Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of NSN 3110012660893 Tape-Type Roller Bearing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of a commercial off-the-shelf tape-type roller bearing identified by NSN 3110012660893, to be delivered to The Timken Corporation in North Canton, Ohio. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 332991 indicating it falls under other fabricated metal product manufacturing. The solicitation was posted on July 17, 2026, and is intended to support defense-related logistics needs through the procurement of a standardized bearing component. The place of performance and office address details are unspecified, and no set-aside provisions or point of contact information has been provided. The contract can be accessed via the DIBBS portal using the provided link for further details.

General Info

Supply of NSN 3110012660893 tape-type roller bearing to Timken Corporation for DoD logistics under DLA.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332991 - Ball and Roller Bearing ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a commercial off-the-shelf tape-type roller bearing under NSN 3110012660893 for delivery to The Timken Corporation in North Canton, OH.

Similar Contracts

Same NAICS industry code

BEARING, BALL, ANNULARThe contract is for the procurement of 80 units of a ball annular bearing with NSN 3110-00-193-8528 under solicitation SPE4A6-26-T-09RN, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 162 days of award, with performance located at Tinker Air Force Base, Oklahoma. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must adhere to DLA specifications, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and the bearing must be physically marked per RQ017. Item Unique Identification is not required as specified by the service customer under DFARS 252.211-7003. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations; disclosure to foreign persons, including foreign nationals within the U.S., is prohibited without prior federal authorization. Only contractors with approved JCP certification, completed DOD export training, and DLA approval may access such data, per DFARS 252.225-7048. The NAICS code is 332991, and the primary point of contact is Charleen Weber, reachable via email and phone provided.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BUSHING, SLEEVEThe contract pertains to the procurement of a bushing sleeve identified by part number NAS76A3-023 and NSN 3120011290722, classified as a critical application item requiring strict adherence to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The item must comply with the basic non-government standard NAS76 Revision 11 dated 10/31/2018 and the quality assurance procedure QAP-13873 Revision B dated 12/11/2013. Inspection and acceptance occur at origin, with no tolerance for quantity variance. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization governed by DLA’s RP001 requirements, and all DLA technical requirements supersede ASTM standards. Unit of issue is each, with a total order quantity of 126 units split across three CLINs: one unit, thirteen units, and one hundred twelve units respectively. Delivery is FOB origin with a 169-day delivery window, and the original required delivery date is November 18, 2026, with a need ship date of January 20, 2027. The item does not require Unique Item Identification per customer request. The contract is issued under solicitation SPE4A6-26-T-09PK by the Department of Defense’s ASC Commodities Division and is to be delivered to three DLA distribution points: Cherry Point NC, Hill AFB UT, and San Diego CA, each with specified shipping addresses. All documentation and compliance are governed by DLA procedures, including transportation protocols C19 and C20.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARINGThis contract pertains to the procurement of a bearing identified by NSN 3120-01-106-7293 and part number 3120PL0731769, with a single unit quantity required to be delivered within ten days to Fort Bliss, Texas. The item is designated as a critical application item and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issuance date. Delivery is FOB origin, with inspection and acceptance occurring at the destination. The bearing must be packaged and preserved in strict accordance with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping material, and packaging codes, with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with corresponding verification levels or AQLs. Physical identification and marking requirements are enforced, and unit of issue is each (EA). The item is not required to have Item Unique Identification under DFARS 252.211-7003(c)(1)(i). The shipment must be sent via the fastest traceable means, excluding parcel post, and directed to a U.S. Army distribution unit at Fort Bliss under a designated military freight address and shipment control number. The procurement is governed under a federal contract issued by the Department of Defense, with Christian Ray as the primary point of contact, and the response deadline is set for August 3, 2026, with a required delivery date of May 14, 2026.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

CAP, PILLOW BLOCKThis contract pertains to the procurement of one pillow block cap, identified by NSN 3130-01-381-9844 and part number 2650-3536, supplied by Electric Boat Corporation. The item is designated as a critical application component and must comply with strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Mercury and mercury-containing compounds are strictly prohibited in the item itself, its packaging, preservation, and marking except for specific exempted uses such as batteries, fluorescent lights, and certain instruments, with additional containment requirements for those exceptions as defined by NAVSEA 5100-003D. The product must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with a palletization code U and no special marking. Packaging materials must not contain mercury, and the item must be shipped via traceable freight, explicitly forbidding parcel post delivery. Delivery is FOB origin within 20 days of contract award, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the required delivery date is January 2, 2026. The item is not subject to Item Unique Identification per Service customer request, and all contractual obligations are governed by DLA packaging and environmental compliance protocols. The contracting office is the ASC Commodities Division under the Department of Defense, with delivery directed to the Naval Sea Logistics Center warehouse in Mechanicsburg, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, SLEEVEThe contract is for 177 units of a sleeve bearing with NSN/Part Number 3120-01-491-2863, issued under solicitation SPE4A6-26-T-09PE by the Defense Logistics Agency’s ASC Commodity Division. Delivery is required within 169 days from award, with performance location in New Cumberland, Pennsylvania. The item is subject to stringent technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 certification for the vendor as a certified third-party assessment organization, physical identification and bare item marking requirements, and tailored higher-level quality controls applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at the manufacturer’s origin, and any non-accepted supplies must have government identification removed prior to return. Technical data associated with this item is controlled under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with an approved U.S./Canada Joint Certification Program credential, completed DOD export-controlled data training, and DLA-approved access may handle the controlled technical information. Packaging must adhere to DLA procurement standards, and all measuring and test equipment used in production must meet specified calibration and verification requirements. The solicitation opened on July 26, 2026, with responses due by August 3, 2026, and is classified as a federal procurement under NAICS code 332991.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

COLLAR, BEARINGThe contract outlines the procurement of a collar bearing with part number HS700575 and NSN 3110-01-734-2811, for a quantity of 205 units, under solicitation SPE4A6-26-T-09SH. Delivery is required within 335 days FOB origin, with no variance allowed in quantity. The item must comply with DLA’s technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and MIL-DTL-197M, which dictate preservation methods based on bearing type and closure, selection of protective lubricants, and quality assurance verification procedures. Packaging and marking must adhere to MIL-STD-129, with palletization following DLA-specific requirements. Preservation methods and protective compounds are strictly governed by technical tables within MIL-DTL-197M, and the contractor’s packaging facility must meet associated quality verification standards. Unit identification is not required per the service customer’s request, and government identification must be removed from non-accepted supplies. Inspection and acceptance occur at destination, with all packaging data specified in detail, including preservation methods, wrapping materials, and containment protocols. The contract is issued by the Department of Defense’s ASC Commodities Division, with performance at New Cumberland, PA, and contact managed by Marion Williams.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

LINER, BEARING HOUSIThe contract is for one unit of a liner, bearing housing with NSN 3130-01-705-7089 and part number 363-20279, issued under solicitation SPE4A6-26-T-09SP. Delivery is required within 20 days to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591, with FOB destination as the delivery point and inspection and acceptance also occurring at destination. The item is subject to stringent packaging requirements per MIL-STD-2073-1E and marking compliance with MIL-STD-129, and must be palletized according to DLA packaging standards. No special marking is required, and unit identification through Item Unique Identification is explicitly waived by the service customer. The contract incorporates technical and quality requirements referenced in the DLA Master List, including tailored higher-level quality standards, measuring and test equipment protocols, and documentation rules for source approval. Transportation must utilize the fastest traceable method, excluding parcel post, and shipments are to be coordinated through the VSM system with RDD 777. The supplier must comply with DLA procedures for defense information handling, government identification removal for non-accepted items, and all applicable DFARS clauses. The original delivery date is July 17, 2026, with no variance allowed in quantity, and the contract is active under the Department of Defense, administered by the ASC Commodities Division with primary point of contact Alexis Dunnavant.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BUSHING, SLEEVEThe contract is for a single bushing, sleeve with NSN 3120-01-500-4989, issued under solicitation SPE4A6-26-T-09SN by the Defense Logistics Agency’s ASC Commodities Division. The requirement is for delivery within 20 days of award and is subject to stringent technical and quality controls referencing the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and solicitation timeline. Cybersecurity compliance is mandated at CMMC Level 2 through a certified third-party assessment organization, and packaging must adhere to DLA standards. Inspection and acceptance occur at the manufacturer’s origin, and any non-accepted items must have all government identification removed. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons, including employees of U.S. companies and subsidiaries, and requires prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors holding valid US/Canada Joint Certification Program certification, having completed DLA-specific export control training and questionnaire, and receiving formal approval. Measuring and test equipment used in production must meet specified standards, and the item is classified under NAICS code 332991 with a federal procurement type. The point of contact for inquiries is Alexis Dunnavant, with responses due by August 3, 2026.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, SLEEVEThis contract pertains to the procurement of a sleeve bearing identified by NSN 3120-01-419-0207 and part number MS17796-123, manufactured through a metal casting process requiring specialized tooling. The item is classified as a commercial item and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan. Critical, major, and minor attributes are assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Acceptance requires zero non-conformances unless otherwise stated. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and mercury compounds strictly prohibited in preservation or packaging. Palletization follows DLA packaging requirements. The contract specifies delivery of five units FOB origin within five days, with no variance allowed in quantity and inspection and acceptance occurring at origin. The item is sourced under solicitation SPE4A6-26-T-09NT, with a required delivery date of July 28, 2026, and must adhere to the ASTM B438 Revision 21 standard. Manufacturing support and tooling inquiries should be directed to the Aviation or Land & Maritime Supply Chains assistance teams. The contract is issued by the Department of Defense’s ASC Commodities Division, with point of contact Robye Dewitt.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BUSHING, SLEEVEThe contract specifies the procurement of two BUSHING, SLEEVE units with NSN 3120-01-141-0889 and part number KR-2 from TE Connectivity Corporation, under solicitation SPE4A0-26-T-4058. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled in strict accordance with MIL-STD-129 and DLA Packaging Requirements. Packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, with palletization following RP001 guidelines. Items are to be shipped via the fastest traceable means, explicitly excluding parcel post, to the freight shipping address at Robins AFB, Georgia. The required delivery date is July 22, 2026, and the contract includes specific government-use identifiers and contact information for Danita Davis at DLA. The item is classified under NAICS code 332991 and is part of a federal acquisition administered by the Department of Defense’s Aviation Supply Chain ESOC Buys office.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

BEARING, PLAIN, SELF-AOfferors must comply with strict regulations regarding the supply of covered telecommunications equipment and services, as prohibited under FAR 52.204-24 and DFARS 252.204-7016, and are required to certify that no such equipment or services will be provided under this contract. Domestic material restrictions apply under the Berry Amendment, the Buy American Act, and related clauses, with the Berry Amendment threshold lowered to $150,000; vendors using non-domestic materials must disclose this information in their quote or via written notification. Small business joint ventures must submit required representations for eligibility under designated small business categories. The use of additive manufacturing for parts is expressly prohibited unless specific prior approval is granted by the contracting officer. Offerors are strongly encouraged to quote quantity ranges due to the volatile and fluctuating nature of open purchase requests, allowing buyers flexibility to consolidate or reduce quantities without re-solicitation, though this does not apply to Auto IDC. All contractors must register via the upcoming DLA Account Management & Provisioning System to access the Vendor Shipment Module and maintain shipping capability; those using VSM WebServices must update their internal schema by the stated deadline to avoid service disruption. Failure to submit a “No Bid” response on DIBBS for anticipated non-participation may result in assumptions of non-procurability and unnecessary administrative follow-up. The solicitation is for a plain self-aligning bearing, NSN 3120-01-358-6618, quantity 37 units, with a 28-day delivery requirement, and responses are due by August 3, 2026, with inquiries directed to Justin Willcox. Fast Pay is not applicable, and all offers must include current dealer or distributor certification details.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

BEARING, BALL, ANNULARThis contract specifies the procurement of 317 annular ball bearings under NSN 3110-00-155-8429, with a total price of $317.00 per unit and delivery required within 296 days FOB origin. The bearings are classified as commercial items and must be manufactured in the United States, its outlying areas, or Canada, with more than 50% of the total cost of all bearing components originating from these regions. A contractor declaration confirming the domestic or foreign origin of materials is mandatory and must be submitted upon request; failure to provide it will disqualify the bid. The item is designated as a critical application and is subject to stringent quality and packaging standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129 for marking and preservation. Preservation methods must align with the bearing type and closure as specified in referenced technical documents, and the contractor’s packaging facility must meet quality assurance verification requirements. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like batteries or instruments, and any exempted items must include secondary containment. Inspection and acceptance occur at origin, and no unit identification is required per customer request. Packaging must adhere to DLA-specific requirements, and all materials must comply with restrictions outlined in DFARS 252.225-7016. The solicitation may be canceled if no acceptable domestic sources are found, unless a waiver is approved.

ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

SENSING ELEMENT, FIRThe contract pertains to the procurement of a Sensing Element, FIR with NSN 6350375306236, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4850. Ten individual line items, each representing one unit at a unit price of $1.00, total a contract value of $10.00, with all deliveries required FOB destination within 20 days of the contract award. The material must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, commercial packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines. Hazardous materials must adhere to TQ requirement IP025. The delivery destination is USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with shipments required to be sent via traceable means using VSM and RDD 777, explicitly prohibiting parcel post. All items are to be inspected and accepted at the destination, with no quantity variance permitted. The supplier’s part numbers include CONSILIUM MARINE US INC 3EGT0 and CONSILIUM MARINE & SAFETY AB A188N, both referencing the same part number 90100040030-00A. The original required delivery date is July 22, 2026, and government-use-only fields indicate specific procurement tracking codes, including IPD, DIC, DIST, and ADV identifiers.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

SEALING COMPOUNDThe contract is for a sealing compound identified by NSN 8030-01-672-3450 and part number LOCTITE SI 595, supplied in 2.7-ounce clear containers, with a shelf life of 12 months extendable under Type 2 Code 4 requirements. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking, and specific packaging codes for hazardous materials under IP025. Each unit is packaged in a single transaction unit (TU) and must be delivered FOB destination within 20 days to the specified address in Gulfport, Mississippi. The product is subject to strict traceability requirements, prohibiting parcel post, and must be shipped via documented methods with marked tracking. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The sealing compound is classified as a hazardous material requiring particular handling, labeling, and documentation per DLA protocols, and the contract includes a zero variance on quantity with inspection and acceptance occurring at the delivery point. The procurement is part of a federal solicitation issued by the Defense Logistics Agency under SPE8ES-26-T-2445, with a response deadline of August 3, 2026, and an original required delivery date of July 28, 2026.

Wood Preservation

POSTED

about 17 hours ago

DEADLINE

HARNESS ASSEMBLY, MASK,The contract is for one unit of a harness assembly, mask, oxygen, identified by NSN 4240-01-392-6079 and part number 460-190-457, supplied by Interspiro Inc based in Branford, CT. Delivery is required within 20 days from the contract award, with shipment to be made FOB origin and delivered to the specified address in Gulfport, MS. The item must be packaged in strict accordance with MIL-STD-2073-1E, using packaging method 10, and labeled in compliance with MIL-STD-129 without special marking. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contract terms allow. All packaging, marking, and shipping of this non-hazardous item must follow applicable DLA procedures, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination point, with no variance allowed in quantity—exactly one unit is required. The contract is issued under solicitation SPE8E6-26-T-3869 by the Defense Logistics Agency and incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The item is procured using the DoD authorized unit of issue, and all government identification must be removed from non-accepted supplies. The contract includes specific transportation and shipping instructions tied to DLA procedural notes, and delivery must be achieved by the original required date of July 28, 2026. The point of contact for inquiries is John Lieb, and the procurement falls under NAICS code 339113. The item is designated for government use only, with associated control codes and identifiers applied for internal tracking and logistics coordination.

Surgical Appliance and Supplies Manufacturing

POSTED

about 17 hours ago

DEADLINE

MARKER, IDENTIFICATIONThis contract specifies the procurement of 3 packaging units (PG), with each unit containing 25 identification markers, totaling 75 units, under NSN 7690-01-320-2613 and part number Z-PSR8 from American Labelmark Company. The item is classified as a TYPE I (CODE H) with a non-extendable 12-month shelf life, requiring strict compliance with MIL-STD-129 for marking and packaging in accordance with MIL-STD-2073-1E. Packaging must avoid plastics as wrapping, cushioning, or dunnage materials, and must adhere to DLA’s packaging requirements. Delivery is to be made FOB origin within 10 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means, excluding parcel post, to a designated Army airfield in Fort Hood, Texas, under RDD 555 and project code TP 2. Special marking is not required, and the contract incorporates all applicable technical and quality standards from the DLA Master List of Requirements. Government use identifiers and shipping metadata are provided, and the contract is issued under solicitation SPE8E6-26-T-3863 with a required delivery date of July 22, 2026.

POSTED

about 17 hours ago

DEADLINE

FLOAT, VALVEThe contract specifies the supply of a FLOAT, VALVE with NSN 4820015106023, with a single unit required under two CLINs, each for one EA at a unit price of $1.00. Delivery is due within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance performed at the final delivery point. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The destination is the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with vessel shipment procedures and DLA transportation notes C19 and C20 applying. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in specific items like batteries, fluorescent lamps, instruments, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical specifications and mandates compliance with all applicable defense logistics standards. The original required delivery date is July 22, 2026, solicitation number is SPE7MC-26-T-154Q, and the responsible contracting office is under the Defense Logistics Agency with primary point of contact Paula McClary.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, BALLThe contract is for the procurement of six ball valves identified by NSN 4820-01-323-6165 and part number SPD-C1Q-A, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-154K. Delivery is required within 20 days of contract award to FPO AE 09573, with FOB destination terms and no variance allowed in quantity. The valves must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, using specific packaging methods including dry preservation, unit container type D3, and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited in or on the valves, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Shipment must be made using the fastest traceable means, excluding parcel post, and adhere to DLA transport procedures C19 and C20, with the shipment assigned to RDD 777 and linked to project LP5 TP 2. The valves will be inspected and accepted at the destination, with the required delivery date set for July 22, 2026.

Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

FILTER, AIR, ELECTROSThe contract specifies the procurement of one unit of an air filter designated by NSN 4460-01-691-5534, model P/N 3031-01059-32, manufactured by MAJR PRODUCTS CORP, for use by the USS CHEYENNE SSN 773. Delivery is required within 30 days after award, with the point of origin as the shipping point and destination acceptance at the delivery site. The item must be packaged in strict compliance with MIL-STD-2073-1E, using packaging code U and preservation method 10, and labeled in accordance with MIL-STD-129 without special marking. Palletization must meet DLA’s packaging requirements, and shipments must use the fastest traceable means—parcel post is prohibited. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with the applicable revision determined by the acquisition type and relevant dates. Transportation and shipment procedures follow DLAD Proc Notes C19 and C20, with the RDD code 777 required for tracking. The contract number is SPE8E8-26-Q-0440, with a response deadline of August 3, 2026, and the requirement is tied to a government purchase request numbered 7015459056, with a projected need date of February 6, 2026.

POSTED

about 17 hours ago

DEADLINE

CONDENSING UNIT, REFThe contract is for a single condensing unit for refrigeration, identified by part number D7AB-0150-TAD-001 MOD R134A and NSN 4130014795974, supplied by Emerson Climate Technologies Inc. CAGE 5L3D4, under solicitation SPE8E8-26-T-4847. Delivery is required within 20 days to the USS Ronald Reagan CVN 76 at FPO AP 96616, with FOB destination terms, zero variance allowed in quantity, and acceptance occurring at the delivery point. The unit must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, using preservation method code 10 per ASTM D3951, and must not contain mercury or mercury compounds except as expressly permitted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA, with portable mercury-containing items requiring shockproof design and secondary containment. All packaging and shipment must adhere to RP001 and the specified palletization and containment codes, with shipments directed via the DLA VSM system using the fastest traceable means—parcel post is prohibited. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date as applicable. The purchase request is 7017607400, with a total price of $1.00 for a single unit, and the original required delivery date is July 22, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

PLATE, INSTRUCTIONThis contract requires the delivery of two units of a plate instruction item identified by NSN 9905-14-398-3767 and purchase request 7017607377, with a firm fixed price of $2.00 per unit and a total value of $4.00. Delivery must be completed within five days of contract award, with shipments originating from the supplier's location and delivered FOB origin to the Puget Sound Naval Shipyard in Bremerton, WA. All items must comply with MIL-STD-2073-1E packaging standards and be marked per MIL-STD-129 without special markings, and palletization must follow DLA Packaging Requirements. The item is classified as a critical application and must not contain mercury or mercury compounds except in specific exempted uses such as batteries or fluorescent lamps, which must include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, and all supplies are subject to inspection and acceptance at the destination. Shipping must use the fastest traceable means—parcel post is prohibited—and the required delivery date is July 23, 2026. The contract is governed under solicitation SPE8E6-26-T-3867, which is administered by the Defense Logistics Agency with primary point of contact Brett Scull.

Sign Manufacturing

POSTED

about 17 hours ago

DEADLINE

MAGAZINE, CARTRIDGEThis contract specifies the procurement of 50 magazine cartridges with part number MAG291-MCT manufactured by MAGPUL INDUSTRIES CORP, under the NSN 1005-01-717-7475 and solicitation number SPE7L7-26-T-4453. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide registration documentation will disqualify any offer. The contract incorporates all applicable technical and quality requirements from the DLA Master List, which override other standards such as ASTM D3951, and mandates packaging in compliance with MIL-STD-129 and DLA packaging guidelines. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03, though unit identification is not required per the service customer’s request. Delivery is FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Shipment must be made by the fastest traceable means and cannot use parcel post, with destination details provided for both parcel and vessel delivery. The unit of issue is each, with no variance allowed in quantity, and the contract includes specific transportation and logistics directives referenced in DLAD Procurement Notes C19 and C20.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

BEAM, STRUCTURALThe contract pertains to the procurement of a structural beam with NSN 9540-01-446-2523, requiring one foot in quantity, to be delivered within five days of award. The solicitation, issued under SPE8E4-26-T-1926, was posted on July 26, 2026, with responses due by August 6, 2026. It falls under NAICS code 331491 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, with performance location specified as Fort Knox, Kentucky, ZIP 40121-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided web address, with revision control determined by the acquisition size and applicable solicitation dates. For simplified acquisitions, the revision in effect on either the solicitation issue date or award date applies; for large acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. The contract also mandates removal of government identification from any non-accepted supplies. Primary point of contact is Pamela Duffey, reachable via email and phone for inquiries, and the full solicitation can be accessed through the DIBBS platform.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 17 hours ago

DEADLINE

FILTER ELEMENT, AIRThe contract pertains to the procurement of one air filter element with NSN 4130-20-006-8403 and part number D259-05309, sourced from KNUDSEN ENGINEERING LTD, under solicitation SPE8E8-26-T-4853. The item must be delivered within 20 days FOB destination, with no tolerance for quantity variance, and is subject to full compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including no special marking. Packaging and palletization must conform to DLA’s DLA Packaging Requirements for Procurement, with all units shipped in compliance with DoD unit-of-issue specifications. Delivery is directed to two separate U.S. Navy vessels—USS STOCKDALE DDG 106 in FPO AP 96678 and USS BATAAN LHD 5 in FPO AE 09554—each requiring distinct shipping routes and transportation protocols, with vessel shipments mandating the fastest traceable means and explicit prohibition of parcel post. The contract references technical and quality requirements from the DLA Master List, effective on the solicitation or award date depending on acquisition size, and incorporates additional logistics and administrative controls including vendor shipment management codes, project tracking identifiers, and government-only disposition fields. The original required delivery dates are March 3, 2022 and March 9, 2023 respectively, though current need dates are unspecified.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE