Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Flat Washers (NSN 5310-01-656-1888)

Active

Federal

Response Deadline09/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Department of Defense ASC Commodities Division involves the supply of 13,000 flat washers meeting NSN 5310-01-656-1888 for prime contractors on DLA Aviation supply contracts. The hardware must be packaged according to MIL-STD-2073-1E and undergo inspection via MIL-STD-1916 or ASQ H1331. The contractor is required to provide full supply chain traceability documentation per DLAD Procurement Notes C03 and maintain compliance with FAR 52.246-11. All 13,000 units must be properly packaged, marked, and delivered to the designated destination point. This opportunity falls under NAICS code 332722 with a response deadline of September 30, 2026.

General Info

Supply 13,000 flat washers for DoD by September 30, 2026, meeting MIL-STD specifications.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-Q-1380.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WASHER, FLAT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 28

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 05:00:00 PM UTCin 18 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 13,000 flat washers for prime contractors on DLA Aviation supply contracts. Provides hardware meeting NSN 5310-01-656-1888, packaged per MIL-STD-2073-1E and inspected via MIL-STD-1916 or ASQ H1331. Requires supply chain traceability documentation per DLAD Procurement Notes #C03 and compliance with FAR 52.246-11. Delivers 13,000 packaged and marked washers to the destination point.

Similar Contracts

Same NAICS industry code

Supply of Hexagon Nuts (NSN 5310-01-652-3825)

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Critical Application Machine Screw Supply

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Plain Hexagon Nuts (NSN 5310-00-282-5658)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305-00-914-6130)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Supply of Critical Safety Machine Bolts

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Supply of Grooved Headless Pins (NSN 5315014178548)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

Socket Head Cap Screw Manufacturer/Supplier

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPEA46-26-T-25NF

Solicitation SPE4A6-26-T-25NF, issued by the DLA Aviation ASC Commodities Division, is a request for quotations for one plain hexagon nut, identified by NSN 5310016308285 and SAE International part number J2295J995C2R08-XG5. The requirement is for a quantity of one unit with a delivery timeline of 10 days after receipt of order, with an original required delivery date of July 22, 2026. The shipment is designated as FOB Origin and will be delivered to the US Army SSA W58MKR in Zaczernie, Poland. Quotations are due by September 9, 2026. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance will occur at the destination per FAR 52.246-2, utilizing sampling methods based on MIL-STD-1916 or ASQ H1331. Offerors must comply with domestic sourcing requirements, including the Buy American Act and the Berry Amendment, and provide representations regarding their size status under NAICS code 332722. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, human trafficking, and telecommunications equipment.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-05Q3

This solicitation from the Department of Defense Land Supply Chain is for the procurement of two access covers, identified by NSN 5340-01-461-0652. The contract requires delivery within 20 days after the order is placed and is subject to full and open competition. It incorporates specific technical and quality requirements from the DLA Master List, including strict packaging standards and the prohibition of Class I ozone depleting chemicals. The agreement includes rigorous security and compliance mandates, specifically requiring adherence to Covered Defense Information and CMMC Level 2 certification. Because the item contains technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training and questionnaires to access the data. All responses must be submitted by September 11, 2026.

LAND SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A0-26-T-4689

This contract, identified as SPE4A0-26-T-4689, is for the procurement of 12 hexagon head cap screws under NSN 5305-01-714-6483. The items must adhere to the basic specification MIL-DTL-1222J and part number M1222RN8F236GHNN. Delivery is required within 5 days, with the original required delivery date set for September 2, 2026. The shipment is destined for the Pearl Harbor Naval Shipyard IMF in Hawaii, with FOB origin terms and inspection and acceptance occurring at the destination. The agreement incorporates strict quality and packaging standards, including DLA packaging requirements RP001 and marking standards per MIL-STD-129. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-defect acceptance policy for sample lots unless otherwise specified. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M0-27-Q-0016

Solicitation SPE7M0-27-Q-0016 is an urgent and compelling emergency requirement issued by DLA Land and Maritime for the procurement of four machine bolts, identified by NSN 5306-01-286-0864. The items must be manufactured in accordance with the current revision of the applicable part standard, specifically ASME B18.2.1 Revision D. This is a firm fixed price acquisition where the government will evaluate quotes based on both price and the fastest possible delivery. The required delivery date is listed as 30 days after order, with the final destination being the Pearl Harbor Naval Shipyard in Hawaii. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards under ASTM D3951 and palletization per RP001. Marking and labeling must comply with MIL-STD-129 and MIL-STD-130N. Quality assurance involves a zero non-conformance acceptance policy, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic preferences, and contractor eligibility. Quotations are due by September 18, 2026, though the government may award the contract prior to this date due to the emergency nature of the buy.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAGON

Solicitation # SPE4A6-26-R-XD63

Solicitation SPE4A6-26-R-XD63 is issued by DLA Aviation for the procurement of 9,000 self-locking hexagon nuts (NSN 5310-99-702-3861). This item is designated as a Commercial Off-the-Shelf (COTS) product and an Air Force Critical Safety Item (CSI), meaning all waivers or deviations must be approved by the DSC contracting officer. The delivery requirement is 560 days after receipt of order, with the shipping destination being DLA Distribution Warner Robins in Georgia. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and technical standards, including SAE AS9100 for manufacturers and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements (RP001). Award decisions will be based on a best-value determination, weighing price and past performance, with a heavy emphasis on SPRS assessments and historical delivery compliance. Additionally, the contract requires compliance with DFARS 252.204-7012 for safeguarding covered defense information and mandates the use of the Wide Area WorkFlow (WAWF) system for all invoicing and payment requests.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supply of Electrical Insulation Tape (NSN 5970009445015)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Military Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 20 hours ago

DEADLINE

Radio Frequency (RF) Detector Supply

Other Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Lock Pins (NSN 5315005970499)

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Self-Locking Hexagon Nuts

Pharmaceutical Preparation Manufacturing

POSTED

about 20 hours ago

DEADLINE

TENSIOMETER, V-BELT

Solicitation # SPE4A6-26-Q-1429

This contract, identified as SPE4A6-26-Q-1429, is a firm fixed price solicitation for the procurement of 24 V-belt tensiometers, specifically Gates Corporation part number 7401-0076. The items are designated as critical application items and must be delivered within 46 days after the order is received. Delivery is set for FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, marking, and the use of measuring and test equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging must comply with ASTM D3951 and MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases approved by NAVSEA.

Other Measuring and Controlling Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

BUSHING, SLEEVE

Solicitation # SPE4A6-26-T-26NV

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 263 sleeve bushings under part number 3120-00-242-8431. The contract requires delivery within 64 days after receipt of order and is associated with solicitation number SPE4A6-26-T-26NV. Performance is to take place at Robins Air Force Base. The agreement is subject to strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific training to access the data. Item Unique Identification is not required for this order.

Ball and Roller Bearing Manufacturing

POSTED

about 20 hours ago

DEADLINE

STUD ASSEMBLY, TURNL

Solicitation # SPE4A6-26-T-26TH

This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 13 turnlock stud assemblies, identified by NSN 5325-00-594-6267. The contract requires a rapid delivery turnaround of 5 days after the order is placed. Performance is centered in Oklahoma City, and the procurement falls under NAICS code 332510. Strict compliance is required regarding cybersecurity and data handling, specifically necessitating CMMC Level 2 certification through a C3PAO and adherence to Covered Defense Information standards. The technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the contractor must follow specific DLA packaging requirements, source approval documentation, and configuration change management protocols for any engineering variances.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

CABLE ASSEMBLY, RADIO F

Solicitation # SPE4A6-26-T-26JY

This contract is for the procurement of one branched radio frequency cable assembly, identified by NSN 5995-01-695-5919 and Lockheed Martin part number 4027AS1810-02. The item is designated as a critical application item and must be delivered to the Marine Aviation Logistics Squadron 11 in San Diego, California, within five days of order. The agreement specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. The supplier must adhere to strict quality and security standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Sampling and inspection will follow MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Shipment must be executed via the fastest traceable means, avoiding parcel post.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS