Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Ground Return Electrical Contact Brushes

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture or sourcing of 18 ground return electrical contact brushes for prime contractors supporting DLA supply contracts. The required items must strictly adhere to NSN 5977-00-857-2932 and Part Number 11714. Performance of the contract takes place at Hill AFB, and the supplier must ensure full compliance with the Buy American Act. Quality assurance is a critical component of the agreement, requiring sampling performed according to MIL-STD-1916 or ASQ H1331. Additionally, all items must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division.

General Info

Supply 18 electrical contact brushes for Hill AFB per NSN 5977-00-857-2932 specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

335991 - Carbon and Graphite Product Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1759.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRUSH, ELECTRICAL CONTA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies ground return electrical contact brushes for prime contractors delivering DLA supply contracts. Manufactures or sources brushes meeting NSN 5977-00-857-2932 and Part Number 11714. Performs quality sampling per MIL-STD-1916 or ASQ H1331 and packages items per MIL-STD-2073-1E and MIL-STD-129. Requires compliance with the Buy American Act. Delivers 18 units of Brush, Electrical Contact.

Similar Contracts

Same NAICS industry code

National Carbon Grade N3 Material SupplierThis subcontract opportunity is for the supply of raw National Carbon Grade N3 material to support prime contractors fulfilling DLA supply contracts. The selected supplier is responsible for sourcing and delivering raw carbon or graphite stock that strictly adheres to the specified grade, as no substitutions are permitted. All deliveries must include material certifications to ensure exact compliance with technical requirements. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place in Tracy, California. Compliance with the Buy American Act and DFARS 252.225-7001 is mandatory. Interested parties must submit their responses by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Electrical Contact Brush ManufacturerThis subcontract involves the manufacture of 24,000 electrical contact brushes for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be fabricated to National Carbon Grade N3 specifications and Part Number 73Q10D2, specifically for NSN 5977-01-07-82358. Production requires the use of precision machining equipment and strict adherence to MIL-STD-1916 or ASQ H1331 zero non-conformance sampling standards. The contract mandates full compliance with the Buy American Act and DFARS 252.225-7001. Performance will take place in Tracy, California, under NAICS code 335991. Interested parties must respond by October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Electrical Power Cable Assembly Manufacturing/SupplyThis subcontract involves the manufacture and supply of seven electrical power cable assemblies for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for sourcing or producing the assemblies according to NSN 6150-01-668-8384, ensuring all items undergo physical identification and bare item marking per RQ017. Additionally, the provider must supply Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and adhere to ASTM D3951 and MIL-STD-129 packaging standards. The deliverables are to be shipped FOB Origin to DLA Distribution DSP New Cumberland. This requirement falls under NAICS code 335991 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

HOLDER, ELECTRICAL C

Solicitation # SPE4A6-26-T-12RG

Solicitation SPE4A6-26-T-12RG is a fixed-price request for the procurement of 43 electrical contact brush holders, identified by NSN 5977-01-330-5984. The contract is issued by the DLA Aviation ASC Commodities Division and is not a small business set-aside. Delivery is required within 38 days after receipt of order, with a required delivery date of December 27, 2026, shipped FOB Origin to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the destination. Eligibility for award requires offerors to possess an approved US/Canada Joint Certification Program certification and approval from the DLA controlling authority due to export-controlled technical data subject to ITAR or EAR regulations. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirement RP001. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and cybersecurity standards, including CMMC Level 2 and DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

HOLDER, ELECTRICAL C

Solicitation # SPE4A6-26-T-09UP

Solicitation SPE4A6-26-T-09UP is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 19 electrical contact brush holders, identified by NSN 5977-01-330-5984. The items must be manufactured according to specific technical data packages and reference drawings, including basic drawing 53711 7053083 Revision C. Delivery is required within 141 days after order, with a need ship date of March 15, 2026, and a final required delivery date of May 7, 2026. The place of performance and delivery is Tracy, California, with shipping terms established as FOB Origin. Inspection and acceptance will occur at the destination. This is an unrestricted solicitation and not a small business set-aside, although a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Due to the nature of the technical data, the procurement is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation requires compliance with CMMC Level 2 cybersecurity standards and the Buy American Act. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supplier of Electrical Contact Carbon Stock (NSN 5977015683488)This subcontract involves the procurement of 42 units of specialized carbon stock for electrical contact brushes to support the DLA Weapons Support ASC Commodities Division. The selected supplier is responsible for manufacturing or sourcing materials that strictly adhere to NSN 5977015683488 specifications. All deliverables must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract mandates strict adherence to the Buy American Act and the Berry Amendment, and it explicitly prohibits the use of additive manufacturing. Interested parties must submit their responses by November 6, 2026, for this Department of Defense requirement categorized under NAICS code 335991.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

59--CARBON STOCK,ELECTRICA

Solicitation # SPE4A6-27-U-0143

Solicitation SPE4A6-27-U-0143 is a request for quote for the procurement of electrical contact carbon stock, identified by NSN 5977015683488. The Department of Defense, through the DLA Weapons Support ASC Commodities Division, is seeking a quantity of 42 units with a delivery timeline of 64 days. This procurement may result in an Automated Indefinite Delivery Contract with a term of one year or until the aggregate total of orders reaches 350,000.00. The contract includes a guaranteed minimum quantity of 4 units and an estimated two orders per year. Shipping is designated as FOB Origin, with delivery to various CONUS and OCONUS DLA depots. The contract is not a small business set-aside and falls under NAICS code 335991. All quotes must be submitted electronically via the DLA Internet Bid Board System. Key requirements include compliance with the Buy American Act and the Berry Amendment, with specific domestic sourcing disclosures required for non-domestic materials. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and any hazardous materials must be labeled per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Payment processing is managed through the Wide Area WorkFlow system. Offers utilizing additive manufacturing are ineligible for award.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

POWDERED ACTIVATED CARBON

Solicitation # 271R905236

Solicitation 271R905236 is an invitation for bids issued by the City of Cincinnati for the procurement of Powdered Activated Carbon to be used by the Greater Cincinnati Water Works for the removal of taste and odor producing substances from public water supplies. The contract covers an initial twelve-month period from February 1, 2027, through January 31, 2028, with options for two additional twelve-month renewals ending January 31, 2029. Material is ordered on an as-needed basis and must be delivered FOB-Destination to the Richard Miller Treatment Plant in approximately 20-ton shipments using contractor-furnished air-slide unloading hopper tractor trailers. Bidders must submit an online bid by October 29, 2026, including a one-pound sample in an airtight container, an Excel pricing sheet, and a consolidated PDF of required forms, including Certifications of Compliance from both the bidder and manufacturer. The product must adhere to AWWA Standard No. B 600, with specific requirements for fineness, a minimum iodine value of 500 mg/g, and a maximum moisture content of 8%. Award will be granted to the lowest and best responsive bidder, with evaluation factors including sample testing for organic compound removal, delivery time, and cost-effectiveness. The City reserves the right to apply unit price discounts for delivered products that fall below 90% of the original bid's tested iodine value.

POSTED

DEADLINE

KIT, POWER BRUSH BLO

Solicitation # SPE4A6-27-T-5618

This fixed-price solicitation, issued by the DLA Weapons Support ASC Commodities Division on October 21, 2026, is for the procurement of eight Power Brush Block Kits under NSN 5977-01-092-3990. The requirement specifies part number 44658 from Moog Inc. or Electro-Tec Corp. Delivery is required within 159 days after the order date, with a need ship date of April 6, 2027, and an original required delivery date of November 22, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and RP001 for palletization. Quality assurance requires the manufacturer's system to comply with ISO 9001:2015, with sampling conducted per MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with the Buy American Act and the Berry Amendment. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses regarding hazardous materials, cybersecurity, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Scoreboard System Manufacturing & SupplyThis subcontract for the Department of Transportation Maritime Administration involves the manufacturing and supply of complete scoreboard systems for prime contractors on USMMA projects in Kings Point. The scope of work includes the production of scoreboard display systems, control consoles, and all necessary electronic components and hardware. The supplier is required to provide detailed country of origin information for all major components and ensure that all products adhere to FAR 23.103 sustainability standards. A critical requirement of the agreement is a minimum five-year manufacturer warranty protecting against defects in materials. The contract falls under NAICS code 335991 and was posted on October 16, 2026, with a response deadline of October 23, 2026.

6923G2 DOT Maritime Administration

POSTED

DEADLINE

in about 3 hours

High-Grade Carbon/Graphite Material SupplierThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Operator OEM Division, seeks a supplier for high-grade raw carbon or graphite composite materials. The materials are required in the form of rods, blocks, or sheets to support prime contractors in the manufacture of Honeywell part number 2043924-1 electrical contact brushes. All supplied stock must adhere to exact OEM grade specifications and be accompanied by Material Test Reports or Certificates of Conformance to verify compliance. The performance of this contract takes place at Hill AFB. Interested parties must respond by October 23, 2026, regarding this requirement categorized under NAICS code 335991. The selected supplier will be responsible for delivering the verified raw material stock directly to the manufacturer.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

in about 6 hours

Supply of Non-Rechargeable Lithium Thionyl Chloride BatteriesThis subcontract, issued by the Department of Defense for DLA Distribution San Joaquin, involves the procurement and delivery of 42 non-rechargeable Lithium Thionyl Chloride batteries. The required items are identified as NSN 6135-01-687-6308, Part Number 147-E5542-00, and must be sourced specifically from L3 Aviation Products Inc. The batteries are required to have a 60-month shelf life and must be delivered to Tracy, California. The contract is designated as a Total Small Business Set-Aside under NAICS code 335991. Compliance requirements include adherence to the Buy American Act and ISO 9001:2015 standards. Additionally, the contractor must perform quality sampling in accordance with MIL-STD-1916 or ASQ H1331 to ensure all units meet the necessary specifications.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Electrical Resistance Temperature TransmittersThis subcontract involves the procurement and delivery of 23 Electrical Resistance Temperature Transmitters, identified by NSN 6685151802417, to support prime contractors fulfilling DLA supply contracts. The agreement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, falling under NAICS code 423610. The contractor is responsible for ensuring all hardware complies with MIL-STD-129 standards for marking for shipment and storage. All units must be shipped via freight to the DLA DIST San Joaquin warehouse located in Tracy, California. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking for Electronic ComponentsThis subcontract involves providing specialized preservation, packaging, and marking services for electronic components to support prime contractors on DLA Weapons Support projects. The scope of work requires the processing of 11 units of switches, ensuring all deliverables are prepared for government shipment. All activities must strictly adhere to military specifications, specifically utilizing MIL-DTL-28786 for preservation and materials, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking and equipment standards. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located at Robins Air Force Base. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-01-333-6531)This subcontract involves the supply of 11 toggle switches, identified by NSN 5930-01-333-6531, for prime contractors supporting DLA Weapons Support projects. The contractor is responsible for manufacturing or sourcing Boeing part numbers DAA3272A015 through DAA3272A017, ensuring all units meet Critical Application Item quality standards and adhere to Buy American Act domestic material restrictions. The agreement requires strict compliance with FAR and DFARS cybersecurity clauses to maintain security standards. Performance for this contract will take place at Robins Air Force Base, under the oversight of the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacturing and Supply of Metal Tube Assemblies (P/N 212-076-228-1)This subcontract involves the manufacturing and supply of 13 metal tube assemblies, specifically part number 212-076-228-1, for prime contractors supporting DLA aerospace projects. These components are designated as Critical Application Items and must be produced using precision bending and welding equipment. Performance will take place in Cherry Point, and the final delivery must consist of 13 certified assemblies. The contractor must adhere to strict quality and regulatory standards, including ISO 9001:2015, CMMC Level 2, and DFARS 252.204-7012. Technical requirements include maintaining supply chain traceability according to DLAD C03, following ASTM D3951 for packaging, and ensuring all marking complies with MIL-STD-129. This effort is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacture and Supply of Retaining Ring Tools (NSN 4920-01-633-8742)This subcontract involves the manufacture and supply of 15 retaining ring tools meeting NSN 4920-01-633-8742 specifications for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for ensuring all units are mercury-free per IP056 and undergo quality assurance testing according to MIL-STD-1916 or ASQ H1331. Final products must be packaged in accordance with MIL-STD-2073-1E and delivered to DLA Distribution DDSP in New Cumberland, Pennsylvania. Administrative requirements for this engagement include a mandatory CMMC Level 2 self-assessment. The project falls under NAICS code 333249, with a response deadline set for October 30, 2026.

Other Industrial Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Aerospace Packaging ServicesThis subcontract for MIL-SPEC Aerospace Packaging Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires sealing aircraft components in medium-duty, waterproof, greaseproof, and opaque bags in strict accordance with MIL-DTL-117, Type II, Class C, Style 1. Additionally, the contractor must execute all marking, labeling, and general preparation according to MIL-STD-129 and MIL-STD-2073-1E standards, while maintaining a thorough knowledge of DLA RP001 requirements. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All completed and packaged seals must be delivered ready for shipment to the DDSP in New Cumberland, Pennsylvania. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

Aircraft Seal Fabrication (NSN 5330-01-566-3414)This subcontract involves the fabrication of two high-precision aircraft seals for the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division. The manufacturer must produce the seals according to Boeing PN 901-330-210-135 and TDP Rev A Gen 5 specifications, with a strict requirement that no hexavalent chromium be used during the process. Quality control must be conducted following MIL-STD-1916 zero-based sampling plans to ensure adherence to rigorous aerospace standards. To be eligible, the contractor must hold ISO 9001:2015 or SAE AS9003 certification and maintain CMMC Level 2 compliance. The work is associated with NAICS code 3399991 and will be performed in New Cumberland. Interested parties must respond by October 30, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Energy Chain Links (NSN 4010992126988)This subcontract involves the supply of seven energy chain links, identified by NSN 4010992126988, to support prime contractors fulfilling DLA supply contracts. The items must be delivered to a designated government location in Sault Sainte Marie and shipped using the fastest traceable means available. All products must be packaged according to ASTM D3951 standards to ensure proper handling and transport. The agreement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division. A critical compliance requirement stipulates that the items cannot be produced using additive manufacturing techniques unless prior approval is granted by the ESA. The contract falls under NAICS code 423830 and requires adherence to all specified government delivery and quality protocols.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging, marking, and palletization of 24 individually packaged gages. All activities must adhere to strict military standards, specifically MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 for palletization. Special Marking Code 05 is required for delicate instruments, and the contractor must utilize MIL-SPEC approved cushioning and mercury-free preservation methods. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 30, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 18 hours ago

DEADLINE

Manufacturer of Dial Indicating Compound Pressure-Vacuum GagesThis subcontract involves the manufacture and supply of 24 dial indicating compound pressure-vacuum gages for prime contractors supporting DLA Weapons Support ASC projects. The gages must be produced in accordance with MIL-G-18997E(2) Revision E and meet the specifications for NSN 6685014727061. The selected provider is responsible for performing First Article Testing and submitting the resulting reports to the Naval Surface Warfare Center Philadelphia Division. To qualify, the manufacturer must maintain a quality management system compliant with SAE AS9003 or ISO 9001 and adhere to DFARS 252.204-7012 regulations. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance taking place in New Cumberland. Final deliverables include the 24 finished gages and all required testing documentation.

Irradiation Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves specialized cleaning, preservation, and packaging services for prime contractors. The scope of work requires the cleaning and drying of components, the application of Mat 49 preservative, and the use of heat-sealed barrier bags. All wrapping and cushioning must adhere to MIL-STD-2073-1E and RP001 standards, with marking conducted according to MIL-STD-129. The final deliverable consists of 27 individually packaged and marked spur gears prepared for FOB Origin shipment. Performance of these services will take place at Tinker AFB. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 561910.

Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

Precision Spur Gear Fabrication (NSN 3020-01-247-2214)This subcontract involves the fabrication of 27 high-precision spur gears, specifically Hamilton Sundstrand part number 731829 under NSN 3020-01-247-2214, to support DLA Weapons Support ASC contracts. The scope of work requires the use of CNC gear hobbing and shaping equipment to perform precision machining and grinding. Performance will take place at Tinker AFB. Compliance requirements for this project include a CMMC Level 2 Self-Assessment and adherence to RQ001 and either MIL-STD-1916 or ASQ H1331 sampling standards. The contract is categorized under NAICS code 333613 and is managed by the Department of Defense.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS