This Government Contract opportunity from Tennessee was posted on July 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Industrial Sanding Disks (4-1/2" x 7/8", 60-Grit, Flap-Type)

Closed

State & Local

Submission Closed07/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332996

New

DIBBS

SLEEVE, COMPRESSION, TUB

Solicitation # SPE7M2-26-T-6650

This contract is for the procurement of 788 compression sleeves for tube-hose fittings, identified by NSN 4730-01-008-5969 and part number SAE J514-2 6 080115SA. The items are classified as critical application items and must adhere to SAE J514-2 Revision D standards. The agreement specifies a delivery timeframe of 81 days after order, with a required delivery date of April 24, 2027, and shipping destined for the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates strict compliance with DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129. A significant environmental restriction is placed on the use of mercury, prohibiting its intentional addition to hardware except in specific functional cases approved by NAVSEA. The procurement is conducted under full and open competition and includes specific guidelines for configuration change management and the removal of government identification from non-accepted supplies.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE4A0-26-T-4602

This contract is for the procurement of three machine bolts, identified by NSN 5306012678599 and CNH Industrial America LLC part number L113554. The agreement, under solicitation number SPE4A0-26-T-4602, specifies a delivery timeframe of five days after order and a required delivery date of August 27, 2026. Shipping is set as FOB Origin, with the final destination and inspection point located in Latham, New York. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, excluding parcel post.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-379H

This solicitation, identified as SPE7M4-26-T-379H, is a request for a metal tube assembly under NAICS code 332996 for the Department of Defense Fluid Handling Division. Offerors are required to provide details regarding current dealer or distributor certification and accreditation by selecting the other equivalent option. Due to potential fluctuations in demand, bidders are highly encouraged to submit quantity ranges to allow for administrative flexibility during the award process. It is important to note that Fast Pay does not apply to this solicitation and that additive manufacturing is generally prohibited unless specifically authorized by the contracting officer. Compliance with domestic material restrictions, including the Berry Amendment and the Buy American Act, is mandatory, and any use of non-domestic materials must be disclosed. Offerors must also certify that they will not provide covered telecommunications equipment or services in accordance with federal regulations. Regarding logistics, all DLA contractors must register through the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. For those unable to meet the initial closing date, submitting a no-bid quote with an anticipated quote date is recommended to signal intent to the buyer.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-8788

This solicitation from the Department of Defense Fluid Handling Division is for the procurement of one tube reducer, identified by NSN 4730-01-470-8641. The contract requires delivery within 20 days after the order is placed and is associated with solicitation number SPE7M3-26-T-8788. Performance will take place at Mountain Home AFB. Strict compliance is required for DLA packaging standards and cybersecurity protocols, specifically CMMC Level 2 certification. Because the item involves covered defense information and technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory export control training to access the necessary technical data.

FLUID HANDLING DIVISION

POSTED

DEADLINE

ADAPTER, STRAIGHT, PIPE

Solicitation # SPE7M3-26-T-8781

This contract is for the procurement of two Monel straight pipe-to-tube adapters, identified by NSN 4730008530774 and part number 4-202242-1-24 from Hydrasearch Company, LLC. The order is managed by the Department of Defense Fluid Handling Division under solicitation SPE7M3-26-T-8781, with a required delivery date of August 28, 2026, and a delivery timeframe of 20 days. The items are to be delivered FOB destination to the USS Halsey DDG 97. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements RP001. The contract specifies a zero percent quantity variance and requires shipment via the fastest traceable means, explicitly prohibiting the use of parcel post.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M2-26-T-6630

This solicitation is for the procurement of 10 pipe elbows under part number 4730-00-181-8513 for the Nuclear Reactor Program within the Department of Defense. The items must be produced using a metal casting process, which requires specific tooling. Delivery is required within 20 days after receipt of the order. Compliance requirements include adherence to DLA packaging standards and CMMC Level 2 certification. Because the technical data is subject to ITAR and EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete required training to access the data. Interested parties should contact the Aviation or Land and Maritime supply chain teams for sourcing and tooling assistance.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

COUPLING HALF, SELF-SEA

Solicitation # SPE7M0-26-T-069Y

This contract, identified as SPE7M0-26-T-069Y, is for the procurement of five self-sealing coupling halves under NSN 4730123568872. The order is issued by the Department of Defense Maritime Supply Chain ESOC Buys and specifies parts from MTU Friedrichshafen GmbH or Atlas GmbH. Delivery is required within five days after order, with a required delivery date of September 2, 2026. The shipment must be delivered FOB Origin to the DLA LMP Zone 1 facility in Texarkana, Texas, using the fastest traceable means. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Technical and quality standards are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M0-26-T-067Y

This contract is for the procurement of one hose tee, identified by NSN 4730014772877 and part number 7448121205 from Grove U.S. LLC. The order is managed under solicitation number SPE7M0-26-T-067Y with a required delivery date of September 2, 2026, and a delivery timeframe of five days after order. The item is to be delivered FOB Origin and will be inspected and accepted at the destination, which is Camp Lemonnier in Djibouti. Compliance requirements include adherence to DLA packaging standards RP001 and ASTM D3951, with marking and labeling following MIL-STD-129. The contract strictly prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of the item. Technical and quality requirements are governed by the DLA Master List, and any substitute chemicals must be submitted for official approval.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE7M3-26-T-8791

This contract, identified as SPE7M3-26-T-8791, is a solicitation from the Department of Defense Fluid Handling Division for one pipe elbow. The item is identified by NSN 4730-01-473-0910 and Cummins Power Generation Inc. part number 505-0050. The required delivery date is September 3, 2026, with a delivery timeframe of 20 days after order. Shipping is set as FOB Origin, with inspection and acceptance occurring at the destination. The item must be delivered to the US Army A Co 501st DSB in Drawsko Pomorskie, Poland, via the fastest traceable means. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA master list technical and quality requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

CLAMP, PIPE, ANCHOR AND

Solicitation # SPE7M0-26-T-067N

This contract, identified as SPE7M0-26-T-067N, is a procurement request from the Department of Defense for one unit of a water tank distributor, specifically Caterpillar Inc part number 3G3421 and NSN 4730011891083. The delivery is required within five days after the order, with a required delivery date of September 2, 2026. The shipment is destined for the US Army AWCF SSF at Fort Campbell, Kentucky, and must be sent via the fastest traceable means, excluding parcel post. The agreement mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that inspection and acceptance will occur at the destination. Terms include a zero percent quantity variance and FOB Origin shipping.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

ELBOW, FLANGE TO PIPE

Solicitation # SPE7M0-26-T-067U

This contract is for the procurement of two flange to pipe elbows, identified by NSN 4730-01-308-7179 and Electric Boat Corporation part number 2621-166-02 piece 193. The order is managed under solicitation SPE7M0-26-T-067U with a required delivery date of September 2, 2026, and a delivery timeframe of five days. Shipping is set as FOB Origin with inspection and acceptance occurring at the destination in Raleigh, North Carolina. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, specifically requiring bags to be fabricated according to MIL-B-117. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components approved by NAVSEA. All shipments must be sent via the fastest traceable means, explicitly excluding the use of parcel post.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

STRAINER ELEMENT, SEDIM

Solicitation # SPE7M3-26-T-8782

This contract is for the procurement of four sediment strainer elements designed for use in turbine steam pumps. The items are identified by NSN 4730008892429 and correspond to several Curtiss-Wright Electro-Mechanical part numbers, including 63488 and LH63611PC4.5. Marking requirements mandate that the national stock number and manufacturer trademark be legibly etched on a noncritical surface in accordance with MIL-STD-130. The agreement specifies a delivery timeframe of 20 days after order, with shipping handled FOB Origin to the US Army at Fort Bliss, Texas. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination. This is a total small business set-aside solicitation issued by the Department of Defense Fluid Handling Division.

FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

Nashville Electric Service is seeking to procure sixty units of industrial flap sanding disks in the exact OEM specifications from either Weiler or Norton. Each disk must measure 4-1/2 inches in diameter with a 7/8-inch arbor hole and be rated at 60-grit for use in grinding and sanding metals, wood, plastics, and stainless steel. Only authentic, manufacturer-certified part numbers from these two approved suppliers will be accepted to ensure compatibility and performance standards. The solicitation was posted on July 1, 2026, with responses due by 7:00 PM on July 8, 2026, under a subcontract type classification. The North American Industry Classification System code for this procurement is 332996, indicating it falls under Other Miscellaneous Fabricated Metal Product Manufacturing. Performance of the contract is expected to occur in Nashville, Tennessee, and interested vendors must submit proposals via the designated portal at the provided online link.

General Info

Nashville Electric Service seeks 60 OEM-spec 4.5-inch 60-grit sanding disks from Weiler or Norton by July 8, 2026.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

This scope was carved out of Z4704.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Sanding Disk

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 1

subcontract

Response DeadlineJul 8

Deadline has passed

Submission Closed

07/08/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTennessee → Nashville Electric Service

ContactsNo contacts available

OfficeN/A

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Procurement of 60 units of industrial flap sanding disks for grinding and sanding metals, wood, plastics, and stainless steel. Must be exact OEM part numbers from Weiler or Norton.