Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Heavy-Duty Non-Woven Polypropylene Geotextile

Active

Federal

Response Deadline09/22/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically for FA4855 27 Socons Lgc, involves the supply of heavy-duty, non-woven, permeable polypropylene geotextile fabric. The materials are specifically manufactured or sourced for use as liners in HESCO MIL 10 earth-filled barriers and must meet strict technical requirements for durability and permeability. The fabric is to be delivered in bulk rolls or pre-cut dimensions to support prime contractors. The project is designated as a total Small Business Set Aside under NAICS code 313310, with the place of performance located at Cannon AFB in New Mexico. The solicitation was posted on September 18, 2026, with a response deadline of September 22, 2026.

General Info

DoD subcontract for polypropylene geotextile fabric liners at Cannon AFB, New Mexico.

Agency

Department Of Defense → FA4855 27 Socons LgcView Agency

NAICS

313310 - Textile and Fabric Finishing MillsView NAICS

Place of Performance

Cannon AFB, NM, 88103, USA

Set-Aside

SBA

Documents

This scope was carved out of F1L1MR6237AG01.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HESCO DEFENSE BARRIERS Sources sought

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 18

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 06:00:00 PM UTCin about 16 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4855 27 Socons Lgc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4855 27 Socons Lgc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies heavy-duty, non-woven, permeable polypropylene fabric for prime contractors on FA4855 27 Socons Lgc projects. Manufactures or sources fabric specifically for use as liners in HESCO MIL™ 10 earth-filled barriers. Supplies fabric in rolls or pre-cut dimensions meeting technical requirements for permeability and durability. Delivers bulk or cut-to-size industrial geotextile fabric.

Similar Contracts

Same NAICS industry code

Specialized Textile Extrusion Coating ServicesThis subcontract for Specialized Textile Extrusion Coating Services supports NASA Artemis Suit Materials projects by performing polyimide extrusion coating on high-performance aerospace fibers. The scope of work involves applying these coatings to Kevlar, Vectran, or PBO fibers to create sample sets, fabric swatches, and production-scale coated bobbins. Due to the nature of the materials, the project requires the use of precision textile manufacturing equipment and adherence to aerospace-grade quality control standards. The contract, managed by the NASA Shared Services Center and performed in Houston, Texas, requires the delivery of three fiber sample sets, two fabric swatches, and one-half spool of coated fiber. It falls under NAICS code 313310 and was posted on September 21, 2026, with a response deadline of September 23, 2026.

NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

FR Nomex Fabric SupplyThis subcontract under the Department of Defense for agency FA5606 52 Cons Da Lgc involves the sourcing and delivery of raw flame-resistant Nomex fabric in Operational Camouflage Pattern. The supplier is responsible for providing rolls and bolts of textiles that strictly adhere to military safety specifications and OCP pattern standards, ensuring all materials are certified as flame-resistant for use by prime contractors. The project is categorized under NAICS code 313310 and is designated for performance in Spangdahlem. Interested parties must note the tight turnaround for the solicitation, which was posted on September 18, 2026, with a response deadline of September 23, 2026.

FA5606 52 Cons Da Lgc

POSTED

DEADLINE

Supply of Aluminized Glass and Silicone ClothThis subcontract opportunity with the Department of Defense Fluid Handling Division involves the supply of raw technical textiles for prime contractors. The selected provider will deliver industrial-grade high-temperature resistant aluminized glass cloth and silicone-coated fabric in rolls or sheets, ensuring all materials meet specific overlap and bonding requirements. To verify heat resistance for Critical Application Items, the supplier must provide comprehensive material certifications and mill test reports. The project is designated as a Total Small Business Set-Aside under NAICS code 313310, with performance taking place in New Cumberland. Interested parties must respond by September 28, 2026, to be considered for the supply of these specialized materials.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Technical Fabrics for Vehicular CoversThis subcontract with the Department of Defense LSO Combat Vehicles and Armament involves the supply of raw technical textiles and coated fabrics for prime contractors. The scope of work includes providing high-performance vinyl, canvas, and synthetic polymers that adhere to the durability, weatherproofing, and fire-retardant standards specified in RA001. The supplier is required to provide material certifications to prove compliance and deliver the materials in either bulk rolls or cut pieces. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 313310, with the place of performance located in Texarkana, Texas. The solicitation was posted on September 17, 2026, and requires a response by September 28, 2026.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Safety Pins (NSN 8315-01-156-3545)This subcontract involves the manufacture or sourcing of 5,000 packages of Size 3, 2-inch long 144S safety pins, compliant with NSN 8315-01-156-3545. The supplier is responsible for delivering these items to prime contractors supporting the Department of Defense, specifically for the Medical Supply Chain MD Surg FSF. All deliverables must adhere to RP001 DLA Packaging Requirements and follow MIL-STD-129 for shipment and storage markings. The performance of this contract will take place at Camp Pendleton, California. Interested parties must possess a valid CAGE code for registration. The solicitation was posted on September 17, 2026, with a response deadline of September 23, 2026, under NAICS code 313310.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of 225th Engineer Brigade Shoulder Sleeve InsigniaThis subcontract, issued by C and T Supply Chain for the Department of Defense, involves the manufacture and supply of 100 full-color embroidered shoulder sleeve insignia for the 225th Engineer Brigade. These patches are intended for prime contractors supporting DLA Troop Support contracts for the Louisiana Army National Guard. The production requires industrial embroidery machinery to achieve a specific overedge stitching count of 7,353 and must include hook backing. To ensure quality and regulatory compliance, the manufacturer must obtain certification from the Institute of Heraldry and adhere to Buy American requirements. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 313310. The contract requires the delivery of 100 completed insignia following the specified technical standards.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-447X

This solicitation, issued by DLA Troop Support under number SPE2DS-26-T-447X, is a Request for Quotations for the procurement of infant safety pins. The required items are size 3, 2 inches long, nickel-plated steel with sharp points, provided in packages of 144. The procurement specifies approved manufacturers as Graham-Field Health Products (P/N 3039-3C) and Cardinal Health (P/N C18740-030). The quantity requested is 5 packages, with a required delivery date of September 18, 2026, and a destination-based inspection and acceptance process. The contract incorporates rigorous technical and quality requirements through the DLA Master List and mandates specific medical packaging and marking standards. While ASTM D3951 is referenced for packaging, Medical Marking Standard No. 1 (MMS No. 1) takes precedence for all marking and labeling requirements, superseding MIL-STD-129. Contractors must ensure all medical supplies are properly sealed to prevent damage and marked according to MMS No. 1. Additionally, the solicitation includes strict compliance mandates regarding cybersecurity, the safeguarding of covered defense information, and prohibitions on the use of additive manufacturing for the supplied parts. Quotations must be submitted via the DIBBS system no later than the close of business on September 23, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Medical-Grade Fabric and ElasticThis subcontract, titled Supply of Medical-Grade Fabric and Elastic, is issued by the Department of Defense under the Medical Supply Chain MD Surg FSF agency. The contract focuses on the procurement of raw medical-grade textiles, specifically hypoallergenic fabric for scrotal support and high-durability adjustable elastic for waist banding. All materials must comply with Medical Marking Standard No. 1 requirements and will be delivered as bulk fabric and elastic rolls. The opportunity was posted on September 16, 2026, with a response deadline of September 22, 2026. It falls under NAICS code 313310 and specifies a place of performance in APO 09227-0000. This agreement is designed to support prime contractors operating on Medical Supply Chain MD Surg FSF projects.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

in about 15 hours

Berry Amendment Compliant Textile and Vinyl SupplyThis subcontract with the Department of Defense Medical Supply Chain FSH involves the procurement of raw materials for prime contractors working on medical supply chain projects. The supplier is responsible for providing domestic-sourced black industrial-grade fabric and color-coded transparent vinyl sheets specifically intended for the fabrication of medical trauma packs. Deliveries consist of bulk rolls of these materials, which must be accompanied by certificates of origin. A critical requirement of this contract is strict adherence to the Berry Amendment and DFARS 252.225-7001, necessitating formal certification that the materials are sourced domestically. The performance of this contract is centered at Camp Pendleton, California, under NAICS code 313310. The solicitation was posted on September 16, 2026, with a response deadline of September 23, 2026.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of Aerospace-Grade Textile MaterialsThis subcontract involves the supply of aerospace-grade raw textile materials to prime contractors supporting DLA and Air Force aerospace component projects. The provider is responsible for sourcing and delivering technical textiles that adhere to strict military aerospace specifications for performance and function, which includes providing samples for evaluation at the Materials and Textiles Lab at Wright-Patterson Air Force Base. The scope of the agreement covers the delivery of raw textile materials sufficient to produce 370,000 canopies. Managed under the Department of Defense through the ASC Supplier OE and AF Division, the contract falls under NAICS code 313310.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-13Z2

This solicitation, issued by DLA Land and Maritime under requisition 7017600871, is a Request for Quotations for the procurement of webbing straps under NSN 5340-00-753-3744. The requirement consists of two line items totaling 2,534 units, with a primary quantity of 2,524 units. Deliveries are to be made FOB Origin to DLA Distribution locations in Barstow, CA, and New Cumberland, PA, with an original required delivery date of October 16, 2027. The procurement is subject to strict technical and quality requirements identified in the DLA Master List, and all packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The contract incorporates significant regulatory and security mandates, including export control restrictions under ITAR and EAR, requiring offerors to have approved JCP certification and DLA authority to access technical data. Compliance with the Buy American Act and the Berry Amendment is mandatory, and any use of non-domestic materials must be disclosed. Furthermore, the solicitation prohibits the use of additive manufacturing unless specifically authorized and requires adherence to cybersecurity standards, including NIST SP 800-171 and CMMC Level 2. Small business concerns, specifically those certified by the SBA as HUBZone businesses, may receive a price evaluation preference. All invoicing and payment requests must be processed electronically through the Wide Area Workflow (WAWF) system.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fusible Interlining Supplier (Type V)This subcontract, managed by the Department of Justice under Federal Prison Industries, requires the supply of 5,000 yards of fusible interlining material for prime contractors working on UNICOR Clothing and Textile Business Group projects. The specific material required is Fusible Interlining, 6122, Type V, CL3, Style B, identified by part number FAB6122FUSE. The contract is designated as a total small business set-aside under NAICS code 313310, with the place of performance located in Washington. To ensure quality and compliance, the supplier must provide a Certificate of Conformance, physical test results, and packing slips with every shipment.

Inc Federal Prison Industries

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4855 27 Socons Lgc

Same awarding agency

Supply of Geotextile-Lined Defensive Barriers (MIL™ 10)This subcontract with the Department of Defense involves the manufacture and supply of HESCO MIL 10 geotextile-lined defensive barriers for prime contractors supporting FA4855 27 Socons Lgc projects. The units must be fabricated using a coated wire mesh frame and a heavy-duty, non-woven, permeable polypropylene geotextile liner in either beige or green. All mesh components must adhere to ASTM A856 and conform to BS EN ISO:2018:2012 and BS EN ISO:2044:2009 standards to ensure structural integrity and compliance. The contract is designated as a total Small Business Set Aside under NAICS code 332999, with performance taking place at Cannon AFB in zip code 88103. The supplier is responsible for delivering completed units that meet all specified dimensions. The solicitation was posted on September 18, 2026, with a response deadline of September 22, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 16 hours

Supply of Cisco 1000 Mbps Multi-Mode Rugged SFPsThis subcontract involves the procurement and delivery of 180 Cisco 1000 Mbps Multi-Mode Rugged Small Form-factor Pluggable (SFP) transceivers, specifically part number GLC-SX-MM-RGD. These components are intended for prime contractors working on projects for the Department of the Air Force 27th Special Operations Contracting Squadron. To be eligible, providers must procure the units through an authorized Tier-1 Cisco Distributor and maintain a Federal Authorized Partnership with Cisco or obtain CCW Deal Registration Approval. The opportunity is designated as a Total Small Business Set Aside under NAICS code 423430. Managed by the Department of Defense through the FA4855 27 Socons Lgc agency, the contract specifies a place of performance in zip code 88101. The solicitation was posted on September 18, 2026, with a response deadline of September 23, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Exhaust Troubleshooting

Solicitation # FA485526Q0072

Solicitation FA485526Q0072 is a Firm-Fixed-Price contract issued by the 27th Special Operations Contracting Squadron for exhaust system troubleshooting and repair at Building 4607, Cannon Air Force Base, New Mexico. This requirement is a 100% Small Business Set-Aside under NAICS code 238210. The scope of work involves testing and troubleshooting the communications BUS for all controllers and terminal equipment, including air handler units, exhaust fans, and various water and breathing air systems. The contractor is responsible for verifying the sequence of operations and providing a detailed written deficiency report. While minor repairs such as re-terminating controllers are included, major repairs involving high bay wiring or long runs are excluded. The contract requires performance to be completed within 90 days of the order receipt. Offers are evaluated based on technical acceptability, past performance, and price, with the award going to the responsible offeror most advantageous to the government. Submission requirements include a completed pricing worksheet, offeror certifications, and a conflict of interest statement. All offerors must be registered in the System for Award Management and certified as a Small Business. Payment is processed electronically through the Wide Area Workflow system.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Cisco 1000Mbps Multi-Mode Rugged SFP

Solicitation # FA485526Q0080

Solicitation FA485526Q0080 is a firm-fixed-price, brand-name requirement issued by the 27th Special Operations Contracting Squadron (AFSOC) for the procurement of 180 Cisco 1000Mbps Multi-Mode Rugged SFP transceivers, part number GLC-SX-MM-RGD. This acquisition is a total small business set-aside under NAICS code 334210. The brand-name requirement is justified by the need for interoperability with existing Cannon NIPR and SIPR network infrastructure. Delivery is required within 30 days after receipt of order to the designated location at Cannon Air Force Base in Clovis, New Mexico, with shipping terms set as FOB Destination. To be considered responsive, offerors must be registered in the System for Award Management (SAM) and provide proof of a Federal Authorized Partnership with Cisco or a Cisco Commerce Workspace Deal Registration Approval routed through an authorized Tier-1 distributor. Submissions must include a completed pricing worksheet, offeror information and certification, and a signed conflict of interest statement. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, based on technical compliance with the specified part number, past performance, and price. All offers must be submitted by September 23, 2026, and prices must remain firm for 35 calendar days.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

HESCO DEFENSE BARRIERS Sources sought

Solicitation # F1L1MR6237AG01

This notice is for market research purposes only to determine valid competition for the procurement of HESCO MIL 10 defensive barriers for the Department of Defense, specifically the 27 Socons Lgc at Cannon Air Force Base, New Mexico. This is a sources-sought notice and not a solicitation; therefore, no contract award will result from this specific notice. The requirement is designated as a Total Small Business Set Aside under NAICS code 332999. The requirement specifies multi-cellular, geotextile-lined welded mesh barrier systems that ship flat-packed on pallets for rapid mechanical deployment. Each unit must have nominal dimensions of approximately 2.21 meters in height, 1.52 meters in width, and 30.5 meters in length. Technical specifications require high-tensile steel wire between 4.0 mm and 4.88 mm with a 76.2 mm grid spacing, coated with Galfan or Hot-Dipped Galvanized finishes to meet ASTM A856 and BS EN ISO standards. The barriers must feature a heavy-duty, UV-stabilized, non-woven polypropylene geotextile liner with a minimum weight of 250 g/m2. Available color options include Military Tan/Beige and Olive Drab Green.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 16 hours

27 SOCES Vertical Transportation Equipment (VTE) Services

Solicitation # FA485526AP0001

The 27 Special Operations Civil Engineering Squadron is conducting market surveillance via a Request for Information to identify capable sources for the maintenance, repair, and inspection of vertical transportation equipment at Cannon Air Force Base, New Mexico. The scope of work includes full service responsibility for elevators, vehicle lifts, and dock levelers, requiring the contractor to provide all necessary management, tools, supplies, equipment, parts, and labor. This effort is categorized under NAICS 238290 and is being considered as a total small business set-aside, with interest in 8(a), HUBZone, Service-Disabled Veteran-Owned, and Women-Owned small businesses. The draft Performance Work Statement mandates strict adherence to safety and technical standards, including ASME A17.1 and A17.2, NFPA, OSHA, and original equipment manufacturer recommendations. Contractors must implement a quality control program and provide a designated contract manager within five days of award. While the primary contract covers routine and emergency services, a separate line item is established for over and above work discovered during performance. Interested parties must submit a capability statement, business information, and a summary of similar experience from the past three years by the specified deadline to assist the government in determining the final acquisition strategy.

Other Building Equipment Contractors

POSTED

DEADLINE

Dock Leveler Maintenance and RepairThis subcontract opportunity, titled Dock Leveler Maintenance and Repair, is a total small business set-aside under NAICS code 811310 for the Department of Defense. The project involves performing specialized maintenance and repair of industrial dock levelers at Cannon AFB. Key technical responsibilities include testing hydraulic and pneumatic cylinders, lubricating pivot points, conducting structural weld inspections, and adjusting lips using heavy-duty steel components and industrial lubricants to ensure all equipment meets certified operational standards and industrial safety requirements. The contract is managed by the FA4855 27 Socons Lgc agency and is specifically designated for prime contractors operating on US Air Force projects. Interested parties must submit their responses by September 23, 2026. The work will be performed locally at Cannon AFB in the 88103 zip code area.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Vehicle Lift Maintenance and RepairThis subcontract opportunity is for the maintenance and repair of automotive and vehicle lifts at Cannon AFB for the Department of Defense. The selected provider will perform critical technical services including hydraulic fluid changes, seal replacements, lift arm calibration, and structural integrity inspections using specialized pressure testers and heavy-duty jacks. All work must adhere to OSHA safety standards and manufacturer certifications to ensure the delivery of certified operational equipment. The project is designated as a total Small Business Set Aside under NAICS code 811310. Interested parties must respond by September 23, 2026, for this requirement managed by the 27 Socons Lgc agency. Performance will take place at Cannon AFB in zip code 88103.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Elevator Maintenance, Repair, and InspectionThis subcontract opportunity is for the provision of elevator maintenance, repair, and inspection services at Cannon AFB for the Department of Defense. The scope of work includes performing routine maintenance, emergency repairs, and safety inspections, with specific tasks involving periodic lubrication, hoistway adjustments, cable inspections, and control system testing. All work must be performed in accordance with the ASME A17.1 Safety Code for Elevators and Escalators, and the contractor is required to provide certified operational elevators and detailed inspection reports. Qualified bidders must possess the necessary state and local elevator licensing and utilize elevator-specific diagnostic tools. This is a Small Business Set Aside under NAICS code 238290. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Other Building Equipment Contractors

POSTED

DEADLINE

Chiller Startup and Pre-Start Inspection ServicesThis subcontract opportunity is for Chiller Startup and Pre-Start Inspection Services at Cannon AFB for the Department of Defense. The selected provider will perform technical startup and pre-operational inspections of chiller units, including system air control testing, coil filling, post-installation cleaning, and the use of specialized HVAC diagnostic and refrigerant charging tools. The final deliverables include a fully commissioned unit and a detailed inspection report. The project is designated as a total Small Business Set Aside under NAICS code 238220. All personnel must be qualified and compliant with the Standards for Construction of Large Space Heating and Cooling Systems. The response deadline for this requirement is September 23, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

TRANE 60 Ton Air Cooled Packaged Chiller SupplyThis subcontract, issued by the Department of Defense under the FA4855 27 Socons Lgc agency, involves the procurement and delivery of one Trane 60 Ton Air Cooled packaged Chiller unit for prime contractors operating at Cannon AFB. The specific equipment required is Model CGAM060A2\3EXD2A1A3A1AX\A1D2B4XXAXXXB1A3A1D1XXLXX, featuring a cooling capacity of 60.56 tons, 460 Volt 3 Phase electrical specifications, and R-454B refrigerant. The project requires strict adherence to the Standards for Construction of Large Space Heating and Cooling Systems and includes the delivery of the unit directly to the site. This opportunity is designated as a Total Small Business Set Aside under NAICS code 423610, with a response deadline of September 23, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

B4625 TRANE CHILLER REPLACEMENT

Solicitation # FA485526Q0011

Solicitation FA485526Q0011 is a Total Small Business Set-Aside for the procurement of one TRANE 60 Ton Air Cooled packaged Chiller unit (Model CGAM060A2**3EXD2A1A3A1AX*A1D2B4XXAXXXB1A3A1D1XXLXX) for Building 4625 at Cannon AFB, New Mexico. The scope of work includes the delivery of the unit, startup services, and a pre-start inspection. The equipment must feature a cooling capacity of 60.56 tons, utilize R-454B refrigerant, and operate on 460 Volt 3 Phase power. This is a brand-name only solicitation; no substitutes or equal items will be accepted. Delivery is required within 238 days after receipt of order, with the FOB point designated as destination. The contract is a Firm-Fixed-Price agreement where award will be made to the responsible offeror determined to be most advantageous to the government based on price, technical compliance with salient characteristics, and past performance. Offerors must submit a completed pricing worksheet, offeror information and certification, and a conflict of interest statement by the September 23, 2026, deadline. Notably, funds are not presently available for this effort, and no award will be made until such funding is secured. Payment will be processed electronically via the Wide Area WorkFlow system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS