Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Hot-Rolled Annealed Steel Bar Stock

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits the supply of 86,000 linear feet of hot-rolled, annealed, flat steel bar with a consistent cross-section of 1.250 inches thick by 1.500 inches wide, delivered in 10 to 12 foot lengths, with a permitted tolerance of plus or minus 10 percent. All material must meet stringent military and industry standards including MIL-STD-2073-1E for packaging, ASTM A700 for steel bar specifications, and DLA packaging requirements, with no preservation coating applied. The product is intended for delivery to the New Cumberland, Pennsylvania facility with a ZIP code of 17070-5002, and the contractor must comply with all specified material and packaging protocols without exception. This is a total small business set-aside subcontract under NAICS code 331110, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 16, 2026, with responses due by July 24, 2026, and is issued by the Department of Defense through the DDSP New Cumberland Facility. The contract is managed under the DLA’s procurement system and can be accessed via the provided DIBBS link, with no point of contact listed publicly. All offerors must be registered small businesses capable of fully meeting the technical, packaging, and delivery requirements outlined in the solicitation.

General Info

86,000 linear feet of hot-rolled steel bar, military specs, small business set-aside, delivery to New Cumberland, PA.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 86,000 linear feet (±10%) of hot-rolled, annealed, flat steel bar (1.250" thick × 1.500" wide, 10–12 ft lengths) compliant with MIL-STD-2073-1E, ASTM A700, and DLA packaging standards, with no preservation coating.

Similar Contracts

Same NAICS industry code

Domestic Specialty Metals and Biobased Product Compliance SupplierThis contract requires the supply of specialty metals and biobased materials that fully comply with DFARS regulations and the Buy American Act, ensuring all materials are domestically sourced to meet U.S. defense procurement mandates. The materials must also adhere to sustainability standards, reflecting a dual commitment to national security and environmental responsibility. The NAICS code 331110 indicates this pertains to iron and steel mills and ferroalloy manufacturing, underscoring the emphasis on domestic metallurgical production capabilities. The contract is structured as a subcontract under the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION and is open for response until August 17, 2026. All products must be manufactured and processed entirely within the United States to satisfy compliance requirements, with no allowance for foreign-origin content unless specifically exempted under applicable exceptions. Performance is expected to support defense systems and equipment across multiple military programs, and potential bidders must demonstrate proven capability in delivering certified domestic specialty metals and biobased alternatives that meet stringent quality, traceability, and regulatory compliance benchmarks.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

in about 1 month

Raw Material Supply for Fastener ProductionThe contract is for the supply of certified raw materials including alloy and stainless steel bar stock or wire form specifically suited for precision screw manufacturing, targeting the fastener production industry. These materials must meet stringent quality and certification standards to ensure compatibility with high-precision manufacturing processes. The solicitation is issued under NAICS code 331110, indicating a focus on steel product manufacturing from purchased steel, and is categorized as a subcontract, suggesting it is part of a broader supply chain supporting defense-related production needs. Performance is obligated at the location in New Cumberland with ZIP code 17070-5002, aligning with logistical and operational demands tied to Department of Defense facilities. The contract was posted on July 16, 2026, with a response deadline of July 24, 2026, allowing suppliers a limited window to submit proposals. The contracting entity is the ASC Commodities Division under the Department of Defense, indicating the materials will be used in defense or military applications requiring certified, high-integrity components. There is no set-aside designation, meaning all eligible suppliers may compete without restriction based on business size or category. Interested parties must access the full solicitation details through the provided DIBBS link to comply with all technical, certification, and delivery requirements outlined in the official document.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Raw Materials and Sub-Components for Brake CaliperThe contract involves the supply of raw materials and sub-components essential for the manufacturing of brake calipers, including cast iron, steel, rubber seals, and stamped metal parts. All materials must comply with environmental regulations and be free of Class I ozone-depleting chemicals, ensuring alignment with federal sustainability and safety standards. The solicitation is structured as a subcontract under NAICS code 331110, indicating a focus on integrated steel mill production, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is required to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all responses must be submitted by July 27, 2026, following a posting date of July 16, 2026. The procurement is open without set-aside provisions, and the opportunity is accessible through the DIBBS platform for qualified suppliers seeking to engage with defense supply chains.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Raw Materials for Fastener ProductionThe contract calls for the supply of high-strength, corrosion-resistant alloy steel and specialty metals specifically certified and traceable to approved mills for use in the manufacturing of defense-grade fasteners. All materials must meet stringent military and industrial standards for performance, consistency, and integrity, with full documentation of mill certifications and material traceability required to ensure compliance with defense supply chain security protocols. The materials are intended for critical applications where failure is not an option, necessitating strict adherence to quality control and verification procedures throughout the production and delivery process. Performance of this subcontract is centered in Tracy, California, with a response deadline of July 24, 2026, and the solicitation was posted on July 16, 2026. The contracting entity is the ASC Commodities Division under the Department of Defense, operating under NAICS code 331110 for steel mill products. Suppliers must be prepared to demonstrate capacity, reliability, and compliance with defense procurement regulations, as the materials will feed directly into high-priority defense systems. Failure to meet traceability, material specification, or delivery requirements may result in contract termination or denial of payment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Raw Materials (Steel, Alloy, Coatings)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Forged Zinc-Coated Chain Shackle ManufacturingThe contract is for the full-scale manufacturing of forged carbon steel chain shackles with zinc coating, encompassing all critical production stages including forging, heat treatment, testing, and packaging, all in strict accordance with Defense Logistics Agency standards. The work must meet precise technical and quality requirements to ensure durability, safety, and compliance with military specifications for operational use. The solicitation is classified as a subcontract under NAICS code 331110, issued by the ASC Commodities Division of the Department of Defense, with performance required at New Cumberland, Pennsylvania, 17070-5002. Interested parties must submit responses by the deadline of July 24, 2026, and the opportunity was posted on July 16, 2026. While no set-aside criteria or point of contact are specified, the requirement emphasizes full manufacturing capability and adherence to DLA protocols, indicating the need for a qualified vendor with proven experience in defense-grade metal component production.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Corrosion and Heat-Resistant Metal Bar SupplyThe contract calls for the supply of twenty units of solution heat-treated, descaled steel bars engineered for superior corrosion and heat resistance, each measuring 0.500 inches in diameter and ranging between 10 and 12 feet in length. These bars must meet stringent military compliance standards for packaging and labeling, ensuring proper identification, handling, and traceability throughout the logistical chain. Delivery must align with all required military specifications, including secure and standardized containment methods to preserve material integrity during transit. This is a subcontract issued under the NAICS code 331110, indicating its classification within the primary metals industry, and is managed by the Department of Defense through its Construction & Equipment MRO SVC I agency. The solicitation was posted on July 16, 2026, with a firm response deadline of July 23, 2026, leaving a one-week window for potential suppliers to submit proposals. The performance location and point of contact are unspecified, but the contract is accessible through the DIBBS platform for further details and submission. Compliance with military-grade requirements for material, packaging, and delivery is non-negotiable and central to qualification.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Steel Bar Supply – Hot Rolled, Annealed, Pickled Steel (303SE)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Raw Materials and Specialty MetalsThe contract calls for the supply of military-grade steel alloys and aluminum materials essential for the fabrication of defense components, requiring full traceability from origin to delivery and strict adherence to federal standards governing defense-related metallurgy. All materials must meet rigorous specifications for composition, mechanical properties, and quality assurance to ensure reliability in high-stress military applications. The performance location is designated as New Cumberland, Pennsylvania, with all deliveries expected to comply with the Defense Logistics Agency’s operational requirements. This subcontract opportunity is open for response until July 27, 2026, and is classified under NAICS code 331110, indicating primary involvement in iron and steel mills and fermentation operations, though the scope is narrowly focused on specialty metal supply for defense purposes. The contract is issued under the Department of Defense’s Land Supplier Operations Vehicle Support division, reflecting its critical role in sustaining armored vehicle and land-based defense systems. Suppliers must be prepared to provide comprehensive documentation proving compliance with all applicable defense regulations and demonstrate capacity for consistent, high-volume delivery with secure chain-of-custody protocols.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of SAE 4130 Alloy Steel Bar StockThe contract requires the supply of 224 feet of cold-drawn, normalized square bar stock made from SAE 4130 alloy steel, with a tolerance of plus or minus 10 percent in length. This material must fully comply with the technical and quality standards established by the Defense Logistics Agency, ensuring adherence to stringent military-grade specifications for mechanical properties, dimensional accuracy, and surface finish. The bar stock is intended for use in defense-related applications and must be produced and tested to meet the rigorous demands of the Department of Defense. The solicitation, issued under the NAICS code 331110 for iron and steel mill and ferroalloy manufacturing, is classified as a subcontract and was posted on July 16, 2026, with a response deadline of July 24, 2026. Performance of the contract is designated to take place at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The contracting activity originates from the Warner Robbins office of the Department of Defense, and all submissions must be directed through the provided DIBBS platform to ensure proper processing and evaluation.

POSTED

DEADLINE

Specialized Material Supply for Spindle ManufacturingThe contract is for the supply of high-strength alloy or specialty material required for spindle fabrication, adhering strictly to detailed engineering drawings. The materials must meet aerospace-grade or tool steel specifications with full certification and complete traceability to ensure compliance with performance and safety standards. This is a subcontract under the NAICS code 331110, issued by the Department of Defense through its LAND SUPPLY CHAIN organization, with performance required at the facility located in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 16, 2026, and bids must be submitted by July 27, 2026. The material must be delivered in full compliance with all technical and documentation requirements to support precision manufacturing processes in defense-related applications.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Material Supply – Specialty Alloy Stock (AMS5517)The contract seeks the supply of raw stainless steel sheet and strip material meeting the AMS5517 specification for the fabrication of compressor blade locks, a critical component in aerospace applications. The material must adhere strictly to the mechanical, chemical, and dimensional requirements defined in AMS5517 to ensure performance and reliability under high-stress operational conditions. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 16, 2026, and responses are due by July 24, 2026, leaving a limited window for qualified suppliers to submit proposals. The NAICS code 331110 indicates this falls under the primary metal manufacturing sector, aligning with the production and processing of specialty alloys. While no set-aside designation is specified, the contract is open to eligible subcontractors capable of meeting the stringent material standards and delivery timelines required for defense-related manufacturing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Hazardous Material Compliance and LabelingThe contract titled Hazardous Material Compliance and Labeling requires the preparation of hazard warning labels and Material Safety Data Sheets in strict accordance with DFARS 252.223-7001 and OSHA hazard communication standards. This subcontract is issued by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY and is performance-based at the location in NEW CUMBERLAND, Pennsylvania, with a zip code of 17070-5002. The work falls under the NAICS code 541690, indicating it involves other scientific and technical consulting services, specifically focused on regulatory compliance for hazardous materials. All deliverables must meet federal defense and occupational safety requirements to ensure proper identification, handling, and communication of chemical hazards to personnel and stakeholders. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026, indicating a tight turnaround timeframe for qualified vendors. The contract is not set aside for any specific small business category, and no point of contact is listed in the provided details. Interested parties must access the full solicitation through the official DIBBS system via the provided UI link to ensure full compliance with submission procedures and technical specifications. Success in this contract depends on precise adherence to labeling formats, MSDS content, and regulatory alignment with both DOD and OSHA mandates, with noncompliance potentially leading to rejection or contract termination.

Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

Compliant Packaging, Marking, and LogisticsThe contract requires precise packaging and marking of brass sheets in full compliance with MIL-STD-129R standards, ensuring all items are properly labeled with the National Stock Number, applicable specifications, manufacturer information, and specific heat or lot numbers for traceability. Hazard labels must be applied to meet Department of Defense Logistics Agency requirements, ensuring safe handling and regulatory adherence throughout the supply chain. All work must be executed to support DLA compliance, with attention to detail in labeling accuracy, label placement, and documentation alignment. The contract is categorized as a subcontract under NAICS code 561910 and is associated with the Department of Defense’s DDSP NEW CUMBERLAND FACILITY, with performance obligations centered at the location in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026, providing a seven-day window for submissions. The contract emphasizes logistical readiness and regulatory precision, requiring suppliers to meet strict defense packaging norms without exception.

Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

Quality Certification and Mill Testing ServicesThe contract requires independent metallurgical testing and certification of brass sheets to confirm compliance with Alloy 464 and MIL-C-3993C specifications, ensuring material integrity and adherence to military standards. Each shipment must be accompanied by a Certificate of Quality Compliance, issued upon successful verification of chemical composition, mechanical properties, and dimensional conformity. The work is to be performed as a subcontract under the NAICS code 541380, with performance location specified at NEW CUMBERLAND, PA, 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026. The contracting entity is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, indicating this effort supports defense-related manufacturing and supply chain requirements.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Manufacturing of Naval Brass Sheet (Alloy 464, 1/2 Hard Temper)The contract calls for the fabrication of Naval Brass Sheet conforming to Alloy 464 in a 1/2 Hard temper, with precise dimensions of 0.0320-inch thickness, 24.00-inch width, and 48.00-inch length. All manufacturing processes including melting, rolling, and final cutting must adhere to military specifications to ensure material integrity and performance. Quality control procedures are required throughout production to validate compliance with dimensional tolerances and mechanical properties specified for the alloy. The work must be performed at the DOD facility in New Cumberland, Pennsylvania, with the ZIP code 17070-5002 as the designated place of performance. The solicitation is classified as a subcontract under NAICS code 331492 and was posted on July 17, 2026, with a response deadline of July 24, 2026. The contracting agency is the Department of Defense through its DDSP New Cumberland Facility, indicating this is part of a larger defense supply chain requiring certified materials and strict adherence to technical standards.

Secondary Smelting, Refining, and Alloying of Nonferrous Metal (except Copper and Aluminum)

POSTED

about 17 hours ago

DEADLINE

SHEET, METALThe contract specifies the procurement of 15 sheets of brass naval metal, each measuring 0.0320 inches in thickness, 24.00 inches in width, and 48.00 inches in length, with a nominal weight of 11.20 pounds per sheet. The material must conform strictly to the dimensional requirements, with no test coupons permitted, and all sheets must be supplied in whole-foot lengths only. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory; only suppliers listed on the QSLD are eligible for award, and any deviation or use of non-approved distributors constitutes an unauthorized substitution that may trigger criminal penalties. The material must be supplied with a Certificate of Quality Compliance, which must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification number, alloy grade, manufacturer’s name, heat and lot number, and exact dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging requirements, including robust edge and corner protection, full-side coverage, and use of specified wrapping materials to prevent surface damage. The product must meet technical and quality standards referenced in the DLA Master List, including MIL-C-3993C and QAP 13873, and is subject to destination inspection and acceptance. The contract is firm fixed price with zero variance allowance, and delivery is required within 105 days after order date to the DLA Distribution facility in New Cumberland, Pennsylvania. All documentation and compliance are governed by DLA guidelines, and the QSL program waives certain inspection requirements for approved suppliers, except in foreign military sales cases.

Sheet Metal Work Manufacturing

POSTED

about 17 hours ago

DEADLINE

BATTERY POWER SUPPLYThis contract pertains to the procurement of three battery power supplies identified by NSN 6130-01-714-2899 and manufacturer part number KSM102430, supplied by KOLD-BAN INTERNATIONAL LTD. The item is classified as a TYPE I shelf-life code S item with a strict, non-extendable shelf life of 60 months, governed by RS023. All technical and quality requirements referenced by R or I numbers are defined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply fully with DLA Packaging Requirements for Procurement and MIL-STD-2073-1E, including specific preservation methods, materials, and containment standards. Marking follows MIL-STD-129 with no special codes, and palletization adheres to RP001. Sampling inspection standards require zero non-conformances using MIL-STD-1916, ASQ H1331, or equivalent zero-based plans, with acceptance levels aligned to critical, major, and minor attributes as defined by the contract. Physical identification and hazardous communication requirements are also enforced per RQ017 and RQ034. The contract is a Firm Fixed Price agreement with a 0% quantity variance, meaning no adjustments to the ordered three units are permitted. Delivery must occur within 183 days after the award date, with origin FOB and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The item is destined for a single federal delivery point, and transportation logistics are governed by DLA procedural notes C19 and C20. The requirement is issued under solicitation SPE7L7-26-Q-2036, with a response deadline set for July 27, 2026, and a material need date of February 8, 2027. Covered Defense Information provisions may apply, and all items must be free from government identification before shipment if not accepted. The unit of issue is each, consistent with DoD standards, and pricing details remain unspecified in the document.

Battery Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, PRESSURE REDUThe contract is for the procurement of two pressure reduction valves with NSN 4820-01-732-9190 under solicitation SPE7MC-26-T-9277, with a delivery requirement of 94 days after award. The item is classified under NAICS code 332911 and is being procured by the Department of Defense through the DLA New Cumberland Facility. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The contract mandates compliance with DLA packaging standards and prohibits the use of Class I ozone-depleting chemicals in the product, overriding any conflicting specification requirements unless an approved substitute is provided. Export control requirements apply due to the presence of technical data subject to ITAR or EAR, and access is restricted to contractors with JCP certification, completed DOD export control training, and DLA authorization. The contractor must adhere to DFARS 252.225-7048 for export-controlled data handling and must remove government identification from non-accepted supplies. The solicitation also requires CMMC Level 2 certification for any third-party assessment organizations involved, and covered defense information provisions are applicable. All communications and documentation must be directed to the designated point of contact, Paula McClary, at the provided DLA email and phone number.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

IMPELLER, FAN, AXIALThe contract pertains to the procurement of an axial fan impeller with part number BD1-9642-1 and NSN 4140-01-308-6651, requiring five units to be delivered within 167 days of contract award, with delivery terms specified as FOB origin and inspection and acceptance occurring at destination. The supplier must comply with stringent packaging and labeling directives including MIL-STD-2073-1E for preparation, MIL-STD-129 for marking, and DLA’s packaging requirements, with no tolerance allowed for quantity variance. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and are binding per the version in effect on the solicitation issue date. The item is designated as a critical application item, and government identification must be removed from non-accepted supplies. Packaging must adhere to the prescribed unit of issue, palletization standards, and special handling codes, with the delivery destination clearly defined as the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation was issued under contract number SPE8E7-26-T-3139 with a response Deadline of July 22, 2026, and a required ship date of December 21, 2026, while the original delivery window extends to June 11, 2027. The contracting office is the Department of Defense’s DDSP New Cumberland Facility, with Kelly Mitchell as the primary point of contact.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

CONVERTER, DIRECT CU

POSTED

about 17 hours ago

DEADLINE

REEL ASSEMBLY, HOSEThe contract is for the procurement of two Reel Assembly, Hose units with NSN 4210-01-508-0874 and part number A31170033, under solicitation SPE8E6-26-T-3585, issued by the Department of Defense through the DDSP New Cumberland Facility. The delivery is scheduled for 156 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. The unit price is $2.00 per unit, totaling $4.00 for the order, with no variance allowed in quantity. All packaging must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must follow MIL-STD-129 for marking and labeling. If the item is classified as hazardous per Fed-Std-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization must adhere to RP001 DLA packaging requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is December 21, 2026, with an original delivery deadline of January 2, 2027. Transportation procedures are governed by DLAD Proc Notes C19 and C20. The item is designated as a critical application item, and all government identification must be removed from non-accepted supplies. The contract incorporates mandatory technical and quality specifications referenced by R and I numbers from the DLA Master List, with the revision in effect on the solicitation issue date controlling compliance.

All Other Miscellaneous Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, SOLENOIDThe contract is for the procurement of three solenoid valves identified by NSN 4810-66-158-0348 under purchase request 7017236074, with a delivery requirement of 161 days after award. The solicitation number is SPE7MC-26-T-099W, issued on July 17, 2026, with responses due by July 22, 2026, and is classified under NAICS code 332911 for industrial machinery and equipment manufacturing. The contracting activity is the DDSP New Cumberland Facility under the Department of Defense, with performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The primary point of contact is Paula Mcclary, reachable via email fmda3302@dla.mil or phone 6146920417. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless an amendment supersedes it. Any non-accepted supplies must have government identification removed in accordance with RQ011 requirements.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, SOLENOID

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE