Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Expendable Aluminum Caps (SOUTHERN BP-100)

Active

State & Local

Response Deadline07/24/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service is procuring 665 units of expendable aluminum caps with part number SOUTHERN BP-100 for use in utility infrastructure applications. The contract requires all units to be sourced exclusively from the original manufacturer or an authorized distribution channel to ensure full compliance with technical and quality standards. The solicitation, classified as a subcontract under NAICS code 332618, was posted on July 20, 2026, with a firm response deadline of July 24, 2026, at 7:00 PM. Performance of the contract is to occur in Nashville, Tennessee. Bidders must be prepared to meet all regulatory and product integrity requirements, and interested parties can access further details through the designated vendor portal at the provided link.

General Info

Nashville Electric Service to procure 665 aluminum caps from authorized sources by July 24, 2026, in Tennessee.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

Nashville, TN, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 07:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of 665 units of expendable aluminum caps, part number SOUTHERN BP-100, for use in utility infrastructure. Must be sourced from original manufacturer or authorized channel with full compliance.

Similar Contracts

Same NAICS industry code

Precision Spring Manufacturing – Helical Compression SpringsThe contract requires the manufacture, testing, packaging, and delivery of helical compression springs adhering strictly to DLA technical standards, ensuring full compliance with origin inspection protocols, configuration control measures, and approved packaging requirements. All work must be executed to meet the precise engineering and quality benchmarks mandated by the Department of Defense, with emphasis on consistency, traceability, and reliability throughout the production lifecycle. Performance of the contract is designated for Greensboro, North Carolina, with a response deadline of July 31, 2026, and the solicitation falls under NAICS code 332618 for other spring manufacturing. This is classified as a subcontract, and while no set-aside type is specified, the procurement is administered by the Land Supply Chain under the Department of Defense, emphasizing its critical role in defense logistics and supply chain readiness.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

Supply of Straight-Headed Pins (NSN: 5315016057397)The contract calls for the manufacture, quality assurance, packaging, and delivery of 89 straight-headed pins designated by NSN 5315016057397, following strict military specifications NASM20392 Rev 01 and NASM5673 Rev 1, with full compliance to the DLA Master List, MIL-STD-129 for labeling and packaging, and ASTM D3951 for commercial packaging standards. All work must adhere to the required technical and procedural benchmarks to ensure interoperability and reliability within defense systems, and the product must be delivered to the specified performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a small business set-aside subcontract under the SBA program, categorized under NAICS code 332618, reserved exclusively for small businesses as defined by the FAR 19.5 regulations. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All submissions must be made through the designated DIBBS platform, and suppliers are expected to demonstrate not only technical capability but also full compliance with federal contracting requirements for small business participation.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of 89 straight-headed pins identified by NSN 5315-01-605-7397 under solicitation SPE4A6-26-T-07VH, with a total value based on a unit price for each item and a required delivery within 165 days from the award date. The items must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, though DLA requirements take precedence. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise defined, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. The product must conform to NASM20392 Rev 01 and NASM5673 Rev 1, with bare item marking and identification per RQ017, and government identification removed from non-accepted items under RQ011. Inspection and acceptance occur at origin, with no variance allowed in quantity. Packaging must adhere to RP001 DLA packaging standards and be palletized accordingly, shipped FOB origin to the delivery address in New Cumberland, Pennsylvania. The contract is a Total Small Business Set-Aside under NAICS code 332618, with a response deadline in July 2026 and delivery required no later than March 7, 2027.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

BLOCK AND TACKLEThis contract pertains to the procurement of 15 units of a Block and Tackle item identified by NSN 3940-01-429-8206 and part number 12365945, under solicitation SPE8EE-26-T-2126, with a required delivery date of July 9, 2026, and a delivery window of 163 days from award. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination, specifically the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking codes applied. Palletization follows DLA’s packaging requirements, and transportation is governed by DLAD procedural notes C19 and C20. The contract enforces stringent quality and cybersecurity requirements: sampling and acceptance criteria mandate zero non-conformances under MIL-STD-1916 or a comparable zero-based plan unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively; unclassified attributes are treated as major. Technical and quality specifications referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment, and the item is classified as a critical application. The purchasing request number is 7017444038, and the point of contact for inquiries is Philip Ferrara of the Department of Defense, with full solicitation details available through the DIBBS system.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 20 hours ago

DEADLINE

PIN, STRAIGHT, HEADEDThe contract specifies the procurement of a single straight-headed pin with part number 901-236-625-275 and NSN 5315-01-649-4032, quantity of one unit, to be delivered within five days under FOB origin terms with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including specified preservation methods and marking requirements, with no special marking needed. The item is designated as a critical application item for The Boeing Company and is subject to non-tailored quality requirements under ISO 9001:2015, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated. Technical and quality requirements referenced by R or I numbers are incorporated by authority of the DLA Master List, and the revision in effect at the solicitation or award date controls depending on acquisition size. Unit of issue is each, and the delivery destination is CAMP LEMONNIER, DJIBOUTI, under a joint task force contract with transportation governed by DLAD procedure notes. Item unique identification is not required per customer request, and all documentation must align with DLA packaging standards and government-specific identification protocols. The contract was posted on July 20, 2026, with a response deadline of July 28, 2026, under solicitation SPE4A0-26-T-3952, managed by the Department of Defense’s Aviation Supply Chain ESOB.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

PIN, GROOVED, HEADEDThe contract solicitation SPE4A6-26-T-00QM calls for the procurement of two grooved headed pins with the NSN 5315-01-517-8894, to be delivered within ten days of award to a military installation in Drawsko Pomorskie, Poland. The item is classified as a critical component requiring source inspection, with acceptance governed by inspection at origin under RQ009 and RQ011, meaning the contractor must demonstrate conformance prior to shipment and the government retains final acceptance authority at that point. Technical and quality requirements are drawn from the DLA Master List of Technical and Quality Requirements, with specific sampling mandates requiring compliance with MIL-STD-1916 or ASQ H1331 Table 1, zero non-conformances in sample lots under MIL-STD-105/ASQ Z1.4, and designated verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The contractor must maintain a tailored ISO 9001:2008 quality management system excluding clause 7.3 or an equivalent such as SAE AS9003, ensuring robust manufacturing controls. Packaging must conform to MIL-STD-2073-1E and RP001, with preservation method 10 and dry climate storage, while labeling and marking must adhere to MIL-STD-129 including barcoding and RDF 555 designation. Transportation must use the fastest traceable means excluding parcel post. Export-controlled technical data associated with this item is subject to ITAR or EAR, requiring compliance with DFARS 252.225-7048, restricting access to contractors with approved US/Canada Joint Certification Program status, completed export control training, and formal DLA authorization. The solicitation mandates electronic invoicing through WAWF and adherence to a suite of federal and defense acquisition regulations, including cybersecurity safeguards under DFARS 252.204-7012, hazardous materials compliance under 29 CFR 1910.1200, and prohibitions on certain foreign-sourced telecommunications equipment. Offerors must possess a Unique Entity ID and CAGE code, represent their small business status if applicable, and disclose supplier information if providing covered defense telecommunications equipment. Pricing is not disclosed in the solicitation, and award will be based on compliance with technical, quality,

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

PIN, STRAIGHT, HEADLEThe contract specifies the procurement of 31 units of a straight, headless pin identified by NSN 5315-01-555-1099 and part number MS20253-4-550, manufactured in accordance with Drawing NR 81205 AS20253 Revision 1 dated 05/30/2001. Delivery is due in 113 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the manufacturer’s location. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified; critical attributes require Verification Level VII or AQL 0.1, major attributes Level IV or AQL 1.0, and minor attributes Level II or AQL 4.0. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements RP001, and all marking and labeling must adhere to physical identification standards RQ017. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies per RQ011. The delivery destination is DLA Distribution San Joaquin in Tracy, CA, with a required ship date of November 19, 2026, and the original delivery date was October 14, 2026. The contract is issued under solicitation SPE4A6-26-T-07WY, with unit of issue in each, and all terms override any conflicting standards unless explicitly amended.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

ROPE, WIREThis contract solicits 45 units of rope, wire under NSN 4010-01-369-6685 with a total requirement of 45 each, subject to a zero variance in quantity. Delivery is required within 167 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging codes and methods for preservation and containment. Government-issued identification must be removed from non-accepted supplies, and no Class I ozone-depleting chemicals may be used in any component or process, with any substitutions requiring prior approval. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-defect sampling plan; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with zero non-conformances required unless otherwise stated in the contract. The contract is a total small business set-aside under NAICS code 332618, with a response deadline of July 23, 2026, and is issued by the Department of Defense’s Combat Vehicles and Armament office. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The designated delivery point and freight shipping address is the DLA Distribution facility in New Cumberland, PA.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

O-RINGOfferors responding to solicitation SPE7L1-26-T-856G for O-RING NSN 5331-00-242-0516 must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with the threshold now set at $150,000, and must disclose any non-domestic materials used. The use of additive manufacturing for any part is prohibited unless explicitly approved by the contracting officer, and offers containing such items will be deemed ineligible for award. Fast Pay is not applicable, and bidders are strongly urged to quote quantity ranges to accommodate fluctuating demand and avoid administrative delays, though this does not apply to Auto IDC. Offerors must also certify that they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for designated categories under FAR provisions 52.212-3 and 52.219-1. All contractors must prepare for mandatory access to the Vendor Shipment Module through DLA’s new Account Management & Provisioning System, with web service users required to update their schema by the specified deadline to maintain shipping capability. Failure to register via AMPS will prevent shipment to DLA. Offerors unable to submit a bid by the closing date must still register a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. The delivery deadline is 175 days after award, with a response deadline of July 31, 2026, and inquiries should be directed to Kristie Fown at DLA.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

ROPE, WIREThe contract specifies the procurement of one unit of rope, wire with NSN 4010-01-732-4216, valued at $815.00, under solicitation SPE4A5-26-T-295W, with delivery required within 20 days after award, by July 14, 2026, to be shipped FOB origin to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584. All items must be packaged in accordance with ASTM D3951, but DLA Master List of Technical and Quality Requirements supersede any conflicting requirements, and packaging must be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack clearly indicated. Palletization must conform to RP001 DLA Packaging Requirements for Procurement. Sampling for inspection must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with zero non-conformances required in the sample lot unless otherwise specified; attributes are to be classified as Critical, Major, or Minor with corresponding verification levels or AQLs, and manufacturers may choose attribute or variable inspection methods. Physical identification of bare items must comply with RQ017, and government identification must be removed from non-accepted supplies per RQ011. Inspection and acceptance occur at origin, and the contractor must maintain a quality assurance system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. The item is designated as a critical application requiring CMMC Level 2 cybersecurity self-assessment, with safeguarding of covered defense information governed by 252.204-7008 and NIST SP 800-171 DOD assessment requirements. Transportation must be traceable, and parcel post is prohibited. Contractors must comply with hazardous material labeling under 29 CFR 1910.1200 and prohibition of hexavalent chromium per 252.223-7008, and adhere to employment equity, anti-trafficking, and eligibility verification clauses. Invoices must be submitted via WAWF. The contractor must represent its size and socioeconomic status, including UEI

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

CHAIN, WELDLESSThis contract specifies the procurement of 90 units of a weldless chain made from corrosion-resistant steel, with a stock thickness of 0.035 inch, measuring 8 inches in length and classified as Type 2 Class 3 Size 35, identified by part number NAS1455C35-8 and NSN 4010-00-142-6300. The chain meets the requirements of NAS1455 Revision 2 dated 09/19/2014 and references RR-C-271H(1) Revision 1 dated 01/03/2022, and is designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards, and include mandatory packaging, marking, and inspection protocols per MIL-STD-129, ASTM D3951, and DLA-specific provisions RP001, RQ011, RQ017, and RQ001. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise specified; inspection and acceptance occur at origin, and item unique identification is not required per the service customer’s request. The chain must be delivered FOB origin within 145 days, with an original required delivery date of September 12, 2026, and a need ship date of September 15, 2026. No quantity variance is permitted; the contract mandates exact compliance with the 90-unit order. Packaging must adhere to DLA requirements, including palletization per RP001 and labeling per MIL-STD-129, with unit of issue as EA. Measuring and test equipment must be calibrated and traceable per RT001. Deliveries are to be shipped to DLA Distribution Jacksonville at the specified address, with transportation governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE4A5-26-T-070W, with a response deadline of July 23, 2026, and is administered by the Department of Defense, ASC Supplier Operations OEM Division, with Hien-Van Trinh as the primary point of contact.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

PIN, QUICK RELEASE

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Lubricant Grease Supply (14.5 oz. Cartridges)Nashville Electric Service is seeking suppliers to provide 240 units of Lubricant Grease #2 in 14.5 oz. cartridges with part number LUBRI L0106-098 under a supply-only subcontract. The contract requires delivery to Nashville, TN, with no associated services, installation, or maintenance included. The solicitation was posted on July 20, 2026, and responses must be submitted by July 27, 2026, at 7:00 PM. The NAICS code for this procurement is 325998, indicating it pertains to other chemical product and preparation manufacturing. The offeror must ensure compliance with all delivery timelines and product specifications, as failure to meet requirements may result in contract rejection. Bids must be submitted through the designated vendor portal at the provided UI link.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Supply of Expendable Aluminum Caps (ABB AUTO 3872A21G01)The contract requires the procurement and delivery of 665 units of expendable aluminum caps with part number ABB AUTO 3872A21G01, specifically for use in electrical utility infrastructure applications. All units must be manufactured by the original equipment manufacturer or supplied through an authorized distributor to ensure compliance with quality and compatibility standards. The solicitation is categorized as a subcontract under NAICS code 332618, indicating a focus on other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with a strict response deadline of July 24, 2026, at 7:00 PM. Performance of the contract is to be carried out in Nashville, Tennessee, with Nashville Electric Service as the procuring entity. The solicitation details and submission portal are accessible via the provided vendor link.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

Supply of 10A Type D Fuse Links (Electrical Components)Nashville Electric Service is seeking the procurement of 1,200 units of 10 AMP Type D Fuse Links under a supply-only subcontract, with no installation or ancillary services required. The contract is open for bids through a solicitation with a response deadline of July 24, 2026, at 7:00 PM, following a posting date of July 20, 2026. The procurement falls under NAICS code 335313, which pertains to the manufacturing of electrical lighting and wiring equipment. All delivered products must meet required specifications and be ready for direct use at the place of performance in Nashville, Tennessee. The contract is administered directly by Nashville Electric Service, and vendors must submit proposals through the official vendor portal linked in the solicitation.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Supply of Conduit Ventilation Cable Supports (TERMINATOR 3 350AT & 500AT 3H)

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Supply of PVC Conduit Elbows (90°, 24" Radius, 2" Diameter)Twenty units of 90-degree PVC conduit elbows with a 24-inch radius and one bell end are being procured for 2-inch Schedule 40 PVC conduit, all required to meet NEMA TC3 standards. The contract is a subcontract under the NAICS code 335931, issued by Nashville Electric Service in Tennessee, with no installation or additional services included. The solicitation was posted on July 20, 2026, and responses must be submitted by July 24, 2026, by 7:00 PM. The place of performance is Nashville, and the procurement is managed through the vendor portal accessible via the provided link.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Supply of CUMMINS LF14002NN Oil Filters (OEM-Compliant)

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

POSTED

DEADLINE

Fuse LinkNashville Electric Service is soliciting a Type D fuse link rated at 10 amps, with approved manufacturers including S&CELEC364010, COOPERFL3D10, INDELBAEF10DIPCIR, under solicitation number Z4828. The opportunity is open to SLED government entities and does not specify a set-aside classification, targeting suppliers who can deliver the exact specifications for this electrical safety component. The solicitation was posted on July 20, 2026, and responses are due by July 24, 2026, at 7:00 PM Eastern Time. Performance of the contract will occur in Nashville, Tennessee, with no specific zip code designated. Primary point of contact for inquiries is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. All submissions must be made through the vendor portal at the provided UI link.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

ConduitThe contract is for a specific conduit fitting: a 90-degree elbow made of PVC thermoplastic with a 24-inch radius, featuring one bell end and designed to accommodate 2-inch diameter schedule 40 PVC conduit with a 2.375-inch outside diameter, meeting NEMA specification TC3. Only approved manufacturers are acceptable, with SEDCO and CAN-TEX identified by their part numbers ALLIED862295 specified as qualified sources, and alternatives labeled as “or equal” may be considered under equivalent performance standards. This is a solicitation issued by Nashville Electric Service under solicitation number Z4825, targeted at state, local, and educational entities, and is open for responses until July 24, 2026, at 7:00 PM Eastern Time. The posting date is July 20, 2026, and the place of performance is in Nashville, Tennessee. Proposals must be submitted through the vendor portal accessible via the provided UI link. Tiffany Caruthers serves as the primary point of contact for procurement inquiries, reachable by phone or email provided in the documentation.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

TerminatorThe contract pertains to the procurement of Terminator 350AT and 500AT 3H conduit ventilating cable support systems designed for 3-inch diameter galvanized conduit, each equipped with a gasket and intended for use with three cables. Two of the cables must not exceed 1.00 inch in diameter, while the third cable is limited to a maximum of 0.85 inch. The approved manufacturer and part number for compliance is PLMCV30-3-1/CFOR1.0"DIACABLE, ensuring compatibility and adherence to technical specifications. This solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting SLED procurement with the response deadline set for July 24, 2026, at 7:00 PM CT. The point of contact for inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593, and all submissions must be made through the vendor portal linked via the solicitation number Z4826. The performance location is in Nashville, Tennessee, and the system must meet all stated dimensional and functional requirements to be eligible for award.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Oil FilterNashville Electric Service is soliciting oil filters compatible with Freightliners from 2022 to present, specifically the Cummins LF14002NN model, with approved part number FLEETLF14002NN. The contract is open for bid under solicitation number Z4821, with responses due by July 27, 2026, at 7:00 PM CT. The solicitation is classified as a state, local, or educational agency procurement under the Tennessee agency designation, and the place of performance is in Nashville, Tennessee. Primary point of contact for procurement inquiries is Alan Martinez, reachable at 615-747-3720 or amartinez@nespower.com. Bidders must submit responses through the official vendor portal at https://vendor.nespower.com/?bid=Z4821.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Cable Copper Building

POSTED

DEADLINE