt of order to various CONUS stock locations, with inspection and acceptance occurring at the destination. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129 and specific bare item marking requirements under RQ017. Evaluation for award will be based on a combination of price and non-price factors, with significant weight placed on past performance, specifically SPRS assessments and historical quality and delivery compliance. All offerors must be registered in the System for Award Management and complete all required representations and certifications to be considered technically acceptable.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

INSULATING COMPOUND KI

Solicitation # SPE7M0-26-T-097Z

Solicitation SPE7M0-26-T-097Z is a fixed-price request for quotation issued by DLA Land and Maritime for one electrical insulating compound kit, identified by NSN 5970-01-119-4549. The required item is a commercial off-the-shelf product, specifically National Starch and Chemical Co P/N 2651 MM or Henkel US Operations Corporation P/N 2651 MM, both with Catalyst 9. Each kit consists of a 2-lb can of resin and a 4-oz bottle of catalyst packaged together in a 1-gallon pail. The item is classified as a hazardous material, specifically a tetraethylenepentamine solution under Hazard Class 8, Packaging Group III. Due to this classification, the contractor must provide SDS and OSHA hazard warning labels for approval by technical personnel prior to award and adhere to IP025 and 29 CFR 1910.1200 labeling standards. The contract specifies a delivery timeframe of five days after order, with a required delivery date of September 18, 2026, to the Puget Sound Naval Shipyard in Bremerton, Washington. Delivery, inspection, and acceptance are all set as FOB Destination. The item is subject to a non-extendable 12-month shelf life and requires special marking code 32. Packaging must comply with MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking and bar-coding. Quality assurance will be managed via sampling methods according to MIL-STD-1916 or ASQ H1331. All quotes must be submitted through the DIBBS system by October 1, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Supply of Schneider Electric Circuit BreakersThis subcontract involves the procurement of 10 Schneider Electric circuit breaker units, part number QOB115VH, to support prime contractors on projects for the NSWC Philadelphia Division. The selected provider is responsible for sourcing the components and ensuring all packaging and palletization strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The contract is managed by the Active Devices Division of the Department of Defense under NAICS code 423610. All units are to be delivered to the NSWC Philadelphia Division located in Philadelphia, Pennsylvania. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and HazMat Shipping ServicesThis subcontract for the Department of Defense Active Devices Division involves providing specialized military packaging, marking, and shipping services for prime contractors. The contractor is responsible for ensuring all shipments are fully compliant and ready for FOB Origin delivery, adhering to strict standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. A critical component of the requirement is the application of hazard warning labels in accordance with DFARS 252.223-7001 and 29 CFR 1910.1200, which necessitates the use of certified HazMat shipping personnel. The work is to be performed in Mechanicsburg, Pennsylvania, with a response deadline of October 5, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Filter Subassembly Fabrication and SupplyThis subcontract involves the fabrication and supply of a completed Filter Subassembly for prime contractors working on Department of Defense projects under the Active Devices Division. The manufacturer must produce the subassembly according to NSN 5915016574723 and the DLA Master List of Technical and Quality Requirements, with a specific prohibition against the use of additive manufacturing. The contractor is responsible for performing all quality control and inspection necessary to meet destination acceptance points and must strictly adhere to MIL-STD-129 and MIL-STD-2073-1E for packaging and marking. The final deliverable is one packaged and marked Filter Subassembly to be performed in Mechanicsburg.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Electromagnetic Relays (NSN 5945-00-768-7083)This subcontract involves the supply of 43 electromagnetic relays for prime contractors supporting the Department of Defense Active Devices Division. The supplier is responsible for manufacturing or sourcing components that strictly adhere to Drawing 7700026 Rev G and NSN 5945-00-768-7083. All deliverables must comply with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, including specific unit package markings for component lead finish. The performance of this contract is based in New Cumberland, Pennsylvania, under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Receptacle Connector (NSN 5935-01-487-3558)This subcontract involves the procurement of a single specialized electrical receptacle connector, identified by NSN 5935-01-487-3558, for prime contractors working on Active Devices Division projects under the Department of Defense. The selected provider is responsible for sourcing or manufacturing the component and ensuring all deliveries are accompanied by Safety Data Sheets that comply with 29 CFR 1910.1200(g) and Federal Standard No. 313 per FAR 52.223-3 for hazardous materials. The opportunity was posted on September 23, 2026, with a response deadline of October 5, 2026. Classified under NAICS code 334417, the contract specifies the place of performance as FPO 96672.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

Defense Electronics Packaging and Marking SpecialistThe Defense Electronics Packaging and Marking Specialist subcontract involves providing specialized packaging and marking services for prime contractors on Defense Logistics Agency electronics contracts. The scope of work includes applying unit package markings according to IPC/JEDEC J-STD-609 and MIL-STD-129 standards, as well as utilizing DOD qualified ESD and EMI materials per MIL-PRF-81705 and cushioning per A-A-59136 to protect microcircuits from electrostatic discharge and electromagnetic interference. This opportunity is issued by the Department of Defense under the Active Devices Division and is categorized under NAICS code 339999. The place of performance is located in Columbus, Ohio. The solicitation was posted on September 23, 2026, with a response deadline of October 8, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 10 hours ago

DEADLINE

Digital Microcircuit Supplier (NSN 5962-01-050-2777)This subcontract with the Active Devices Division of the Department of Defense involves the supply of three specialized digital microcircuits under NSN 5962-01-050-2777. The supplier must provide authentic components matching part numbers from Spectrum Microwave or BI Technologies, ensuring full traceability through required test reports and the completion of DLA Form 918 for the Counterfeit Detection and Avoidance Program. Compliance requirements include a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 standards. The performance location is based in Columbus, Ohio, with a response deadline of October 8, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Waveguide Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of a precision Waveguide Assembly, identified by NSN 5985010609052, for the Department of Defense Active Devices Division. The contractor is responsible for fabricating the assembly according to Reference Drawing 97942 646R922, Revision J, and must successfully execute a Government First Article Test to validate performance. The work requires specialized precision metal fabrication equipment and Covered Defense Telecommunications representation to support prime contractors delivering DLA Aviation supply contracts. The project is categorized under NAICS code 334413 and will be performed in Fallon, Nevada. Interested parties must respond by October 5, 2026, to meet the requirements for delivering one completed assembly that passes all necessary testing protocols.

Semiconductor and Related Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Hazardous/Non-Hazardous Materials Packaging and ShippingThis subcontract for the Department of Defense Active Devices Division involves providing specialized packaging and traceable shipping services for prime contractors on Defense Logistics Agency supply contracts. The scope of work includes the packaging of hazardous materials according to TQ IP025/FED-STD-313 and non-hazardous materials per ASTM D3951, with all markings adhering to MIL-STD-129 and palletization following RP001 standards. The contractor is responsible for utilizing industrial palletization and labeling equipment to prepare shipments for delivery via a traceable carrier. This opportunity falls under NAICS code 339943, with a response deadline of October 5, 2026.

Marking Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Electrical Equipment/Component SupplierThis subcontract opportunity with the Department of Defense Active Devices Division involves the supply of electrical equipment and components for prime contractors on Defense Logistics Agency supply contracts. The selected provider must manufacture or source components that strictly adhere to RFQ technical specifications and Buy American Act requirements, ensuring all deliverables meet DLA technical standards through rigorous quality control. Key operational requirements include full compliance with NIST SP 800-171 cybersecurity standards for data protection. The contractor is responsible for the physical delivery of all electrical components to the designated destination. This opportunity falls under NAICS code 335313 and has a response deadline of October 5, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military-Standard Packaging and Palletization ServicesThe Military-Standard Packaging and Palletization Services subcontract, issued by the Department of Defense Active Devices Division, requires specialized packaging, marking, and palletization for prime contractors delivering DLA supply contracts. The selected provider must ensure First Destination Transportation compliance by executing marking according to MIL-STD-129 and palletization per RP001 DLA Packaging Requirements for Procurement, utilizing DLA-approved materials and compliant marking equipment. This opportunity is categorized under NAICS code 561910 and will be performed at Tinker AFB in Oklahoma. The solicitation was posted on September 23, 2026, with a response deadline of October 5, 2026.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Connector Receptacle SupplyThis subcontract with the Department of Defense Active Devices Division involves the supply of connector receptacles for prime contractors fulfilling DLA supply contracts. The provider is responsible for manufacturing or sourcing hardware that adheres to strict technical specifications, including full compliance with the Buy American Act and the Berry Amendment. Performance of this contract requires the use of precision manufacturing equipment and strict adherence to NIST SP 800-171 cybersecurity standards. The contract is categorized under NAICS code 334417 and specifies the place of performance at Tinker AFB, Oklahoma. Interested parties must respond by October 5, 2026, following the posting date of September 23, 2026. The final deliverable consists of physical connector receptacles delivered to the designated destination.

Electronic Connector Manufacturing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS