Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Emergency & Municipal Vehicle Glass Fabrication and Installation

Active

State & Local

Response Deadline08/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Atlanta is seeking a subcontractor to undertake the custom fabrication and installation of safety-rated glass, including bullet-resistant and shatter-resistant glazing, for emergency and municipal vehicles such as police cars, fire trucks, and ambulances. This work requires precise engineering and adherence to high-security standards to ensure the protection of first responders and personnel during operations. The project involves the full lifecycle of glass manufacturing, fitting, and installation, with specifications tailored to the structural and operational demands of emergency response vehicles. The solicitation, categorized under NAICS code 327215 for glass product manufacturing, is open for responses until August 11, 2026, with submissions due by 7:00 PM Eastern Time. The contract is issued as a subcontract, indicating it will be awarded to a vendor who will work under a prime contractor or as part of a broader procurement effort. There is no set-aside designation specified, meaning all eligible businesses may compete. The work will be performed at locations designated by the City of Atlanta within Georgia, and all materials and installations must meet stringent safety and durability benchmarks approved for law enforcement and emergency service applications.

General Info

Fabricate and install bullet-resistant glass for emergency vehicles in Atlanta by August 11, 2026.

Agency

Georgia → City of AtlantaView Agency

NAICS

327215 - Glass Product Manufacturing Made of Purchased GlassView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 07:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGeorgia → City of Atlanta

ContactsNo contacts available

OfficeN/A

Organization / Agency

Georgia → City of Atlanta

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Custom fabrication and installation of safety-rated glass such as bullet-resistant or shatter-resistant glazing for police cars, fire trucks, and ambulances.

Similar Contracts

Same NAICS industry code

Glass Supply & Material Procurement (Ready-to-Install Panels)The contract entails the supply of pre-cut, labeled, and packaged glass panels designed for immediate installation across a range of vehicles and equipment, ensuring seamless integration during assembly processes. Delivery must adhere to a just-in-time schedule to align with customer production timelines, minimizing inventory burdens and reducing storage requirements. Each panel must be traceable through a robust quality control system that provides full documentation from raw material sourcing through final packaging, enabling accountability and compliance with industry standards. The work is classified under NAICS code 327215, indicating a focus on glass product manufacturing, and is structured as a subcontract governed by the City of Atlanta under the Georgia state procurement system. Bids must be submitted by the deadline of August 11, 2026, with no set-aside provisions specified. Performance is expected to meet stringent quality and delivery benchmarks without specified geographic constraints, though the contracting entity is based in Georgia. All suppliers must demonstrate capacity for consistent, high-volume production with precise labeling and packaging standards tailored to diverse client applications.

City of Atlanta

POSTED

about 11 hours ago

DEADLINE

Gauge Glass Supply for Water SystemsThe contract pertains to the supply of gauge glass components essential for monitoring and maintaining steam and hot water systems within municipal water infrastructure. These components are critical for ensuring accurate level readings and operational safety in high-pressure environments, and the requirement is issued under NAICS code 327215, indicating a focus on glass product manufacturing. The solicitation is structured as a subcontract and is administered by the Mississippi Department of Finance and Administration under the agency name MPTAP, with a response deadline of August 19, 2026, and a posting date of July 23, 2026. No specific location for performance or place of delivery is detailed, and there is no information provided regarding set-aside status or point of contact, leaving potential bidders to reference the official website for full details and submission guidelines.

POSTED

DEADLINE

Laminated Transparent Armor Glass ManufacturingThe contract seeks the manufacture of laminated transparent vehicular armor glass complete with a perimeter gasket and frame, designed to meet the stringent military specification AMG-347 and require government engineering source approval. This is a subcontract opportunity categorized as a Total Small Business Set-Aside under the SBA program, ensuring exclusivity for small businesses as defined by the Federal Acquisition Regulation. The work involves precision fabrication of high-strength transparent armor capable of withstanding ballistic threats while maintaining optical clarity and structural integrity for military vehicle applications. The North American Industry Classification System code is 327215, indicating the production of glass products for industrial and defense use. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract is issued under the Department of Defense through the Land Supplier Operations Vehicle Support agency. Proposals must be submitted by August 3, 2026, with the solicitation posted on July 23, 2026, and the opportunity is accessible via the DIBBS platform. This contract emphasizes compliance with military standards and requires proven capability in producing certified transparent armor systems.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Glass and Glazing Materials SupplyThe contract requires the supply of U.S.-manufactured glass products, specifically architectural glass and glass beads, for infrastructure applications, with strict adherence to the Buy American and Buy America (BABA) domestic content requirements. All materials must be produced in the United States to meet federal compliance standards for federally funded projects, ensuring that the end products contain a significant portion of domestic components and labor. The scope focuses on delivering high-quality glass materials suitable for use in public infrastructure, emphasizing compliance over cost, and prioritizing proven domestic manufacturers. The solicitation is issued as a subcontract under Philadelphia Gas Works in Pennsylvania, with a response deadline of August 7, 2026, and was posted on July 23, 2026. The North American Industry Classification System code 327215 identifies the relevant category as glass product manufacturing, confirming the nature of the required goods. The place of performance and point of contact details are not specified, but all materials must be delivered to infrastructure sites governed by federal procurement rules. Bidders must demonstrate full compliance with BABA regulations and be prepared to provide documentation verifying the origin and manufacturing processes of all supplied glass products.

Philadelphia Gas Works

POSTED

DEADLINE

Laminated Glass Manufacturing and SupplyThe contract calls for the manufacture and delivery of 352 units of light green laminated glass components, each measuring 0.265 inches thick with a tolerance of ±0.03 inches. These components must fully comply with the technical requirements outlined in military drawings 19207 Rev B or 45152 Rev A, as well as all applicable DLA technical specifications. The work is part of a subcontract solicitation designated as a Total Small Business Set-Aside under the SBA program, ensuring that only small business concerns are eligible to respond. The NAICS code 327215 identifies the industry classification as Flat Glass Manufacturing, aligning with the production of specialized laminated glass products. Performance of the contract is centered in Albany, Georgia, with a ZIP code of 31704-1128 designated as the place of performance. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, providing interested parties approximately twelve days to submit proposals. The contracting entity is the Department of Defense, under the oversight of the Albany Transportation Officer. While no specific point of contact is listed, the official solicitation portal for bids and related documentation is accessible via the DIBBS platform at the provided link.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

Fire-Resistant Glass Component ManufacturingThe contract entails the manufacture of 14 fire-rated glass units designed to meet rigorous military specifications for installation in fire boxes used in defense applications. These units must comply with stringent safety and durability standards to ensure performance under extreme thermal and mechanical conditions, with all components subject to verification against approved defense protocols. The work is a subcontract tied to the Department of Defense through its New Cumberland facility, with performance required at the 17070-5002 zip code location. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, under NAICS code 327215 which pertains to other structural glass and glass product manufacturing. The contract is not set aside for any specific small business category and is intended for qualified subcontractors capable of delivering high-integrity, militarily certified glass components. All units must be fully tested and documented to confirm adherence to required fire-resistance ratings and structural integrity benchmarks under defense-industry conditions.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WINDOW, OBSERVATIONThe contract specifies the procurement of one observation window, identified by NSN 9340-01-295-1753 and part number KS-24645, under solicitation SPE8E5-26-T-3671, issued by the Defense Logistics Agency. Delivery is required within five days of contract award to the destination FOB point, with no tolerance for quantity variance, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The window must be shipped to USS PATRIOT MCM 7 at FPO AP 96675, with transportation logistics governed by DLAD procedural notes C19 and C20, and no special markings are required beyond standard military compliance. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its packaging, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is classified under NAICS code 327215, and all government-specific administrative, shipment, and compliance codes are included for official use, with the required delivery date set for July 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

GLASS, LAMINATEDThe contract specifies the procurement of laminated glass with a thickness of .265 inches, allowing a tolerance of plus or minus .03 inches, and requires the glass to be light green in color. The material must comply with technical and quality requirements referenced by R and I numbers from the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including special marking for fragility and the mandatory label “GLASS DO NOT DROP” as directed by special packaging instruction AK011714428. Palletization must follow DLA packaging requirements, and all shipments require precise labeling and handling to ensure safe transport. Only approved sources—Omni Glass & Paint, Inc., Laminated Glass Corp, and Wheeler Fleet Solutions, Co.—are permitted to supply the part number 123268D, and unapproved vendors must submit source approval documentation to DLA with their offer. The contract includes cybersecurity compliance obligations under CMMC Level 2 and requires strict adherence to procedures for the handling of covered defense information. The total order quantity is 352 units, divided across three CLINs: two units for delivery to Albany, Georgia; sixty units for New Cumberland, Pennsylvania; and 290 units for Tracy, California. All delivery points require FOB origin terms, zero variance in quantity, and inspection and acceptance at destination. Delivery windows range from 160 days after contract award, with need ship dates extending from June 2026 to July 2027, though the original required delivery date remains May 9, 2027. The solicitation is set aside entirely for small businesses under NAICS code 327215, and all offers must reference the correct NSN 9340011714428 and meet technical data package requirements aligned with revision B of drawing 19207 dated June 26, 2023, or revision A of drawing 45152 dated February 1, 1984. The contract is administered by the Department of Defense, with point of contact information and procurement details provided through official DLA channels.

ALBANY TRANSPORTATION OFFICER

POSTED

DEADLINE

56--CCAO Pavilion Insulated Glass The Bureau of Reclamation’s Central California Area Office is soliciting quotes for the fabrication and delivery of eight insulated glass units to be installed in a 24-foot by 50-foot timber pavilion at Folsom Dam, California. This solicitation, numbered 140R2026Q0091, is issued as a combined synopsis and solicitation under FAR Part 12, treating the requirement as a commercial product acquisition. Each glass unit must be constructed with ¼-inch fully tempered Low-E 355 glass over ¼-inch clear glass, resulting in a total thickness of one inch, and must be fabricated to field-verified dimensions with a ½-inch clearance on all sides to accommodate structural movement. Quotes are due by 10:00 a.m. Pacific Time on August 5, 2026, and must be submitted exclusively via email to margaret_jones@ios.doi.gov in accordance with the 52.212-1 Addendum instructions. Delivery is required FOB destination to 7794 Folsom Dam Road, Folsom, CA 95630, within 30 days after receipt of order, and the contract will be awarded on a firm-fixed-price basis. The evaluation will be based on a trade-off approach, weighing technical capability, past performance, and price without predefined numerical weights. Technical evaluation will focus on the vendor’s ability to meet dimensional and material specifications, adhere to the delivery schedule, and present a feasible approach. Past performance will be assessed using multiple sources, including CPARS, FPDS-NG, and vendor-provided examples. Price reasonableness will be analyzed under FAR Part 12 techniques, with scrutiny for unbalanced pricing. Contractual clauses include deviations from standard FAR provisions concerning whistleblower rights, confidentiality agreements, system for award management maintenance, procurement integrity, and prohibitions related to inverted corporations, child labor, equal opportunity for workers with disabilities, and trafficking in persons, all marked as RFO deviations. Invoicing must be done electronically through the Invoice Processing Platform (IPP), and vendors must provide their SAM UEI and CAGE codes. Although no specific packaging, marking, or labeling requirements are stated, the contract mandates compliance with all specifications and acceptance at the delivery location by an authorized government representative. No options, clauses for extensions, or security clearance requirements are included.

Mp-Regional Office

POSTED

DEADLINE

93--GLASS,LAMINATEDThe contract solicitation seeks laminated glass under NSN 9340011714428 with a total quantity of 352 units to be delivered to DLA Distribution Albany within 160 days of award. The requirement is divided into three line items for quantities of two, sixty, and two hundred ninety units respectively, all with the same delivery specification. Only approved sources identified by the vendor codes 0L647 123268D, 3L199 123268D, and 55683 93-123268D are eligible to respond. This is a total small business set-aside under FAR 19.5, and all responsible small business concerns may submit quotes provided they are submitted electronically through the solicitation portal no later than August 3, 2026. The solicitation is issued under NAICS code 327215 by the Department of Defense through DLA Troop Support, with the office located in Philadelphia, Pennsylvania. No hard copies of the solicitation document or supporting specifications are available; all information must be retrieved via the provided online link. Questions must be directed via email to the designated buyer contact, and responses must be submitted electronically through the SAM.gov platform prior to the deadline.

DLA Troop Support

POSTED

DEADLINE

Supply of Bullet-Resistant Glazing MaterialsThe contract mandates the supply of certified 3/4 inch Poly-L1 bullet-resistant polycarbonate panels that conform to UL 752 Level 1 ballistic performance standards, intended for use in upgrading security at transit facilities. These panels are specifically engineered to provide verified resistance against handgun fire and must meet rigorous industry-certified testing protocols to ensure reliability under threat scenarios. The materials are to be furnished as part of a subcontract under the Procurement agency’s Washington office, with no set-aside classification specified, indicating open competition among eligible vendors. The solicitation was posted on July 21, 2026, and responses are due by August 12, 2026, with performance expected to occur at unspecified transit facility locations under the agency’s jurisdiction. The North American Industry Classification System code 327215 identifies the work as related to glass and glass product manufacturing, aligning with the specialized nature of the ballistic glazing. All materials must be certified and traceable to ensure compliance, with delivery timelines and quality assurance protocols implied as critical to meeting the security upgrade objectives. The project does not include details on installation or maintenance, focusing solely on the procurement of certified polycarbonate panels.

POSTED

DEADLINE

Supply of Vehicular Windows (NSN 2510013167421)The contract calls for the manufacture or supply of military-specification vehicular windows designated by NSN 2510013167421, to be delivered in ready-for-issue condition with full compliance to all Department of Defense standards. The windows must meet stringent military performance and durability requirements, ensuring suitability for use in defense vehicles under operational conditions. The work is classified as a subcontract under NAICS code 327215, indicating the involvement of glass and glass product manufacturing, and is procured through the Land Supply Chain division of the Department of Defense. The solicitation was posted on July 21, 2026, with responses due by August 5, 2026, providing interested parties a limited window to submit proposals. The place of performance and point of contact details are not specified, but contractual obligations require adherence to DoD logistics and delivery protocols. The contract is available for review via the DIBBS platform, and all suppliers must be prepared to demonstrate full compliance with military specifications, quality control, and delivery timelines to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Georgia → City of Atlanta

Same awarding agency

Automotive Window Tinting ServicesThe City of Atlanta is soliciting bids for automotive window tinting services to apply solar control, privacy, or safety film to its vehicle fleet, ensuring full compliance with Georgia’s legal standards for visibility and reflectivity. The work must meet all state regulatory requirements to maintain driver safety and legal adherence while enhancing vehicle functionality through reduced heat gain, glare reduction, and occupant protection. The contract is classified as a subcontract under NAICS code 811198, and responses are due by August 11, 2026, with the solicitation posted on July 27, 2026. All performance must occur across the City’s fleet within Georgia, and vendors are expected to demonstrate experience in automotive film applications that align with local statutes. The opportunity is open to qualified contractors without specific set-aside restrictions, and details can be accessed via the official state procurement portal.

All Other Automotive Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Heavy Equipment & Off-Road Vehicle Glass ReplacementThe contract encompasses the full replacement of windshields, side windows, and operator cab glass for heavy machinery and off-road municipal vehicles including excavators, dump trucks, and snow plows. All work must be performed to ensure safety, durability, and compliance with industry standards for equipment used in municipal operations. The solicitation is designated as a subcontract and is issued by the City of Atlanta under the NAICS code 811198, which covers other personal and household goods repair and maintenance. The opportunity was posted on July 27, 2026, with a response deadline of August 11, 2026, at 7:00 PM ET, requiring interested parties to submit proposals within this timeframe. Performance of the work is expected to occur in Georgia, though specific locations are not detailed in the provided information. The contract does not include a set-aside designation, and no point of contact details are provided, with all submissions to be made through the official online portal linked in the posting.

All Other Automotive Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Automotive Glass Repair (Windshield & Window Crack Repair)The City of Atlanta is soliciting subcontractors to perform repairs on cracked or chipped windshields and side windows across its fleet of vehicles using resin injection and curing techniques. The work requires precise application of industry-standard methods to restore structural integrity and optical clarity, followed by thorough inspection and post-repair validation to ensure compliance with safety and performance standards. All repairs must be conducted in accordance with best practices to prevent further damage and maintain the safety of vehicle occupants. The contract opportunity, posted on July 27, 2026, has a response deadline of August 11, 2026, and falls under NAICS code 811121 for automotive glass repair services. It is classified as a subcontract and does not specify a set-aside status. Performance is expected to occur within the jurisdiction of the City of Atlanta, Georgia, though the exact location details are not provided. Interested parties must submit proposals through the official procurement portal prior to the deadline, with no point of contact information listed for direct inquiries.

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

IFB/GS/DPW/2607-1270011/Glass Repair Products & ServiceThe City of Atlanta is soliciting bids for glass repair, replacement, installation, fabrication, and tinting services for its fleet of vehicles, machinery, heavy equipment, off-road equipment, and specialized municipal and emergency response assets. All services must meet or exceed minimum requirements and adhere to current manufacturer specifications, industry standards, environmental regulations, and safety protocols at the time of service delivery. The contract covers comprehensive glass-related work across a wide range of municipal equipment and is intended to ensure consistent quality, safety, and compliance throughout the city’s operations. This solicitation, identified as PE-66062-NONST-2027-000000458, was posted on July 27, 2026, with responses due by August 11, 2026, at 7:00 PM. The procurement is classified under a state and local government (SLED) agency and is managed by the City of Atlanta’s Department of Public Works. The point of contact for inquiries is Cameron Weaks, reachable via phone at 470-442-6530 or email at cweaks@atlantaga.gov. All work must be performed within the State of Georgia, and bidders are expected to comply with all applicable regulations without reference to specific documents, ensuring timely, safe, and standardized service delivery across the city’s operational assets.

Glass and Glazing Contractors

POSTED

about 11 hours ago

DEADLINE

Design and Layout for Public Communication MaterialsThe City of Atlanta is seeking a subcontractor to provide professional graphic design and layout services for public-facing communication materials such as reports, brochures, and inserts, with a focus on maintaining brand consistency and ensuring full compliance with ADA accessibility standards. The work requires attention to detail in visual design, typography, color usage, and structured layout to produce materials that are both aesthetically cohesive and accessible to individuals with disabilities. The contract falls under NAICS code 541430 for graphic design services and is posted as a subcontract opportunity with a response deadline of August 5, 2026. The solicitation is administered through the Georgia Department of Administrative Services and is available for review via the provided online link, though no specific point of contact or place of performance details are listed.

Graphic Design Services

POSTED

DEADLINE

Print Logistics and Delivery CoordinationThe City of Atlanta is seeking a subcontractor to handle the local and regional delivery of printed materials, requiring secure packaging, precise labeling, real-time GPS tracking, and confirmed delivery to city facilities or designated end recipients. The service must ensure the safe and timely transportation of sensitive printed content with full accountability throughout the supply chain, from pickup to final handoff. All deliveries will be tracked and verified to meet the city’s operational and security standards. This subcontract opportunity, classified under NAICS code 484220, is posted with a response deadline of August 5, 2026, and is part of the Georgia state procurement system. While specific details on set-aside status and point of contact are not provided, bidders must be prepared to comply with all delivery protocols and documentation requirements outlined in the solicitation. The contract emphasizes reliability, security, and traceability, with performance expected across the City of Atlanta and surrounding regional areas, though exact geographic boundaries are not specified in the posted data.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Rush and On-Demand Printing ServicesThe City of Atlanta is seeking qualified vendors to provide rush and on-demand printing services for time-sensitive materials such as emergency notices, urgent correspondence, and last-minute invitations that require production within a 24- to 72-hour window and coordinated delivery. This subcontract opportunity, categorized under NAICS code 323110 for printing and related support activities, is open for responses until August 5, 2026, with proposals due by 7:00 PM local time. The work must be performed in Georgia and is intended to support critical communications needs across city operations. Vendors must demonstrate the ability to reliably deliver high-quality printed materials on tight deadlines, ensuring timely and accurate fulfillment of urgent requests without delay.

Commercial Lithographic Printing

POSTED

DEADLINE

Direct Mail Fulfillment and Mailing List ManagementThe contract titled Direct Mail Fulfillment and Mailing List Management encompasses a full suite of end-to-end mailing services designed to support both scheduled and urgent campaign needs. It includes comprehensive list cleanup and address validation to ensure accuracy and compliance, followed by USPS-certified bulk mailing operations with proper sorting to qualify for postage discounts and optimize delivery timelines. The provider is expected to deliver end-to-end tracking capabilities to monitor campaign progress and provide transparency throughout the mailing lifecycle, ensuring accountability and measurable outcomes for each distribution. This is a subcontract under NAICS code 561410, issued by the City of Atlanta through the Georgia state procurement system, with a response deadline of August 5, 2026. The solicitation is open to qualified vendors capable of handling high-volume mailings with strict adherence to USPS standards and timely fulfillment for time-sensitive campaigns. Performance is expected to meet or exceed postal regulations, with emphasis on efficiency, data integrity, and reliable delivery confirmation. All work must be completed in accordance with the contracted scope, though specific performance locations and point of contact details are not provided in the posted data.

Document Preparation Services

POSTED

DEADLINE

High-Volume Commercial Printing ServicesThe City of Atlanta is seeking qualified vendors to provide high-volume commercial printing services for public communication materials including water quality reports, utility bill inserts, brochures, and official letters. The work requires offset or digital printing with strict adherence to color accuracy and consistent batch-to-batch quality to ensure professional, reliable outputs across thousands of units. This subcontract opportunity is open for bids with a response deadline of August 5, 2026, and is classified under NAICS code 323110 for commercial printing. All materials must be produced to meet the agency’s standards for clarity, durability, and visual consistency, with an emphasis on large-scale production capabilities. Bidders should demonstrate experience handling similar public sector printing projects requiring precision and timeliness. The place of performance and specific delivery requirements are not detailed, but successful contractors will be expected to manage logistics, quality control, and scheduling to support the agency’s ongoing public outreach efforts.

Commercial Lithographic Printing

POSTED

DEADLINE

IFB/GS/DWM/ATLDOT/2607-1270006/Specialized Printing ServicesThe City of Atlanta’s Department of Watershed Management and Department of Transportation are seeking specialized printing, mailing, and fulfillment services to support high-volume public communication efforts, including annual water quality reports, monthly bill inserts, brochures, postcards, letters, invitations, and time-sensitive rush requests requiring precise turnaround and coordinated delivery. Vendors must demonstrate proven capacity for large-scale production, efficient mailing operations, and list maintenance to reliably meet recurring and urgent deadlines throughout the fiscal year, ensuring timely and accurate dissemination of critical public information. All interested suppliers are required to register as a vendor on the official supplier portal at https://www.atlsuppliers.com/ to access the full solicitation and submit proposals. The solicitation, identified as PE-66062-NONST-2027-000000457, was posted on July 23, 2026, with responses due by August 5, 2026, and all work performance is expected to occur within the state of Georgia. Primary contact for inquiries is Lyndon McCluskey at lmccluskey@atlantaga.gov or 470-442-2857.

Commercial Lithographic Printing

POSTED

DEADLINE

Paint and Coating SupplyThe City of Atlanta is seeking a subcontractor to supply architectural paints, primers, and protective coatings for mandated painting projects across city-owned facilities. The scope includes precise color-matching to existing finishes, timely delivery to job sites, and ongoing inventory support to ensure continuous project progress without delays. All materials must meet specified performance and durability standards suitable for public infrastructure and high-traffic environments. The opportunity is open for bidding with a response deadline of August 11, 2026, and is classified under NAICS code 424440 for paint and coating wholesale distribution. Bidders must be prepared to align with the city’s requirements for quality control, logistics, and on-site coordination throughout the duration of the contract.

Poultry and Poultry Product Merchant Wholesalers

POSTED

DEADLINE