Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Military-Grade Sealing Compound (NSN 8030013636506)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement and delivery of two cartridges of NSN 8030013636506, a military-grade sealing compound designated as P/S 872B-1/2, fully compliant with applicable military specifications and DPAS-rated priority processing requirements. The product must be packaged, labeled, and shipped in strict adherence to hazardous materials regulations to ensure safe transport and regulatory compliance. Delivery is specified under FOB destination terms, meaning the supplier is responsible for all costs and risks until the shipment arrives at its final destination in San Diego, California. The entire shipment must be fully traceable from origin to delivery with documentation supporting chain-of-custody and hazmat handling protocols. The contract falls under NAICS code 325520 for other paint and coating manufacturing and is issued by the Defense Logistics Agency under the Department of Defense as a subcontract, with the solicitation posted on July 16, 2026.

General Info

Procure two hazmat-certified sealing cartridges, FOB San Diego, DPAS priority, full traceability required.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

325520 - Adhesive ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES26F62VW.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEALING COMPOUND

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure and deliver 2 cartridges of NSN-specified sealing compound P/S 872B-1/2, compliant with military specifications and DPAS-rated order requirements. Shipment must be traceable and hazmat-compliant to San Diego, CA, under FOB destination terms.

Similar Contracts

Same NAICS industry code

Solicitation # SPE8ES-26-T-2578

This contract is a solicitation from the Defense Logistics Agency for the procurement of 12 units of red adhesive, specifically identified as Loctite 263 in 250 mL containers. The order is designated under NSN 8040-01-621-9702 and requires delivery to Fort Eustis, Virginia, within 20 days. The product is subject to a non-extendable 12-month shelf life and must be stored between 46 and 70 degrees Fahrenheit. The supplier must adhere to strict hazardous materials guidelines, including the submission of Safety Data Sheets and compliant labeling per OSHA and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements. Additionally, the contract notes that covered defense information potentially applies and requires the removal of government identification from any non-accepted supplies.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Adhesive Supply (NSN 8040011230082)

POSTED

DEADLINE

Epoxy Coating Formulation and ManufacturingThis subcontract with the Defense Logistics Agency under the Department of Defense involves the formulation and manufacture of a two-part clear epoxy coating, identified as part number GC-100 and NSN 8030013748035. The product is specifically designed for sealing terrazzo-type flooring and must adhere to strict quality control measures, hazardous materials standards, and a minimum shelf-life of 24 months. The project falls under NAICS code 325520 and is scheduled for performance at FPO 96349-1100. Interested parties must respond by August 18, 2026, following the posting date of August 12, 2026.

Defense Logistics Agency

POSTED

DEADLINE

ADHESIVE, DRY MOUNTI

Solicitation # SPE8ES-26-T-2572

This contract is for the procurement of pressure sensitive dry mounting adhesive, identified by NSN 8040007542761. The product must be supplied as either 9x12 inch or 17x22 inch sheets with non-stick release sheeting, packaged in boxes of at least 100 sheets. Each box must be lined with a plastic film at least 3 mils thick to prevent chemical or physical interaction with the contents. The item is classified as a Type I product with a non-extendable shelf life of 24 months. The supplier is required to comply with several technical and quality standards, including DLA packaging requirements and MIL-STD-129 for marking. Because the material is subject to hazardous communication standards, the supplier must submit Safety Data Sheets and compliant labels for review and approval prior to the award. Delivery is set for FOB Destination to Camp Humphreys in Pyeongtaek, South Korea, with a required delivery date of August 14, 2026, and a delivery window of 10 days.

Defense Logistics Agency

POSTED

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2576

This contract is for the procurement of two kits of brown, temperature-resistant sealing compound used for integral fuel tanks and fuel cell cavities. The material must adhere to SAE specification AMS-S-8802C, specifically Type I dichromate cured sealant, Class B-1/2. A critical requirement is that the manufacturer must be approved by the Performance Review Institute's Qualified Products List at the time of award. The product has a nine-month extendable shelf life and must be stored between 60 and 80 degrees Fahrenheit. The supplier is required to provide Safety Data Sheets and Hazardous Communication Standard labels in compliance with OSHA and Federal Standard 313-E prior to the award. Delivery is set for 20 days after the order, with shipping and marking following MIL-STD-129 and DLA packaging requirements. The items are to be delivered FOB destination to Westover ARB in Chicopee, Massachusetts, via traceable means.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2522

This contract is for the procurement of adhesive, specifically part number N10774 from Zodiac of North America, Inc., under solicitation SPE8ES-26-T-2522. The order consists of 27 packages of 5-ounce tubes, with a required delivery date of October 15, 2026, and a delivery window of 111 days. The items are subject to a non-extendable 36-month shelf life and must comply with strict marking and packaging standards, including MIL-STD-129 and DLA packaging requirements. The contract includes significant safety and environmental mandates. Suppliers must adhere to the Hazard Communication Standard by providing Safety Data Sheets and compliant labels for hazardous materials. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2567

This contract is for the procurement of a gray solid paste adhesive, specifically identified as NSN 8040-01-685-5306, with a quantity of two tubes. The item is associated with Momentive Performance Materials Inc and RS Hughes Co Inc. It has a non-extendable shelf life of 12 months and must be stored between 60 and 80 degrees Fahrenheit. Delivery is required within five days to the USS Patrick Gallagher at Bath Iron Works in West Bath, Maine, via the fastest traceable means. The agreement mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Because the material is hazardous, the supplier must provide Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E prior to the award. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2525

This solicitation by the Defense Logistics Agency is for the procurement of one pint of adhesive, identified by National Stock Number 8040-00-597-9723. The contract requires delivery within five days after the order is placed and is subject to specific technical and quality requirements maintained in the DLA Master List. Compliance with CMMC Level 2 certification for third-party assessment organizations is required, and the contractor must adhere to DLA packaging standards and the removal of government identification from non-accepted supplies. The agreement mandates strict adherence to the Hazard Communication Standard, requiring the submission of Safety Data Sheets and compliant labeling in accordance with OSHA regulations prior to the award. Additionally, the contract involves the handling of covered defense information and technical data subject to ITAR or EAR export controls. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2569

This solicitation from the Department of Defense, managed by the Defense Logistics Agency, is for the procurement of adhesive under NSN 8040-01-123-0082. The requirement is for a quantity of four gallons with a delivery timeline of five days after receipt of order. Performance will take place at Tinker AFB. The contract imposes strict security and compliance mandates, including CMMC Level 2 certification for third-party assessment and adherence to covered defense information protocols. Additionally, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DOD export-controlled technical data training. All supplies must comply with DLA packaging requirements and the removal of government identification from non-accepted items.

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2563

This contract is for the procurement of two kits of a two-part, thermally conductive epoxy encapsulant used for electronic components, specifically National Starch and Chemical Co part number STYCAST 2850FT BLK/CTLYST 11-2LB. The item is subject to a non-extendable shelf life of 12 months and must be stored at temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within five days, with FOB and inspection points set at the destination. Suppliers must adhere to strict packaging and marking standards, including MIL-STD-129 and RP001, ensuring that each kit contains a list of contents and is properly cushioned to prevent damage. Because the material is hazardous, the supplier is required to submit Safety Data Sheets and Hazardous Communication Standard labels for approval prior to the award, in compliance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Each item must be clearly marked with the lot or batch number and shelf life monitoring data.

Defense Logistics Agency

POSTED

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-26-T-2568

Solicitation SPE8ES-26-T-2568, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of one box of off-white sealing compound (NSN 8030-01-450-1952). The required product consists of twenty-eight rolls, each measuring 1/8 inch thick by 3/4 inch wide and 25 feet long, featuring full-length release paper on a rigid core. This item is classified as a Type I (Code H) product with a non-extendable shelf life of 12 months. The requirement is part of a Foreign Military Sales program for South Korea, with delivery required within 20 days after receipt of order. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and Hazard Communication Standard labels in accordance with 29 CFR 1910.1200. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with specific instructions to ship and store the material flat at 72 degrees Fahrenheit. Inspection and acceptance are conducted at the point of origin. The procurement is subject to various federal and defense regulations, including the Buy American Act, Berry Amendment, and specific cybersecurity requirements under DFARS 252.204-7012 and NIST SP 800-171. Quotations were due by August 18, 2026, with electronic invoicing to be processed through the Wide Area Workflow system.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2574

Solicitation SPE8ES-26-T-2574, issued by the Defense Logistics Agency, is a request for quotations for the procurement of off-white adhesive, specifically Loctite Corp part number 261797. The requirement is for six 50-milliliter dual cartridges under NSN 8040015110064. The product is classified as a Type I item with a non-extendable shelf life of 18 months. Delivery is required within 20 days after the order, with the place of performance located in Newport, MA. The contract mandates strict adherence to hazardous material standards, requiring Safety Data Sheets and labels consistent with 29 CFR 1910.1200. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, including the conspicuous marking of storage temperature requirements and the inclusion of lot or batch numbers. Inspection and acceptance will occur at the destination. Payment and receiving reports must be processed electronically through the Wide Area Workflow system. All quotes must be submitted via the DLA Internet Bid Board System by August 18, 2026.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE7MC-26-T-194Y

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of one valve disk, identified by NSN 4820012554255 and part number DI405D1532BSC12-03 from OIC Valve Corp. The item is designated as a critical application item and must be delivered FOB destination to the USNS Guadalupe within 20 days. The original required delivery date is set for August 11, 2026. Compliance with specific technical and quality requirements is mandatory, including DLA packaging standards and MIL-STD-129 marking. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. Shipping must be conducted via the fastest traceable means, and parcel post is explicitly prohibited.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E7-26-Q-0299

This contract, identified as SPE8E7-26-Q-0299, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of commercial off the shelf flashlights, specifically part number 14513 from Streamlight Inc. The order consists of nine line items totaling 41 units, with delivery required within 60 days after the order is received. Shipments are destined for various locations, including the USNS Wally Schirra, USNS Cesar Chavez, Sweihan Air Base, and Fort Wainwright, Alaska, as well as the Royal Jordanian Air Force in Jordan. The contract mandates strict adherence to DLA packaging and quality requirements, specifically referencing MIL-STD-129 for marking and labeling and RP001 for palletization. If the materials are deemed hazardous under FED-STD-313, they must be packaged according to requirement IP025; otherwise, commercial packaging per ASTM D3951 is required. Inspection and acceptance will take place at the destination, with the shipping terms set as FOB Origin.

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E8-26-T-5156

This contract, issued by the Defense Logistics Agency, is for the procurement of two signal horns, identified by NSN 6350-01-651-1624 and Fiamm Technologies Inc part number 7227421. The solicitation number is SPE8E8-26-T-5156, with a required delivery date of August 11, 2026, and a delivery timeline of 20 days after order. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the Commander Naval Air Force Pacific Fleet at Naval Air Station North Island in San Diego, California. Strict adherence to DLA packaging requirements is mandatory, specifically RP001 and MIL-STD-129, with packaging standards varying based on whether the material is classified as hazardous under FED-STD-313. The contract also incorporates several technical and quality requirements, including the removal of government identification from non-accepted supplies and specific documentation for source approval requests.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE8E8-26-T-5155

This solicitation issued by the Defense Logistics Agency under number SPE8E8-26-T-5155 is for the procurement of two air conditioning filter elements, identified by NSN 4130-00-106-9766. The required filters must have nominal dimensions of 25 inches in length, 14 inches in width, and 1 inch in thickness, with a face velocity of 360 FPM. Delivery is required within 20 days after order. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the removal of government identification from any non-accepted supplies. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels and AQLs assigned to critical, major, and minor attributes. This is a fully competitive procurement based on military and federal specifications.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7L7-26-Q-2216

This contract is a firm fixed price solicitation issued by the Defense Logistics Agency for one power supply unit, part number GRSLPFC11-12476-1, manufactured by Technology Dynamics, Inc. The item is classified as a commercial restricted source item requiring government engineering source approval. It contains a sealed lead acid battery with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with shipping destined for the USS John S McCain. The contract specifies strict adherence to DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, and the shipment must be sent via the fastest traceable means as a high-priority NMCS delivery.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-195F

This contract is a solicitation issued by the Defense Logistics Agency for the procurement of safety relief valves, specifically NSN 4820015275298, used in oil and water separators. The requirement is split across four contract line items totaling seven units, destined for the USS Paul Ignatius, USS William P Lawrence, USS Truxtun, and USS Ralph Johnson. Delivery is required within 20 days, with FOB destination and inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and palletization requirements, including MIL-STD-2073-1E and MIL-STD-129 for marking. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components like batteries or sensors as specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-T-4755

This solicitation from the Defense Logistics Agency is for the procurement of one storage battery, identified by NSN 6140-01-481-1199. The contract requires delivery within 20 days after receipt of order and falls under NAICS code 335910. The procurement is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires. Additionally, all packaging must adhere to RP001 DLA requirements.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-195C

This contract is a solicitation from the Defense Logistics Agency for the procurement of one copper alloy ball valve with a .25 inch size, 4 PSI set pressure, and male NPT end connections. The item is identified by NSN 4820-01-561-9487 and is associated with several approved part numbers from Adrick Marine Group and Mueller Refrigeration Products. The delivery is required within 20 days after receipt of order, with a final required delivery date of August 11, 2026, shipping FOB Origin to the USS Iwo Jima. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included, prohibiting the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA. Inspection and acceptance will take place at the destination, and the shipment must be sent via the fastest traceable means, explicitly excluding parcel post.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2218

This contract, solicitation number SPE7L7-26-Q-2218, is for the procurement of storage batteries (NSN 6140-01-203-4912) under a firm fixed price agreement. The total requirement is split across five line items, totaling 25 units, with delivery expected 60 days after the order is placed. The items are designated as critical application items and must adhere to specific technical data packages and standards, including SAE-J537-2016 and MIL-STD-129R. Key requirements include a Type I shelf life of 60 months and strict adherence to hazardous materials packaging, marking, and shipping regulations. Due to previous damage reports, the cushion thickness for packaging has been upgraded to 2 inches. Inspection and acceptance will occur at the point of origin, with shipments destined for locations including Osan Air Base in South Korea. The contract also mandates compliance with DLA packaging requirements and specific sampling methods according to MIL-STD-1916 or ASQ H1331.

Battery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2107

This contract is for the procurement of 120 feet of hot rolled, annealed steel composite 416 metal bar with a 5.000 inch diameter and lengths between 10 to 12 feet. The material must be supplied in whole foot lengths and adheres to ASTM A582/A582M and SAE AMS2806 standards. Delivery is required within 5 days of order to the USA Depot in Tobyhanna, Pennsylvania, with a quantity variance allowed of plus 10 percent and minus 0 percent. Strict compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for award eligibility. The supplier must provide a Certificate of Quality Compliance with every shipment and ensure continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are applied via stamping or stenciling. Packaging and marking must follow MIL-STD-129 and ASTM A700 requirements to avoid product rejection.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2108

This contract is for the procurement of 60 feet of extruded flat aluminum alloy bars, specifically alloy 5086 with H-111 temper. The material must be 0.500 inches thick, 2.000 inches wide, and supplied in whole foot lengths between 8 and 12 feet. Delivery is required within 5 days to a destination in Yokosuka, Japan, with a quantity variance allowed of plus 10 percent and minus 0 percent. Compliance with the Qualified Suppliers List for Distributors is mandatory for award eligibility. The supplier must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the contract delivery order number, NSN, and material specifications. Packaging and preservation must follow MIL-STD-129 and ASTM B660 standards, and the product must meet various technical specifications including SAE AMS-QQ-A-200/5B and ASTM B666.

Nonferrous Forging

POSTED

about 6 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-T-5159

This contract, identified as SPE8E8-26-T-5159, is a solicitation issued by the Defense Logistics Agency for the procurement of one electrical heating element, part number 657-005-V2.0, manufactured by Wolf Advanced Technology Canada Inc. The item is identified by NSN 4520-20-004-2192 and is to be delivered FOB Origin with a required delivery date of August 11, 2026, and a delivery window of 20 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. It includes a prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements. The shipment is destined for the USS Kearsarge LHD 3 and must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post. Inspection and acceptance will occur at the destination.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 6 hours ago

DEADLINE