Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of High-Temperature Polyester Composite Breather Material

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, managed by the Department of Defense under the agency Construction & Equipment MRO SVC I, requires the supply of 145 rolls of 10 OZ polyester composite breather material. The material must be manufactured or sourced in rolls measuring 60 inches wide by 50 yards long and must be capable of operating in autoclaves at temperatures up to 400 degrees Fahrenheit. This procurement supports prime contractors delivering DLA Troop Support supply contracts and is designated as a Total Small Business Set-Aside. The contractor is responsible for ensuring strict adherence to Critical Application Item specifications and must perform all marking and labeling of packaging in accordance with MIL-STD-129. Performance for this contract is centered at Tinker AFB. The solicitation was posted on September 17, 2026, with a response deadline of September 28, 2026, under NAICS code 314121.

General Info

DoD subcontract for 145 polyester composite breather rolls for Tinker AFB.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC IView Agency

NAICS

314121 - Curtain and Drapery MillsView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8E9-26-T-3862.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COMPOSITE BREATHER

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 17

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies 10 OZ Polyester composite breather material for prime contractors delivering DLA Troop Support supply contracts. Manufactures or sources material in rolls of 60" wide by 50 yards long capable of operating in autoclaves at 400°F (202°C). Performs marking and labeling of all packaging per MIL-STD-129. Ensures strict adherence to Critical Application Item specifications. Delivers 145 rolls of labeled and packaged composite breather.

Similar Contracts

Same NAICS industry code

Supply of Embroidered OCP Shoulder Sleeve InsigniaThis subcontract with C AND T SUPPLY CHAIN under the Department of Defense involves the fabrication and supply of 3,000 OCP shoulder sleeve insignia, identified by NSN 8455-01-652-7783. The items must be produced according to Type I, Style I, Class 2 specifications using industrial embroidery machinery with a minimum stitch count of 4,000 and include hook fastener tape backing. The opportunity is a total small business set-aside under NAICS code 314121. Eligible bidders must possess a valid CAGE code and provide certification that the items are domestic end products in compliance with the Buy American Act. The response deadline for this requirement is October 1, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Webbing Strap Manufacturer/Supplier (NSN 5340-00-182-9631)This subcontract involves the manufacture and supply of 80 webbing straps meeting NSN 5340-00-182-9631 specifications for prime contractors supporting DLA Land and Maritime supply contracts. The supplier must utilize industrial textile weaving and stitching equipment to produce the items and ensure strict adherence to the Berry Amendment and the Buy American Act regarding domestic sourcing. All deliverables must be marked and packaged according to MIL-STD-129, MIL-STD-130N, and RP001 standards, with delivery terms set as FOB Origin. To be eligible, the provider must maintain CMMC Level 2 certification. The performance of this contract is centered in Tracy, California, under NAICS code 314121 for the Department of Defense.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Burn-Trauma Dressing Sheet ManufacturingThis subcontract involves the manufacturing of medical-grade burn-trauma dressing sheets for prime contractors supporting Department of Defense medical supply contracts. The contractor is responsible for weaving and knitting a combed cotton and polyester blend fabric with a required thread count of 180 threads per square inch, fabricating the sheets to specific dimensions, and ensuring full compliance with Medical Marking Standard No. 1. The project is managed by the Medical Supply Chain MD Surg FSF and is designated for performance at Joint Base Lewis McChord. Interested parties must respond to the solicitation by September 22, 2026, under NAICS code 314121.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Tarpaulin Extension Set SupplierThis subcontract involves the manufacture and supply of one Tarpaulin Extension Set for prime contractors under DLA Land and Maritime supply contracts. The supplier is responsible for sourcing or producing the set in accordance with technical specifications for NSN 2540-01-723-6463, utilizing reinforced edges and heavy-duty waterproof fabrics. The project is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, with performance taking place at Fort Bliss. Delivery is handled FOB Origin via the First Destination Transportation program. The response deadline for this opportunity is September 28, 2026, and it falls under NAICS code 314121.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Theatrical Drapery Supplier and InstallerThis subcontract for Goodrich Area Schools involves the supply and installation of theatrical drapery for auditorium projects at both the high school and middle school. The selected provider must be an approved manufacturer or authorized representative responsible for removing existing stage curtains, managing their disposal or storage, and installing a new drapery package according to the Drawing TR-1 Schedule. The project is located in Goodrich, Michigan, with a response deadline of October 12, 2026. The scope of work requires the delivery of a complete, installed theatrical drapery package across two separate school auditoriums.

Goodrich Area Schools

POSTED

DEADLINE

Smoke Kit Accessory Supply (Pouches and Manuals)This subcontract for the Maritime Supply Chain within the Department of Defense focuses on the provision of non-chemical components for prime contractors on DLA supply contracts. The scope of work involves the manufacture of textile carrying pouches and the printing and binding of instruction manuals, as well as the sourcing of aspirator bulbs and tube openers. These deliverables are produced using textile manufacturing and commercial printing processes. The contract requires the delivery of 358 units each of carrying pouches, instruction manuals, aspirator bulbs, and smoke tube openers. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 314121. The solicitation was posted on September 10, 2026, with a response deadline of September 21, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Webbing Straps (NSN 5340-01-468-4264)This subcontract involves the supply of 50 specialized webbing straps for prime contractors supporting DLA Land and Maritime supply contracts. The contractor is responsible for manufacturing or sourcing straps that match Part Number SA-3483RC-1 and NSN 5340-01-468-4264, with all palletization and packaging strictly adhering to RP001 DLA Packaging Requirements for Procurement. The agreement is managed under the Department of Defense Land Supply Chain with a place of performance in New Cumberland, Pennsylvania. Classified under NAICS code 314121, the contract was posted on September 10, 2026, with a response deadline of September 21, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Window Treatment and Textile CleaningThis subcontract opportunity is for professional window treatment and textile cleaning services supporting prime contractors on US Air Force projects at Joint Base Anacostia-Bolling. The scope of work involves the general dry cleaning of all window treatments and textiles using industrial equipment and chemicals, followed by the delivery of the cleaned items. The project is managed by the Department of Defense under the 11th Contracting Squadron and is designated as a total Small Business Set Aside. Interested parties must respond by September 21, 2026, for this requirement categorized under NAICS code 314121.

FA7060 11TH Contracting Squadron Pk

POSTED

DEADLINE

Supply of 2.4 oz Polyester Quilted InsulationThis subcontract involves the sourcing and delivery of 2.4 oz Polyester Quilted Insulation for the Centralia Correctional Center under the Illinois Department of Corrections. The materials are specifically intended for the manufacture of coats and must meet all provided technical specifications. The contractor is required to provide certification ensuring that all supplied materials were not produced through forced labor exploitation. Performance of the contract takes place in Centralia, Illinois, under NAICS code 314121.

Centralia Correctional Center

POSTED

DEADLINE

Custom Sapele and Storm Sash FabricationThis subcontract involves the fabrication of custom window sashes for historical restoration projects managed by the Illinois Department of Natural Resources through the Office of Realty and Capital Planning. The scope of work requires the production of one 1-3/4 inch thick 4-lite arch top sash and one matching rectangular storm sash, both crafted from Sapele wood and utilizing linseed oil-based window putty for glazing to ensure adherence to historical profiles. The project is located in Bloomington, Illinois, and requires the delivery of two completed custom sashes to the site. This procurement falls under NAICS code 314121 and is intended for prime contractors overseeing the restoration efforts.

Office of Realty and Capital Planning

POSTED

DEADLINE

Integrated Patch Kit (IPK) SupplierThis subcontract opportunity with DLA Troop Support involves the manufacture and supply of flame-resistant integrated patch kits for prime contractors. The supplier must produce these kits in strict accordance with GL/PD-10-08B specifications, ensuring all materials are compatible with the IHWCU Type II Class 2 uniform. The project is designated as a Total Small Business Set-Aside under NAICS code 314121 and is managed by the Department of Defense. Performance for this contract is centered in Philadelphia, Pennsylvania, with the primary objective being the delivery of completed Integrated Patch Kits that meet all required safety and technical standards.

DLA Troop Support

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MRO SVC I

Same awarding agency

Supply of Disk Drive UnitsThis subcontract involves the supply of disk drive units for prime contractors supporting Department of Defense supply contracts. The provider must source hardware that meets strict government specifications, ensuring all items are marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E. Physical hardware and all associated technical documentation are to be delivered to DLA Distribution at Robins Air Force Base in Warner Robins, Georgia. Compliance requirements include adherence to NIST SP 800-171 for the protection of controlled unclassified information and the provision of safety data sheets as mandated by 29 CFR 1910.1200(g) for any hazardous materials. The opportunity was posted on September 18, 2026, with a response deadline of September 23, 2026, falling under NAICS code 334111.

Electronic Computer Manufacturing

POSTED

DEADLINE

Supply of Tubeaxial FansThis subcontract involves the supply of four tubeaxial fans, specifically part number 4140-01-350-1615, to prime contractors supporting DLA Troop Support supply contracts. The provider is responsible for manufacturing or sourcing the assemblies while ensuring strict compliance with the Buy American and Balance of Payments Program. The agreement requires the submission of CAGE code registration and comprehensive supply chain traceability documentation. Delivery of the units is specified as F.O.B. Origin, with the contract falling under NAICS code 335131 and the oversight of the Department of Defense.

Residential Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Supply of Plain Cylindrical Plug GagesThis subcontract involves the supply of precision-engineered plain cylindrical plug gages for prime contractors supporting DLA Troop Support supply contracts. The scope of work includes the manufacture or sourcing of gages under NSN 5220009817124, requiring strict adherence to technical tolerances and material standards suitable for MRO environments. Production must utilize precision machining and certified calibration equipment while remaining compliant with the Buy American Act. The contract is managed by the Department of Defense under the agency Construction & Equipment MRO SVC I, with performance taking place in New Cumberland, Pennsylvania. The project falls under NAICS code 334516 and requires the delivery of physical plug gages. The response deadline for this opportunity is September 23, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

DISK DRIVE UNIT

Solicitation # SPE8E9-26-T-3742

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

GAGE, PLUG, PLAIN CYL

Solicitation # SPE8E9-26-T-3308

Solicitation SPE8E9-26-T-3308, issued by DLA Troop Support Construction and Equipment MRO Service I, is a request for quotations for 13 plain cylindrical plug gages, identified by NSN 5220009817124. The requirement is for a critical application item and is not a small business set-aside, falling under NAICS code 334516. Delivery is required within 167 days after order with shipping terms set as FOB Origin. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. It specifically prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All quotes must be submitted via the DLA Internet Bid Board System.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E9-26-Q-0765

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Supplier of Aluminum Alclad Alloy 7075 SheetsThis subcontract, managed by the Department of Defense under Construction and Equipment MRO SVC I, involves the supply of 50 specialized Aluminum Alclad Alloy 7075 sheets. Each sheet must be 0.063 inches thick, 48 inches wide, and 144 inches long, featuring 0.0016 inches of cladding on both sides. These materials are intended for prime contractors fulfilling DLA Troop Support supply contracts, with the place of performance located at Tinker AFB. The supplier is required to adhere to strict military standards for delivery, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. The opportunity was posted on September 17, 2026, with a response deadline of September 28, 2026, falling under NAICS code 332431.

Metal Can Manufacturing

POSTED

DEADLINE

Supplier of NSN 8145015134630 (Shipping and Storage Container)This subcontract involves the supply of two shipping and storage containers under NSN 8145015134630 for prime contractors supporting DLA Troop Support projects. The contractor is responsible for delivering the units FOB Origin, ensuring all packaging adheres to ASTM D3951 and MIL-STD-129 standards, with palletization following RP001 DLA Packaging Requirements. The agreement requires strict adherence to the Buy American Act and the Berry Amendment, as well as a NIST SP 800-171 cybersecurity assessment. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332439 for the Department of Defense.

Other Metal Container Manufacturing

POSTED

DEADLINE

MIL-STD-2073-1E Compliant PackagingThis subcontract involves providing specialized protective packaging for prime contractors on DLA Troop Support projects, specifically for oversized aluminum sheets. The work must adhere to MIL-STD-2073-1E standards, utilizing industrial fiberboard, four-corner material protection, and full-coverage side edge protection to prevent damage during transit. The project is managed by the Department of Defense under the agency Construction & Equipment MRO SVC I, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on September 17, 2026, with a response deadline of September 28, 2026, falling under NAICS code 488410.

Motor Vehicle Towing

POSTED

DEADLINE

Anodized and Primed Aluminum Sheet SupplyThis subcontract involves the supply of 3,000 finished aluminum alloy metal sheets for prime contractors supporting DLA Troop Support projects. The required specifications for each sheet are 0.080 inches in thickness, 48 inches in width, and 96 inches in length. All sheets must undergo anodization and priming in accordance with ASTM D3933 standards. To qualify, the provider must possess anodizing tanks and priming equipment capable of meeting the specified ASTM D3933 requirements. The project is managed under the Department of Defense by Construction and Equipment MRO SVC I, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this opportunity is September 28, 2026.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Supply of Identification Markers (NSN 7690-01-342-3892)This subcontract involves the manufacture or sourcing of identification markers, specifically NSN 7690-01-342-3892 (Part Number SLEX32), for prime contractors under the Department of Defense. The contractor must ensure all items adhere to MIL-STD-129 marking and MIL-STD-2073-1E and RP001 packaging standards. Additionally, the provider is responsible for managing Type I (Code H) shelf life to guarantee that at least 85 percent of the shelf life remains upon delivery, while maintaining compliance with 29 CFR 1910.1200 and NAVSEA 5100-003D regulations. The scope of work requires the delivery of six units to Fort McCoy, Wisconsin. This opportunity falls under NAICS code 323117 and is managed by the Construction and Equipment MRO SVC I agency. Interested parties must respond by September 28, 2026.

POSTED

DEADLINE

Supply of Metal Sheets (NSN 9515002371910)This subcontract involves the manufacture and supply of 3,000 specialized metal sheets meeting NSN 9515002371910 specifications for prime contractors supporting DLA Troop Support. The provider is responsible for applying continuous identification markings and delivering the materials to depots at Hill AFB, Tinker AFB, and Warner Robins. Required documentation includes Metal Certification CDRLs and DD Form 1423s. The contract is managed under NAICS code 332322 for the Department of Defense. The solicitation was posted on September 17, 2026, with a response deadline of September 28, 2026. Performance is centered at Hill AFB, Oklahoma, and Georgia locations to support critical supply chain requirements.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS