Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of High-Pressure Seals and O-Rings for Air Regulator

Active

Federal

Response Deadline10/09/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of specialized high-pressure seals, gaskets, and O-rings for air regulators, supporting prime contractors on DLA supply contracts. The provider must source elastomers and fluoropolymers compatible with reference design 116-35720 and ensure all deliverables meet CDAP standards. Required documentation includes certificates of conformance, material traceability, and manufacturing source CAGE codes. The contract is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency under NAICS code 326112. It was posted on September 9, 2026, with a response deadline of October 9, 2026. The primary objective is the delivery of certified sealing components that adhere to strict military and technical specifications.

General Info

Supply of certified high-pressure seals and gaskets for DLA air regulator contracts.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

326112 - Plastics Packaging Film and Sheet (including Laminated) Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QGG42.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AIR,REGULATOR,ASSY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 9

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 08:30:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized high-pressure seals, gaskets, and O-rings for prime contractors on DLA supply contracts. Sources elastomers and fluoropolymers compatible with reference design 116-35720. Provides certificates of conformance (CoC), material traceability, and manufacturing source CAGE codes in compliance with CDAP standards. Delivers certified seals and gaskets.

Similar Contracts

Same NAICS industry code

Specialized Meal Packaging Film SupplyThis subcontract agreement involves the supply of specialized micro-perforated packaging film to prime contractors supporting Gwinnett County Government meal packaging projects. The scope of work requires the delivery of 84 rolls of 50-gauge film, each measuring 8.75 inches in width and 1,461 feet in length. These products must be compatible with 2103 three-compartment compostable fiber trays and are required to meet or exceed the specifications of Oliver Packaging Item 62099. The procurement is categorized under NAICS code 326112 and is managed through the state of Georgia. Key administrative dates include a posting date of October 2, 2026, with a response deadline set for October 7, 2026.

Gwinnett County Government

POSTED

DEADLINE

IWQ 139793 Meal Packaging Film

Solicitation # IWQ #139793

Solicitation IWQ 139793 is an Informal Written Quotation issued by the Gwinnett County Government in Georgia for the supply and delivery of micro-perforated meal packaging film to Gwinnett County Health and Human Services. The required film must be compatible with 2103 trays and specifically capable of sealing to three-compartment compostable fiber trays. Technical specifications require a roll width of 8.75 inches, a length of 1,461 feet, a thickness of 50-gauge, and a core size just under 3 inches. Oliver Packaging Item #62099 is listed as the reference product, though equivalent products may be submitted if the vendor can prove they meet or exceed these quality standards, with the County serving as the sole determinant of acceptability. Award will be granted to the lowest responsive and responsible vendor, with evaluation factors focusing on price, quality, conformity to specifications, and delivery terms. Unit pricing must be all-inclusive of shipping and delivery, which is required F.O.B. Destination to Lawrenceville, Georgia, between 7:30 A.M. and 3:00 P.M. on weekdays. The successful supplier must furnish items within 90 days of the quote opening and coordinate delivery with the Gwinnett County Parks and Recreation Department. Submissions must be provided in a sealed package to the Gwinnett County Purchasing Division, as emailed or faxed quotes will not be considered. The contract incorporates various federal compliance requirements, including the Buy America Act, ADA standards, and equal opportunity clauses, and may require bid, performance, and payment bonds.

Gwinnett County Government

POSTED

DEADLINE

Thermal Insulation Sheet Supply (MIL-DTL-24688A)This subcontract involves the supply of 44 specialized thermal insulation sheets for prime contractors supporting the Department of Defense through DLA DIST SAN JOAQUIN. The materials must conform to MIL-DTL-24688A(1) Revision A, specifically Type 1, with dimensions of 24 by 48 by 2 inches. Quality assurance is managed through inspections performed per MIL-STD-1916 using either attribute or variable methods, and the provider must supply Safety Data Sheets for any hazardous materials. The project is categorized under NAICS code 326112 and will be performed in Tracy, California. Interested parties must respond by October 9, 2026, to meet the requirements of the solicitation posted on September 28, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supplier of Insulation Blankets (NSN 5640012006089)This subcontract involves the manufacture or sourcing of 20 insulation blankets under NSN 5640012006089 for prime contractors supporting Defense Logistics Agency supply contracts. The supplier must ensure all units are compliant with DFARS 252.223-7008 and adhere to strict quality and security standards, specifically requiring CMMC Level 2 certification and compliance with RA001 quality standards. The scope of work includes precise logistics and handling requirements, with packaging performed per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. The final deliverable consists of 20 fully packaged and marked insulation blankets. This opportunity falls under NAICS code 326112 and is associated with the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Clear PVC Tubing (NIIN 017060353)This subcontract involves the supply of clear PVC tubing, identified by NIIN 017060353, for prime contractors supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for manufacturing or sourcing the tubing in accordance with Commercial Item Descriptions and Individual Repair Part Ordering Data. All items must be packaged and marked according to MIL-PRF-23 and include DLR labels that comply with MIL-STD-129 section 4.2.2, with delivery terms set as FOB Destination. The opportunity is set aside for SBA and falls under NAICS code 326112. Managed by the Department of the Navy, the place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by October 19, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Material Supply (PVC/PE Pipe)This subcontract opportunity with the City of San Diego involves the supply and delivery of certified PVC and PE plastic piping up to 16 inches in diameter. The materials are intended for use by prime contractors working on various intersection projects located within San Diego, California. The selected provider must deliver specified plastic piping directly to the project sites and provide a Certificate of Compliance for all materials supplied. Interested parties must respond by the deadline of October 14, 2026.

City of San Diego

POSTED

DEADLINE

Pillow Vinyl Fabric SupplierThis subcontract agreement involves the supply of breathable blue vinyl fabric for prime contractors working on California Correctional Training and Rehabilitation Authority projects in Amador. The supplier is responsible for manufacturing vented vinyl fabric with microscopic holes, delivered in rolls of 100 to 125 yards. All materials must strictly adhere to ASTM D3774-96 and ASTM D3776-96 standards. To ensure quality and compliance, the supplier must provide ISO quality documentation and Certified Test Reports from recognized laboratories. The solicitation was posted on September 15, 2026, with a response deadline of October 9, 2026.

Correctional Trng Rehabilitation Aut

POSTED

DEADLINE

Mattress Vinyl Fabric SupplierThis subcontract involves the supply of heavy-duty, flame-resistant vinyl laminated polyester fabric for prime contractors working on California Correctional Training and Rehabilitation Authority projects in Amador. The supplier manufactures a 2-ply product by binding PVC material to polyester fibers using heat and adhesive, delivering the material in rolls of 100 to 125 yards. To ensure safety and quality, the fabric must comply with ASTM D6413, 16 CFR Parts 1632/1633, CAL TB121, and TB129 standards. The provider is required to furnish ISO quality documentation and Certified Test Reports to verify these specifications. The solicitation was posted on September 15, 2026, with a response deadline of October 9, 2026.

Correctional Trng Rehabilitation Aut

POSTED

DEADLINE

HDPE Pipe Fittings and Accessories SupplierThis subcontract opportunity is for the supply of specialized HDPE pipe fittings and accessories to support drainage projects managed by the Colquitt County Board of Commissioners in Georgia. The selected supplier will be responsible for providing pipe flares and 12 inch pipe bands that meet double wall corrugated HDPE pipe specifications, ensuring all materials are delivered directly to the designated project sites for use by prime contractors. The solicitation was posted on September 14, 2026, with a response deadline of October 14, 2026, at 3:30 PM. Classified under NAICS code 326112, this contract focuses on the procurement of essential infrastructure components to facilitate efficient drainage system installations within the county.

Colquitt County Board of Commissioners

POSTED

DEADLINE

Double Wall Corrugated HDPE Pipe SupplierThis subcontract agreement establishes a supplier for double wall corrugated high-density polyethylene HDPE pipe to support prime contractors on drainage projects for the Colquitt County Board of Commissioners in Georgia. The supplier is responsible for providing pipes in diameters ranging from 12 to 36 inches, available in lengths of 20 feet with a bell or 24 feet, ensuring all materials adhere to the specific requirements outlined in the bid packet. The contractor is tasked with the delivery of the specified HDPE pipe directly to the designated project sites. This opportunity was posted on September 14, 2026, with a response deadline of October 14, 2026, and falls under NAICS code 326112.

Colquitt County Board of Commissioners

POSTED

DEADLINE

PACK LINER, MAIN

Solicitation # SPE1C1-26-R-0079

Solicitation SPE1C1-26-R-0079 is a request for the manufacture and delivery of Pack Liner, Main (NSN 8465-01-613-1251) for the Defense Logistics Agency, Troop Support. The government intends to award two separate Indefinite-Delivery, Indefinite-Quantity (IDIQ) firm-fixed-price contracts. Lot 0001 is designated as a Small Business Set Aside, while Lot 0002 is unrestricted but includes a 10 percent HubZone price evaluation preference. The procurement follows a Best Value, Trade-Off source selection process where technical merit, specifically product demonstration models and hydrostatic testing, is significantly more important than price. The contract requires a three-year ordering period with a minimum order of 1,000 units per lot. Successful offerors must provide two product demonstration models with their initial proposal and deliver six first article test samples within 50 calendar days of award. The total delivery timeline is 210 days, including 120 days for final production delivery. Supplies must be packaged according to ASTM D3951 and MIL-STD-2073-1D, with a maximum of 40 items per shipping container and a strict prohibition on bulk packaging. Contractors must comply with CMMC level requirements and safeguard Controlled Unclassified Information. Invoicing and payment will be processed electronically through the Wide Area Workflow system. The government provides a warranty period of 365 days after acceptance, with inspection and acceptance occurring at the point of origin. Proposals must be submitted in two separate volumes, strictly separating technical data and product demonstration models from cost and pricing information.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Protective Plastic Tape Manufacturing and SupplyThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture and supply of protective plastic tape, identified by NSN 9390013828391. The contractor serves as the sole approved manufacturer, ensuring that all produced materials strictly adhere to required military specifications. The project is categorized under NAICS code 326112 and was posted on August 11, 2026. This agreement establishes the production and delivery requirements necessary to support agency operations through the provision of specialized protective taping materials.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

Solicitation # SPRMM126QKJ20

Solicitation SPRMM1-26-Q-KJ20, issued by DLA Mechanicsburg under emergency acquisition authority, seeks the manufacture and delivery of one chiller (NSN 7HH 4120-01-648-7162) for use on submarines and surface ships. The procurement will be awarded based on Lowest Price Technically Acceptable (LPTA) criteria. The item must be mercury-free and conform to the design and performance requirements specified in drawing 8243684. Contractors are required to maintain an ISO 9001 quality system and adhere to MIL-STD-973 for configuration management. Key requirements include strict adherence to MIL-STD-129 for marking and MIL-STD-2073 for packaging, with specific DLR labeling required for applicable items. Inspection and acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, as refurbished material is not acceptable. Administrative requirements include electronic submission of invoices and receiving reports via PIEE-WAWF and compliance with CMMC Level 1 cybersecurity certification.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Supply of SENSOR ASSY, ESM (P/N 7662247)This subcontract involves the supply of SENSOR ASSY, ESM units to prime contractors supporting DLA Maritime Mechanicsburg supply contracts. The required hardware must match Part Number 7662247 and NSN 7HH 2990 016110637, with the contractor responsible for verifying commercial status, availability, and providing standard commercial warranties. Managed under the Department of Defense through SPRMM1 DLA Mechanicsburg, the contract falls under NAICS code 334511. The place of performance is located in Tucson, with a response deadline set for October 12, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

29 SENSOR ASSY, ESM

Solicitation # SPRMM126QHF48

The Department of Defense, through DLA Mechanicsburg, has issued a sources sought notice under solicitation SPRMM126QHF48 for the procurement of three SENSOR ASSY, ESM units. The required items are identified by NSN 7HH 2990 016110637 and part number 7662247, with an approved design cage code of 53711. This notice is for informational purposes to conduct a market survey and does not constitute a request for proposal or a commitment by the government to award a contract. Interested sources must complete a market survey and submit it via email to David T. Serotkin by 11:59 AM EST on October 12, 2026. Any supplier that is not the Original Equipment Manufacturer must provide complete traceability information back to the OEM to avoid being deemed non-responsive. The survey seeks data on commercial status per FAR 2.101(b), delivery timelines, and the acceptability of FOB Origin and Inspection/Acceptance Origin terms to help the government develop a realistic future solicitation.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKER

Solicitation # SPRMM126QMJ38

Solicitation SPRMM1-26-Q-MJ38, issued by DLA Mechanicsburg and NAVSUP Weapons System Support, is a request for quotations for the manufacture and supply of circuit breakers (NIIN 015325564). The procurement is limited to original equipment manufacturers or their authorized distributors, who must provide proof of authorization on company letterhead. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) criteria, with the contracting officer utilizing the Supplier Performance Risk System to evaluate item, price, and supplier risks. The contract mandates strict adherence to military standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for preservation and packaging. Inspection and final acceptance are performed at the source, and the contractor is required to maintain all inspection records for 365 days following final delivery. All invoicing and receiving reports must be submitted electronically via the Wide Area Workflow (WAWF) system. Additional requirements include compliance with the Buy American-Balance of Payments Program, cybersecurity maturity model certification, and specific electrostatic protection standards where applicable.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPRMM126QMH73

Solicitation SPRMM126QMH73, issued by DLA Mechanicsburg, is a small business small purchase request for the manufacture and supply of Circuit Card Assemblies (NIIN 015287157). The procurement requires strict adherence to technical standards, specifically ANSI/ESD S20.20 for electrostatic discharge control and IPC J-STD-001 Class 3 for soldering. All items must be physically identified per MIL-STD-130 and packaged according to MIL-STD-2073-1, with specific requirements for ESDS protection and marking for Depot Level Repairables. Inspection and acceptance will occur at the source, and the contractor is responsible for maintaining all inspection records for 365 days following final delivery. The government will evaluate offers based on item, price, and supplier risk using the Supplier Performance Risk System. Offerors who are not the original equipment manufacturer must identify the OEM's cage code and part number, while authorized distributors must provide signed proof of authorization on company letterhead. All contractual documents are considered issued upon electronic transmission, and the resulting award will require the electronic submission of invoices and receiving reports via the Wide Area Workflow (WAWF) system. The solicitation also incorporates critical security and compliance clauses, including prohibitions relating to Chinese military companies and requirements for safeguarding covered defense information.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

in about 2 months

Solicitation # SPRMM126QHE97

This solicitation, issued by DLA Mechanicsburg, is for the manufacture of non-commercial inner drums, identified by Cage Code 53711 and part number 6181415. The procurement is being conducted using Lowest Price Technically Acceptable (LPTA) criteria. A recent amendment has extended the response deadline from September 18, 2026, to September 30, 2026. Contractors are required to adhere to strict quality assurance, packaging, and marking standards, including MIL-STD-130 for identification and MIL-STD-2073 for packaging. Interested vendors must provide the Original Equipment Manufacturer (OEM) details if they are not the manufacturer and are encouraged to register for the Electronic Data Access (EDA) web tool to monitor contract modifications. All invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) via the Procurement Integrated Enterprise Environment (PIEE). The contract includes specific provisions regarding cybersecurity maturity, small business subcontracting, and security prohibitions, and requires that any changes to production facilities be approved in writing by the Contracting Officer.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

in about 1 month

ROTOR,LOW PRESSURE

Solicitation # SPRMM126QGF02

Solicitation SPRMM1-26-Q-GF02, issued on October 1, 2026, by DLA Mechanicsburg, is a Firm Fixed Price request for the manufacture of a Low Pressure Rotor (NIIN 010255510). The item must conform to the design represented by Cage Code 90099, reference number 616F038H01. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with the Contracting Officer utilizing the Supplier Performance Risk System (SPRS) to evaluate item, price, and supplier risk. The procurement mandates Higher Level Inspection and requires the contractor to maintain a quality system compliant with ISO 9001. Key technical requirements include strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1 for packaging. The material is intended for use on submarines or surface ships and must be entirely free of metallic mercury contamination. All invoices and receiving reports must be submitted electronically via the Wide Area Workflow (WAWF) system. Offerors who are not the Original Equipment Manufacturer must provide the OEM's CAGE code and part number, as refurbished materials are strictly prohibited. Delivery is established as FOB Destination, and inspection and acceptance will occur at the point of origin.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

DEADLINE

TEST SET,FIRE CONTR

Solicitation # SPRMM127QKA03

Solicitation SPRMM127QKA03, issued by DLA Mechanicsburg, is a small business set-aside request for the manufacture of one Fire Control Test Set (NSN 7HH 4931-01-297-6091). The required item must conform to the design represented by Cage Code 53711, reference number 5974638. Award will be granted to the responsible offeror submitting the Lowest Price Technically Acceptable (LPTA) offer. Offerors acting as distributors must identify the Original Equipment Manufacturer and their CAGE code, and refurbished materials are strictly prohibited. The contract specifies FOB Destination delivery on an ASAP basis. Inspection and acceptance will occur at the origin, specifically at the contractor or subcontractor plant. Strict adherence to military standards is required, including MIL-STD-130 for physical identification, MIL-STD-2073 for packaging, and MIL-STD-129 for shipment and storage marking. All invoicing and receiving reports must be submitted electronically via PIEE-WAWF. Additionally, the contractor must maintain all inspection records for 365 calendar days following final delivery.

Other Electronic Component Manufacturing

POSTED

DEADLINE

CONTROL,I/O PLATE

Solicitation # SPRMM126QHF20

Solicitation SPRMM1-26-Q-HF20, issued on October 1, 2026, by DLA Mechanicsburg, is a request for quotations for the manufacture and delivery of Control, I/O Plates (NSN 5895-01-589-4170). This requirement is being solicited under FAR Part 18 Emergency Acquisition Flexibilities (EAF) Authority, with award evaluations based on the Lowest Price Technically Acceptable (LPTA) criteria. The contractor is required to maintain the total equipment baseline configuration and must adhere to Technical Data Package version O02. Authorized distributors must provide proof of authorization on company letterhead to be considered for award. The contract mandates strict quality and logistics standards, including physical identification per MIL-STD-129 and packaging according to MIL-STD-2073. Inspection and final acceptance will occur at the origin, specifically at the contractor's or subcontractor's plant, with the contractor remaining responsible for all inspection requirements and record maintenance for 365 days post-delivery. Invoicing and receiving reports must be submitted electronically via the Wide Area Workflow (WAWF) in PIEE. Key compliance requirements include Cybersecurity Maturity Model Certification, Buy American and Balance of Payments Program certifications, and the reporting of Unique Item Identifiers (UII) upon delivery.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKER

Solicitation # SPRMM126QMJ37

Solicitation SPRMM1-26-Q-MJ37, issued by DLA Mechanicsburg on October 1, 2026, seeks quotations for the manufacture and delivery of circuit breakers (NSN 5925-01-698-1199). The required items must conform to the designs represented by Cage Codes 11TY5 and 89946, reference number 91C1220G06. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations considering item, price, and supplier risk via the Supplier Performance Risk System. The procurement is a total small business set-aside under NAICS code 335313. Key requirements include physical identification per MIL-STD-130 and packaging in accordance with MIL-STD-2073-1. Inspection and acceptance will occur at the origin, specifically at the contractor or subcontractor plant. All invoicing and receiving reports must be submitted electronically through the Wide Area Workflow (WAWF) system. Offerors who are not the original equipment manufacturer must identify the OEM's Cage code and part number. Delivery is requested as soon as possible on a FOB Destination basis.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

TRANSDUCER,MOTIONAL

Solicitation # SPRMM126QHE73

Solicitation SPRMM1-26-Q-HE73, issued on October 1, 2026, by DLA Mechanicsburg and NAVSUP Weapons Systems Support, is a request for quotes for the manufacture and delivery of two Motional Transducers (NSN 6695-01-535-6450). The requirement is solicited under FAR Part 12 for commercial products and utilizes FAR Part 18 Emergency Acquisition Flexibilities. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria. The items must conform to the design represented by Cage Code 07482, reference number L44921P01, and must be physically identified according to MIL-STD-130 Rev N. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073 for preservation and MIL-STD-129 for marking. Inspection and acceptance are designated at the origin, specifically at the contractor's or subcontractor's plant. Invoicing and receiving reports must be submitted electronically via the PIEE-WAWF system. Offerors must provide their CAGE code and identify the Original Equipment Manufacturer if they are a distributor. Additionally, the contract incorporates critical cybersecurity requirements per DFARS 252.204-7012 and requires that at least 85 percent of the Navy shelf-life requirement remains upon receipt.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

DEADLINE

Electronic Hardware Quality Assurance TestingThis subcontract for Electronic Hardware Quality Assurance Testing involves performing independent functional testing and quality assurance on the Box Probe Interface for prime contractors supporting NAVSUP WSS Maritime projects. The scope of work requires conducting electrical tests, signal integrity checks, and design compliance verification against reference N150675-1 utilizing specialized equipment such as signal generators and oscilloscopes. The contractor must strictly adhere to the quality assurance requirements outlined in Section C and is responsible for delivering formal QA Test Reports and Certifications of Compliance. This opportunity is issued by the Department of Defense through DLA Mechanicsburg under NAICS code 541380, with a response deadline set for October 30, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS