Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of Leslie Controls Proprietary Bolts (NSN 5306-01-158-6687)

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the ASC Commodities Division of the Department of Defense involves the procurement or manufacture of four specialized Leslie Controls proprietary bolts, identified by NSN 5306-01-158-6687 and part number 48748. These components are intended for prime contractors fulfilling DLA supply contracts and must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contractor must ensure strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Additionally, the agreement requires full compliance with the Buy American Act and the Berry Amendment, while quality assurance must follow zero-based sampling plans as outlined in MIL-STD-1916 or ASQ H1331.

General Info

DoD subcontract for four Leslie Controls proprietary bolts delivered to DLA San Joaquin.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-19JC.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specialized bolts for prime contractors delivering DLA supply contracts. Procures or manufactures bolts identified as NSN 5306-01-158-6687 / Leslie Controls, Inc. P/N 48748. Adheres to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Complies with Buy American Act, Berry Amendment, and zero-based sampling plans (MIL-STD-1916 or ASQ H1331). Delivers four bolts FOB Origin to DLA Distribution San Joaquin.

Similar Contracts

Same NAICS industry code

Supply of NAS1398 Blind Rivets (NSN 5320015038130)

ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Supply of Hexagon Head Cap Screws (NSN 5305014390099)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

NUT, SELF-LOCKING, HEXAG

Solicitation # SPE4A6-27-T-3703

Solicitation SPE4A6-27-T-3703, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of 2,392 self-locking hexagon nuts (NSN 5310000203260). The items must be delivered FOB Origin to DLA Distribution Warner Robins, with a need ship date of June 25, 2026, and an original required delivery date of November 15, 2027. The procurement is a candidate for automated award, and offers utilizing additive manufacturing are ineligible. Certified HUBZone small businesses are eligible for a price evaluation preference. The contractor must adhere to strict quality and technical standards, including SAE AS9003 or ISO 9001 compliance. Inspection and acceptance occur at the origin, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization must follow DLA requirement RP001. Additionally, the contract prohibits the intentional addition of mercury and requires compliance with the Buy American Act and Berry Amendment. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-1130

Solicitation SPE4A7-27-T-1130 is a request for quotes from the Defense Logistics Agency for the procurement of 37 machine bolts, identified by NSN 5306-01-046-3236. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of June 4, 2027, and an original required delivery date of October 31, 2027. A critical restriction for this award is the absolute prohibition of additive manufacturing; any offers including parts produced via additive manufacturing will be deemed ineligible and will not be evaluated. The contract mandates strict adherence to quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin per FAR 52.246-2. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, respectively. Additionally, the procurement is subject to stringent export controls under ITAR and EAR, requiring approved US/Canada Joint Certification Program certification for access to technical data. Offerors must also comply with the Buy American Act and the Berry Amendment, with specific disclosure requirements for non-domestic materials. Payment and invoicing shall be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5752

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-3787

Solicitation SPE4A6-27-T-3787 is a fixed-price request for the procurement of 67 set screws (NSN 5305-01-705-6422) for the DLA Weapons Support ASC Commodities Division. The delivery is required within 103 days after order, with a need ship date of February 2, 2027, and a final required delivery date of October 31, 2027. Delivery is FOB Origin to DLA Distribution San Joaquin in Tracy, California. Quotations are due by October 21, 2026. This acquisition may be subject to automated award, and a price evaluation preference is available for certified HUBZone Small Business Concerns. Notably, any offers featuring items produced via additive manufacturing are ineligible for award. The contract mandates strict adherence to quality and technical standards, requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with specific AQLs assigned for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Due to the nature of the technical data, the contract is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract incorporates various FAR and DFARS clauses regarding cybersecurity, including NIST SP 800-171 and CMMC Level 2 requirements, as well as domestic sourcing restrictions under the Buy American Act and Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

SCREW, CAP, HEXAGON HEAD

Solicitation # SPE4A5-26-T-369D

Solicitation SPE4A5-26-T-369D is issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of 17 units of hexagon head cap screws, identified by NSN 5305014390099. The requirement is managed under the First Destination Transportation program with delivery terms set as FOB Origin. Key dates include a need ship date of February 12, 2027, and an original required delivery date of April 23, 2027. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, where both inspection and acceptance will take place. The contract mandates strict adherence to quality and technical standards, requiring manufacturer inspection systems to comply with ISO 9001:2015 or an equivalent. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-3697

Solicitation SPE4A6-27-T-3697 is a fixed-price federal procurement issued by the DLA Weapons Support ASC Commodities Division for 91 units of close tolerance screws, identified by NSN 5305-01-514-8806. The contract requires delivery within 166 days, with shipping, inspection, and acceptance all designated as FOB Origin. Delivery is to be made to the DLA Distribution Depot at Tinker AFB, Oklahoma. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to strict technical and quality standards, including SAE AS9003 or ISO 9001 certification for the manufacturer's inspection system and zero non-conformances in sample lots per MIL-STD-105/ASQ Z1.4. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129 and Hazard Communication Standards for any hazardous materials. This procurement is subject to significant regulatory controls, including ITAR and EAR export restrictions, the Buy American Act, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the use of additive manufacturing is prohibited unless specifically authorized.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-5683

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-3741

Solicitation SPE4A6-27-T-3741 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 482 close tolerance screws, identified by NSN 5305010635060 and part number NAS1578A3R12. The contract specifies delivery terms as FOB Origin with a required delivery timeline of 15 days after award, targeting a need ship date of November 6, 2026, and an original required delivery date of April 6, 2027. Delivery and inspection points are both set to destination at the DLA Distribution Depot Hill in Hill AFB, Utah. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance under certain plans. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the solicitation notes a price evaluation preference for certified HUBZone Small Business Concerns and prohibits the use of additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A5-27-T-1575

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-27-T-1134

Solicitation SPE4A7-27-T-1134 is a Request for Quotations issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the procurement of 331 resilient weapon system mounts (NSN 5342015657965). The requirement is split into two line items: CLIN 0001 for 106 units and CLIN 0002 for 225 units. Delivery is required within 137 days after order, with need ship dates in August and September 2026 and a final required delivery date of May 6, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at destination locations in Hill AFB, Utah, and Albany, Georgia. The contract mandates strict quality and shelf-life standards, requiring items to be Type I (Code S) with at least 85 percent of their 60-month shelf life remaining upon receipt. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing Special Marking Code 32. Quality assurance follows MIL-STD-1916 or ASQ H1331, with acceptance based on zero non-conformances in the sample lot. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for electronic invoicing and compliance with various DFARS and FAR clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity assessment requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supply of Plain Hexagon NutsThis subcontract involves the supply of six Plain Hexagon Nuts for the Department of Defense ASC Commodities Division, specifically intended for prime contractors. The fasteners must strictly adhere to Leslie Controls Inc. specifications and be delivered to a government destination in New Cumberland. The contractor is responsible for providing a comprehensive data package containing all necessary technical documentation. Additionally, the supplier must ensure full compliance with all federal and military standards regarding labeling and shipment.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

Branched Wiring Harness Assembly SupplyThis subcontract, issued by the Department of Defense ASC Commodities Division, requires the manufacture or sourcing of 162 branched wiring harness assemblies identified as NSN 5995-01-214-5783. All deliverables must strictly adhere to RA001 technical requirements and RP001 packaging and palletization standards. The project is designated as a Total Small Business Set-Aside under NAICS code 334418, with performance taking place in New Cumberland. To be eligible, contractors must possess the capability to handle Covered Defense Information as outlined in RD002 and provide a CMMC Level 2 self-assessment. The solicitation was posted on October 21, 2026, with a response deadline of October 26, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325015303580)This subcontract involves the supply of six specialized retaining rings under NSN 5325015303580 for prime contractors working on Department of Defense projects within the DLA ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing these components in strict accordance with established technical specifications, DLA quality standards, and material requirements. The agreement is governed by the DLA Master Solicitation for Automated Simplified Acquisitions and falls under NAICS code 332510. Performance for this contract is designated to take place in New Cumberland, Pennsylvania. The solicitation was posted on October 21, 2026, with a response deadline set for October 26, 2026.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

WIRING HARNESS, BRAN

Solicitation # SPE4A6-26-T-66M8

Solicitation SPE4A6-26-T-66M8 is a total small business set-aside fixed-price contract issued by the DLA Aviation ASC Commodities Division for the procurement of 162 branched wiring harness assemblies under NSN 5995-01-214-5783. The delivery is required within 164 days after receipt of the order, with shipping terms set as FOB Origin and the destination point located in New Cumberland, Pennsylvania. The procurement falls under NAICS code 334419 and requires the contractor to provide a complete data package for approved and alternate parts. The contract mandates strict adherence to quality and security standards, including CMMC Level 2 self-assessment and the safeguarding of covered defense information. Inspection and acceptance will occur at the destination, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-129 and DLA requirement RP001, while bare item marking is governed by RQ017. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Additionally, the offeror must comply with the Buy American Act and Berry Amendment restrictions regarding domestic sourcing.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

FIXTURE, LIGHTING

Solicitation # SPE4A6-26-R-X796

POSTED

about 18 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-779F

This solicitation, number SPE4A6-26-T-779F, is issued by the DLA Aviation ASC Commodities Division for the procurement of 2,061 blind rivets, specifically part number NAS1398D5AB2 (NSN 5320015038130). The items must comply with technical standards NAS1398 Revision 11 and NAS1400 Revision 07. Delivery is required within 168 days, with the destination set as DLA Distribution San Diego. Inspection and acceptance will occur at the origin, and the manufacturer's inspection system must meet SAE AS9003 or ISO 9001 standards. Sampling shall follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must adhere to ASTM D3951 and RP001 DLA requirements, with marking and labeling following MIL-STD-129. Item Unique Identification is not required. The award process may be automated, and a price evaluation preference is available for certified HUBZone small businesses. Offerors must comply with the Buy American Act and the Berry Amendment, and those requiring NIST SP 800-171 implementation must provide a current assessment not exceeding three years old. Items produced via additive manufacturing are ineligible for award. Payment and invoicing must be processed through the Wide Area Workflow system.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE4A6-26-T-10WR

Solicitation SPE4A6-26-T-10WR is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of six retaining rings, identified by NSN 5325-01-530-3580 and part number N80613. The requirement is for a critical application item with a delivery schedule of 200 days after order, with a required delivery date of February 24, 2027. Shipping is designated as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and technical standards, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements. A significant restriction is placed on the use of mercury or mercury-containing compounds in the hardware and packaging. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

CASE, ELECTRONIC COMMUN

Solicitation # SPE4A6-26-T-27ZL

Solicitation SPE4A6-26-T-27ZL is a federal procurement issued by the Defense Logistics Agency for the supply of 289 electronic communications equipment cases. The required items are specifically identified as L3HARRIS GLOBAL COMMUNICATIONS, INC. part number 12193-1590-02 and NSN 5895-01-715-0336. Delivery is required within 171 days, with a need ship date of March 8, 2027, and an original required delivery date of March 23, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with FAR 52.246-2 for inspection and FAR 52.222-50 regarding combating trafficking in persons. Additionally, the contractor must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information.

Other Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A6-26-T-35JT

Solicitation SPE4A6-26-T-35JT is a federal procurement issued by the Defense Logistics Agency ASC Commodities Division for the supply of two electrical leads, identified by NSN 6150-01-502-6779. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of March 21, 2027, and an original required delivery date of January 26, 2028. Terms are established as FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the origin, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. This procurement carries stringent security and compliance mandates, including CMMC Level 2 certification and adherence to ITAR and EAR export controls, which requires offerors to hold an approved US/Canada Joint Certification Program certification. Packaging must follow ASTM D3951 and MIL-STD-129, while bare item marking must comply with RQ017. Additionally, the use of additive manufacturing for these parts is prohibited without specific authorization. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Price evaluation preferences are available for SBA-certified HUBZone small businesses.

Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

NUT, PLAIN, HEXAGON

Solicitation # SPE4A6-26-T-11GV

Solicitation SPE4A6-26-T-11GV is issued by the DLA Aviation ASC Commodities Division for the procurement of six plain hexagon nuts, identified as NSN 5310-01-396-9682 and part number N-522 PC 13. This item is designated as a critical application item. The required delivery date is May 12, 2027, with a delivery timeline of 274 days after order. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This is not a small business set-aside, and the acquisition falls under NAICS code 332722. The contract requires strict adherence to quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Additionally, the provider must comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Offerors are prohibited from using additive manufacturing processes unless specifically authorized.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

LIGHT, INDICATOR

Solicitation # SPE4A6-27-T-0007

Solicitation SPE4A6-27-T-0007 is a fixed-price request for quotation issued by the DLA Aviation ASC Commodities Division for the procurement of one indicator light, NSN 6210011188422. The requirement specifies a delivery timeframe of 20 days after order, with an original required delivery date of August 4, 2026. Shipping is established as FOB Origin under the First Destination Transportation program, with both inspection and acceptance occurring at the destination in Silverdale, Washington. The contractor must adhere to strict quality and technical standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific DLA packaging requirements under RP001. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement if MIL-STD-105/ASQ Z1.4 is utilized. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional applications. Administrative compliance requires the use of the Wide Area WorkFlow system for electronic invoicing and payment requests.

Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS