Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Laminated Reeded Door Glass (28-3/8" x 65-1/2")

Active

State & Local

Response Deadline08/06/2026, 02:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Twelve units of tempered laminated door glass are being sourced, each measuring 28-3/8 inches wide by 65-1/2 inches high, with a specific 1/8 inch Box Cross Reeded finish designated as WGG26, laminated to a 5/32 inch clear annealed glass layer bonded with a 0.90 mil clear interlayer, resulting in a total thickness approaching 25/64 inch. The contract is issued as a subcontract under NAICS code 327215 by the State of West Virginia, with a response deadline of August 6, 2026, at 2:30 PM, and the goods are to be delivered to Charleston, West Virginia. The solicitation was posted on July 22, 2026, and all bids must comply with the exact dimensional and material specifications to meet performance and safety requirements for the intended application.

General Info

Twelve tempered laminated glass units, WGG26 finish, delivered to Charleston, WV by August 6, 2026.

Agency

West VirginiaView Agency

NAICS

327215 - Glass Product Manufacturing Made of Purchased GlassView NAICS

Place of Performance

Charleston, WV, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 02:30:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyWest Virginia

ContactsNo contacts available

OfficeN/A

Organization / Agency

West Virginia

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of twelve units of tempered laminated door glass: 28-3/8" wide × 65-1/2" high, 1/8" Box Cross Reeded (WGG26), laminated to 5/32" clear annealed glass with 0.90 clear interlayer, total thickness close to 25/64".

Similar Contracts

Same NAICS industry code

GLASS, LAMINATED

Solicitation # SPE8E5-26-T-3755

The contract specifies the procurement of laminated glass with a thickness of 0.265 inches, allowing a tolerance of plus or minus 0.03 inches, and requires the glass to be light green in color. The material is identified by NSN 9340011714428 and Part Number 123268D, with technical specifications governed by reference drawings and revisions dated 02/01/1984 and 06/26/2023. Only approved sources—Omni Glass & Paint, Inc., Laminated Glass Corp., and Wheeler Fleet Solutions, Co.—are eligible, and any offeror not listed must obtain prior OEM source approval, submitting documentation including technical data or certification of prior approval to DLA. All units must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking, with mandatory labeling stating "GLASS DO NOT DROP" per packaging instruction AK011714428 and special marking code 36 indicating fragility and orientation. The glass must be palletized per DLA packaging requirements, and no government identification may be removed from non-accepted supplies. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all technical and quality requirements are tied to the DLA Master List. Delivery is FOB origin with zero quantity variance, inspection and acceptance occurring at destination, and units must meet the specified delivery timelines of 160 days from award. The total quantity ordered is 352 units, split across three CLINs with delivery dates ranging from June 2026 to July 2027, shipped to three distinct DLA distribution facilities in Georgia, Pennsylvania, and California. The contract is issued under solicitation SPE8E5-26-T-3755, with point of contact Nafis Beyah and NAICS code 327215 for glass manufacturing.

ALBANY TRANSPORTATION OFFICER

POSTED

about 19 hours ago

DEADLINE

Supply of Precision Glass Tubing with Military-Compliant PackagingThe contract calls for the supply and delivery of one unit of precision glass tubing designated by NSN 9340-01-477-8948, with all packaging, preservation, and delivery requirements meeting strict military standards. The item must be furnished in full compliance with defense-specific protocols to ensure integrity during transit and handling, reflecting the high-stakes operational environments where such components are deployed. The procurement is classified as a subcontract under NAICS code 327215, managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 29, 2026, with a response deadline set for August 10, 2026, providing interested parties a 12-day window to submit proposals. Delivery is to be made to a military address with a FPO designation and ZIP code 96662, indicating deployment to a remote or overseas operational theater. The contract is accessible through the DIBBS portal, and while no point of contact is listed, all inquiries must adhere to the official submission guidelines tied to the referenced solicitation.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3735

This contract, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3735, specifies the procurement of one unit of glass tubing with NSN 9340-01-477-8948, to be delivered FOB destination within 20 days of award. The item is subject to strict packaging requirements mandated by MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, containment codes, and no special marking. All packaging must comply with DLA’s packaging requirements and be palletized accordingly. The supply is intended for shipment to USS CHUNG HOON DDG 93 at FPO AP 96662, with transportation governed by DLAD Procurement Notes C19 and C20. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the tubing or its contact surfaces, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined based on the acquisition type and solicitation amendment history. The quantity is fixed at one unit with zero variance allowed, and inspection and acceptance occur at the destination. The supplier, BUNN-O-MATIC CORPORATION, must adhere to all government-specified delivery, marking, and compliance standards.

Defense Logistics Agency

POSTED

DEADLINE

Manufacturing of Nonmetallic Protective SheetsThe contract involves the manufacture of nonmetallic protective sheets that must meet all technical standards set by the Defense Logistics Agency, with strict adherence to specified material and performance criteria. The contractor is responsible for the proper handling and disposition of any materials that do not meet acceptance requirements, as well as the complete removal of all government identifiers from finished products to ensure compliance with security and operational protocols. All work must be performed in accordance with the relevant technical specifications and delivered to the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation, classified as a subcontract under NAICS code 327215, was posted on July 28, 2026, with a response deadline of August 10, 2026. The contracting entity is the DDSP New Cumberland Facility under the Department of Defense, and no set-aside provisions are indicated. The contract details do not specify a point of contact, but all proposals must be submitted through the official DIBBS platform using the provided UI link. The terms require full compliance with defense logistical and manufacturing regulations, emphasizing quality control, regulatory adherence, and secure handling procedures throughout the production lifecycle.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

SHEET, NONMETALLIC, P

Solicitation # SPE8E5-26-T-3722

The contract pertains to the procurement of nonmetallic protective sheeting under NSN 9390-01-557-0832, with a quantity of 41 units at a unit price of $41.00, totaling $1,681.00. Delivery is required within 61 days from the contract award, with FOB origin terms, and inspection and acceptance both occur at the destination. The material must be packaged in strict compliance with DLA’s RP001 packaging requirements and MIL-STD-129 labeling standards, and if not classified as hazardous under FED-STD-313, it must conform to ASTM D3951 commercial packaging; however, any conflicting DLA Master List technical and quality requirements take precedence. The item is not acceptable as surplus government property, and any government identification must be removed from non-accepted supplies. Packaging must be palletized per DLA guidelines, and the specified delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The shipping and delivery timelines are tightly controlled, with an original required delivery date of March 23, 2026, and a need ship date of April 27, 2026. The procurement is governed by solicitation SPE8E5-26-T-3722, issued under a DoD acquisition framework, and references applicable technical and quality standards defined in the DLA Master List. The point of contact for inquiries is Alexis Canalichio, and the contract falls under NAICS code 327215 for nonmetallic mineral product manufacturing.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Glass Supply & Material Procurement (Ready-to-Install Panels)The contract entails the supply of pre-cut, labeled, and packaged glass panels designed for immediate installation across a range of vehicles and equipment, ensuring seamless integration during assembly processes. Delivery must adhere to a just-in-time schedule to align with customer production timelines, minimizing inventory burdens and reducing storage requirements. Each panel must be traceable through a robust quality control system that provides full documentation from raw material sourcing through final packaging, enabling accountability and compliance with industry standards. The work is classified under NAICS code 327215, indicating a focus on glass product manufacturing, and is structured as a subcontract governed by the City of Atlanta under the Georgia state procurement system. Bids must be submitted by the deadline of August 11, 2026, with no set-aside provisions specified. Performance is expected to meet stringent quality and delivery benchmarks without specified geographic constraints, though the contracting entity is based in Georgia. All suppliers must demonstrate capacity for consistent, high-volume production with precise labeling and packaging standards tailored to diverse client applications.

City of Atlanta

POSTED

DEADLINE

Emergency & Municipal Vehicle Glass Fabrication and InstallationThe City of Atlanta is seeking a subcontractor to undertake the custom fabrication and installation of safety-rated glass, including bullet-resistant and shatter-resistant glazing, for emergency and municipal vehicles such as police cars, fire trucks, and ambulances. This work requires precise engineering and adherence to high-security standards to ensure the protection of first responders and personnel during operations. The project involves the full lifecycle of glass manufacturing, fitting, and installation, with specifications tailored to the structural and operational demands of emergency response vehicles. The solicitation, categorized under NAICS code 327215 for glass product manufacturing, is open for responses until August 11, 2026, with submissions due by 7:00 PM Eastern Time. The contract is issued as a subcontract, indicating it will be awarded to a vendor who will work under a prime contractor or as part of a broader procurement effort. There is no set-aside designation specified, meaning all eligible businesses may compete. The work will be performed at locations designated by the City of Atlanta within Georgia, and all materials and installations must meet stringent safety and durability benchmarks approved for law enforcement and emergency service applications.

City of Atlanta

POSTED

DEADLINE

Specialty Glazing Materials Supply (Ballistic-Grade Glass)The contract seeks the supply of certified ballistic glass panels compliant with federal standards UL 752 and NIJ 0108.01, requiring custom sizing, integrated framing, and secure delivery to meet operational needs of the U.S. Secret Service under the Department of Homeland Security. All materials must adhere strictly to recognized ballistic resistance specifications and be tailored to specific architectural requirements without deviation from approved testing protocols. The work is to be performed at a location identified by ZIP code 77416, and the scope includes full lifecycle support from fabrication to installation readiness. Subcontractors must respond by the deadline of August 19, 2026, with proposals demonstrating technical capability, compliance history, and logistical capacity to deliver certified products on time. While the solicitation does not specify a set-aside category, participation is restricted to qualified vendors with verifiable experience in manufacturing and supplying ballistic-grade glazing systems to government entities. The NAICS code 327215 indicates focus on glass product manufacturing, and all submissions must align with federal procurement requirements for high-security environments.

U S Secret Service

POSTED

DEADLINE

Gauge Glass Supply for Water SystemsThe contract pertains to the supply of gauge glass components essential for monitoring and maintaining steam and hot water systems within municipal water infrastructure. These components are critical for ensuring accurate level readings and operational safety in high-pressure environments, and the requirement is issued under NAICS code 327215, indicating a focus on glass product manufacturing. The solicitation is structured as a subcontract and is administered by the Mississippi Department of Finance and Administration under the agency name MPTAP, with a response deadline of August 19, 2026, and a posting date of July 23, 2026. No specific location for performance or place of delivery is detailed, and there is no information provided regarding set-aside status or point of contact, leaving potential bidders to reference the official website for full details and submission guidelines.

POSTED

DEADLINE

Glass and Glazing Materials SupplyThe contract requires the supply of U.S.-manufactured glass products, specifically architectural glass and glass beads, for infrastructure applications, with strict adherence to the Buy American and Buy America (BABA) domestic content requirements. All materials must be produced in the United States to meet federal compliance standards for federally funded projects, ensuring that the end products contain a significant portion of domestic components and labor. The scope focuses on delivering high-quality glass materials suitable for use in public infrastructure, emphasizing compliance over cost, and prioritizing proven domestic manufacturers. The solicitation is issued as a subcontract under Philadelphia Gas Works in Pennsylvania, with a response deadline of August 7, 2026, and was posted on July 23, 2026. The North American Industry Classification System code 327215 identifies the relevant category as glass product manufacturing, confirming the nature of the required goods. The place of performance and point of contact details are not specified, but all materials must be delivered to infrastructure sites governed by federal procurement rules. Bidders must demonstrate full compliance with BABA regulations and be prepared to provide documentation verifying the origin and manufacturing processes of all supplied glass products.

Philadelphia Gas Works

POSTED

DEADLINE

Supply of Laminated Reeded Door Glass (26-3/8" x 65-1/2")Twelve units of tempered laminated door glass are being supplied, each measuring 26-3/8 inches wide by 65-1/2 inches high, with a 1/8 inch Box Cross Reeded finish designated as WGG26, laminated to a 5/32 inch clear annealed glass layer using a 0.90 inch clear interlayer, resulting in a total thickness approximately equal to 25/64 inch. The contract is categorized as a subcontract under NAICS code 327215, which pertains to glass product manufacturing, and is issued by the West Virginia agency with performance expected in Charleston. The solicitation was posted on July 22, 2026, and responses are due by August 6, 2026, at 2:30 PM Eastern Time, with no set-aside type specified and no point of contact provided. Access to the full solicitation is available through the provided West Virginia online portal.

POSTED

DEADLINE

Supply of Laminated Reeded Door Glass (24-3/8" x 65-5/2")Seven units of tempered laminated door glass are being supplied with a 1/8 inch Box Cross Reeded finish designated as WGG26, laminated to a 5/32 inch clear annealed glass layer with a 0.90 inch clear interlayer, resulting in a total thickness approximately equal to 25/64 inch. Each glass unit measures 24 and 3/8 inches by 65 and 5/20 inches and is intended for use in door applications requiring both safety and aesthetic detail. The solicitation is issued as a subcontract under NAICS code 327215, which pertains to glass product manufacturing, and is managed by the West Virginia agency with performance expected in Charleston. The opportunity was posted on July 22, 2026, and responses must be submitted by August 6, 2026, at 2:30 PM. The contract does not specify a set aside status or point of contact, and all information is accessible through the provided online portal.

POSTED

DEADLINE

More opportunities from West Virginia

Same awarding agency

As-Built Surveying and MappingThe contract titled As-Built Surveying and Mapping requires the performance of post-remediation surveying to produce accurate as-built plans that document the final conditions of a site following environmental or construction remediation efforts. The work must be conducted using GPS and CAD tools to ensure precise spatial data collection and detailed mapping outputs, ensuring compliance with regulatory and project-specific requirements. The deliverables are intended to reflect the actual, completed state of the site, providing a reliable record for future reference, regulatory submittals, or further development activities. This subcontract is issued by the state of West Virginia under NAICS code 541370, which pertains to surveying and mapping services. The opportunity was posted on July 31, 2026, with a response deadline of August 10, 2026, at 3:30 PM. The place of performance is specifically designated as Charleston, though no further geographic details or contact information are provided. The contract does not specify a set-aside status or organization type, and no point of contact is listed, requiring potential bidders to review the linked portal for additional submission guidelines and requirements.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Hauling and Waste TransportationThe contract titled Hauling and Waste Transportation involves the secure and regulated transport of dredged sediment and debris from a designated site to approved disposal facilities, ensuring full compliance with Department of Transportation standards and all applicable environmental protections. The work is specifically focused on Charleston, West Virginia, and requires adherence to strict logistical and regulatory protocols to prevent contamination and ensure safe handling of hazardous materials. The solicitation is classified as a subcontract under NAICS code 484220, which pertains to specialty trade contractors engaged in waste transportation and disposal services. Bidders must submit their proposals by August 10, 2026, at 3:30 PM Eastern Time, following the posting date of July 31, 2026. Although no set-aside provisions are specified, the opportunity is managed by the West Virginia agency and accessible through the official online portal. Performance is expected to meet all federal and state environmental mandates, including documentation of disposal locations, transportation records, and proof of regulatory compliance throughout the hauling process.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Restoration and LandscapingThe contract pertains to final site restoration efforts requiring grading, seeding, mulching, and replanting to restore disturbed areas to their original condition, ensuring ecological recovery and land stability. The work is part of a broader landscaping and restoration initiative under subcontract, with the North American Industry Classification System code 561730 indicating it falls under waste management and remediation services. Performance of the work is specifically designated for Charleston, West Virginia, though exact address details are not provided. The solicitation was posted on July 31, 2026, with responses due by August 10, 2026, at 3:30 p.m. The agency responsible is West Virginia, operating under its own organizational name without further subdivision specified. There is no set-aside designation or additional demographic or small business preferences indicated. Interested parties must submit proposals through the official online portal linked in the contract data, and no point of contact is listed for direct inquiries, necessitating self-service through the provided URL for submission guidance and requirements.

Landscaping Services

POSTED

DEADLINE

Environmental Compliance and Monitoring ServicesThe contract titled Environmental Compliance and Monitoring Services is a subcontract under NAICS code 541620, issued by the state of West Virginia, with performance centered in Charleston. It requires third-party oversight focused on environmental sampling, compliance reporting, and verification that remediation activities meet established standards throughout the project lifecycle. The solicitation was posted on July 31, 2026, with a response deadline of August 10, 2026, at 3:30 PM, indicating a tight window for qualified entities to submit proposals. The scope demands rigorous monitoring and documentation to ensure adherence to environmental regulations and remediation goals, with all activities tied to the specific location in Charleston. While exact funding mechanisms and reporting formats are not detailed, the emphasis on verification and compliance suggests that deliverables must be precise, auditable, and aligned with state and federal environmental requirements.

Environmental Consulting Services

POSTED

DEADLINE

Drainage System Modification and Standpipe InstallationThe contract pertains to the installation or modification of drainage structures and standpipes designed to regulate water flow both prior to and following remediation activities, with all work guided by drainage maps labeled DR 01. This subcontract falls under NAICS code 237110, which classifies it as water and sewage line and related structures construction, and is tied to remediation efforts in Charleston, West Virginia. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 3:30 PM, indicating a narrow window for potential contractors to submit proposals. While no specific set-aside type or agency organization details are provided, the contract is issued under the authority of West Virginia and requires performance at a specified location within Charleston. All work must align precisely with the technical specifications outlined in the referenced drainage maps to ensure proper water management and compliance with environmental and engineering standards.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

Erosion and Sediment Control InstallationThe contract pertains to the installation of erosion and sediment control measures necessary during and after excavation activities in Charleston, West Virginia. Key components include the deployment of silt fencing, construction of sediment basins, and the stabilization of disturbed land areas to prevent soil displacement and water contamination. The work is classified under NAICS code 238910, indicating it falls within the specialty trade contracting sector, specifically for site preparation and environmental control services. This is a subcontract opportunity with a response deadline of August 10, 2026, at 3:30 PM, and was posted on July 31, 2026. The contracting entity is the West Virginia agency, though no specific office address or point of contact is provided, and the place of performance is limited to Charleston with no further geographic details specified. All work must comply with local environmental regulations to ensure compliance with stormwater and land disturbance standards.

Site Preparation Contractors

POSTED

DEADLINE

Sediment Excavation and DredgingThe contract involves the excavation and removal of contaminated sediment from West Pond to achieve a specified clean-out elevation, requiring comprehensive dewatering processes and off-site disposal in full compliance with applicable environmental regulations. All work must be executed with strict adherence to ecological and safety standards to prevent further contamination and ensure regulatory compliance throughout the operation. The solicitation is classified as a subcontract under NAICS code 238990, with a response deadline of August 10, 2026, and was posted on July 31, 2026. The place of performance is in Charleston, with the contracting agency listed as West Virginia. No set-aside provisions or specific point of contact information are provided, and all bids must be submitted through the official online portal prior to the stated deadline.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Quality Control and Testing (Lump Sum)This contract is a lump sum subcontract for quality control and testing services, focused on oversight and documentation of material testing and inspection coordination to ensure compliance with required standards. The work is tied to a specific project under the West Virginia agency, with performance expected to occur at the location associated with www.wvoasis.gov, although precise city and state details are not provided. The solicitation was posted on July 31, 2026, with a firm response deadline of August 6, 2026, at 2:30 PM, indicating an urgent and time-sensitive procurement process. The NAICS code 541620 identifies the primary business category as engineering services, suggesting the scope involves technical oversight rather than general labor. There is no set-aside designation, meaning all eligible contractors may compete, and no point of contact has been listed, implying responses must be submitted through the designated online portal, https://prd311.wvoasis.gov/PRDVSS1X1ERP/Advantage4.

Environmental Consulting Services

POSTED

DEADLINE

Traffic Control (Lump Sum)The contract is for the implementation of temporary traffic control measures during construction activities under a lump sum payment structure. It is classified as a subcontract with a NAICS code of 238990, indicating it pertains to other specialty trade contractors. The solicitation was posted on July 31, 2026, with responses due by August 6, 2026, at 2:30 PM. The work is to be performed at a location associated with www.wvoasis.gov, under the oversight of the West Virginia agency, though specific city or state details are not provided. The contract does not specify a set-aside type or point of contact, and the place of performance is referenced through a web domain rather than a physical address. Interested parties must submit proposals through the online portal linked in the notice.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Site Preparation (Lump Sum)The contract titled Site Preparation (Lump Sum) is a subcontract for general site preparation work including clearing, grubbing, access development, and layout services, with a NAICS code of 237990 indicating it falls under other heavy and civil engineering construction. The solicitation was posted on July 31, 2026, and responses are due by August 6, 2026, at 2:30 PM. The work is to be performed at a location associated with Www.Wvoasis.Gov, under the oversight of the state of West Virginia, though specific city or address details are not provided. The contract is offered on a lump sum basis, meaning the contractor will receive a fixed payment for completing all scope requirements regardless of actual costs incurred. The opportunity is not subject to any specific set-aside designation, and the point of contact information is not disclosed. Interested parties must access the full solicitation details via the provided online link.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Temporary Rock Check DamsThe contract calls for the installation of eight temporary rock check dams designed to manage runoff and reduce sediment movement within drainage channels. This work falls under the NAICS code 237310, indicating it is related to water and wastewater construction, and is structured as a subcontract with no set-aside provisions. The solicitation was posted on July 31, 2026, with a formal response deadline of August 6, 2026, at 2:30 PM. Performance of the work is expected to occur at a location associated with www.wvoasis.gov, though specific city or state details are not provided. All submissions must be made through the designated online portal at the provided URL, and no point of contact information is listed within the solicitation.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Stabilized Construction Storage AreaThe contract is for the construction of two stabilized areas intended for the storage of equipment and materials during project execution, with the North American Industry Classification System code 238990 indicating it falls under other heavy and civil engineering construction. It is structured as a subcontract and was posted on July 31, 2026, with a response deadline of August 6, 2026, at 2:30 PM. The awarding entity is the state of West Virginia, operating under the agency name West Virginia, with the place of performance listed as www.wvoasis.gov, though specific city and state details are not provided. The solicitation number is absent, and no set-asides or organizational type details are specified. All relevant information and submissions must be accessed through the provided online portal at https://prd311.wvoasis.gov/PRDVSS1X1ERP/Advantage4.

All Other Specialty Trade Contractors

POSTED

DEADLINE