Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Observation Windows (NSN-Based Manufacturing)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the manufacture and delivery of observation windows designed to meet military specifications, with production governed by standardized quality assurance protocols. Each unit must comply with ASTM D 3951 packaging requirements to ensure protection during transit and storage, and items valued above $5,000 are required to carry IUID marking for full traceability and asset management within Defense Logistics Agency systems. The work falls under NAICS code 332320, indicating classification within the metal window and door manufacturing sector, and is issued as a subcontract under the Department of Defense. The contract was posted on June 25, 2026, and is tied to the NSN-based manufacturing framework, ensuring alignment with existing military supply chain standards. Performance is expected to support DoD logistics operations nationwide, with all deliverables subject to strict compliance and documentation to maintain readiness and accountability across the defense supply network.

General Info

Manufacture and delivery of military-spec observation windows with IUID marking, ASTM packaging, under DoD subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332320

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7MX26FZ191.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

WINDOW, OBSERVATION

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 25

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 'WINDOW, OBSERVATION' units to military specifications, including quality assurance, packaging per ASTM D 3951, and IUID marking for items over $5,000.

Similar Contracts

Same NAICS industry code

Ruggedized Electronics and Instrument PackagingThis subcontract, issued by the NASA SBIR/STTR Program, focuses on the design and fabrication of aerospace-grade electronic interfaces and ruggedized enclosures. The primary objective is to develop hardware capable of maintaining reliable operation within the demanding conditions of dynamic flight environments. The opportunity is designated as a Total Small Business Set-Aside, specifically targeting firms with fewer than 500 employees under the SBIR/STTR mandate. Performance for this contract is centered in Cleveland, Ohio, under NAICS code 332320.

NASA SBIR/STTR Program

POSTED

DEADLINE

Electromechanical Controller Supply (Hoist Controller)This subcontract, issued by the Defense Logistics Agency under the Department of Defense, concerns the supply of a precision electromechanical hoist controller identified by NSN 6110015351641. The procurement is managed under CLIN 2818 and falls under NAICS code 332320. The contractor is required to ensure full compliance with all specified technical requirements, as well as strict adherence to packaging and marking standards. The contract was posted on August 17, 2026, and is associated with the award record SPE7LX21D0081.

Defense Logistics Agency

POSTED

DEADLINE

Precision Machined Bracket FabricationThis subcontract with the Defense Logistics Agency under the Department of Defense involves the manufacture of 62 precision-machined military brackets. The project requires strict adherence to technical specifications, quality assurance, and comprehensive traceability to ensure successful integration into defense systems. The contract is categorized under NAICS code 332320 and was posted on August 17, 2026. It focuses on high-precision fabrication standards necessary for military-grade hardware, emphasizing the critical nature of the components for defense applications.

Defense Logistics Agency

POSTED

DEADLINE

Traffic Signage and Wayfinding

Jamaica Social Investment Fund

POSTED

about 1 month ago

DEADLINE

Aircraft Stiffener SupplyThe contract pertains to the manufacture and supply of aircraft structural stiffeners as specified in the contract deliverables and CLINs, under a subcontract arrangement issued by the Defense Logistics Agency through the Department of Defense. The work is classified under NAICS code 332320, which aligns with aircraft parts and auxiliary equipment manufacturing, indicating the technical nature of the components to be produced. The contract was posted on August 5, 2026, and is administratively linked to the award number SPE4AX24D9408 with delivery order SPE4AX26F329E and contract number 87, indicating it is part of a broader procurement effort. While no specific place of performance or point of contact is provided, the scope implies direct support to defense aviation systems, with production requirements aligned to stringent military specifications. The contract does not specify a set-aside type, suggesting it is open to any qualified contractor.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Aircraft Fluid System Duct AssemblyThe contract entails the fabrication and assembly of fluid system ducts for aircraft, covering critical components such as air conditioning, fuel, and hydraulic lines, all constructed from corrosion-resistant materials to ensure durability under extreme operational conditions. Precision welding techniques are required to meet stringent aerospace standards, ensuring leak-proof, high-integrity connections that maintain system reliability in demanding environments. The work is classified under NAICS code 332320, indicating a focus on aerospace product and part manufacturing, and is structured as a subcontract under the Department of Defense’s Defense Logistics Agency. Performance is expected to align with military and industry specifications for safety, quality, and material compliance, though the exact location of performance and point of contact are not specified. The solicitation was posted on August 5, 2026, and is linked to award S4AX26F329F under the base contract SPE4AX24D9408.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Component Manufacturing for P/N: 56220-000The contract is for the production of high-value components or sub-assemblies associated with part number 56220-000, involving precision machining, sheet metal fabrication, or structural assembly processes. It is categorized as a subcontract under the NAICS code 332320, indicating it falls within the scope of forgings and stampings manufacturing. The work is being managed by the Defense Logistics Agency under the Department of Defense, with the solicitation posted on August 4, 2026. While specific performance location details are not provided, the contract is tied to a defense-related logistical framework and requires adherence to high-quality standards typical of military-grade component manufacturing. The contract number and delivery information are accessible through the DIBBS system, ensuring traceability and compliance within DoD procurement channels.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Precision Electrical Connector Manufacturing & SupplyThe contract involves the manufacture and supply of four precision electrical coupling nuts identified by NSN 5935016536928, aligned with military specifications MS3186G and MIL-DTL-26482J, ensuring compliance with rigorous defense standards for performance and durability. These components are critical for reliable electrical connectivity in military systems and must meet exacting tolerances and material requirements dictated by the referenced military standards. The contract is structured as a subcontract under the broader procurement framework managed by the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332320 indicating classification under other electronic component manufacturing. The award was posted on August 3, 2026, and the place of performance and specific delivery location are not designated beyond the overarching agency jurisdiction. The contract is administered through the DLA’s electronic procurement system, with the official record accessible via the provided DIBBS link, ensuring transparency and traceability in fulfillment and delivery.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Road Signage and Safety MarkingsThe contract involves the fabrication and installation of traffic signs and safety markings as part of a road rehabilitation project under the Rural Agricultural Development Authority, which is an agency of the Government of Jamaica. The work is classified under NAICS code 332320, indicating it is a subcontract related to metal fabrication for transportation equipment and signage. The contract was posted on August 3, 2026, and is intended to enhance road safety through the proper placement of regulatory, warning, and guidance signs along the rehabilitated roadway, ensuring compliance with traffic control standards. While specific performance locations and point of contact details are not provided, the scope clearly focuses on delivering durable, high-visibility safety infrastructure to support improved transportation conditions in rural areas.

Rural Agricultural Development Authority

POSTED

about 1 month ago

DEADLINE

Welding and Metal Fabrication ServicesThe contract entails the structural welding and metal fabrication of housings and brackets specifically designed for damper units, utilizing TIG and MIG welding techniques to ensure precision and durability. Post-weld finishing will be performed to meet required mechanical and surface standards, ensuring the final components are fit for high-performance applications within demanding operational environments. The work falls under NAICS code 332320, classifying it as metal fabrication services, and is structured as a subcontract under the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 21, 2026, with no set-aside designation specified, indicating it is open to all qualified contractors. Performance location details are not provided, and no point of contact information is listed, but the contract is accessible via the DIBBS portal under identification SPE4A626P9869. The nature of the work suggests the need for certified welders with experience in aerospace or defense-grade metal assembly, and compliance with military or industrial quality standards is implied through the contract's association with the Department of Defense.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Manufacture of Aircraft Rib and Stiffener ComponentsThe contract entails the precision machining, forming, and assembly of structural aircraft components, specifically ribs and stiffeners made from metal alloys, identified by NSN 1560-01-726-0639. These parts are critical to airframe integrity and must meet exacting aerospace standards for dimension, material composition, and finish. The work falls under NAICS code 332320, indicating it is a specialty machining and metal fabrication task performed under a subcontract arrangement, though the prime contractor or direct customer is not specified. The contract was posted on July 21, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. While no specific performance location or point of contact is provided, the components are intended for military aircraft systems and must comply with all applicable defense quality and delivery requirements. The absence of a set-aside designation suggests the opportunity is open to all qualified vendors, and the associated award reference number is SPE4A625PU828.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

Precision Machining and Truss Assembly FabricationThe contract for Precision Machining and Truss Assembly Fabrication encompasses the manufacture of critical truss components through precision CNC machining, welding, heat treatment, and final assembly, all performed to stringent aerospace and military specifications. The work is subcontracted under the Department of Defense, with the Defense Logistics Agency as the overseeing organization, ensuring compliance with defense-grade quality and performance standards. The North American Industry Classification System code 332320 confirms the nature of the work as metal forging and stamping, with an emphasis on precision fabrication for defense applications. Performance of the contract is expected to occur under the regulatory framework of federal defense procurement, though specific location details are not provided. The solicitation was posted in July 2026 and is identified by the contract number SPE4A726P5566, indicating it is part of a larger defense acquisition initiative. The components produced will be integral to structural systems requiring high reliability, dimensional accuracy, and material integrity under extreme operational conditions.

Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 21 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four decals, identified by NSN 7690012629486 and Boeing part number BACM9L10AVM. This acquisition is an FMS requirement for Greece, with a rapid delivery schedule of five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Delivery, inspection, and acceptance are all set as FOB Origin, with the final destination located in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Palletization must comply with DLA packaging requirements (RP001), and the use of plastics for wrapping or cushioning should be avoided where possible. Administrative requirements include electronic invoicing and receiving reports via the Wide Area WorkFlow system. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions under the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Commercial Printing (except Screen and Books)

POSTED

about 21 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency (DLA) Land and Maritime has issued solicitation SPE7L7-26-Q-2417 for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The requirement specifies a delivery timeline of 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This contract carries stringent security and regulatory requirements. It requires CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export control under ITAR and EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, the vendor must adhere to MIL-STD-2073-1E Level B for packaging and MIL-STD-129 for marking. Because the items are hazardous materials, the contractor must provide a HAZDEC form and Material Safety Data Sheets in accordance with FED STD 313D and DFARS 252.223-7001.

Battery Manufacturing

POSTED

about 21 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS