Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Headless Shoulder Pins (P/N 69529A5)

Active

Federal

Response Deadline10/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the precision manufacture and supply of eight headless shoulder pins, specifically part number 69529A5 from Hamilton Sundstrand Corporation, for the Department of Defense via the ASC Supplier Oper OEM Division. The items are designated under NSN 5315001852033 and must be produced to critical application item tolerances using precision machining equipment. Performance will take place at Tinker AFB. The contractor must ensure strict adherence to marking and packaging standards per MIL-STD-129, MIL-STD-2073-1E, and RP001. Additionally, compliance with 29 CFR 1910.1200 is required. The procurement falls under NAICS code 332510, with a response deadline set for October 6, 2026.

General Info

Manufacture eight headless shoulder pins for Department of Defense delivery at Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-479Z.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN, SHOULDER, HEADLESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies precision-manufactured headless shoulder pins for prime contractors delivering DLA supply contracts. Manufactures part number Hamilton Sundstrand Corporation 73030 P/N 69529A5 to critical application item tolerances. Performs marking per MIL-STD-129 and packaging per MIL-STD-2073-1E and RP001. Requires precision machining equipment and compliance with 29 CFR 1910.1200. Delivers 8 units of NSN 5315001852033.

Similar Contracts

Same NAICS industry code

Manufacture of Critical Safety Item (CSI) Grooved Clamp CouplingsThis subcontract involves the manufacture of 142 high-precision grooved clamp couplings, identified as NSN 5340017250509, for prime contractors supporting Navy and DLA projects. The components are classified as Critical Safety Items and must be fabricated from 303 CRES stainless steel in accordance with ASTM A582, AMS 5638, or AMS 5640, ensuring qualification to MIL-C-22263 and AS1650 standards. To be eligible, the manufacturer must hold SAE AS9100 certification and obtain Engineering Source Approval from the Government Design Control Activity. Additionally, the provider must maintain compliance with DFARS 252.204-7012. The project is managed under the Department of Defense Land Supply Chain, with performance taking place in New Cumberland, Pennsylvania.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Packing Retainers

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 10 hours ago

DEADLINE

Spherical Plain Bearing SupplierThis subcontract through the Department of Defense ASC Commodities Division requires a supplier to manufacture or source specialized spherical plain bearings for prime contractors on DLA supply contracts. The bearings must strictly adhere to TDP Rev A Gen 3 and NSN 3120016851671, with quality control and packaging performed according to MIL-STD-2073-1E and MIL-STD-129. Performance will take place in Texarkana, Texas. Eligible providers must hold ISO 9001 or SAE AS9003 certification and demonstrate the capability to handle Covered Defense Information. The response deadline for this opportunity is October 6, 2026, under NAICS code 332510.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Grooved Headless Pins (NSN 5315015268791)

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Helical Compression Spring (NSN 5360014652550)This subcontract, issued by the Department of Defense Land Supply Chain, requires the manufacture or sourcing of one precision helical compression spring, identified as Part Number 8-4223 from Aerocontrolex Group, Inc. The item is designated as a Critical Application Item and must be packaged according to ASTM D3951 standards for delivery to prime contractors fulfilling DLA supply contracts. The procurement falls under NAICS code 332510 and is associated with NSN 5360014652550. Performance for this contract is located in Jacksonville, Florida, with a response deadline of October 9, 2026.

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Ball and Roller Bearing SupplierThis subcontract with the Department of Defense ASC Commodities Division involves the supply of 25 high-precision ball and roller bearings for prime contractors on DLA supply contracts. The performance of this contract takes place in Corpus Christi, Texas, under NAICS code 332510. The supplier is required to manufacture or source bearings that strictly comply with DFARS 252.225-7016 domestic content requirements, ensuring that components from the US, Canada, or outlying areas exceed 50 percent of the total cost. To maintain compliance, the contractor must provide a signed declaration regarding the origin of all materials along with the required origin certifications upon delivery.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Headless Straight Rods (P/N 2284168)

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Manufacturing of Straight Headless Pins (NSN 5315-01-078-3630)This subcontract involves the manufacturing of precision-machined straight headless pins under NSN 5315-01-078-3630 for the Department of Defense ASC Commodities Division. The contractor is responsible for fabricating components according to Technical Drawing TDP Rev A Gen 1 and Part Piece Number 5166182-1, utilizing CNC lathes and grinders to ensure all parts meet DLA Master List quality requirements. Final deliverables must be certified and packaged in accordance with RP001 DLA Packaging Requirements. The opportunity is categorized under NAICS code 332510, with a response deadline of October 6, 2026.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

BRACKET, DOUBLE ANGLE

Solicitation # SPE7L1-26-T-18H9

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

PIN, SHOULDER, HEADLESS

Solicitation # SPE4A5-26-T-479Z

Solicitation SPE4A5-26-T-479Z is a request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of eight headless shoulder pins. The items are identified as critical application items under NSN 5315001852033 and part number 69529A5 from Hamilton Sundstrand Corporation. The required delivery date is October 8, 2028, with shipping terms set as FOB Origin and the final destination being the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and compliance standards, including sampling per MIL-STD-1916 or ASQ H1331 and marking in accordance with MIL-STD-129. Inspection and acceptance will occur at the destination per FAR 52.246-2. Key regulatory requirements include the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and the use of the Wide Area WorkFlow system for electronic invoicing. All quotes must be submitted via the DIBBS portal by October 6, 2026, and must not utilize additive manufacturing processes unless specifically authorized.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-18L6

LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-798V

Solicitation SPE4A7-26-T-798V is a Request for Quotations issued by the DLA Aviation ASC Supplier Oper AE and AF Div for the procurement of 99 sleeve spacers, identified by NSN 5365010782608. This requirement is for a Foreign Military Sales order destined for CFAD Bedford in Canada, with an original required delivery date of September 30, 2026, and a delivery window of 20 days after receipt of order. The items must be manufactured in accordance with Basic Drawing NR 53711 5166086 Revision C and comply with specific technical and quality requirements from the DLA Master List. The contract specifies that inspection and acceptance will occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with specific requirements for bare item marking under RQ017. Offerors must submit quotes via the DIBBS portal by October 6, 2026. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. A price evaluation preference is available for certified HUBZone Small Business Concerns, and all payment requests must be processed through the Wide Area WorkFlow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Aircraft Maintenance Fixtures (NSN 4920016898622)This subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the manufacture and supply of two aircraft maintenance fixtures under NSN 4920016898622. The contractor is responsible for sourcing or producing the fixtures according to specific technical requirements, ensuring all items are marked per MIL-STD-129 and compliant with the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 333249 and is designated for performance at Travis AFB. Interested parties must adhere to the response deadline of October 6, 2026, to provide the completed fixtures for prime contractors delivering DLA Aviation supply contracts.

Other Industrial Machinery Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Seals (NSN 5330-01-209-9630)

Fabric Coating Mills

POSTED

about 10 hours ago

DEADLINE

Aircraft Hardware Component Supply

POSTED

about 10 hours ago

DEADLINE

Military-Spec Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 10 hours ago

DEADLINE

Aircraft Maintenance Kit Manufacturing

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Aerospace Finishing and Coating ServicesThe Aerospace Finishing and Coating Services subcontract, issued by the Department of Defense ASC Supplier Oper OEM Division, involves providing specialized surface treatments for stator components on DLA supply contracts. The scope of work includes the application of thermal spray, anodizing, chemical milling, and plasma spraying to ensure critical heat and corrosion resistance. To perform these services, the contractor must utilize vacuum furnaces and plasma spray booths and maintain mandatory NADCAP certification for chemical processing or coating. This opportunity is categorized under NAICS code 332722 and is to be performed in Cherry Point. The solicitation was posted on September 28, 2026, with a response deadline of October 6, 2026. The final deliverable consists of fully coated and finished stator components meeting the specified technical requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Specialized Aerospace Material SupplyThis subcontract for the Department of Defense, managed by the ASC Supplier Oper OEM Division, involves the sourcing, smelting, and certification of high-performance nickel-based or titanium superalloys. The supplier is responsible for providing raw aerospace-grade materials, including billets, sheets, or castings, specifically for NSN 2840-01-168-6564. All deliverables must adhere to technical drawings and include material test reports and certificates of conformance in strict compliance with DFARS Specialty Metals clauses. The contract falls under NAICS code 331491 and is to be performed in Cherry Point. Interested parties must respond by October 6, 2026, following the posting date of September 28, 2026. This agreement ensures that prime contractors on DLA supply contracts receive certified raw materials that meet rigorous aerospace standards.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 10 hours ago

DEADLINE

Precision Aerospace Component ManufacturingThis subcontract for Precision Aerospace Component Manufacturing involves the production of the Third Stage Compressor Stator Assembly for prime contractors under DLA supply contracts. The scope of work includes precision machining, casting, or forging of stator vanes and housings, the assembly of the stator ring, and heat treatment in accordance with NSN 2840-01-168-6564. The project requires the use of high-temperature alloys and CNC precision milling, with performance taking place in Cherry Point. To qualify for this contract, manufacturers must hold AS9100 and NADCAP certifications. The opportunity is managed by the Department of Defense through the ASC Supplier Oper OEM Division under NAICS code 336412. The final deliverable is the completed Compressor Stator Assembly, Third Stage, with a response deadline of October 6, 2026.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

DLA Compliant Packaging and Shipping ServicesThis subcontract opportunity, titled DLA Compliant Packaging and Shipping Services, is issued by the Department of Defense under the ASC Supplier Oper OEM Division. The project requires the performance of specialized packaging for prime contractors on DLA Aviation ASC projects, with a strict mandate to adhere to RP001 packaging requirements for procurement. The selected provider must utilize military-grade materials to ensure the preservation and protection of items during transit and is responsible for delivering shipment-ready products. The contract is designated as a Total Small Business Set-Aside under NAICS code 561910. It was posted on September 28, 2026, with a response deadline of October 6, 2026. Interested parties can find further details through the DIBBS portal using the provided solicitation link.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Manufacturer of NSN 6685-01-241-5824This subcontract involves the manufacture of hardware component NSN 6685-01-241-5824 for prime contractors supporting DLA Aviation ASC projects. The selected provider must utilize specialized facilities for wireless communication and electronic components to produce the end item in strict accordance with the technical data and quality requirements specified in RA001 and RP001 standards. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334220 and is managed by the Department of Defense ASC Supplier Oper OEM Division. Interested parties must submit their responses by October 6, 2026, to provide the finished physical components as required by the agency.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Manufacture and Supply of Wire Rope Assemblies (NSN 4010006293074)This subcontract involves the manufacture and supply of specialized wire rope assemblies under NSN 4010006293074 for the Department of Defense, specifically the ASC Supplier Oper OEM Division. The contractor is responsible for fabricating 14 completed assemblies using precision cutting and swaging tooling in accordance with reference drawings 98897 O170 (Rev C), 98897 G700 (Rev G1), and 98897 STP54-101 (Rev V). Quality validation is required through First Article Testing, and the final deliverables include the assemblies and a corresponding FAT validation report. The project is designated as a Total Small Business Set-Aside under NAICS code 332999 and will be performed in Greensboro, North Carolina. The solicitation was posted on September 28, 2026, with a response deadline of October 6, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Department of Defense, specifically the ASC Supplier Oper OEM Division, involves specialized military packaging, marking, and palletization services for prime contractors on DLA and Navy supply contracts. The scope of work requires the delivery of 39 pins, fully packaged and marked for FOB Origin pickup in Tracy, California. The contractor must adhere to strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for markings, and RP001 for palletization. All work must be executed using MIL-SPEC packaging materials and industrial marking equipment. The solicitation was posted on September 28, 2026, with a response deadline of October 6, 2026, under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS