Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Flow Control Thermostat (NSN 6685014449477)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the procurement and delivery of a single military-specification Flow Control Thermostat identified by NSN 6685014449477, commercial part number RE64354, and CAGE code 75160. The item must fully comply with all Defense Logistics Agency packaging, marking, and shipping standards, ensuring it meets rigorous defense supply chain requirements. Delivery is to be made FOB Origin to a destination in South Korea, placing responsibility for transportation and associated risks on the buyer after the item leaves the supplier’s facility. The contract is classified as a subcontract under the NAICS code 334512, which pertains to electronic component and product manufacturing. It was posted on July 19, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. While no solicitation number or set-aside details are provided, the procurement is tied to a specific DLA award contract reference and is intended to support military operations requiring precise thermal control in demanding environments. The absence of detailed contact or location information suggests this is part of a larger logistics or supply chain execution rather than an open bid process.

General Info

Procurement of military thermostat NSN 6685014449477 for delivery FOB Origin to South Korea under DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement and delivery of one military-specification Flow Control Thermostat (NSN 6685014449477, Part RE64354, CAGE 75160), compliant with DLA packaging, marking, and shipping standards for FOB Origin delivery to South Korea.

Similar Contracts

Same NAICS industry code

THERMOSTAT, FLOW CONTROLThis contract is for the procurement of one thermostat, flow control, identified by NSN 6685-01-339-1227, classified as a commercial off-the-shelf (COTS) item with critical application status, supplied by Oshkosh Defense LLC and Rolls-Royce Solutions America Inc. The contract is structured as an indefinite-delivery contract with a firm-fixed-price basis, allowing orders between 149 and 601 units annually over a five-year period, with an estimated annual demand of 601 units and a maximum contract value of $350,000. Delivery is required within 59 days after the date of order, with FOB destination terms specifying that title and risk transfer upon arrival at the destination, and inspection and acceptance both occur at the point of delivery. Packaging and marking must strictly conform to MIL-STD-2073-1E and MIL-STD-129, with preservation methods coded as 10 and no special marking required; palletization must comply with DLA packaging requirements RP001, and hazardous materials are governed by IP025. A hard-copy DD Form 250 packing list must be included in each shipment, and all shipments must be processed through Wide Area Workflow for invoicing and payment. The contract imposes extensive compliance obligations under Federal Acquisition Regulation clauses covering cybersecurity, supply chain security, socioeconomic sourcing, and environmental and safety standards, including prohibitions on hexavalent chromium, toxic material disposal, foreign-sourced critical minerals, and items from the Xinjiang region. Contractors must maintain active SAM registration, comply with cybersecurity requirements under 252.204-7012, and submit disclosures for covered defense telecommunications equipment or services. The evaluation is based on a trade-off methodology where past performance, particularly historical quality and delivery compliance, is weighed equally with price, meaning technical excellence and reliability are as critical as cost. Offerors must submit proposals via DIBBS or authorized electronic means, with supplemental documentation deadlines for alternate products and traceability records. Additional requirements include adherence to Buy American provisions, duty-free entry conditions, prompt payment terms with electronic funds transfer, and compliance with personal identity verification and antiterrorism training mandates for personnel. All contract clauses incorporate applicable standards by reference, and deviations are explicitly authorized for certain provisions, including sustainable product use and subcontracting rules for commercial items.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

GAGE, PRESSURE, DIALThis contract specifies the procurement of five dial pressure gauges, identified by part number 25-1009-SW-02L-VAC/15PS and NSN 6685017140256, sourced from Ashcroft Inc and Tri-State Technical Sales Corp. The item is designated as a critical application item, requiring strict adherence to technical and quality standards defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers such as RT001 for measuring equipment, RQ009 for inspection and acceptance at origin, RP001 for DLA packaging, and RQ017 for physical identification marking. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor, with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must meet DLA packaging requirements. Delivery is FOB origin with a 158-day lead time to reach the receiving warehouse in Tracy, California, and the contract enforces a strict zero variance in quantity. Documentation for source approval, transportation protocols, and unit of issue alignment with ANSI X12 standards are also mandated, with the required ship date set for January 3, 2027, and original delivery due by March 6, 2027.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

TRAY, STOWAGE, VEHICUThe contract solicitation is for a single unit of a tray for stowage in military vehicles, identified by NSN 2540-01-687-9183, with a delivery requirement of 10 days after delivery order. Full and open competition applies, and no set-aside provisions are in effect. The item is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue or award date. The use of Class I ozone-depleting chemicals is strictly prohibited, regardless of any conflicting specification requirements, and any substitute chemicals must receive prior approval unless explicitly authorized. Export control restrictions apply to technical data associated with the item, governed by ITAR or EAR, requiring prior authorization for any disclosure to foreign persons or entities, including foreign national employees, and DFARS 252.225-7048 is enforceable. Access to this controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. Additionally, the item falls under the defense category for Covered Defense Information, and the contractor must maintain CMMC Level 2 certification as verified by a certified third-party assessment organization. Configuration changes require formal Engineering Change Proposal and variance request processes. The solicitation was issued on July 20, 2026, with responses due by July 23, 2026, under Solicitation Number SPE7L4-26-T-5463. The place of performance is Fort Drum, New York, and the point of contact for inquiries is Anna-Rachelle Betts at the DLA office.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 20 hours ago

DEADLINE

THERMOWELLThe contract pertains to the procurement of one thermowell with part number 390-5340 and NSN 6685-01-338-1911, supplied by Alfa-Laval Inc under solicitation SPE4A5-26-T-297F. The item must be delivered within 20 days to Camp Ripley, Building 17, Little Falls, Minnesota, with delivery terms FOB origin and no quantity variance allowed. Inspection and acceptance occur at the destination. All packaging and labeling must adhere to MIL-STD-129 and DLA packaging requirements, with commercial packaging under ASTM D3951 permitted only if the item is non-hazardous; otherwise, it must comply with TQ requirement IP025 per FED-STD-313. The DLA Master List of Technical and Quality Requirements takes precedence over any other standard. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with verification levels or AQLs as defined. Government identification must be removed from non-accepted supplies, and bare items must be physically marked per RQ017. Documentation requirements for source approval apply, and the item must be shipped via the fastest traceable means, excluding parcel post. The contract references multiple technical provisions and quality control standards, all governed by the most current revision of the DLA Master List as of the solicitation or award date.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

GAGE, PRESSURE, DIALThis contract specifies the procurement of two pressure dial gauges under NSN 6685-01-703-1549, with delivery required within 165 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California. The items must be supplied by authorized manufacturers including Sauer Compressors USA and Ashcroft Inc., and each unit must comply with strict technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements identified by R or I numbers. All components are classified as critical application items and must be inspected and accepted at origin, with mandatory adherence to MIL-STD-1916 or ASQ H1331 sampling methods and zero non-conformances required unless otherwise stipulated. Verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics with corresponding AQLs of 0.1, 1.0, and 4.0, and unspecified attributes default to major. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 marking requirements with no special marking codes applied, and palletization must conform to DLA packaging regulations. Measuring and test equipment used in manufacturing and inspection must be properly calibrated and documented, and source approval documentation must be submitted in accordance with RC001. The contract imposes a strict zero variance in quantity and requires delivery FOB origin, with transportation governed by DLAD procedural notes C19 and C20. The original required ship date is January 10, 2027, and all supplies must be marked with the correct part numbers and revisions as specified.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 20 hours ago

DEADLINE

Humidity Indicator Plug Manufacturing and SupplyThe contract is for the manufacture, packaging, marking, and delivery of 18 units of Humidity Indicator Devices, Plug Type, identified by NSN 6685-00-001-6322 and Part Number 3497, to meet strict military specifications and Defense Logistics Agency requirements. The work must be performed in compliance with all applicable defense standards, ensuring the devices are properly labeled and packaged for military use. The place of performance is specified as New Cumberland, Pennsylvania, with the delivery address tied to this location. This is a subcontract opportunity under the NAICS code 334512, which pertains to navigation, measuring, electromedical, and control instruments manufacturing. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, and is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. Interested parties must submit proposals through the DIBBS system using the provided link to ensure proper consideration, and all deliverables must align with the technical and logistical expectations of the defense supply chain.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Precision Temperature Control Unit ManufacturingThe contract solicits the manufacture of a single precision temperature control unit designed to meet stringent military specifications, including National Stock Number requirements and established quality standards. The work is classified as a subcontract under NAICS code 334512, indicating involvement in the manufacturing of instrumentation and related products for military applications. Performance is required at a specified location in Tracy, California, with the zip code 95304-5000, and the contracting entity is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on July 19, 2026, with a firm response deadline of July 27, 2026, leaving a narrow window for qualified suppliers to submit proposals. This procurement emphasizes technical precision and compliance with defense-grade protocols, ensuring the unit operates reliably under extreme environmental conditions typically encountered in military operations.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

THERMOMETER, SELF-INThe contract concerns the procurement of three units of a thermometer, self-in, with part number 08080-88 and NSN 6685017278975, under solicitation SPE4A5-26-T-294X, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 20 days of award, FOB origin, to Fort Riley, Kansas, with zero variance permitted in quantity and no tolerance for deviation from specifications. The product must comply with stringent packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including the special marking code “05 – Delicate instrument,” and palletization must follow DLA Packaging Requirements for Procurement (RP001). Preservation is specified as cling/dry with no additional preservation or wrap materials, and cushioning is not applicable. Shipment must occur via the fastest traceable means, explicitly prohibiting parcel post, and all packaging must bear compliant GS1-128 or Data Matrix barcodes for traceability. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2 and sampling procedures aligned with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0, respectively, and MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. The contract mandates adherence to cybersecurity and data protection requirements including NIST SP 800-171, safeguarding of covered defense information, and prohibitions on covered telecommunications equipment, all under deviations specified for several clauses. Compliance with small business representation, UEI and CAGE code submission, and SAM.gov registration is required, and invoicing must be submitted electronically through WAWF. Payment terms are fixed-price at $3.00 per unit, totaling $9.00, with no option quantities or extended terms, and all proposals must be submitted via the DIBBS portal by the deadline of July 27, 2026, with no alternative submission methods accepted.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

MOTION DETECTORThe contract specifies the procurement of one motion detector with NSN 6350015767010 and part number BW 15670 001N under solicitation SPE8E8-26-T-4752, issued by the Defense Logistics Agency for the Department of Defense. The item must be delivered within ten days to Eler Field in Pineville, Louisiana, with FOB origin terms and zero variance in quantity. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be marked and labeled per MIL-STD-129. If the item is hazardous per FED-STD-313, it must be packaged according to IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must follow RP001 guidelines and shipments must use the fastest traceable means, excluding parcel post. The contract references stringent packaging, labeling, and marking obligations tied to federal standards and DLA directives, with delivery and acceptance occurring at the destination. The unit of issue is each, with a total price of one dollar and a required delivery date of July 15, 2026. Government-specific identifiers, including RDD 555, project code TP 2, and contact information for Alexis Selby, are included for administrative and logistical purposes.

Defense Logistics Agency

POSTED

DEADLINE

INDICATOE, HUMIDITYThe contract pertains to the procurement of 18 units of Humidity Indicator Devices, Plug Type, identified by NSN 6685-00-001-6322 and product number 3497 from Clariant Corp, under solicitation SPE4A5-26-T-295C, with a total contract value of $324.00 at a fixed unit price of $18.00. Delivery is required within 122 days after award, with a firm delivery date of November 27, 2026, FOB Origin, meaning risk and title transfer to the government upon shipment from the contractor’s facility. All items must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, where both inspection and acceptance will occur. The contractor must comply with DLA’s technical and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, referenced via RA001. Packaging must conform to MIL-STD-2073-1E with a packaging code of U, using a BS unit container and E5 intermediate container, employing preservation method 51 (cleaning and drying, level 1) and no special preservation or wrap materials. Palletization must follow DLA’s RP001 packaging requirements, and marking must adhere strictly to MIL-STD-129 with special marking code 00, indicating no special markings are needed. Physical identification of bare items must comply with RQ017, and removal of government identification from non-accepted supplies is governed by RQ011. Sampling for quality assurance is to follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with zero non-conformances required in any sample lot unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. The contract incorporates a comprehensive suite of FAR and DFARS clauses, including inspection requirements under 52.246-2, safeguarding of covered contractor information systems under 52.240-93 and 252.240-7997, cybersecurity protections under 252.204-7012, prohibition of hexavalent chromium and

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CONTROL, TEMPERATUREThis contract, issued under solicitation SPE4A5-26-T-295H, pertains to the procurement of one unit of a temperature control item with NSN 6685-01-505-6571 and part number 4439-90003 from Chromalox, Inc., designated as a critical application item. Delivery is required FOB origin within 276 days of award, with no variance allowed in quantity, and inspection and acceptance are to occur at the origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container codes, while marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA’s packaging requirements, and the delivery address is the DLA Distribution San Joaquin warehouse in Tracy, California. Sampling and quality verification are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, critical attributes are assigned verification level VII or an AQL of 0.1, major attributes level IV or 1.0, and minor level II or 4.0; unspecified attributes default to major. Documentation for source approval, physical identification of the item, and removal of government identification from non-accepted supplies are all governed by referenced DLA technical and quality requirements listed in the DLA Master List. The contract specifies the unit of issue and requires adherence to DLA transportation and freight procedures, with a required ship date of April 30, 2027, despite the original delivery deadline of October 14, 2026. The solicitation was posted on July 19, 2026, with a response deadline of July 27, 2026, under NAICS code 334512, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division with primary point of contact Jalon Lynch.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Flow Control Thermostat (OEM or Distributor)The contract requires the supply and delivery of a single flow control thermostat identified by NSN 6685014449477 and manufacturer part number RE64354, must meet all original equipment manufacturer specifications to ensure full compatibility and performance. The item is to be shipped FOB origin from Breckenridge, Minnesota, with a firm delivery deadline of July 31, 2026. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, with the North American Industry Classification System code 334512 indicating the industrial category for instrumentation and related manufacturing. The contract was posted on July 17, 2026, and the place of performance is not specified beyond the origin point, leaving the recipient responsible for transportation logistics from the shipment point. The agreement does not indicate any set-aside provisions or special certification requirements beyond adherence to OEM standards.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Epinephrine Injection (NSN: 6505015273957)The contract mandates the manufacture, packaging, labeling, and delivery of FDA-approved Epinephrine Injection meeting all current Good Manufacturing Practices and Defense Logistics Agency specifications, with the final product destined for a U.S. Navy vessel under FOB Destination terms. The product is identifiable by National Stock Number 6505015273957 and falls under the NAICS code 283410, indicating its classification within pharmaceutical manufacturing. All activities must adhere strictly to regulatory and military standards to ensure safety, potency, and compliance throughout the supply chain. The agreement is structured as a subcontract managed under the Department of Defense through the Defense Logistics Agency, with the work scheduled to be performed in alignment with federal procurement timelines and delivery protocols. The contract was posted on July 20, 2026, and the delivery endpoint is a U.S. Navy vessel, requiring precise logistical coordination and documentation to meet military operational needs. The product must be fully compliant with both FDA and DLA requirements, including proper labeling, traceability, and packaging suitable for military transport and storage conditions.

POSTED

about 20 hours ago

DEADLINE

Wiper Ring Supply – Precision Sealing ComponentThe contract entails the supply of 17 precision-engineered wiper rings, identified by Part Number 351-44900-330A and National Stock Number 5330-01-284-1598, manufactured to meet specific military standards for performance and reliability. Each unit must comply with all relevant technical and quality requirements, including proper packaging and labeling as dictated by defense regulations. Delivery must be completed in full accordance with established logistical protocols to ensure operational readiness and traceability. The contract is structured as a subcontract under the authority of the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 332996, indicating its focus on other fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, and performance is expected to align with DLA’s supply chain directives, though the specific delivery location and point of contact are not detailed. Access to official contract records is available through the DIBBS portal using the provided reference number.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information handled by the contractor. This includes establishing and sustaining a compliant security posture across systems and networks that process, store, or transmit sensitive defense data, ensuring that all required controls are properly configured, monitored, and documented. The contractor must also be prepared to support timely and accurate cyber incident reporting in accordance with federal requirements, enabling rapid response and coordination with defense authorities when security breaches or anomalies occur. This subcontract falls under the NAICS code 541512 for computer systems design services and is issued by the Defense Logistics Agency under the Department of Defense. The work is focused on sustaining compliance with stringent federal cybersecurity standards, and while no specific location is listed for performance, the obligations apply wherever covered defense information is accessed or managed. The contract underscores a critical requirement for continuous adherence to NIST controls and active participation in the defense cyber incident response framework, making cybersecurity expertise and operational readiness key to successful contract execution.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

Hazardous Materials Compliance & DocumentationThe contract requires strict adherence to OSHA Hazard Communication standards and DFARS 252.223-7001 for all hazardous materials linked to connectors, ensuring proper labeling and accurate safety data sheet generation to meet federal regulatory requirements. All documentation must align with current guidelines to facilitate safe handling, storage, and disposal of chemical substances used in the procurement and integration of these components. This subcontract, issued under NAICS code 541620 by the Defense Logistics Agency within the Department of Defense, mandates compliance as a non-negotiable condition of performance. While specifics on location or point of contact are not provided, the obligation extends to all stages involving hazardous materials associated with connectors, and failure to deliver compliant labeling and SDS documentation could result in contract non-compliance. The posting date indicates this requirement is active for future performance beginning in 2026.

Environmental Consulting Services

POSTED

about 20 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of zero-defect quality inspections using either MIL-STD-1916 or ASQ H1331 sampling methods to verify that all delivered products meet the stringent acceptance standards of the Defense Logistics Agency. These inspections are critical to ensuring full conformance and are conducted to support DLA’s mission of reliably supplying defense systems and materiel with no tolerance for nonconformities. The work is classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services sector, specifically in the realm of quality assurance and inspection. The contract is structured as a subcontract and is tied directly to DLA operations under the Department of Defense, with performance expected to align precisely with federal quality benchmarks without deviation. All activities must be executed to guarantee that every unit received by DLA is fully compliant, with no room for defective or nonconforming product acceptance.

Engineering Services

POSTED

about 20 hours ago

DEADLINE

Packaging and Marking of Military-Grade ComponentsThe contract requires the provision of packaging and marking services for electrical connectors in strict compliance with MIL-STD-2073-1E for packaging standards and MIL-STD-129 for item marking, all in support of the Defense Logistics Agency. The components are destined for military use under the Department of Defense and must meet exacting federal specifications to ensure durability, traceability, and logistical compatibility across the defense supply chain. The work is structured as a subcontract under NAICS code 423840, which pertains to wholesale trade of electronic components and equipment, indicating the scope is focused on preparation and shipment readiness rather than manufacturing. Performance is expected to align with DLA’s standards for federal supply systems, though no specific location for performance or point of contact is listed. The solicitation is posted under contract SPE7M126V050N and was published on July 20, 2026, with no set-aside provisions indicated, meaning it is open to all qualified subcontractors. Full adherence to military standards is critical, as non-compliance could result in rejection of shipments, delays in delivery, or financial penalties. All packaging must preserve the integrity of the connectors during transport and storage, while marking must include universally recognized DOD identifiers, barcodes, and data matrix codes to enable automated receipt and inventory management at military depots worldwide.

Industrial Supplies Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

Supply of Electrical Plug Connectors (MS3406D40-56P / NSN 5935011427787)The contract entails the manufacture and supply of 43 military-spec electrical plug connectors specified as MS3406D40-56P with the NSN 5935011427787, all of which must fully comply with applicable MIL standards to ensure reliability and interoperability in defense systems. The item is critical for military applications requiring high-performance electrical connections under demanding environmental and operational conditions. This is a subcontract issued under the authority of the Defense Logistics Agency within the Department of Defense, with a posting date of July 20, 2026, indicating it is part of a broader procurement effort managed through the DLA’s contracting system. The NAICS code 334417 confirms the scope falls within the aerospace and electronic component manufacturing sector. Performance location and specific delivery details are not yet defined, and no set-aside provisions are indicated, meaning the contract is open to all eligible contractors. The sole point of reference for award and tracking purposes is the DIBBS system under contract number SPE7M126V050N.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

Domestic Freight and Delivery to DLA DepotTwo reconditioned circuit card assemblies must be transported from the rework facility to the DLA Distribution Depot in Tracy, California, with delivery required no later than August 19, 2026. The shipment is governed by FOB Origin terms, meaning the buyer assumes all risk and responsibility for the goods once they leave the rework facility. The contract falls under NAICS code 484220, indicating it is a domestic freight transportation service, and is classified as a subcontract within the Department of Defense framework. The Defense Logistics Agency is the contracting organization, and the work is being performed under solicitation SPE4A626PX555, with the opportunity posted on July 20, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 20 hours ago

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires the compilation and verification of detailed documentation to establish the prior government ownership and reconditioning history of surplus electronic items, ensuring full compliance with federal requirements prior to submission. This work is critical for maintaining the integrity and traceability of the defense supply chain, as accurate records are necessary to confirm legal and regulatory adherence throughout the lifecycle of the equipment. The contractor must rigorously authenticate provenance and reconditioning data to support transparency and accountability in the disposition process. This subcontract is part of a larger effort managed by the Defense Logistics Agency under the Department of Defense, aligning with NAICS code 541611 for management consulting services. The project involves meticulous record gathering, validation, and formatting to meet stringent government standards, with no specific location specified for performance. The solicitation was posted in July 2026 and is tied to contract SPE4A626PX555, indicating its role within an established procurement pathway for supporting defense logistics operations.

Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

Inspection, Packaging, and Marking of Reconditioned ElectronicsThe contract pertains to the final inspection, preservation, packaging, and labeling of reconditioned circuit card assemblies to ensure full compliance with military packaging and marking standards. This effort is critical to maintaining the integrity, functionality, and traceability of electronic components used in defense systems, requiring strict adherence to established federal and military specifications throughout every phase of handling. The work involves detailed quality control procedures to verify that each assembly meets performance criteria prior to being preserved against environmental degradation, securely packaged, and accurately labeled in accordance with mandated military protocols. This subcontract is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 493190 for other warehousing and storage. The solicitation was posted on July 20, 2026, and the place of performance is not specified, suggesting the work may be conducted at any approved contractor facility capable of meeting the rigorous defense standards. The contract's purpose is to support the sustainment and readiness of military electronics by ensuring that reconditioned components are handled, stored, and shipped with the same precision and reliability as new units, thereby reinforcing the logistical backbone of defense operations.

Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

Reconditioning of Government Surplus Circuit Card AssembliesThe contract entails the reconditioning of government surplus circuit card assemblies to restore them to original technical specifications and military standards for reuse. This involves the systematic replacement of expired or degraded components, thorough functional testing to ensure operational integrity, and adherence to all applicable military performance and reliability requirements. The work must be performed with precision to guarantee that the returned assemblies meet the identical functional and environmental criteria as newly manufactured units, ensuring they are fully viable for military systems and platforms. This subcontract is issued under the Defense Logistics Agency within the Department of Defense and falls under NAICS code 334418 for electronic component and product manufacturing. The solicitation was posted on July 20, 2026, and the performance location and point of contact details are not specified, though the work is tied to DLA’s broader initiative to extend the life cycle of critical electronic assets. The contractor is expected to deliver reconditioned assemblies that are fully compliant, documented, and ready for immediate integration into defense systems without the need for additional modification or qualification.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Cybersecurity Compliance (CMMC Level 2)The contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information, ensuring alignment with the Defense Federal Acquisition Regulation Supplement (DFARS) 252.204-7012. This includes establishing robust cyber incident reporting procedures to meet federal requirements for timely disclosure of security breaches involving sensitive defense data. The work must support compliance at the Cybersecurity Maturity Model Certification Level 2 standard, which demands a structured approach to cybersecurity readiness, documentation, and continuous monitoring across the organization’s information systems. The effort is classified as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code for computer systems design and related services. Performance is expected to be carried out in support of federal defense operations, with no geographic restrictions specified.

Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE