Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Heat and Moisture Exchangers (HMEs) for Respiratory Care

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of single-use, transparent heat and moisture exchangers (HMEs) designed for respiratory care, featuring a low dead-space and lightweight construction to accommodate tidal volumes ranging from 150 to 1500 mL. These HMEs must meet specific performance criteria to ensure effective humidification and filtration in clinical settings, with all units requiring MIL-STD-129 labeling for standardized military logistics and traceability. The procurement is classified as a subcontract under NAICS code 325620, indicating it pertains to medical equipment and supplies manufacturing. Delivery is required to Scott AFB, Illinois, with the zip code 62225-5219 serving as the official place of performance. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, with the contracting entity operating under the Department of Defense’s Medical Supply Chain MD Surg FSF. All suppliers must comply with the labeling and delivery specifications without exception to ensure seamless integration into military medical operations.

General Info

Supply of MIL-STD-129 labeled HMEs for Scott AFB, Illinois, due July 28, 2026, under DoD medical contract.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

325620 - Toilet Preparation ManufacturingView NAICS

Place of Performance

SCOTT AFB, IL, 62225-5219, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of single-use, transparent HMEs with low dead-space and lightweight design for tidal volumes 150–1500 mL, including MIL-STD-129 labeling and delivery.

Similar Contracts

Same NAICS industry code

Medical Respiratory Filter Supply

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Commercial Supplier of Urethral Catheterization Kits (NSN: 6515016152124)The contract seeks commercial suppliers to provide urethral catheterization kits identified by NSN 6515016152124, ensuring full compliance with Department of Defense technical specifications, packaging standards, and delivery protocols established by the Medical Supply Chain. The kits must meet all military-grade requirements for quality, sterility, and functionality as defined by DLA standards, and suppliers are expected to align with government delivery timelines and logistics obligations. This subcontract is issued under NAICS code 325620, which pertains to medical equipment and supplies manufacturing, and performance is required at Fort Bliss, Texas, with a zip code of 79918-2527. The solicitation was posted on July 22, 2026, and responses are due by July 28, 2026, providing a six-day window for bids. The contract falls under the Department of Defense’s procurement framework, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, and is accessible via the DIBBS RFQ portal. While no set-aside designation is specified, all interested parties must be prepared to fulfill the full scope of technical and delivery conditions without exception. Suppliers must ensure their offerings are ready for immediate integration into the military medical supply chain upon award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterile Medical Kit Supply – Tracheostomy Care KitThe contract calls for the supply of sterile, individually packaged tracheostomy care kits designed for hospital use, with each kit containing gloves and other essential components required for safe and effective tracheostomy management. All products must meet FDA Class II medical device standards and comply with MMS NO. 1 packaging specifications to ensure sterility, safety, and compatibility with military medical protocols. The kits are intended for use in clinical settings under the Department of Defense's Medical Supply Chain, specifically supporting operations at JBER with a zip code of 99506-4400 as the designated place of performance. The solicitation is structured as a subcontract under NAICS code 325620, which pertains to surgical and medical instrument manufacturing, and is open for response until July 28, 2026, with the request posted on July 22, 2026. Participation is managed through the DIBBS system and all vendors must adhere to the strict regulatory and packaging requirements outlined to ensure seamless integration into military healthcare logistics.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Sterilization Indicator Manufacturing and PackagingThe contract requires the manufacture, packaging, and labeling of chemical sterilization indicators that meet stringent FDA and Department of Defense Logistics Agency standards, with specific requirements including red color-coded packaging, accurate sterility dating, and compliance with MIL-STD-129 labeling protocols. Production must ensure consistent quality and regulatory adherence for use in medical and defense supply chains, with all items destined for performance at Suffolk, Virginia, 23435-5000. The solicitation is classified as a subcontract under NAICS code 325620, indicating focus on chemical manufacturing, and is issued by the Department of Defense through the Medical Supply Chain FSH office. Responses are due by July 29, 2026, following a posting date of July 22, 2026, with no set-aside type specified, meaning all eligible entities may compete.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Medical Oxygenators and Blood ReservoirsThe contract solicits the supply of sterile, single-use oxygenators and blood reservoirs intended for use in extracorporeal circulation systems, with all deliveries required to be made directly to the designated destination at Scott Air Force Base, zip code 62225-5219. These medical devices are critical components in cardiac and surgical procedures, and must meet stringent sterile and single-use specifications to ensure patient safety and regulatory compliance. The contract is classified as a subcontract under NAICS code 325620, which corresponds to the manufacturing of medical and surgical instruments, and is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF organization. Responses are due by July 28, 2026, with the solicitation posted on July 22, 2026, indicating a brief six-day window for submissions. The place of performance is fixed at Scott Air Force Base, meaning all products must be shipped, accepted, and verified at that location without deviation. While no specific set-aside type is indicated, the procurement is part of a broader defense medical logistics effort to ensure reliable access to life-sustaining equipment for military medical facilities. Acceptance of the goods will be contingent upon strict adherence to sterility standards, packaging requirements, and timely delivery to support operational readiness.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Disposable Medical Heating Blankets Supply

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Disposable Airway Device Supply (Pharyngeal Berman – Medium Adult)The contract is for the supply of disposable, non-sterile pharyngeal airway devices of the Berman type, sized for medium adults at 90 mm, constructed from opaque plastic and packaged in units of 12 per pack. These devices are intended for use in airway management and must meet specified technical standards for size, material, and packaging to ensure compatibility and safety in clinical applications. The solicitation is issued as a subcontract under the NAICS code 325620, which corresponds to the manufacturing of medical and surgical equipment and supplies. The contract was posted on July 22, 2026, with a response deadline of July 28, 2026, indicating a brief window for potential vendors to submit proposals. The place of performance is identified as Ellsworth Air Force Base with a ZIP code of 57706-4821, suggesting that deliveries will be directed to this DOD facility. The ordering agency is the Department of Defense through its Medical Supply Chain MD Surg FSF division, and the solicitation is accessible through the DIBBS procurement portal with the reference number SPE2DS26T262L. There is no set-aside designation or specific point of contact provided in the published data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Medical Syringe Manufacturing & Sterilization

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

BABYPOWDER, CORNSTARThe contract is for the procurement of 1 package containing 12 bottles of BABYPOWDER, CORNSTARCH, each bottle sized at 15 ounces, under the NSN 8510-01-519-7739. The item is classified as a TYPE I (CODE Q) with a mandatory non-extendable shelf life of 36 months, and no more than five months may have passed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and the product must meet all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Bidders are required to clearly state the source and part number being supplied, and all supplies must remain free of government identification if not accepted. The purchase request number is 7017574820, and delivery is required within 20 days after award. The solicitation number is SPE2DS-26-T-260H, with a bid submission deadline of July 28, 2026, issued by the Department of Defense's Medical Supply Chain on July 22, 2026. The North American Industry Classification System code is 325620, and the point of contact for inquiries is Marc Canalichio, reachable via phone or email.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Toothpaste FOR Department of Corrections Various LocationsThe Missouri Department of Corrections is soliciting bids for the supply of fluoride-containing, ADA-approved toothpaste in three standardized sizes—4.2 oz, 6.4 oz, and 9.0 oz—through an Invitation for Bid (IFB) with solicitation number DOC 0000000063SL. The contract is structured as a Firm-Fixed-Price arrangement with optional one-year renewals for each item up to two additional periods, capped at the original estimated quantities. All deliveries must be made FOB Destination to designated correctional centers across Missouri, with vendors responsible for all packaging, shipping, and freight charges. Products must arrive in new, retail-quality condition on shrink-wrapped pallets meeting Grade 2/B or better standards and must include complete labeling with bidder information, item numbers, and UPC codes. Sample submissions are required and subject to inspection for conformance to specifications, with non-compliant samples leading to disqualification. Bidders must comply with Missouri’s Domestic Products Procurement Act, which imposes a 10% price penalty on non-U.S.-manufactured products unless a sole U.S. manufacturer qualifies the item under an exception. Participation in state-preference programs yields bonus points during evaluation: up to 15 points for commitments to organizations for the blind or sheltered workshops, and three fixed points for certified service-disabled veteran-owned businesses. Evaluation is conducted using a trade-off method prioritizing responsiveness, responsibility, and sample conformance as mandatory thresholds before cost performance is scored. Submission must be completed electronically via MissouriBUYS, with all required exhibits—including Buy American certification, tax compliance, business registration, conflict of interest disclosures, and pricing forms—fully completed. No fax, email, or mail submissions are accepted. Vendor personnel accessing correctional facilities are subject to background checks and restricted interaction with inmates, and contractors must verify compliance with state laws prohibiting employment of unauthorized aliens. Payment is processed via EFT to the vendor’s registered MissouriBUYS account, with invoices submitted electronically or by mail to the Department’s central accounts payable address. Contract award is not based solely on price, and failure to meet any mandatory requirement renders a bid non-responsive and ineligible for consideration.

DOC CORRECTIONS

POSTED

DEADLINE

Medical Supply Procurement – Blood Collection Test Tubes

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Oral Airway Medical Devices

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

BLOOD RECIPIENT SETThe blood recipient set is a sterile, disposable indirect transfusion device with a standard blood filter ranging from 170 to 260 microns, a male luer lock adapter, and a Y-type blood/solution set measuring 98 inches overall, designed for precise fluid delivery at 10 drops per milliliter. Each unit is packed in quantities of 48 per box, adhering strictly to commercial packaging standards and the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951 and MIL-STD-129. Packaging must ensure protection against damage, meet medical marking standard No. 1, and be palletized per DLA procurement guidelines, with all items marked and labeled accordingly for traceability and compliance. The product is manufactured by Baxter Healthcare Corporation under part number 2C6720 and is identified by NSN 6515-01-462-5563. The contract specifies delivery within five days FOB destination with zero quantity variance, inspection and acceptance occurring at the delivery point. Two separate delivery lines are listed, each requiring shipment to different Fort Bragg locations in North Carolina via the fastest traceable means, prohibiting parcel post. Delivery deadlines are set for July 17, 2026, and July 27, 2026, with specific freight shipping addresses and contact details for each recipient unit. Government use identifiers, project codes, and tracking data are included for internal logistics administration, and all documentation must align with DoD authorized units of issue. The solicitation, issued under SPE2DS-26-T-268R, was posted July 23, 2026, with responses due by July 29, 2026, and falls under NAICS code 334511 for medical device manufacturing, procured by the Department of Defense’s Medical Supply Chain for surgical and field support operations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

SENSOR, OXYGEN MONITORIThe contract involves the procurement of three oxygen monitoring sensors with plastic housings and electrical cells, designated by NSN 6515-01-318-1535, for delivery within 84 days to APO 96260-5479. Each unit must be individually sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carrier at the lowest cost. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all items must be properly identified in accordance with this standard. The sensors have a non-extendable shelf life of 96 months and are classified as a Type I (Code U) item under RS026 requirements. The solicitation incorporates applicable technical and quality standards from the DLA Master List, and suppliers must provide the source and part number being offered. The contract is subject to covered defense information protocols under RD003 and requires removal of government identification from non-accepted supplies per RQ011. Packaging must adhere to DLA requirements as outlined in section B of SPE2DS-26-T-262T, and all bids must be submitted by the response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

TEST STRIPS AND COLORThe contract specifies the procurement of urine test strips and color charts capable of detecting bilirubin, blood, glucose, ketone, leukocytes, nitrite, pH, protein, specific gravity, and urobilinogen, each packaged in bottles of 100 strips per unit, with a total quantity of two units required. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and are subject to medical packaging standards, including compliance with Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must ensure protection against damage and safe delivery via common carriers at the lowest cost, with all labels clearly displaying the date of manufacture, expiration date, contract number, and lot number in accordance with MMS1C guidelines. A shelf-life requirement of 18 months is mandatory and non-extendable, with no more than two months allowed to have elapsed between the date of manufacture and the date of delivery to the government. The items are classified as a TYPE I (CODE K) item under the shelf-life specification, and all labeling must conform to the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-263E, issued on July 23, 2026, with responses due by July 29, 2026, and delivery required within five days of award. The contracting office is under the Department of Defense’s Medical Supply Chain, with Mary-Kathryn Donahue designated as the primary point of contact. The NSN is 6550-01-221-5400, and the NAICS code is 325412, identifying the industry as medical and surgical instrument manufacturing.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of disposable applicators with an overall maximum length of 4.000 inches and a nominal shaft diameter of 0.200 inches, featuring a round tip and either rayon or cotton head impregnated with povidone-iodine. Each unit must be individually sealed in a suitable container to prevent damage or breakage and packed in commercial shipping containers that ensure safe delivery via common carrier at the lowest cost to the designated destination. All items must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and markings must adhere to the latest edition of this standard available through DLA Troop Support. The unit of issue is a package (PG) containing 75 units, and packaging must meet MIL-STD-2073-1E requirements. The item is regulated by the FDA under Class I, with regulation 880.6025, and while a 510(k) is not required, compliance with registration, listing, labeling, and GMPs is mandatory. The contract mandates no substitutions and requires bidders to provide the source and part number, with approved suppliers including Cardinal Health 200, LLC, Medline Industries, LP, and NICE-PAK Products Inc. Delivery is FOB destination within 20 days, with zero variance allowed in quantity, and inspection and acceptance occur at the point of delivery. The NSN is 6515-01-316-9295, and the solicitation number is SPE2DS-26-T-266C, with a response deadline of July 29, 2026.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

SPLINT, LEGThe contract is for a three-panel knee immobilizer splint, designed for post-operative immobilization of injured knees, with a universal left or right fit suitable for most patients. It features polyurethane foam and mesh side panels with trimmable design, contoured stays, and five hook-and-pile closures for secure fit, accommodating thigh circumferences up to 32 inches and a standard length of 24 inches. The product includes a closed patella design and is issued as a single unit. Technical and quality requirements referenced under R and I numbers are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation or award date, depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed. Bidders must clearly state the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-265B, has a response deadline of July 29, 2026, with performance delivery expected within 20 days after order. The contracting office is the Department of Defense, Medical Supply Chain, located at Fort Bliss, Texas, with James Burke as the primary point of contact.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

MASK, ORONASALThe contract specifies the procurement of a single adult oronasal resuscitator mask with a latex-free blue cuff, identified by NSN 6515-01-036-9070 and part numbers from approved manufacturers including AMBU INC, CARDINAL HEALTH, and MEDLINE INDUSTRIES. The unit of issue is each, with a quantity of one, and delivery is required within 20 days FOB destination to Fort Bliss, Texas. All packaging must comply with DLA Packaging Requirements, ASTM D3951, and the Medical Marking Standard No. 1, superseding MIL-STD-129, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe carrier delivery at the lowest rate. Markings on all containers must include the MFD prefix followed by the lot and manufacture date, along with NSN, manufacturer, CAGE code, contract number, and expiration or retest date. The product is FDA-regulated and requires pre-award referral via EBS for confirmation. Shipping must be traceable and cannot use parcel post, with all shipments directed to the specified Fort Bliss delivery point. The contract is governed by DLA’s Master List of Technical and Quality Requirements, and the solicitation is issued under SPE2DS-26-T-268G with a response deadline of July 29, 2026.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

NEEDLE, INTRAOSSEOUSThe contract specifies the procurement of intraosseous needles, specifically the EZ-IO Needle and Stabilizer Kit, identified by NSN 6515-01-648-7346, with a quantity of four units. Each unit includes a 15 gauge 25 mm needle, an EZ-stabilizer dressing, an EZ-connect IV extension set, a needleVISE-1 port, and a patient wristband. The items must have a shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with commercial standards, ensuring each unit is sealed in a protective container and shipped in suitable exterior packaging that ensures safe delivery at the lowest cost to the designated point of delivery. All items must be labeled with the NSN, manufacturer and CAGE code, manufacturing and expiration dates, and contract or lot number. Marking must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and bidders must clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-265X, requires delivery within 20 days after award and is subject to the DLA Master List of Technical and Quality Requirements, with compliance mandatory for all technical and quality specifications referenced by R or I numbers. The contracting office is the Department of Defense’s Medical Supply Chain, with the place of performance listed as FPO, 96694, and points of contact provided for inquiries.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

DRAINAGE KIT, CLOSED SUThe contract is for the procurement of 3 pack units of a closed suction Jackson-Pratt drainage kit, each containing 10 disposable drainage units with a 100 mL reservoir and a radiopaque 97.5 cm long, 10 mm wide drain tube. The item is manufactured by Cardinal Health 200, LLC under part number SU130-1361 and is classified as a Class I medical device regulated by the FDA, requiring compliance with registration, listing, labeling, and good manufacturing practices. The product has a non-extendable shelf life of 60 months and must be packaged and marked in strict accordance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Each unit must be sealed in a protective container and shipped in commercial exterior containers ensuring safe delivery at the lowest cost to the destination. Delivery is required FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the delivery point. The shipment must be traceable, excluding parcel post, and delivered to Fort Bragg, North Carolina. The NSN is 6515-01-341-4523, and the purchase request number is 7017584396. The contract, issued under SPE2DS-26-T-262V, is part of a federal acquisition governed by DLA technical and quality requirements, with all packaging, marking, and logistical instructions aligned with DLA standards for medical acquisitions.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

APPLICATOR, DISPOSABLEThe contract specifies the procurement of 100 disposable povidone-iodine applicator swab sticks, packaged in two units of issue, each containing 50 applicators. Each unit must be individually sealed in a protective container to prevent damage or breakage, and all units must be packed in commercial shipping containers suitable for safe delivery via common carrier to the designated point of performance in APO, ZIP 96319-5024, at the lowest possible shipping cost. The product must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all labeling must include the manufacturer’s date, expiration or retest date, and the contract or lot number, following the latest revision of MMS1A. The product must have a minimum shelf life of 15 months, with no more than two months having elapsed between the manufacturer’s date and delivery to the government. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable specifications identified by R or I numbers. The solicitation, issued under contract number SPE2DS-26-T-265P, requires bidders to disclose the source and part number being supplied, and responses are due by July 29, 2026, with delivery due within 20 days after award.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

PENCIL, ELECTRODE, ELECTThe contract specifies the procurement of a sterile, disposable electrosurgical pencil electrode designed for use with the CONMED System 5000, featuring a polytetrafluoroethylene handle, latex-free construction, a push-button switch, a 1-inch ultraclean blade, and a 10-foot cable. Each unit is packaged in a sealed container to protect against damage and must be shipped in commercial exterior containers suitable for safe delivery at the lowest cost to Fort Bragg, North Carolina. The product must have a 60-month shelf life, with no more than nine months elapsed between manufacture and government delivery. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must include the NSN 6515-01-575-6486, manufacturer and CAGE code, date of manufacture or expiration, and contract or lot number. The unit of issue is a package of 40 units, and bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-264A, requires compliance with DLA’s Technical and Quality Requirements, includes provisions for handling covered defense information, and mandates removal of government identification from non-accepted supplies. The contract was posted on July 23, 2026, with a response deadline of July 29, 2026, and delivery is required within five days of award.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

ADHESIVE TAPE, SURGICALThe contract specifies the procurement of surgical adhesive tape measuring 6 inches wide by 10 yards long, packaged in units of 12 rolls per package, for a total quantity of three packages. The product must be Medipore brand and comply with stringent shelf-life requirements, including a mandatory 60-month shelf life from the date of manufacture, with no more than 51 months having elapsed between manufacturing and delivery to the government. All labeling must conform to the latest revision of MMS1A and clearly display the manufacturer’s date, expiration or retest date, and the contract and lot numbers. The item is governed by multiple technical and quality requirements, including RS023 for non-extendable shelf-life control, RD003 for potential covered defense information, RP001 for DLA packaging standards, and RQ011 regarding removal of government identification from non-accepted supplies. Bidders are required to provide the specific source and part number being supplied, and the procurement is linked to NSN 6510-01-588-1947 under solicitation SPE2DS-26-T-263F, with a response deadline of July 29, 2026, and a delivery requirement within five days of award to Fort Bragg, North Carolina. The contract falls under NAICS code 322211 and is managed by the Department of Defense’s Medical Supply Chain.

Corrugated and Solid Fiber Box Manufacturing

POSTED

DEADLINE

CUTTER, LINDEMANNThe contract specifies the procurement of five disposable 12 mm Lindemann Cutter II HI-LINE XS instruments under solicitation SPE2DS-26-T-264S, with a unit price of $5.00 and a total value of $25.00. The item is classified under NSN 6515-01-549-6161 and is regulated by the FDA, requiring the contracting official to refer the bid to a product specialist for confirmation, including details on the bidder, manufacturer, part number, and description. The equipment must be supplied with clear source and part number identification, with eligible manufacturers including Aesculap, Inc. and Trillamed LLC. All packaging must comply with commercial standards as specified in the procurement document, ensuring sealed unit containers protect against damage and shipping containers enable safe, cost-effective delivery to the destination. Medical Marking Standard No. 1 replaces MIL-STD-129 as the governing marking requirement, and copies must be obtained directly from DLA Troop Support or via the DLA website. Delivery is required within 20 days FOB destination to the USNS COMFORT, FPO AE 09566-4008, with no variance allowed in quantity. The contract requires palletization per DLA packaging guidelines and references specific logistics protocols for transportation and shipping. The response deadline is July 29, 2026, with an original required delivery date of July 22, 2026, and technical and quality requirements are incorporated by reference from the DLA Master List.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE